Bro, u did a vid on why ur intake ports are usually rough and exhaust are polished smooth. And I agree with ur theory fully . I am an outboard technician who lives on an island in the caribbean alot of 2stroke outboard here. I also modify a few Yamaha's and tohatsu's . I believe our quest to find the perfect balance between torque without killing rpm is the same. There is this one lil mod I do on all my intake ports. I get the smallest round bur bit I can find and do lil dimples ,like a golf ball has on it. Helps it travel thru the air faster. I would love to see u do it on one of those saws. Think it will be an interesting vid. Have a blessed year my brother
@@nickfoy7430rumors going around that Indiana likes to steal chainsaws to! What a bum and to be so incredibly stupid to show the serial numbers on the saw he stole WOW what a pile thief sh** he is!!!…along with his buddy novice jack off that begs for money constantly on his channel and they got mad & jealous because dude wouldn’t give them free chainsaws so resorted to begging him for free chainsaws 😝 and got so embarrassed from the begging they just started stealing them…Made up lies saying they need to test the saws as if they are some kinda authority on what a good chainsaw is haha!! when in fact they are all about to be in a ton of trouble no matter what they say and the serial numbers did them in
Hot damn tht one 460 nos saw tht u ran in ur shop wow And ya U definitely know wht ur doin with those 500i’s they run damn good Any saw u touch runs good though
John: here’s a stupid question: if I install a pop up piston on my chainsaw if it’s BDC at all times do I still have to mess with the timing..? I know I have to check squish with the soldering wire.
I say do what you like to do John people going to hate no matter what I love seeing pissed saws in the wood but I also like seeing a different perspective on builds I do my own but refuse to build for others just because when I did in the past they always ignored my warnings and blew up perfectly good saws and while I have no intentions of building hybrid saws because I have no use for one in the woods I do love to see your builds so keep doing what makes you happy and let the haters hate cause that’s what they do and the more they hate the better you must be doing so I say hate away 🤙
Dear John, I wish I were writing you for other reasons, but I just can’t continue our relationship feeling the way I feel right now. You came into my life like a wrecking ball into a building, and now your gone. But I’m left here to clean up the destruction left behind. I cannot and will not continue making excuses in my mind for why you have disappeared. I hope you find the part of you that you’re searching for. Sincerely, Penelope 😭
New Sub fae Scotland !! Came over from "Guilty of Treeson" after watchin you port his 200! Sorry if I'm a little slow mate,,,, ran out of speed 🤣🤣 Just watched "Rule No1" video , so here I am !! I think I could give you a good run for you're money when I'm on my kind of NOS😂🤣😂 Cheers Ps, I love your honesty!!!
The content is legit bro…keep that shit up…I’m a climber from TN and I have built a few big saws but lately iv been working a lot on 192,193,and 194t I would love to see a hybrid 194t-200t or 201t.and btw thx for the 660 carb tip for the 440, mines running better than ever now lol
I kinda get the timing but how do you know how much to take off when porting and if you re time it how do you know if your going to make power or performance or just kill the motor
Hey, John. Hope all is well. Got rid of my social media a while back so i couldnt dm you. Any word on that saw i sent you? Thanks, have a great Christmas!
I live in north Idaho. I have a 661 with wcs bark box and a high flow air filter. I'm ordering a wiseco race piston. Do you know any shops near me that could port and polish.im also looking to modify a 500i injection system and an after market coil for my saw. I run a 74" bar,404 x 063,harvester milling chain(saw only mills on a grandberg mill)
This is a shame, a guy comes out the gate so strong and then just falls off and stops making videos like you. Hate to see it happen cause you made fun videos and you were really picking up momentum with subs. I think the channel could have easily been the biggest saw channel on TH-cam. Hope you’re ok and hope you come back eventually.
I see your from Mn I am also. I’ve been thinking about having my 372 xtorq woke up a bit. Is that something you’d be interested in? If so how do I get in touch with you on it?
I messaged you a couple weeks ago about dipping plastic parts ...I learned how by your video on it so thank you....!!!!....My question I messaged you was do you have any ideal how I can get sthil orange as well as Husqvarna orange? I hoped you might have a special rit die mix that you might could explain????? I like your channel....I restore older logging saws mostly sthil and Husqvarna....if you ever are looking for pro grade saws to hot rod or whatever I have about 30 maybe 35 saws ...anything that's logging grade in a sthil or Husky I HV them most all are runners....I restore them one by one as a hobby.....if you could help me on the dye that would be great ...I was base coat clear coat painting til I saw your dye video
@@jeremylyons6252 I only have one 066...They are one of the hardest saws I try to find....I thought I had two but after running the numbers I found the other to be a 660....I build my 660 saws the way sthil built the 066....I use a 66 carb on all them ...But the the 066 I have is the only true 66 I own and it's a nice saw not been used much ...I bought it from a man in his 80s....My plans for it was to clean it and shine it up .....put new decals on it and sit it on the shelf ...People seem to really desire those saws....I'll say they do perform well....I have about 5 660 and since I got a 066 I was able to make them run better by seeing how sthil set up the 66....basicly EPA is why the two saws don't run the same ....I guess back when the 66 was built thing were more lax....If you want to email me ..countryboykip1967@gmail.com....I'll talk to you about it ....I don't really want to do buisness on you tube ....I can tell you it's a nice saw but all my saws I restore to new condition before I sell them ....Which in this case it just needs cleaning and decals it's not been used enough to need anything else ...PM me and I'll talk to you about it.....I have a very nice 460 also .......those are a very mean saw
@@jeremylyons6252 I also have a 372xp I have not redone yet ..,.I have 4 of the 2100 husky which is a 100cc saw ...they out perform most saws ....I have a 3120xp that I've got to put a cylinder and carb on it....the saw doesn't have a nick on it really nice saw I bought it in Texas they used parts off it to keep a older 3120 milling so all the plastic is like new on it.....I plan to take this saw completely apart bc it looks to good to be true
@@jeremylyons6252Ok I'll send you one back later this evening....Where are you located? I live in Western KY Mayfield actually....We are the town last Dec that had the tornado that stayed on the ground for two hundred miles. ..I have never bought or sold a saw that wasn't in driving range
Hey John. Are you able to help me with a colour match for dyeing Stihl orange and Husky early2000’s orange please? Looking forward to your next vids. Thx
I like to hear you commentary as it is no BS. The video was ok, but I like to hear you talk. So I guess that means this video sucked….just saying! Bring those 500s to life!🔥
The people who are mad, because you "talk too much", are just pissed because they don't understand what you are saying. That said, 15 minutes of saws running isn't bad either.
Porting can mean a number of things: The process of re-machining the ports and chamfering edges for better airflow and more power. Polishing the cylinder and tightening tolerances. Advancing/retarding the timing. It can also include a base gasket delete which improves the squish band. It's the same idea behind hot-rodding cars.
Hi I'm John Turpin I got a saw I don't know what it is spell ID is missing I will send you a picture of the song I'm wondering if you could get back to me on it tell me exactly what song is I did do a research on the song serial number it says that it doesn't exist
Hey John, come back dude. We. Miss the shenanigans. Just saying, you have a fan base just waiting. Who cares about haters? They suck anyway. Hope you and the family are ok. Even just a a small update...
Hey brother haven’t see😢anything from you in a long while just messaging you to see if everything is ok and you in good health. I really hope all is well so if your ok Ross out a community post on the community tab. Ttyl brother
You need to get back to the people who’s saws you have! Couple of years is an absolute joke! I USED to respect you, loved your videos too! Lost all respect for you now!
Ill send you my 241 if you want to make it a little beast. No one has modded one. You can be the first with mine. Ill pay for mods You still need to learn to sharpen
He has been in court getting sued by people that he stole saws from. Myself included. Has every excuse in the book and will never be a real man of his word. I feel bad for his children that have to grow up with a terrible reputation John has put on their family name. A lot of us would be very happy if he disappeared and never returned. #canceljohnalvord #thief #criminal #scumbag
Kinda need a response because I was just scammed for $160 for a max air flow for a 500i and an exhaust mod attachment. Totally not happy and maybe a scam not to you but someone using your information and TH-cam. Just pissed!
Obviously he cares nothing about the people who try to support him he dips and never said hey guys I’m done with TH-cam I’ll be back thank god for the other guys on here that respond. Hopefully your doing alright John and good luck I’m an unsubscriber at this point
Thinking of our favorite badass TH-camr....we miss you Mr John.
I check in on your page a few times a month to see if there's any updates. I hope you and yours are doing well. Happy New Year!
Even a quick video just stating your still around and busy would be great, starting to wonder/ worry
Hey John hope all is well I will keep you and your family in my prayers!
Is he okay?!
I'd have to say you know how to build a saw... You especially have those 500's figured out!... Damn things sound just fu*king rowdy!! Build on🤘
Nothing wrong with you talking brother you are a wealth of knowledge ur videos are awesome keep up the good work doing what you love
Bro, u did a vid on why ur intake ports are usually rough and exhaust are polished smooth. And I agree with ur theory fully . I am an outboard technician who lives on an island in the caribbean alot of 2stroke outboard here. I also modify a few Yamaha's and tohatsu's . I believe our quest to find the perfect balance between torque without killing rpm is the same. There is this one lil mod I do on all my intake ports. I get the smallest round bur bit I can find and do lil dimples ,like a golf ball has on it. Helps it travel thru the air faster. I would love to see u do it on one of those saws. Think it will be an interesting vid. Have a blessed year my brother
John, Hope you and the family are well. Really enjoy your videos.
Im building a nos saw. Wont look great but I like them. I have a spare Husky 61. Thanks for sharing and hope you get well
Awesome video for those of us who just love the sound of a tightened up 2stroke. Keep it ripping brother.
Best of luck on the health issue sir.
Ramble on all you like, your tech videos are great.
Always good to see a video from you after I get outta work. Good times.
Miss these great video's man..
I say do your thing man. The more you talk, the more we learn. Fuck the haters
Hope your doin alright bud
You should totally come to SAW FEST next year. You saws would fit right in👍🏻👍🏻👍🏻
He’d probably get his ass beat , given the amount of saws he’s not returned , to paying customers ….
Hmmm, I’ve been hearing some interesting things myself. Hoping John will clear this all up.
Any updates?
@@nickfoy7430rumors going around that Indiana likes to steal chainsaws to! What a bum and to be so incredibly stupid to show the serial numbers on the saw he stole WOW what a pile thief sh** he is!!!…along with his buddy novice jack off that begs for money constantly on his channel and they got mad & jealous because dude wouldn’t give them free chainsaws so resorted to begging him for free chainsaws 😝 and got so embarrassed from the begging they just started stealing them…Made up lies saying they need to test the saws as if they are some kinda authority on what a good chainsaw is haha!! when in fact they are all about to be in a ton of trouble no matter what they say and the serial numbers did them in
Hot damn tht one 460 nos saw tht u ran in ur shop wow
And ya U definitely know wht ur doin with those 500i’s they run damn good
Any saw u touch runs good though
Dam that was a badass video. Please make more.
He has vanished for like the last 2 yeahrs ... I dont think there will BE any Videos ever again
Be epic to see more content 🤘 hope all is well
I think you are polite,--not talking when the saws are "singing". :)
what a lot of awesome saw power! especially the hybrid 500i is a monster!
I want one
Last video was 2 months ago What is going on, I'm concerned
John: here’s a stupid question: if I install a pop up piston on my chainsaw if it’s BDC at all times do I still have to mess with the timing..? I know I have to check squish with the soldering wire.
Hey John. Merry Christmas to you and your family. Hope everything is going great and next year kicks this one's ass. ✌️
i would love to seee the 500i on nos haha
I say do what you like to do John people going to hate no matter what I love seeing pissed saws in the wood but I also like seeing a different perspective on builds I do my own but refuse to build for others just because when I did in the past they always ignored my warnings and blew up perfectly good saws and while I have no intentions of building hybrid saws because I have no use for one in the woods I do love to see your builds so keep doing what makes you happy and let the haters hate cause that’s what they do and the more they hate the better you must be doing so I say hate away 🤙
U build a wicked saw man love em. Hope all is well
Dear John,
I wish I were writing you for other reasons, but I just can’t continue our relationship feeling the way I feel right now. You came into my life like a wrecking ball into a building, and now your gone. But I’m left here to clean up the destruction left behind. I cannot and will not continue making excuses in my mind for why you have disappeared. I hope you find the part of you that you’re searching for.
Sincerely, Penelope 😭
What’s better ported or big bore? Or why not do both?
Some nasty machines my guy 😎👍
New Sub fae Scotland !! Came over from "Guilty of Treeson" after watchin you port his 200! Sorry if I'm a little slow mate,,,, ran out of speed 🤣🤣
Just watched "Rule No1" video , so here I am !! I think I could give you a good run for you're money when I'm on my kind of NOS😂🤣😂 Cheers Ps, I love your honesty!!!
Watching this on November 2 did you fall off the face of the earth again??
He’s taking a break for how many strikes he’s gotten he will be back soon how i know is he is my neighbor
@@Pronto8905so you know about him keeping peoples saws?
Oliviera lost 💔
@@Pronto8905what did Garbage TH-cam give him strikes for? I was wondering how he was doing.. is he still porting saws or no?
@@Pronto8905please let him know that we're here for him! Hope he is doing well!
Another thing. Jiffy comes in snack packs. Time to send those haters a start up pack. 😂
The content is legit bro…keep that shit up…I’m a climber from TN and I have built a few big saws but lately iv been working a lot on 192,193,and 194t I would love to see a hybrid 194t-200t or 201t.and btw thx for the 660 carb tip for the 440, mines running better than ever now lol
Too busy not giving guys their saws back
8:00 min. 461 is just sick!
How much do you charge just to do a port job?
Talk, pass the info & show some power sawing also. Thanks John.
Hope all is well, miss hearing you TALK. Trapper Scotty, Alaskan
John still around anywhere?
Good stuff man!! Love it
Anybody know whats up with John? been a long time since he has uploaded...
Hopefully in jail if all the accusations are true about taking saws, parts and money.
What 2stroke oil do you use in your saws
Your 200 cuts better than my bigger saws.
I kinda get the timing but how do you know how much to take off when porting and if you re time it how do you know if your going to make power or performance or just kill the motor
Guess he’s checked out
John , hope your doing well. Whats up with you. Long Time we didnt see anything about your work. When is the Muffler Video coming up?
John if I buy a new 500i how much for u to.make it sick?
Any updates on how john is doing?. Miss the videos. Hope all is well with you!!!
Hey man! Really missing your crazy videos. Hope all is well!
They are just mad. You can walk the talk.
Hey, John. Hope all is well. Got rid of my social media a while back so i couldnt dm you. Any word on that saw i sent you? Thanks, have a great Christmas!
G’day John, When are you coming back to post some videos. I like to hear you talk…..
We're still missing you. Prayers 🙏 🙏 🙏 for you and your family.
You do beautiful work! Wish you could port my 500i. Have you ever heard of ripsaw? Kinda expensive but do they do a good job?
Have you tried putting a Vito power jet in anything
John! Where have you been Buddy? we miss you,
hope all is well.
So what are the negatives of modifying a new saw like this?
You keep talking John and I’ll keep learning from ya!! 😂
Talking of learning what would you suggest for porting an old 038 mag?
That's some Sick Power there John!! You don't have to talk! 👀🤣🤣😂🤣😂 So how do I get my hands on one of those?
What's the reason that you don't do the 200t anymore?
I live in north Idaho. I have a 661 with wcs bark box and a high flow air filter. I'm ordering a wiseco race piston. Do you know any shops near me that could port and polish.im also looking to modify a 500i injection system and an after market coil for my saw. I run a 74" bar,404 x 063,harvester milling chain(saw only mills on a grandberg mill)
How much for a ms180 with your magic?
Or if u have a sick 500 hybrid how much u want for it?
This is a shame, a guy comes out the gate so strong and then just falls off and stops making videos like you. Hate to see it happen cause you made fun videos and you were really picking up momentum with subs. I think the channel could have easily been the biggest saw channel on TH-cam. Hope you’re ok and hope you come back eventually.
Where ya been man?
I see your from Mn I am also. I’ve been thinking about having my 372 xtorq woke up a bit. Is that something you’d be interested in? If so how do I get in touch with you on it?
Keep talking, you've got a lot of interesting things to say.
Would like to get a price on porting a 461? would like to know how to contact you ?
Are you still going to port an MS-250?
Where are you based out of? I got some saws i need worked on. Im based in snohomish county wa
I messaged you a couple weeks ago about dipping plastic parts ...I learned how by your video on it so thank you....!!!!....My question I messaged you was do you have any ideal how I can get sthil orange as well as Husqvarna orange? I hoped you might have a special rit die mix that you might could explain????? I like your channel....I restore older logging saws mostly sthil and Husqvarna....if you ever are looking for pro grade saws to hot rod or whatever I have about 30 maybe 35 saws ...anything that's logging grade in a sthil or Husky I HV them most all are runners....I restore them one by one as a hobby.....if you could help me on the dye that would be great ...I was base coat clear coat painting til I saw your dye video
Kip Myers, You got any 066 stihl or 372 or 395xp saws a man could buy?
@@jeremylyons6252 I only have one 066...They are one of the hardest saws I try to find....I thought I had two but after running the numbers I found the other to be a 660....I build my 660 saws the way sthil built the 066....I use a 66 carb on all them ...But the the 066 I have is the only true 66 I own and it's a nice saw not been used much ...I bought it from a man in his 80s....My plans for it was to clean it and shine it up .....put new decals on it and sit it on the shelf ...People seem to really desire those saws....I'll say they do perform well....I have about 5 660 and since I got a 066 I was able to make them run better by seeing how sthil set up the 66....basicly EPA is why the two saws don't run the same ....I guess back when the 66 was built thing were more lax....If you want to email me ..countryboykip1967@gmail.com....I'll talk to you about it ....I don't really want to do buisness on you tube ....I can tell you it's a nice saw but all my saws I restore to new condition before I sell them ....Which in this case it just needs cleaning and decals it's not been used enough to need anything else ...PM me and I'll talk to you about it.....I have a very nice 460 also .......those are a very mean saw
@@jeremylyons6252 I also have a 372xp I have not redone yet ..,.I have 4 of the 2100 husky which is a 100cc saw ...they out perform most saws ....I have a 3120xp that I've got to put a cylinder and carb on it....the saw doesn't have a nick on it really nice saw I bought it in Texas they used parts off it to keep a older 3120 milling so all the plastic is like new on it.....I plan to take this saw completely apart bc it looks to good to be true
@@kipmyers5897 i sent you a email
@@jeremylyons6252Ok I'll send you one back later this evening....Where are you located? I live in Western KY Mayfield actually....We are the town last Dec that had the tornado that stayed on the ground for two hundred miles. ..I have never bought or sold a saw that wasn't in driving range
Are you still going to build a ms 250
Hey John. Are you able to help me with a colour match for dyeing Stihl orange and Husky early2000’s orange please? Looking forward to your next vids. Thx
Jarrod just said hes not communicated with him in a while.... Hes guilty of Treason if you didnt know. He built him a 200t I think.
How much do you charge to port a 372xp saw ?
Better do some research on him. Lots of people lost their saws and money. He didn't just cut off TH-cam.
Where you at dude it’s been like 2 weeks
Where have you been????
I like to hear you commentary as it is no BS. The video was ok, but I like to hear you talk. So I guess that means this video sucked….just saying! Bring those 500s to life!🔥
I hope you are doing okay
No more videos 😢
Bro how the h*** does that in NOS 500I stay together 😅
Hey John, have any stickers for sale?
The people who are mad, because you "talk too much", are just pissed because they don't understand what you are saying. That said, 15 minutes of saws running isn't bad either.
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Where do I get some of your stickers bro
What does the term "ported saw" or "to port a saw" mean?
If porting a saw is such a good thing why don't the manufactures just do it?
Porting can mean a number of things: The process of re-machining the ports and chamfering edges for better airflow and more power. Polishing the cylinder and tightening tolerances. Advancing/retarding the timing. It can also include a base gasket delete which improves the squish band. It's the same idea behind hot-rodding cars.
new vids?
Hi I'm John Turpin I got a saw I don't know what it is spell ID is missing I will send you a picture of the song I'm wondering if you could get back to me on it tell me exactly what song is I did do a research on the song serial number it says that it doesn't exist
Hey John, come back dude. We. Miss the shenanigans. Just saying, you have a fan base just waiting. Who cares about haters? They suck anyway. Hope you and the family are ok. Even just a a small update...
Johns custom saws nu mai faci TH-cam 2024?
Hey brother haven’t see😢anything from you in a long while just messaging you to see if everything is ok and you in good health. I really hope all is well so if your ok Ross out a community post on the community tab. Ttyl brother
You need to get back to the people who’s saws you have! Couple of years is an absolute joke! I USED to respect you, loved your videos too! Lost all respect for you now!
I'd like to see someone make a supercharger for a chainsaw and see how it can perform, I'm not talkin about a turbocharger I mean a supercharger.
Ill send you my 241 if you want to make it a little beast. No one has modded one. You can be the first with mine. Ill pay for mods
You still need to learn to sharpen
Yeah what happened to this guy hope he's okay
Where'd you go
I miss you so
Seems like it's been forever
Since you've been gone
He has been in court getting sued by people that he stole saws from. Myself included.
Has every excuse in the book and will never be a real man of his word.
I feel bad for his children that have to grow up with a terrible reputation John has put on their family name.
A lot of us would be very happy if he disappeared and never returned.
#canceljohnalvord #thief #criminal #scumbag
Hi! I hope your day is going well. I recommend watching the latest crime documentary video. Feel free to share your emotions with me.
Sent you a message via cell phone. Hope all is well with you and your family! If all is good, we all are Jonesing for Videos!
Kinda need a response because I was just scammed for $160 for a max air flow for a 500i and an exhaust mod attachment.
Totally not happy and maybe a scam not to you but someone using your information and TH-cam.
Just pissed!
Obviously he cares nothing about the people who try to support him he dips and never said hey guys I’m done with TH-cam I’ll be back thank god for the other guys on here that respond. Hopefully your doing alright John and good luck I’m an unsubscriber at this point