Yeah, I’ve been hearing in the news here in the United States about the problems with Canada Post, too. Hopefully you’ll get the rest of your parts soon! As for what you’ve done so far: It looks like you got things under control! It’s starting to look a little bjt like my Firefly FFTL, if you remember seeing it in my videos! 😂 What you’ve done to that neck makes it look a little like a relic! Regarding the idea of a forearm cut: I have had Telecaster-type guitars with and without comfort cuts, and I find I greatly prefer them WITH comfort cuts, which is another reason I love my Firefly FFTL. I absolutely LOVE the idea of making a forearm and belly cut on that guitar, but just be aware: you’ll probably end up sanding through the flamed maple veneer on that body, exposing the grain of the wood underneath that veneer. It might not be totally bad looking, but it probably won’t be seamless.
My parts have been delayed, too. Canada Post delivers 18% of parcels in Canada. Without them the courriers are overloaded. So go for it! Have some fun with it. Remember those "OUCH" patches for cars? 😅 Decent levelling of frets. They must have a pretty surefire way of pressing the frets into the slots.
If you're willing and have the tools, I'd love to see you try the body contour! That would be an interesting journey! Gotta love trying something new 😊 Cheers, J-Man!
What a journey. Get that sander out! We want to see you do that. Having never done it I can't offer any thoughts about doing it. But I know with your shoulder the forearm relief would serve you well. Oh, and you should paint that ugly guitar Orange (smile). Rock on!
@@j-man9457 You won't believe this but my first "customer" (non-paying friends and family 100% discount, ha!) wants me to repair and refinishing a guitar. No joke. Its a surprise so I can't post until after the fact and the guitar is given to the person's family member. Crazy.
Nice idea with the carbon fiber sheet under the Tease pickguard! Wait on the forearm cut, you can always do that later. Once you have all your black hardware, that blue burst finish might look a lot better. What about pickups?
@j-man9457 I missed about the pickups. Sorry 'bout that but I promise I'm paying attention. This is an interesting project, it'll be fun to hear you play it out at a gig.
@markpell8979 haha thanks, I'm filling in for a band on the 21st and was hoping to have it ready for then, however parts are delayed. Finger's crossed haha!
nice "modding" start! hekk yaa its your guitar so i say fix it up as you wish hahaha!!! i destrung "snow puff"(white LP jr)and cleaned it up a bit...gotta get the parts together for the "3 in 1" pup project.....
Hi J man, enjoy your channel,, if bevel on the front heightens your playing experience...go for it, I'm the kind of guy that would cut the bevel and then use flame maple veneer to match up to the existing top, I did something similar to that on a bass and it turned out beautiful
I’d do the arm carve and stain it blue to match the back. It would be interesting to see if the black Musiclily pro bridge w/ 5 mounting screws & 6 saddles would have been an exact match for the factory bridge.
Belly cuts and forearm reliefs should be required by law. I have a PRS SE CE Standard I am either going to sell or put a smooth forearm relief with a rounded edge on it. Will have to paint it if I cut on the guitar. Definitely put the forearm relief on yours. It will make that slab of wood a little lighter too.
Man my amp wasn't supposed to arrive until yesterday and I got it Friday morning. This time year everything in shipping is wonky. Sorry about that J man. I really like what you are doing for that Leo Jaymes.
@@615theGuitar hey when it comes to gear the earlier it arrives the better hahaha! Not sure how far I want to take this Leo Jaymz tele... Even upgraded, it may not be worth the effort haha. Stay tuned lol!
If you do the contour apply tru oil to seal it and the grain will pop. I would remove all that yellow off the neck and stain it blue or black then seal with tru oil.
@@j-man9457 I want to see the contoured body bar and not going to lie, even being a budget guitar, I'm scrumming trying to think of doing that myself. I would mess it up. I am about to try and change out frets for the first time, never removed them feel like ill mess it up.
@Ro-Bucks cool man... Just heat them up by passing a soldering Iron over them first, and a good pair of pullers and you should be good... Your going to have to re-sand and probably re-seal the fret board regardless anyway...😃
I would do the body contour. I would take off that yellow poly on the neck wood like all of it. I think you would like it better looking like the way you did the back of the neck. 👍
I don't know if you ordered everything on one order or not. But if you did and one item is delayed, it holds up the whole order. Order all of them separately and let Amazon combine it. I learned this the hard way.
I've had to open the bridge cavity also when I used Wilkinson and some other replacement plates. same thing, fill the outside holes and redrill when the glue is fully dried. The carve can be done like this also by Brad. th-cam.com/video/cIxzBd0YmYA/w-d-xo.html
I'd do the contour. Whatever you do, do not use nitrocellous laquer to paint it. I ried to refinish a guitar with the stuff and it's an absolute nightmare to work with. |I ened up removing it and used Duplicolour instead. iit dries much quicker and polishes up nice. A lot cheaper as well. Ya the postal strile sucks for sure! The Fender mini you sent my way is still in limbo!
I'd get a can of dark matt grey and refinish the whole body after contouring it. That way the guitar would look much nicer with that carbon-fiber pick-guard, black hardware and the yellow neck. That blue burst finish is just ugly as heck..
@@curtisc9350 hey Curtis, I never saw a comment from you until now, so I'm not sure... I have heard of others having that issue as well. Must be some YT AI thing. Try reposting... 🤔
👎on the body contour. You went to all the trouble of cutting out the carbon fiber and buying all of the black parts to make it look better. I think the body contour would look terrible.
If you are thinking of sanding for a contour - may sanding the entire front of the body and going with either a different color or "au-natural".. A bit of work but at least you would get rid of the blemishes on the finish on the front. 🩹
Yeah, I’ve been hearing in the news here in the United States about the problems with Canada Post, too. Hopefully you’ll get the rest of your parts soon! As for what you’ve done so far: It looks like you got things under control! It’s starting to look a little bjt like my Firefly FFTL, if you remember seeing it in my videos! 😂 What you’ve done to that neck makes it look a little like a relic! Regarding the idea of a forearm cut: I have had Telecaster-type guitars with and without comfort cuts, and I find I greatly prefer them WITH comfort cuts, which is another reason I love my Firefly FFTL. I absolutely LOVE the idea of making a forearm and belly cut on that guitar, but just be aware: you’ll probably end up sanding through the flamed maple veneer on that body, exposing the grain of the wood underneath that veneer. It might not be totally bad looking, but it probably won’t be seamless.
@@zuperdee yup thanks!
Yeah I realize I'll ruin the flame top but it's not done very well to begin with anyways hahaha so no big deal lol!
Looking good! Pickguard idea is spot on. You always encourage me to go for it so, go for it!!
All of it💥💪💪💪👍
@@guitarzan0515 hahaha ok contour it is lol!
Seeing as you are looking for a workhorse, I would go for the contour. Very curious to see how that would turn out as well 😅.
“There is no mix-up a sander can’t fix up” - Al Bundy’s dad.
I say go for it. What’s the worst that could happen?
My parts have been delayed, too. Canada Post delivers 18% of parcels in Canada. Without them the courriers are overloaded. So go for it! Have some fun with it. Remember those "OUCH" patches for cars? 😅 Decent levelling of frets. They must have a pretty surefire way of pressing the frets into the slots.
@@calbrockocat8728 hahaha gonna give it a try I guess lol!
Hey J-Man! Hello from Vancouver Island brother. 😀🇨🇦
@@jamieremus277 hey A fellow Islander!
Cheers Brother!
I think the contour idea is good, I’m just not sure how I would finish it.. hello from north central Indiana! 🎸
If you're willing and have the tools, I'd love to see you try the body contour! That would be an interesting journey! Gotta love trying something new 😊 Cheers, J-Man!
@TonJager72 cool man! I can get the tools! Hahaha!
What a journey. Get that sander out! We want to see you do that. Having never done it I can't offer any thoughts about doing it. But I know with your shoulder the forearm relief would serve you well. Oh, and you should paint that ugly guitar Orange (smile). Rock on!
@@TedTalksGuitars I may just do that! Hahaha
@@j-man9457 I got my popcorn ready!
@TedTalksGuitars Hahaha!
@@j-man9457 You won't believe this but my first "customer" (non-paying friends and family 100% discount, ha!) wants me to repair and refinishing a guitar. No joke. Its a surprise so I can't post until after the fact and the guitar is given to the person's family member. Crazy.
@TedTalksGuitars right on man! Do it!
Nice idea with the carbon fiber sheet under the Tease pickguard! Wait on the forearm cut, you can always do that later. Once you have all your black hardware, that blue burst finish might look a lot better. What about pickups?
@@markpell8979 yeah I may hold off... I mentioned in the video that I have a set of PegCity pickups here that I'm going to install...👍
@j-man9457 I missed about the pickups. Sorry 'bout that but I promise I'm paying attention. This is an interesting project, it'll be fun to hear you play it out at a gig.
@markpell8979 haha thanks, I'm filling in for a band on the 21st and was hoping to have it ready for then, however parts are delayed. Finger's crossed haha!
Totally brilliant ❤
nice "modding" start!
hekk yaa its your guitar so i say fix it up as you wish hahaha!!!
i destrung "snow puff"(white LP jr)and cleaned it up a bit...gotta get the parts together for the "3 in 1" pup project.....
@@birdman316 thanks and nice!
Lookin good J-man!
@@tom7073 Thanks! Hope I'm not wasting my time on this hahaha!
Hi J man, enjoy your channel,, if bevel on the front heightens your playing experience...go for it, I'm the kind of guy that would cut the bevel and then use flame maple veneer to match up to the existing top, I did something similar to that on a bass and it turned out beautiful
@@GeraldA-o6p cool! Good idea!
I’d do the arm carve and stain it blue to match the back.
It would be interesting to see if the black Musiclily pro bridge w/ 5 mounting screws & 6 saddles would have been an exact match for the factory bridge.
Did you receive a guitar from Tease Guitars for review yet?
Belly cuts and forearm reliefs should be required by law. I have a PRS SE CE Standard I am either going to sell or put a smooth forearm relief with a rounded edge on it. Will have to paint it if I cut on the guitar. Definitely put the forearm relief on yours. It will make that slab of wood a little lighter too.
@@gunsnguitars77 stay tuned hahaha!
I’d say get the sander out and go for it J-man!
@@doghouseRMV 👍
Man my amp wasn't supposed to arrive until yesterday and I got it Friday morning. This time year everything in shipping is wonky. Sorry about that J man. I really like what you are doing for that Leo Jaymes.
@@615theGuitar hey when it comes to gear the earlier it arrives the better hahaha!
Not sure how far I want to take this Leo Jaymz tele... Even upgraded, it may not be worth the effort haha. Stay tuned lol!
@j-man9457 I don't always comment but I try to always watch your videos. I really enjoy your presentation, always a great job!
@615theGuitar much appreciated man!
If you do the contour apply tru oil to seal it and the grain will pop. I would remove all that yellow off the neck and stain it blue or black then seal with tru oil.
@@dbrown6451 great advice!
1st step, get it playing right! If it's good then I will overhaul it hahaha!
I like the idea of the contour on the front, would be cool if you could match the yellow of the neck wood on the contour.
@@Ro-Bucks hmmm interesting 🤔 will see what gives!
@@j-man9457 I want to see the contoured body bar and not going to lie, even being a budget guitar, I'm scrumming trying to think of doing that myself. I would mess it up. I am about to try and change out frets for the first time, never removed them feel like ill mess it up.
@Ro-Bucks cool man... Just heat them up by passing a soldering Iron over them first, and a good pair of pullers and you should be good... Your going to have to re-sand and probably re-seal the fret board regardless anyway...😃
I would do the body contour.
I would take off that yellow poly on the neck wood like all of it. I think you would like it better looking like the way you did the back of the neck.
👍
@@Vern859 I would like it better for sure but the pocket would be looser cause this stuff is thick and it's a pain in the neck to remove! Haha
I don't know if you ordered everything on one order or not. But if you did and one item is delayed, it holds up the whole order. Order all of them separately and let Amazon combine it. I learned this the hard way.
@@TJBrennan58 crap I did order everything together! However I did get my bridge, but nothing else... Weird!
Get out the sander!
@@barackmycat9448 hahaha!
The carbon fibre neck would be sweet on that build, but they are too darn expensive. 🤔
@@jamieremus277 yeah for sure! Ridiculously expensive! Not worth it! Haha
I think leo jaymz also sells unfinished necks with the same headstock.
@@patrickbryant-cn9cy yeah? Well they should put them on these builds as well hahahaha!
Check out the brand guitar called: Censtar ... their Tele
I've had to open the bridge cavity also when I used Wilkinson and some other replacement plates. same thing, fill the outside holes and redrill when the glue is fully dried. The carve can be done like this also by Brad. th-cam.com/video/cIxzBd0YmYA/w-d-xo.html
@@2bikemikesguitartopics145 awesome Thanks Man!
I wood not contour the top. lol.
I'd do the contour. Whatever you do, do not use nitrocellous laquer to paint it. I ried to refinish a guitar with the stuff and it's an absolute nightmare to work with. |I ened up removing it and used Duplicolour instead. iit dries much quicker and polishes up nice. A lot cheaper as well. Ya the postal strile sucks for sure! The Fender mini you sent my way is still in limbo!
@@rainerjaschke5216 oh my god! Are you serious? They still haven't delivered that? Grrrrrrr!
relic it!
@@philmcglauflin you know I actually thought of that! 🤔
Never know!
Since I'm not.a.fan of the color, why not.put the forearm contour on it
I would paint it black though
@@No1414body yup leaning towards the contour 😃
I'd contour it. Why not make it comfortable?
@@Timtime67 that's what I'm thinking too... 🤔
NOOOOOOOOOOOOOOOOOOOO Hahahahahahahahaha
i was playing mine today!
Body contour? Nah,that top veneer would give problems...............................................
@@russellharris5072 yeah no doubt but I don't really like the look of it anyway so I may just do it anyway lol!
I'd get a can of dark matt grey and refinish the whole body after contouring it. That way the guitar would look much nicer with that carbon-fiber pick-guard, black hardware and the yellow neck. That blue burst finish is just ugly as heck..
@@ItsaCatsLife good suggestion! Yeah it's ugly as heck lol!
Why was my Comment removed, shortly after I posted It ? 🤔
@@curtisc9350 hey Curtis, I never saw a comment from you until now, so I'm not sure... I have heard of others having that issue as well. Must be some YT AI thing. Try reposting... 🤔
th-cam.com/video/-dwaYlAs0FU/w-d-xo.htmlsi=48MttbJooA7fPOV1
I made a Reply Comment to your Reply, but, it was Deleted too ! 🤔
@curtisc9350 what is going on? That is weird...
James Tyler Guitars offers a Bare Arm-Cut to their Finish options .
Most likely due to the strike, it sucks.
@@brittboyette461 yup it does!
👎on the body contour. You went to all the trouble of cutting out the carbon fiber and buying all of the black parts to make it look better. I think the body contour would look terrible.
@@danrunnoft6642 no doubt it would! Hahaha
If you are thinking of sanding for a contour - may sanding the entire front of the body and going with either a different color or "au-natural".. A bit of work but at least you would get rid of the blemishes on the finish on the front. 🩹
@@Acreustic yeah I may just do that man!