I did say many other youtubes not ALL youtubers, sorry for the confusion. It seams to me in order to get free samples you have to hide the bad points. I value credibility over handouts and by the sounds of it you do too so all good :) Love your vids by the way dude. At a side note, I wouldn't turn down freebees so long as I can be 100% honest, that's the deal I have with banggood :) I have many brands contact me most days offering me free stuff and when I tell them I'll only review if I can be 100% honest and show bad point too they go all quiet!
Weird. My outcast came built way different than this one. Metal everywhere and a lot different battery box. I love my outcast and thank you for reviewing the outcast. Love your channel brotha.
Hi Kevin. My name is Scott. 8m in Washington State. I am very impressed with your approach to helping everyone interested in RC goodies. It's great how you show the kits and show people how to work on your cars or whatever. I was looking at some different monster trucks and found a model that you might have a really good time checking out and to see if Stimpy can bust it!!!;) It's called the Carbon Asault. AMain Hobbies has the kit. Thank you for creating the videos you do. They are extremely good information and help people that are not very familiar or just need info on a model they are interested in. plus your videos are helping bring more and more people into the world of RC. I have been running aircraft boats and trucks,cars and so on for 40 years and it only gets better and better. I am curious about this m9nster truck. It looks to be a good quality but you never know. Thanks again Kevin for all 5he great videos!!!:)
@@Animetion293 I mean it makes sense with suspension arms, Everybody knows not to run aluminum arms cause they'll bend. I look at the chassis the same way. Still love my v3 kraton though. Every time my cousin and I go out the 2 trucks that ALWAYS come are the kraton and xmaxx..... But I can't wait to get a 4s outcast.. Sometimes I don't feel like lugging around my xmaxx for a bash session and a smaller truck would be nice, Seems to fit the bill.
sounds like it ticks all the boxes dude. i had it out the other day again, the delay in the controls is bad and makes it so unpredictable, everyone says its the radio so ill change it out.
@@KevinTalbotTV the STX2 controller sucks 😝. I just swapped in the old Tactic TTX300 👍 and recalibrated. These 4s rigs make a whizzing sound. Sometimes the slipper will slowly loosen up too. Running mine 1/2 turn out from tight 👍. Be careful if you get yours wet. The slipper and rear input bearings seize up easily 👀. Rubber sealed is the way. 🍻
If you are experiencing Delay issues turn on the radio hold down the set button on the ESC as soon as you see the ESC flash red press the set button and leave your controller at the neutral position and then do the same for full throttle and full break I have put a different receiver in there and you get better range love your videos keep it up m8
From the videos I've seen it appears that the 4S Outcast whellies much to easily for my driving skills. I'd prefer the 4S Kraton but would want a more substantial front bumper and the Outcast 4S tires on the Kraton
Threre is converters to convert the connecter you do not need to cut the cables. By the way your my favourite youtuber you taught me a lot about RC cars and I really appreciate what you do for your fans.
What is better Arrma outcast 4s or the Arrma outcast 6s because I have been to rc for 3 years now and I just want to know which one is better for me. Thanks 😊 🤘🤘
keV I have a brand new arrma krayton V3 and it's really cool, but can you tell me why the wheels wobble so much!?? Even when the front wheels pop up under acceleration I can see how unbalanced they are? Can you help me? I thought getting a hobby grade car "fairly expensive ones", everything would be perfect 🙄🤔😁
Been waiting for a while for this review. I bought the Kraton 4s, replaced servo and radio just after box was opened. Great review. I look forward to seeing what you get out of this truck.
If the 3s blx system is anything to go by, this will be an awsome basher. We have a senton and a big rock. Both break on a regular basis as does my kraton, but overall they are fairly strong. Give it some welly kev, if anyone can show the weak points you can!! Got agree, the tactic radio is much faster and better quality than the new spectrum it comes with now. Servo's are pants and parts availability is ok if you shop in America.... T-bone bumpers are a good investment, but again only from the U.S.A. and expensive for what you get. As you can see, I'm not an arrma fanboy just like the look of em in general. On the same score, my trx4 is good too but has its faults.... Looking forward to see you bash it to bits!! ATB Andy.
Nice u got the Outcast, I just got one last week too but the 6s version n so far im liking it, U have the Notorious so u already know how the 6s versions run
Another good review. About batteries with those type of plug you just need use a good adhesive velcro joint the batteries in position when the cables don't touch together and go for bashing.
Do a review on the 3s typhon!! I frigging love mine and I know you like it also. It may not be a big backflipper like you like though Haha awesome video as always bud
Kev like I said in your other video. New servo and hot racing servo saver kit. Turn off punch control and tighten the slipper a turn or two and it'll help the laziness. I love my 4s trucks though. And pick up a full set of spare arms, the arm quality seems a bit inconsistent as my outcast has been to skate parks and BMX tracks no issue but my 4s kraton broke an arm on the second run, I was jumping it hard but still broke with "less" abuse
Hi Kevin nice compact set up looks like a sturdy RC if you don't mind me asking what are the purple handled tools you use you look very handy and strong get into the tightest of gaps need to get me some. You have to do a RC Sundance to get rid of this weather ⛈ brilliant channel
I bought one 4 weeks ago. driven it 4 times. First time broke the right rear a arm. second run with replaced a arm, all good. the third run broke rear left a arm. replaced it. 4th run broke the chassis after landing on a corner of jump right in the middle of the chassis. It was my first arrma, and i'm honestly a bit disappointed. It is a fun truck, no daubt. But not as tough as i would like. I'm a pretty careful driver with my rc cars...
Kevin it is my first day owning an arma outcast and I've cracked the chassis and lost a lower front suspension pinion. Can you suggest hop up parts please bro
in my opinion, the EC% connectors are the best at staying together during hard landings. i dont go hard as bad as you, but i do push my cars. never had one come unplugged. i now change all my ESCs to the EC5s
I can’t wait to see you beat the hell out of that thing. I had the 6s versions , your right about the plastic chassis , my senton 3s has a plastic chassis and that car takes the most beating out of any of my cars. Plastic for the win
So which holds up better the outcast or the notorious. I’d like to have the notorious because bigger and 6s but the outcast isn’t slow by any means so which will hold up better in the long run?
Kev, please do a review on a redcat everest 10 and compare it to the 200 dollar crawler, and do a review on the redcat landslide and compare it to the outcast
i cant wait until you take this to the skate park. I am really curious about it's durability. Especially those drive shafts. If they hold up, it would be great because metal ones tend to bend. these will not.
Guys can you tell me how the parts add up so fast , everytime i want order parts fix few arrmas its more fun and cheaper to buy the newest arrma now i ordered infraction 😆 that being said i liked the seperate remote for each car and now with these junky rtr remotes kinda deterred now this be second rig i have buy another remote or keep swapping .which i end up with new parts cars 😆
HONESTY is the best policy Kevin..........SEND IT TO THE MOON, PLUTO, SUN AND THE STARS......CRASH IT, SMASH IT, FLATTEN IT, REBUILD IT..............BACK TO THE MOON, HAPPY FLIPPIN N FLYIN
I'm new so I'm not sure how this all works. The manual says if your gonna run 3s or 4s to jus use the loop on the esc. So would that eliminate the soldering?
Great unboxing vid Kev looks like a really fun truck looks to be really well made I may have to look into getting one. You should try a Redcat Landslide man I beat mine mercilessly and I haven't broke anything. I'll let me take that back the rear bumper got sheared off when I was bashing somewhere and disappeared. Not that I cared because I was planning on putting a wing mount on it anyways. All I did to it from the box was change the spur gear to steal and put 500k diff fluid in the center just like I would any center diff vehicle I'm not a fan of plastic Spurs.
The Arrma slider plastic driveshafts are a LOT better then the Traxxas ones. The only issue that happens sometimes is the axles come apart because they aren't tightened from the factory
Not everyone gets stuff free sent to them...i paid for mine...
Daang it's like nobody knows you commented on Kevs video. You should be known...
Good for you
@@bdp3502 just stating facts...
I did say many other youtubes not ALL youtubers, sorry for the confusion. It seams to me in order to get free samples you have to hide the bad points. I value credibility over handouts and by the sounds of it you do too so all good :) Love your vids by the way dude. At a side note, I wouldn't turn down freebees so long as I can be 100% honest, that's the deal I have with banggood :) I have many brands contact me most days offering me free stuff and when I tell them I'll only review if I can be 100% honest and show bad point too they go all quiet!
The traxxas 1/6E REVI VXL cost around 230 $ in traxxas store and they cant ship to my land. So in my land the rc car cost 400$
cannot speak for everyone but I personally respect your honesty
and the "delay" is the radio ... had the same with my v4 kraton
Weird. My outcast came built way different than this one. Metal everywhere and a lot different battery box. I love my outcast and thank you for reviewing the outcast. Love your channel brotha.
4s and 6s are completely different
You probably got the 6s
Hi kevin
The outcast is beautiful truck as well keep up the good work Kev
Happy late fathers day to all the dads out there driving radio controlled cars with there kids
Jordan 420 thanks
@@donnamoller1875 for sure man it was mu boys first birthday 2 days after what a great time
I like the fact that you're brutally honest, IDK about anyone else but that's what I want to hear
9:24 only kev would solder directly over a lipo lol
lol
Lol
He is a professional
😂😂
Hi Kevin. My name is Scott. 8m in Washington State. I am very impressed with your approach to helping everyone interested in RC goodies. It's great how you show the kits and show people how to work on your cars or whatever. I was looking at some different monster trucks and found a model that you might have a really good time checking out and to see if Stimpy can bust it!!!;) It's called the Carbon Asault. AMain Hobbies has the kit. Thank you for creating the videos you do. They are extremely good information and help people that are not very familiar or just need info on a model they are interested in. plus your videos are helping bring more and more people into the world of RC. I have been running aircraft boats and trucks,cars and so on for 40 years and it only gets better and better.
I am curious about this m9nster truck. It looks to be a good quality but you never know. Thanks again Kevin for all 5he great videos!!!:)
"Kev's honest rc reviews"
Least you won't be bending chassis now! I honestly think the plastic chassis are more durable than the aluminum.
I think so too, man.
@@Animetion293 I mean it makes sense with suspension arms, Everybody knows not to run aluminum arms cause they'll bend. I look at the chassis the same way. Still love my v3 kraton though. Every time my cousin and I go out the 2 trucks that ALWAYS come are the kraton and xmaxx..... But I can't wait to get a 4s outcast.. Sometimes I don't feel like lugging around my xmaxx for a bash session and a smaller truck would be nice, Seems to fit the bill.
metal chassis can be ok if designed right and they use the correct material but I agree, 99% of the time plastic is better for bashing
Great rundown and BADASS truck Kevin 👊!!!! My Kraton 4s has been a Blast 😍. Fast, easy to wrench on, and takes a flogging 👀😎💪👊👊
sounds like it ticks all the boxes dude. i had it out the other day again, the delay in the controls is bad and makes it so unpredictable, everyone says its the radio so ill change it out.
@@KevinTalbotTV the STX2 controller sucks 😝. I just swapped in the old Tactic TTX300 👍 and recalibrated. These 4s rigs make a whizzing sound. Sometimes the slipper will slowly loosen up too. Running mine 1/2 turn out from tight 👍. Be careful if you get yours wet. The slipper and rear input bearings seize up easily 👀. Rubber sealed is the way. 🍻
@@KevinTalbotTV what do you think of the plastic discs in that outcast kind of makes me iffy on buying one
This is why i love your channel honest on everything!! Keep it up
Professionaly unboxed great Kev 👍🏼 rare body as well
If you are experiencing Delay issues turn on the radio hold down the set button on the ESC as soon as you see the ESC flash red press the set button and leave your controller at the neutral position and then do the same for full throttle and full break I have put a different receiver in there and you get better range love your videos keep it up m8
From the videos I've seen it appears that the 4S Outcast whellies much to easily for my driving skills. I'd prefer the 4S Kraton but would want a more substantial front bumper and the Outcast 4S tires on the Kraton
yeh, i think this one is more for stunts
Omg!!!! This RCC is awesome 😎
Very good review like always! I like the smooth sound it makes and for sure the look is unique in a way! Can't wait to see it in action.
nearly 1000 subs for you!
@@KevinTalbotTVYEEESSS ! Very close!
I have this and it is awesome
Where do you get a vw beetle show from is it from eBay because I have no idea
Threre is converters to convert the connecter you do not need to cut the cables. By the way your my favourite youtuber you taught me a lot about RC cars and I really appreciate what you do for your fans.
Great honest review Kev! 4s power is awesome! Body looks great! 👍🍻
Dear arrma fan boyz! Please Don’t get mad at an honest review?
What is better Arrma outcast 4s or the Arrma outcast 6s because I have been to rc for 3 years now and I just want to know which one is better for me. Thanks 😊 🤘🤘
Were the Yamaha piano that you got a while ago
Honestly Kev... cant take you anywhere. love the content.
4:07 kev why do you have beyblades on the shelf?
Congrats kev for 300k subs let's get you to 1 million subs
keV I have a brand new arrma krayton V3 and it's really cool, but can you tell me why the wheels wobble so much!?? Even when the front wheels pop up under acceleration I can see how unbalanced they are? Can you help me? I thought getting a hobby grade car "fairly expensive ones", everything would be perfect 🙄🤔😁
Been waiting for a while for this review. I bought the Kraton 4s, replaced servo and radio just after box was opened. Great review. I look forward to seeing what you get out of this truck.
Any battery will puff up. I had it happen to me and I found out I wasn't running the proper C rating. Love the video. Have a good one Kev.
If the 3s blx system is anything to go by, this will be an awsome basher. We have a senton and a big rock. Both break on a regular basis as does my kraton, but overall they are fairly strong. Give it some welly kev, if anyone can show the weak points you can!!
Got agree, the tactic radio is much faster and better quality than the new spectrum it comes with now. Servo's are pants and parts availability is ok if you shop in America.... T-bone bumpers are a good investment, but again only from the U.S.A. and expensive for what you get. As you can see, I'm not an arrma fanboy just like the look of em in general. On the same score, my trx4 is good too but has its faults....
Looking forward to see you bash it to bits!!
ATB
Andy.
Nice u got the Outcast, I just got one last week too but the 6s version n so far im liking it, U have the Notorious so u already know how the 6s versions run
Theres a cable holder clip for ur balance lead wires, its right on the spur gear cover
Also change that crappy radio out, they say it has a delay when u put the power down
i had my gens ace batteries since october 2014 and they still work perferctly
You, Rich Duperbash, and Aussie Rc Playground are the best and most honest reviewers. Great video!
Hey Kev where did you get that blue plastic ramp?
Can u get and do a video with the Arrma Limitless Roller i want to see what crazy stuff u will put in it :D
Awesome video Kev!!!
Another good review. About batteries with those type of plug you just need use a good adhesive velcro joint the batteries in position when the cables don't touch together and go for bashing.
Hey kev would you recommend the outcast 4s or the erevo 2.0 for hard bashing
Outcast 4S. Both need upgrades but cost less for the upgrades on the 4S Arrmas
can you make another video about the 12428 wltoys. that would be nice to see
Hey Kev
One question.
Could you make a video with the team magic e5 to show the people this monster. I got one with a 4S system.
Great honest review Kev! Keep up the great work. Look forward to the Arrma Infraction!👍
How does the short wheel base compare to the E-revo2 is this more fun ???
When the senton 3s blx ???
A concurrent for the slash 4x4
hey Kev what happened to that arm talion you ordered a while back
It was the kraton
Do a review on the 3s typhon!! I frigging love mine and I know you like it also. It may not be a big backflipper like you like though Haha awesome video as always bud
Kev Talbot, the only man in history to go from driving a Rover 25 to a Lamborghini Huracan 🤣
This is gonna be fun to play with Christmas 2021
Kev like I said in your other video. New servo and hot racing servo saver kit. Turn off punch control and tighten the slipper a turn or two and it'll help the laziness.
I love my 4s trucks though.
And pick up a full set of spare arms, the arm quality seems a bit inconsistent as my outcast has been to skate parks and BMX tracks no issue but my 4s kraton broke an arm on the second run, I was jumping it hard but still broke with "less" abuse
Kevin I am a beginner would u recommend the arrma granite 4x4 blx or the outcast 4s
Hi Kevin nice compact set up looks like a sturdy RC if you don't mind me asking what are the purple handled tools you use you look very handy and strong get into the tightest of gaps need to get me some. You have to do a RC Sundance to get rid of this weather ⛈ brilliant channel
Cant wait for the bash
Keep up the great vids, i watch em all and the live streams! Cheers Kev!
I really don't want to solder a wire for my first rc any other options? I know my comment is late
Can you flip the batteries so the cables exit through the center of the car not the outside.
love the videos kev! Keep it up
I bought one 4 weeks ago. driven it 4 times. First time broke the right rear a arm. second run with replaced a arm, all good. the third run broke rear left a arm. replaced it. 4th run broke the chassis after landing on a corner of jump right in the middle of the chassis. It was my first arrma, and i'm honestly a bit disappointed. It is a fun truck, no daubt. But not as tough as i would like. I'm a pretty careful driver with my rc cars...
Kevin it is my first day owning an arma outcast and I've cracked the chassis and lost a lower front suspension pinion. Can you suggest hop up parts please bro
Hey, what is an expensive rc stunt truck Kev? I would have thought $1050NZD was a fair bit lol but then the 1/8 notorious is 1100 here too
in my opinion, the EC% connectors are the best at staying together during hard landings. i dont go hard as bad as you, but i do push my cars. never had one come unplugged. i now change all my ESCs to the EC5s
I CANT BELIEVE YOU ORDERED THE INFRACTION DUDE I CANT WAIT
yeh man should be a bit of fun :)
Kevin Talbot make the infraction double motor
Also on the 4s for the battery’s what if you just out the battery’s on top of next to each other but have both battery’s facing opposite sides
Kevin hows the monster truck coming along. Looking forward to see you driving a real monster truck.
can you do a video where you test the mini max and the Arrma Outcast 4s and pick wich ones better?pls
OMG, can't wait for you to get the Arrma Infraction.. That's my next RC when they're available😁
I can’t wait to see you beat the hell out of that thing. I had the 6s versions , your right about the plastic chassis , my senton 3s has a plastic chassis and that car takes the most beating out of any of my cars. Plastic for the win
what charger do you use with the lipo batteries in the link you provided ??
I've been waiting for this to happen! It has always been in the back round in your live streams.
I have a request, can you try fit the outcast 4s body to slash, and show how it will looks like? I'll try it on my rig, but i'm not sure it will fit.
Kevin Talbot, have you had any problems with reversing? I just picked up a Kraton 4s and it doesn’t reverse.
They should of stuck with the tactic TX300 radio, the TX300 come with my typhon 3s, its a really good radio.
yes 100%
So which holds up better the outcast or the notorious. I’d like to have the notorious because bigger and 6s but the outcast isn’t slow by any means so which will hold up better in the long run?
can you do a little update on the monster truck?
Well we appreciate you and your honesty, Kevin..👍🏿
Could you Connect that tactic Radio to the 4s outcast?
I’m new to the RC world just bought my out cast 4s can you help me out on how to bind the receiver to the remote
Great videos... Definitely liking in that Arrma Outcast 4s.
Make sure to have a in near for all the parts
Great show Kev👍. What is the song playing in the video?
Kev, please do a review on a redcat everest 10 and compare it to the 200 dollar crawler, and do a review on the redcat landslide and compare it to the outcast
What I like about your reviews is that you don't hold back. You bash them to their limits. That way we know what were getting.
i cant wait until you take this to the skate park. I am really curious about it's durability. Especially those drive shafts. If they hold up, it would be great because metal ones tend to bend. these will not.
My rear differential yoke has melted 2 times causing failure in my stock Outcast 4S within a month. I'm in the process of returning the truck.
The video really gives that justice it looks sick
Guys can you tell me how the parts add up so fast , everytime i want order parts fix few arrmas its more fun and cheaper to buy the newest arrma now i ordered infraction 😆 that being said i liked the seperate remote for each car and now with these junky rtr remotes kinda deterred now this be second rig i have buy another remote or keep swapping .which i end up with new parts cars 😆
Hi can you review the 1/16 e revo because im planning to buy it. I dont like the 1/10 e revo because i cant put it on my backpack so i sold it. Thanks
Granite with a chassis brace and wing
And body clips
Hey Kev, your problem with the slow acceleration could be a bit of throttle dual rate misadjustment.
Really does kev looks tough thinking that too compared to Granite
HONESTY is the best policy Kevin..........SEND IT TO THE MOON, PLUTO, SUN AND THE STARS......CRASH IT, SMASH IT, FLATTEN IT, REBUILD IT..............BACK TO THE MOON, HAPPY FLIPPIN N FLYIN
I'm new so I'm not sure how this all works.
The manual says if your gonna run 3s or 4s to jus use the loop on the esc. So would that eliminate the soldering?
Are you going to do any mods on it or vent the tires or anything? Im super jealous i want a 3s or 4s arrma rig to try out.i love my 6s kraton
probs servo and radio
Great unboxing vid Kev looks like a really fun truck looks to be really well made I may have to look into getting one. You should try a Redcat Landslide man I beat mine mercilessly and I haven't broke anything. I'll let me take that back the rear bumper got sheared off when I was bashing somewhere and disappeared. Not that I cared because I was planning on putting a wing mount on it anyways. All I did to it from the box was change the spur gear to steal and put 500k diff fluid in the center just like I would any center diff vehicle I'm not a fan of plastic Spurs.
Awesome video,cool truck.
Does the outcast body fit on the notorious
Latrax prerunner please, I want to see you put brushless and lipos in there
The Arrma slider plastic driveshafts are a LOT better then the Traxxas ones. The only issue that happens sometimes is the axles come apart because they aren't tightened from the factory
Love your videos. Got the felony 6s and love it!!!! It’s wild! Started with the hoss vxl 4x4 and have upgraded everything.
Thanks to your videos.
When's the infraction coming?
Your e revo 2.0 diff broke beacause you use the self righting and when you do the 2 whell thing i think
I think as a guess kev that out cast will do 52.7mph