Resealing a 300Tdi power steering pump

แชร์
ฝัง
  • เผยแพร่เมื่อ 3 พ.ย. 2024

ความคิดเห็น • 44

  • @craig_chaznibond452
    @craig_chaznibond452 6 ปีที่แล้ว

    I can't believe I'd never heard the tip about putting grease on a dry gasket! I feel like a right plank!

  • @vincea1401
    @vincea1401 3 ปีที่แล้ว +1

    Hello Mike,,any feedback about thé pompe thay you saved with thé gasket ?
    Is it strong ?

  • @JohnnyM6030
    @JohnnyM6030 3 หลายเดือนก่อน +1

    Hi Mike, please could you put the link to where you got the gasket from !!!
    Cheers John

    • @BritannicaRestorations
      @BritannicaRestorations  3 หลายเดือนก่อน +1

      www.ebay.co.uk/itm/134215957050?itmmeta=01J2E2KKHMQ89SEMDGCJ87R7R7&hash=item1f3fe4fa3a:g:RQUAAOSwPfRjD3jM&itmprp=enc%3AAQAJAAAA8ER8IeJgvlprj6sCoQ9ffnbOK7MRgRqSsv%2BApcNhHSlaCMDPbuybPJFWc7aSad7FfmDetkFz8SJOZ25%2BHYc%2BgsC1LFrksTF8mD5TZ3LhPm5TxuVgxi5x6aaNmZVg5JZ0VO27QiRSSUVzGG3R%2Bv8iZrsEcy2v9BTfigfN8ESEUJa%2BWaXt2QfYqhYAg9u01yCMV1%2FjmslyDMfBdG6C0CdfabBw5A%2BWGH87XD6QSJo6zVoRlgVGfwf%2BmCFAuhbApYDHybcmgX3zZKDvfWGniMYqlIYs70MUe7Oth4c9Bl7uTH4r4lWMxH7NZHn2k75J5iBUlQ%3D%3D%7Ctkp%3ABk9SR_a4zsKTZA

  • @nzrestoration9486
    @nzrestoration9486 6 ปีที่แล้ว

    Another great video, good practical advice with humour, brilliant.

    • @BritannicaRestorations
      @BritannicaRestorations  6 ปีที่แล้ว

      Thanks!
      You have to laugh sometimes - must be some form of madness..
      Mike

  • @vincea1401
    @vincea1401 3 ปีที่แล้ว +1

    Hello Mike
    Like a dream comes thrue ?
    I think i ll try to find this gasket wich chiper than a new pump
    Thanks

  • @boelowildervanck2787
    @boelowildervanck2787 4 ปีที่แล้ว +1

    hi Mike, good tip! I also ordered this gasket at the same company, however, I haven't had a confirmation ta the order, they don't answer my mail and are offline with the chat...doesn't feel good. I think I'll have to work with RTV to seal the pump.

    • @BritannicaRestorations
      @BritannicaRestorations  4 ปีที่แล้ว +1

      Be careful as the gasket acts like a shim and if missing will make the pump tight!

    • @boelowildervanck2787
      @boelowildervanck2787 4 ปีที่แล้ว +1

      Britannica Restorations Ltd good one thanks!!

  • @defeyago
    @defeyago 4 ปีที่แล้ว +1

    Hi Mike! Do you have one of those gakets on hand? In case you do what's the thickness of it? Thanks! Abrazo

  • @vincea1401
    @vincea1401 ปีที่แล้ว +1

    Hello Mike, i tried to reseal my pump with like spécial anaeroby silicon, but when i closed thé pump, woth résonance torque, thé pump didn t turn anymore. So, what i believe is that thikness of thé seal is part of thé system, making enougth place for thé pièces inside to turn. I have so thé obligation to find thé seal. Can you give thé name of thé company who sell this seal please ?
    Rgds
    Vince

    • @BritannicaRestorations
      @BritannicaRestorations  ปีที่แล้ว +1

      www.ebay.com/itm/324441800766
      Same kit for the 300Tdi

    • @vincea1401
      @vincea1401 ปีที่แล้ว

      @@BritannicaRestorations ok, ty

  • @solantar6912
    @solantar6912 4 ปีที่แล้ว +1

    Hello , ive noticed that the shaft out of the power steering pump has come out about an inch after removing the drive belt does not look right and now wont go back in ,,, any help please thanks

    • @BritannicaRestorations
      @BritannicaRestorations  4 ปีที่แล้ว

      Sounds like you will need a new pump - cannot buy parts to fix them

  • @dariuszrad4559
    @dariuszrad4559 3 ปีที่แล้ว +1

    Mike ja wiem ze te film był nagrywany 2 lata temu ale proszę podaj numer tej uszczelki i tulejki. Czeska republika jest obok.pozdrawiam dobre filmy.

  • @mjallenuk
    @mjallenuk 6 ปีที่แล้ว

    Very interesting ... I always just replace them (courtesy of ACS Tamworth) and I've never taken the time to have a nosey in one. Cheers chap!

    • @BritannicaRestorations
      @BritannicaRestorations  6 ปีที่แล้ว

      The gasket was not the cheapest but it worked - worth having a go for £8!
      Mike

    • @mjallenuk
      @mjallenuk 6 ปีที่แล้ว

      Agreed. I have a spare knocking about I might just take the time on a damp day to have a poke inside!
      Interesting nugget regarding chucking the gaskets in a puddle. Working on an old narrow gauge I've seen the engineer do something similar with a bucket of grease and then dry steam.

    • @BritannicaRestorations
      @BritannicaRestorations  6 ปีที่แล้ว +1

      The old grease trick works well, as the oil in the grease gets absorbed so the gasket becomes softer and then take up any imperfections in the machining of the facesMike

  • @duggaz84
    @duggaz84 6 ปีที่แล้ว

    I replaced it with easygasket was a quick fix but worked

    • @BritannicaRestorations
      @BritannicaRestorations  6 ปีที่แล้ว

      I tried with some sort of quick gasket but when tightening the pump nipped up - seems the gasket is also a shim
      Still, if it worked!..
      Mike

  • @itolond
    @itolond ปีที่แล้ว +1

    TDI300, bubbles and noise from power steering and overflow from the reservoir (steering worked ok) - ended up replacing pump with L/R pump - seemed ok for a week then appears to be doing same , where to look for issue?

    • @BritannicaRestorations
      @BritannicaRestorations  ปีที่แล้ว

      You may be getting air sucked in the system - check all connections. One main issue is the O ring on early pump's intake side - the early pumps had a pipe and flange bolted to the pump and the seal was an O ring - they fail and draw air in - later designs did away with this

    • @itolond
      @itolond ปีที่แล้ว

      @@BritannicaRestorations thx, is it worth replacing the oring in all the connections, or best one by one

    • @BritannicaRestorations
      @BritannicaRestorations  ปีที่แล้ว

      Try replacing the O ring - there is no part number available as it is classed as a none serviceable item, but if you take it to a local hydraulic shop, they should match it up for you

    • @itolond
      @itolond ปีที่แล้ว

      @@BritannicaRestorations intake is the feed from the reservoir ?

    • @BritannicaRestorations
      @BritannicaRestorations  ปีที่แล้ว

      Yes - it is the metal pipe bolted to the bottom of the pump

  • @ianjenkins8726
    @ianjenkins8726 4 ปีที่แล้ว

    My 300tdi pump looked different. It has an impeller with with approx 12 free floating vanes and is sealed by an o ring, not a gasket

  • @charlesd177
    @charlesd177 6 ปีที่แล้ว

    Good day what was the thickness of that gasket?

    • @BritannicaRestorations
      @BritannicaRestorations  6 ปีที่แล้ว +1

      Do you know I didn't measure it - I will be ordering more in the future so I will let you know
      Mike

    • @charlesd177
      @charlesd177 6 ปีที่แล้ว

      Britannica Restorations Good day did you manage to measure it?

    • @BritannicaRestorations
      @BritannicaRestorations  6 ปีที่แล้ว +1

      I have not ordered any as yet as I have no pumps to service - the come from the Czech republic
      Mike

  • @solantar6912
    @solantar6912 4 ปีที่แล้ว

    sorry it is on my 97 300tdi defender