Get 12% off the equipment below using code: sam12 Sonic Mega 8K S: phrozen3d.net/xWsgJ Wash Mega S: phrozen3d.net/a8TaY Cure Mega S: phrozen3d.net/CDJbO Aqua Gray 8k: phrozen3d.net/SjVbd
Is there a smaller printer you would recommend? I looked at the old video of when you first started to print the death korps, and the 3d printer you recommend in that video is now out of stock if you could recommend one that will be great if not then oh well
Maybe you could help me trouble shoot something. I had a failed print in my Sonic mighty 8k and it has been making noises at the start of the print on every print after it. Also, the early layers are all bunched up now. Do I need to replace my Z axis motor?
Right? I just imagine having a whole army of Blood Knights/Grave Gaurd from the older VC lists. Last I looked they were like 120 for 5 knights. FIVE! And you could not even make them all knights, it was 4 and 1 champion.
@@ClemiHW I am assuming the increase is from them shifting it to "finecast" aka, failcast (hey, I learned that term from one of their employees). Which is even more absurd because it does not cost that much to make 1 unit. I could understand if they redesigned the knights like they did the coach, but at the time they were the same model, just produced differently.
@@RoseKindred In France back in June they increased the price to 6% more, if that's because they're shifting to finecast then that's a huge loss I think most people are now switching to proxies and just use official merch for tournaments
I mean it took a lot of glue to assemble 3D-printed BFG9000 (yes I remember hearing that ID Software did in fact make a life sized copy of BFG9000 on a 3d printer), so I bet life sized Kriegsman would take a lot of effort to assemble and probably some steel rods as base.
Don't know about your idea with those little ones, but you could made a tremendously epic diorama, with 1 or 2 titans and hundreds of death soldiers by their feets
I would be afraid of overloading a plate that size. Just surprising how much can fit, but one shift or wobble... or cat, and so much wasted time/resin. At least the bad prints do make good scatter terrain when cleaned.
Even the very first 3d printers could print faster than 80% of painters can even paint. These new huge ones for personal use you would easily print way more than you could ever paint.
If you’ve got some 3D modeling skills you could make use of the vertical build volume and stack the miniatures on towers, you could probably print close to 500 or more in 1 print provided that you had enough resin.
These are Valor Korps and are IP neutral. The issue with Krieg is they are pretty much exact copies of historical WW1 uniforms. Only the helmet badge is GW IP.
Did you consider aligning the torso and arms before printing, and printing each model whole? You could have done 10-20 different poses and that might have saved you all the hassle of gluing.
It's amazing that, whether you go for a bottom-of-the-barrel 3d printer, or a top-of-the-line 8K XL printer, it's still far cheaper than buying the models from GW or Forge. It's just becomes a decision of how much money do you want to save.
Brother, I think you just sold me on joining your Patreon. I owe you anyway - your advice this last year has saved me tons. And my Grey Knights thank you for it.
I think you should print the basis for every Tau horde army! 1830pts of 60 Kroot Carnivores, 30 Kroot Farstalkers, 60 Breachers, 60 Strikers, 30 Pathfinders. 3 Recon Drones, 30 Gun Drones, 12 Support Turrets, and then add Shadowrun and a rando character.
Here is a big test for you… in keeping with the Krieg theme. The Gnom medium artillery carriage. It’s on myminifactory the creator is Nate Feyma. The tractor in the front is the size of Super heavy Baneblade as is the tractor at the back. The gun is massive. The model takes 6 to 8 litres. I am in no way connected to the creators page I just found it and thought it was absolutely brilliant. Great channel by the way👏🏻
For combatting the colder temperatures you mentioned, YMMV but I wouldn't recommend upping your exposure times across the board; I just increased the times on my initial burn-in layers (and upped the burn-inlayer count to 10, with 25 transitional layers). Thataway the machine and resin get headed up, but only the rafts are affected. I'd be too scared of affecting the quality of the miniatures if I messed with the print settings that actually affect them. I also have my printer in its own closed cabinet, that retains heat fairly well. Not sure if this affects anything all that much, but I also have an FDM printer at the base of the cabinet which I run a short job on first before any resin print, hoping it'll heat the space above a smidge. Perhaps it's just superstition! But I get it to print 10 small bases or something like that.
Hey! Is there any reason you prefer Chitubox over Lychee? I find the former really janky and full of odd little glitches. Plus Lychee's new auto-support features seem to work so well (though you do need to give models a manual check at the end). My current workflow is; manually orient the model, use "magic" auto-supports, then use the "generate supports only on islands" feature (detailed island scan), manually add/alter any supports and then use the magic "Optimize" function. It's yet to cause me any major failures, though I did have an incident with a couple of halberds where I hadn't properly checked the bottoms of the blades.
Worst part of chitubox I'm finding is the camera movement rotating around objects in the scene. It doesn't rotate around what you've got selected and makes traversing it absolute hell...
Some slicers let you fuse model parts within the program itself before printing. Doing that could have saved you a good chunk of time gluing the parts together after printing.
Saves time building but opens up a whole new issue with orientation and snapping those thin gun barrels. For space marine models, definitely, for thinner figures better to stay safe and keep seperate
Me, just scrolling: oh cool 1000 points of kreig isnt bad, I wonder- Batte Brother Sam: I'm printing 1000 kreig models. A whole company per plate. me: 0-0 oh...
That's my patreon sub model over there on the far left. My hat's on crooked. Thanks, from one Sam to another. Also, recommended challenge: chaos kitbash. Choose two armies and Frankenstein enough models together to make a 500 point army. Adeptus Tau, Death Death Guard of Krieg, etc etc etc. It would be an experiment with creativity and using/printing alterations.
Next challenge: Imperator class titan....I know of like maybe 2 files that exist but they are pretty easy to find. However a Astraeus Super-heavy Tank may be a nice print.
2 mins 7 seconds in and I needed to stop, I could hear Slaanesh whispering to me, tell me that I should be nothing but jealous of you and Khorne telling it could be mine only if I put one skull at the foot of his throne. Back down to my basement, I will throw out all of my childrens toys and my wife's stuff, I have no clue what any of it is and or does besides not help me print models. It starts now, for the Emperor!!!!
Surely, you have meant 1000 WarMänner figurines that you only intend to use algonside your other figurines from ConflictPolearm -40000k game, set in a colorful bright future.
New to resin 3D printing, question might sound stupid; but wouldn't this print at a lower quality than a 8K mini due to the pixel density? If it's double the buildplate and prob lcd screen size at the same 8k resolution wouldn't this be more similar to printing in 4K on a mini?
I would use it to print giant parts. I can see this as a way to mass produce, so now 3d Printers can make a lot more. Do you notice a quality loss at higher speeds?
Try to come up with a print that uses the entire Z axis to print regular soldiers. You can do this using tiered support layers but its very tricky! You could potentially do 1,000 kriegsmen in a single print.
Hello, I'm new to this, important question, why not assemble the miniature in the 3D program and then print the complete figure? Or is there something I don't know about printing them in parts? I'm obviously talking about small miniatures like space marines. Greetings from the Dominican Republic
maybe for your next challenge should be an ork gargant to go againts the warlord titan, not only would it be a great test for the printers but they would look amazing together on a shelf.
New challenge? Life-sized dinosaur. Not the big ones, but a chicken-sized one. I think there are some nice STLs out there that are like that. The dinosaur could double as a unit for an exodite army.
The mighty 8k can squeeze 97 kreig of the same files you're using =) I thinned mine down to 90 to keep the numbers square. Printed at 28um layers only took 5 and a half hours too. Your videos don't half give me inspiration to see just how much I can get on my plate and get printing 😅, my elegoo mars 3 can manage 200(ish) backpacks on 1 plate and only takes 7 hours so I'll be slowly building a full battle company over the course of a week
So basically, I would be able to print whole EPIC army per plate. Not to mention whole Battlefleet Gothic fleet per plate :D Do want. But printer itself is bit expensive for me :D
Nah, it's cool. Most STL creators offer their STLs for free when they're just copies of GW's stuff, so even if GW gets them banned off of Cults or Thingiverse, they lose nothing by just putting their models up on pirate sites, or websites based in countries that don't have strict copyright laws. All GW'll accomplish by going after them is just pissing them off.
![ทุกครั้งที่หลับตา (Lucid Dream) - AYLA's [ Official MV ]](http://i.ytimg.com/vi/4i1OBAQyv58/mqdefault.jpg)
Get 12% off the equipment below using code: sam12
Sonic Mega 8K S: phrozen3d.net/xWsgJ
Wash Mega S: phrozen3d.net/a8TaY
Cure Mega S: phrozen3d.net/CDJbO
Aqua Gray 8k: phrozen3d.net/SjVbd
Is there a smaller printer you would recommend? I looked at the old video of when you first started to print the death korps, and the 3d printer you recommend in that video is now out of stock if you could recommend one that will be great if not then oh well
Maybe you could help me trouble shoot something. I had a failed print in my Sonic mighty 8k and it has been making noises at the start of the print on every print after it. Also, the early layers are all bunched up now. Do I need to replace my Z axis motor?
1000 Kriegsman? Oh, so the first attack wave.
Of thirty.
That day.
@@Bluecho4 During lunch
In the second sector
@@dantegaelach736of vraks alone
without artillery support
Literally printing a new company per plate, glorious.
Right? I just imagine having a whole army of Blood Knights/Grave Gaurd from the older VC lists. Last I looked they were like 120 for 5 knights. FIVE! And you could not even make them all knights, it was 4 and 1 champion.
It's very appropriate, since Krieg are effectively mass produced soldiers. Even employing proscribed technology like Vita-Wombs (allegedly).
@@RoseKindred insane to believe back then plastic soldiers were made out of plastic because it was cheap
@@ClemiHW I am assuming the increase is from them shifting it to "finecast" aka, failcast (hey, I learned that term from one of their employees).
Which is even more absurd because it does not cost that much to make 1 unit. I could understand if they redesigned the knights like they did the coach, but at the time they were the same model, just produced differently.
@@RoseKindred In France back in June they increased the price to 6% more, if that's because they're shifting to finecast then that's a huge loss
I think most people are now switching to proxies and just use official merch for tournaments
Next challenge should be printing an entire space marine chapter
Helmets only
Or chaos war band
Next challenge is to make a video without using the word sonic or 8k
why
What about a full space marine legion
In before GW has a panic attack and sends out its team of lawyers.
Your mission, should you choose to accept it:
Print out a life sized Kreigsman.
I mean it took a lot of glue to assemble 3D-printed BFG9000 (yes I remember hearing that ID Software did in fact make a life sized copy of BFG9000 on a 3d printer), so I bet life sized Kriegsman would take a lot of effort to assemble and probably some steel rods as base.
yeah it would be easier to just make it out of other materials
Don't know about your idea with those little ones, but you could made a tremendously epic diorama, with 1 or 2 titans and hundreds of death soldiers by their feets
Seeing that many miniatures all lined up like that on a print bed kinda reminds me of Emperor Qinshihuang's Mausoleum with the clay soldiers
I would be afraid of overloading a plate that size. Just surprising how much can fit, but one shift or wobble... or cat, and so much wasted time/resin. At least the bad prints do make good scatter terrain when cleaned.
Modern printers are strong, pack your plate until you can't see the bottom of your build plate. You will maximize your use of resin
Be interesting to see a cost breakdown of 3d printing vs paying games workshops hyper inflated prices.
Even the very first 3d printers could print faster than 80% of painters can even paint. These new huge ones for personal use you would easily print way more than you could ever paint.
My man made a entire army on his own to fight the heretic with the machine that the good emperor made using his bare hands
If you’ve got some 3D modeling skills you could make use of the vertical build volume and stack the miniatures on towers, you could probably print close to 500 or more in 1 print provided that you had enough resin.
i dare to say that is not really worth it considering the resin use..
@@austersimon agreed 👍🏻
Can't wait for these files to be DMCA'ed by Games Workshop due to your video again!
Grab em while you can so the creator has a bit of cash to tide them over after having their livelyhood destroyed
"For every one of us who falls...TEN MORE WILL TAKE HIS PLACE!"
These are Valor Korps and are IP neutral. The issue with Krieg is they are pretty much exact copies of historical WW1 uniforms. Only the helmet badge is GW IP.
Did you consider aligning the torso and arms before printing, and printing each model whole? You could have done 10-20 different poses and that might have saved you all the hassle of gluing.
Noooo!!!!! You can’t do that! That’s $7000 for less than a pound of plastic! Nooooooo!
New challenge: Print the full contents and expansions (and terrain!) of the new Epic, better than the box. And paint them. In a week.
GW's CEO is throwing punches in the air right now.
It's amazing that, whether you go for a bottom-of-the-barrel 3d printer, or a top-of-the-line 8K XL printer, it's still far cheaper than buying the models from GW or Forge. It's just becomes a decision of how much money do you want to save.
Brother, I think you just sold me on joining your Patreon. I owe you anyway - your advice this last year has saved me tons. And my Grey Knights thank you for it.
Battle Brother Snitch
I think you should print the basis for every Tau horde army! 1830pts of 60 Kroot Carnivores, 30 Kroot Farstalkers, 60 Breachers, 60 Strikers, 30 Pathfinders. 3 Recon Drones, 30 Gun Drones, 12 Support Turrets, and then add Shadowrun and a rando character.
Here is a big test for you… in keeping with the Krieg theme. The Gnom medium artillery carriage.
It’s on myminifactory the creator is Nate Feyma. The tractor in the front is the size of Super heavy Baneblade as is the tractor at the back. The gun is massive. The model takes 6 to 8 litres. I am in no way connected to the creators page I just found it and thought it was absolutely brilliant.
Great channel by the way👏🏻
For combatting the colder temperatures you mentioned, YMMV but I wouldn't recommend upping your exposure times across the board; I just increased the times on my initial burn-in layers (and upped the burn-inlayer count to 10, with 25 transitional layers). Thataway the machine and resin get headed up, but only the rafts are affected. I'd be too scared of affecting the quality of the miniatures if I messed with the print settings that actually affect them.
I also have my printer in its own closed cabinet, that retains heat fairly well.
Not sure if this affects anything all that much, but I also have an FDM printer at the base of the cabinet which I run a short job on first before any resin print, hoping it'll heat the space above a smidge. Perhaps it's just superstition! But I get it to print 10 small bases or something like that.
I need to start a youtube channel just for all the free printers you guys get...
would it be difficult to make it a snapfit so it would be easier to asamble to the bases or arms?
Hey! Is there any reason you prefer Chitubox over Lychee? I find the former really janky and full of odd little glitches. Plus Lychee's new auto-support features seem to work so well (though you do need to give models a manual check at the end).
My current workflow is; manually orient the model, use "magic" auto-supports, then use the "generate supports only on islands" feature (detailed island scan), manually add/alter any supports and then use the magic "Optimize" function. It's yet to cause me any major failures, though I did have an incident with a couple of halberds where I hadn't properly checked the bottoms of the blades.
Worst part of chitubox I'm finding is the camera movement rotating around objects in the scene. It doesn't rotate around what you've got selected and makes traversing it absolute hell...
Some slicers let you fuse model parts within the program itself before printing. Doing that could have saved you a good chunk of time gluing the parts together after printing.
Saves time building but opens up a whole new issue with orientation and snapping those thin gun barrels. For space marine models, definitely, for thinner figures better to stay safe and keep seperate
@glitchedprints9128 blend resin and they won't snap, are bendable etc
I'm penut butter and jealous.... this is Epic AF!
Haha thanks brother!
Surely there will be an Imperator Titan print oneday. Even if it is just in 8mm scale for Legions Imperialis.
6.5 hours for 1 plate of +-40mm minis ? I dont know your settings but they are very slow, mine will take 3 hours maximum for such plate.
Oh so these are those infamous Vitawombs!
Me, just scrolling: oh cool 1000 points of kreig isnt bad, I wonder-
Batte Brother Sam: I'm printing 1000 kreig models. A whole company per plate.
me: 0-0 oh...
That's my patreon sub model over there on the far left. My hat's on crooked. Thanks, from one Sam to another.
Also, recommended challenge: chaos kitbash. Choose two armies and Frankenstein enough models together to make a 500 point army. Adeptus Tau, Death Death Guard of Krieg, etc etc etc. It would be an experiment with creativity and using/printing alterations.
With all the new hype for the Legions Imperialis game for GW I’d vote to print an entire army in a bottle and compare it against the new plastic kits
What is the delicious purple liquid in the wash station ?
What Kreig models are those? I'm just curious as I want to print those ones as well
Next challenge: Imperator class titan....I know of like maybe 2 files that exist but they are pretty easy to find. However a Astraeus Super-heavy Tank may be a nice print.
2 mins 7 seconds in and I needed to stop, I could hear Slaanesh whispering to me, tell me that I should be nothing but jealous of you and Khorne telling it could be mine only if I put one skull at the foot of his throne.
Back down to my basement, I will throw out all of my childrens toys and my wife's stuff, I have no clue what any of it is and or does besides not help me print models. It starts now, for the Emperor!!!!
Surely, you have meant 1000 WarMänner figurines that you only intend to use algonside your other figurines from ConflictPolearm -40000k game, set in a colorful bright future.
Alright. Now paint them......lolol. JK man. This is awesome. Ive been looking into upgrading printers to an 8k.
How to get a cease and desist from GW speedrun any % 😂
New to resin 3D printing, question might sound stupid; but wouldn't this print at a lower quality than a 8K mini due to the pixel density? If it's double the buildplate and prob lcd screen size at the same 8k resolution wouldn't this be more similar to printing in 4K on a mini?
Yes
GW need to get a grip and drop prices to be anyway competitive
I would use it to print giant parts. I can see this as a way to mass produce, so now 3d Printers can make a lot more. Do you notice a quality loss at higher speeds?
Try to come up with a print that uses the entire Z axis to print regular soldiers. You can do this using tiered support layers but its very tricky! You could potentially do 1,000 kriegsmen in a single print.
Mighty 8k may be cool but still rocking the OG Mars 3 pro USB is what it’s all about
You sir are a wild man! I love it!
Wouldn’t this actually have a worse resolution since the screen is far bigger than the mini but both are 8k?
Dude at 8:09 is that a layered visual effect or is that super glue vapor.
*heavy gasmask breathing*
Hello, I'm new to this, important question, why not assemble the miniature in the 3D program and then print the complete figure? Or is there something I don't know about printing them in parts? I'm obviously talking about small miniatures like space marines.
Greetings from the Dominican Republic
Your next challenge should be a Necron tombworld that your Krieg army can fight (alongside your titans)
Sooooo this is where you team up with Eric’s Hobby Workshop for an epic collab with this… right? 👀
That’s insane did you end up painting them all ?
If temperatures are critical for good prints, shouldnt they put a heater in there somewhere? I know very little about resin printing
Oh you're using the Valour Korps Kriegsman! thats so nice i just bought them lets see how they turn out!!
So now that you can print a company at a time, how much are you charging for a plate?
Yes, yes. Make more, even more, and then a bunch MOAR!!!
I want to see you print a to scale ship for an army to come out of/be stored in
Just curious what slicer your using for this printer
Creo que es chitubox
What file did u use? I’ve Downloaded many great Krieg files, but never found any with that German spike on the helmet. Great video btw
it's the valour korp from The Makers Cult
They're by far the best and most modular Krieg models on the market. Best presupports ever.
Get em while you can because Sam has essentially greenlit exterminatus on these models
maybe for your next challenge should be an ork gargant to go againts the warlord titan, not only would it be a great test for the printers but they would look amazing together on a shelf.
Print the entire Legions Imperialis starter box set, or a Titan in full?
How did you manage to print bases so nicely? Mine come warped or with weird artefacts in first layers. No other prints have this problem
Sam's building his own Warhammer World, innit he? Crack on!
New challenge?
Life-sized dinosaur.
Not the big ones, but a chicken-sized one. I think there are some nice STLs out there that are like that.
The dinosaur could double as a unit for an exodite army.
Or maybe a Guard Armored Regiment ...tanks tanks everywhere
What website do you get your files from?
If i had a 3D printer id do something like that
I respect the grind sam
i'm having so much trouble with my printer. sometimes the models arent even there and i have half a completed build plate! frustrating
Ah, the touch of death strikes again
that build plate is massive
The mighty 8k can squeeze 97 kreig of the same files you're using =) I thinned mine down to 90 to keep the numbers square. Printed at 28um layers only took 5 and a half hours too.
Your videos don't half give me inspiration to see just how much I can get on my plate and get printing 😅, my elegoo mars 3 can manage 200(ish) backpacks on 1 plate and only takes 7 hours so I'll be slowly building a full battle company over the course of a week
I am way mental than you I have printed 4500 kriegs :D I love to see you did it. epic video
wtf you mad lad!!!! well done!! LOL
How much did it cost in resin?
You re going to paint them all?
Where can i get the STLs. Sorry if i missed it in the video
So basically, I would be able to print whole EPIC army per plate. Not to mention whole Battlefleet Gothic fleet per plate :D Do want. But printer itself is bit expensive for me :D
Madness!
Now print how many Baneblades super tanks on one plate!
ok but now you have to paint 1000 minis xD
What an insanity, truly bonkers project!
I think why not print 15 milion of krieg 😂
Do you plan on making a video for Legions Imperialis?
What kind of lights are those at 7:16?
What's the purple stuff you're using?
Ah, a full sized Regiment
LEGIONS IMPERIALIS! Good sir
who gone paint this horde?
XD
The real challenge is to paint them all!
... UCV the brick all possible variants from this first entry to the Universal Carrier Vessel line.
How do you know it's a high-end printer? It has a hinged door.
Okay, now print the Emp. Titan in 1:1
where'd you get the 3D models?
This must be the vetay woom technology used by kreig
Here's a challenge for you: try not to get more STL creators into the GW crosshairs.
Nah, it's cool. Most STL creators offer their STLs for free when they're just copies of GW's stuff, so even if GW gets them banned off of Cults or Thingiverse, they lose nothing by just putting their models up on pirate sites, or websites based in countries that don't have strict copyright laws. All GW'll accomplish by going after them is just pissing them off.
This is basically canon
hell yeah!
*Happy Gas Mask Noises*
1,000 models. That’s a lot of dudes.
So...much...glue... lol
Krieg. You hear them before you see them.
will ye ever print heresy brother?
eventually, It's something I want to do
Have you tried the Uniformation GKtwo?