I’ve had a 6S box since 1998. Best tool box I’ve ever purchased and I’ve owned them all in 30 years. I’m out of room but my career is coming to a close so I’m not going into debt for more toolboxes at this point.
And I was just searching for a professional who could give me pointers on organizing my new/old toolbox! Very impressive! I'm just trying to rebuild an old 56 Chevy with some basic tools, this was like tool porno! ;) Great job!
*With those tall drawers on the top chest, it would be cool if the bottom chest had a "step drawer". Literally a thin drawer that pulls out and is designed for you to step up and, gives you a 3 or 4 foot platform to stand on. Then you could reach the very top of your box too.*
After watching your video I had to hit subscribe I strive to have a tool box with nice tools like that been a diesel apprentice for about a year now its coming along but nothing like yours stay humble my friend great videos
My first 6s box was from 2009 double bank 56 inch long 25 deep ran out of room in bought a side box because matco didn’t make a top box for it anymore in that depth and I just traded it in on a 87 inch triple bank 6s I think 31 deep but it’s a bad ass box
I really like that tool cart from Milwaukee, I haven't seen that one yet. Just a heads up..... you never want to use a cheap tap and die set. Trust me on this and just give it to somebody you don't like.
I have a question I see you have those chevy cruse in there I have one with a crank no start but has fuel and spark guy said a coolant line blew and was parked after any idea?
variety of brands but still limited to just a few. Fitted tool boxes are so much better for your life. You need to tell people you’re not going to do every job. Your life is too short for that. I bet you don’t enjoy pulling a 40 kilogram weight drawer. So, you’re pulling the weight of 40 kilograms just to get something that weighs 5 ounces.
Nice box tour, and such a sweet box! Do you know what year your bottom box is? I am curious when Matco went from 3 lock tumblers to 1 single one on the 3-bank 6S
That 10mm set is the exact same set they sell at AutoZone. I have that set. However I actually bought it cause I misplaced my 3/8s deep 10mm and it came with magnetic ones just like the set you have.
Are those rbrt mac bits I see…? If it is use them on all bolts even if they ain’t rounded out they will keep bolts from becoming stripped I got all the master sets I could and I love them.
26:19 I been watching to pick those up for a long time but don’t have Mac anymore. Only people that have them is blue point and think they wanted like $800 or something like that.
I'm more then certain you didn't choose this color combo for this reason but it has the Poké Ball colors! The aside though this is a pretty badass set of tools you got.
Why didn't you make this video using your GoPro, just curious? Nice Toolbox BTW I like the color of the box and the way it's layed out! Plus the tools in it are really nice.👍
Question for you, Fellow GM Tech here. Does your shop provide you the tpms reset tool or do you have to buy your own? Were required to get our own at the GM Dealership I work at
@@workingclassgarage You would think so, I have my own so I dont have to worry about it. But they really dont provide us with those kind of things. Just our specialty tools in our tool room
I KEEP A GUN in my art supply toolbox - a 32 cal handgun wrapped in a hand wipe. WHY? Because the value of the whole box and its contents is about $5,000! I also have a box just for expensive paintbrushes - that's worth $10,000. Some of the brushes individually were $250 - $400 - etc. The box is full of top-quality brushes. A box chocked full oils and acrylics and gouache paints could buy a new car. That's why I keep a small handgun handy.
I just thought the whole gun thing was kind of amateurish, that’s why I keep LMT AR15 and a Remington 870 in my one side locker. If SHTF, a 380 isn’t the answer. True story, I don’t make crap like that up.
great video nice stuff... like seeing a guy who likes matco rather than just snap on n mac... interesting stuff.. one comment tho what you were calling "inverted torx" is actually "external torx" or "E-Torx" peace bro... nice gear
Yeah the speaker sounds great! It’s not the loudest speaker but what I like about it is you can turn it up all the way and it still sounds good, very little distortion and breaking up.
I have to ask I'm about ready to buy a matco tool box locker myself is it worth getting the sliding selves looks like you have them and you are not using them wondering if it's worth getting them
Hello Sr. How you doing? Good videos Sr, lot of information about it but I have a question. I'm a DYI weekender warrior and I drive a semi truck. Now should I buy Grey Pneumatic 1/2" Drive 6-Point Standard and deep Length Metric Duo-Socket Set, to have the best of both worlds or just Grey Pneumatic 1/2" Driver Metric Standard and Deep length??????
I still use my air tools honestly I only use my electric tools if I’m going somewhere like the parking lot or road I take my electric stuff. I really wanna get the new ingersolrand d handle 1 inch electric impact claims to have about 2000 plus ft lbs of break away torque I’ll prolly get the new Milwaukee In the same configuration it’s cheaper and not out of stock and actually been tested idk about the ir I want it but it’s like 3 bands
I am looking at getting a used 6s with the center hutch because I really like how much extra tool storage you get with the drawers. That being said, I'm coming from a regular 2 bay hutch and I'm worried that I might feel too cramped in the smaller center hutch. Do you find it pretty usable for a laptop and maybe a clipboard with R.O.'s on it? I like having a surface I can write my stories on.
I know that you said your t-handled drivers are your only Cornwell tools but aren't your torque bits in the blue case Cornwell? I'm almost sure of it because i have the same bits and case.
Specializing in Toyota/Honda-has saved me a fortune in tools. 10,12,14,17,19mm and you’re going to be able to do 98% of anything on them. Freakin domestics cannot figure out how to have any uniformity in fasteners.
38:29 When you had to try to show off the gun I had to say..SAD.. Im sure youll say, but a guy was robbed next to me and he gave up his 3/8 extension set... No Way will I do that.. I have a Force Multiplier in my drawer... Please put it in the Locking drawer under cover.... Nobodys impressed by a gun when watching a tool box tour
Next time you order something and the guy hands it to you in green just tell him to re-order them in the color you want. I will tell my guy straight up I don't want them, kind of a dick like that.
I’ve had a 6S box since 1998. Best tool box I’ve ever purchased and I’ve owned them all in 30 years. I’m out of room but my career is coming to a close so I’m not going into debt for more toolboxes at this point.
And I was just searching for a professional who could give me pointers on organizing my new/old toolbox! Very impressive! I'm just trying to rebuild an old 56 Chevy with some basic tools, this was like tool porno! ;) Great job!
Nice setup i remember when I worked for Gm for 16 years heavy line I miss it now im heavy equipment mechanic big difference
Lots of tools , great set up. I like that Red & White layout
I love your toolbox man, your sockets are out of this world. I love how you got harbor freight and snap on in the same box.
*With those tall drawers on the top chest, it would be cool if the bottom chest had a "step drawer". Literally a thin drawer that pulls out and is designed for you to step up and, gives you a 3 or 4 foot platform to stand on. Then you could reach the very top of your box too.*
That color combo make this probably the best looking box on TH-cam.
psfanboy79 Thanks!
@@workingclassgarage fersure man
I think its rubbish but that's just me
Fugly
Arguably the best tool setup on the tube
Love the mini hutch in the box looks very smart, great looking box
What is that specifically called i cannot find them
The most important tool in the box. Ruger 9mm. 👍 Never know when you will need it. Keep one in my home box.
After watching your video I had to hit subscribe I strive to have a tool box with nice tools like that been a diesel apprentice for about a year now its coming along but nothing like yours stay humble my friend great videos
That cart is sick. Can’t wait to see the video on the Milwaukee power tools
AMAZING set of tools, it takes a ton of tools to work on stuff today. Like you have spent a lot of money on tools but they make you money. : )
Amazing toolbox and fantastic tool selection 👍
My first 6s box was from 2009 double bank 56 inch long 25 deep ran out of room in bought a side box because matco didn’t make a top box for it anymore in that depth and I just traded it in on a 87 inch triple bank 6s I think 31 deep but it’s a bad ass box
AWESOME BOXES and tools!!!!!!!!!!!!!!!!!!! METRIC as well Yamaha/Kawi shop
From one GM tech to another, nice box brotha. I'm actually getting the same box. Should be in next week.
Very awesome box and nice setup
Alwys count on a great tool tour video to brighten my day. Man love your set up brother.. like my 3rd time watching it. Lol. Cheers.
Great tour . All ready to tackle any job. Good job
No.
The NON tools get in the way and spoil all the fun. Remind yourself you’re NOT paying $1000 to store tape and razor blades.
Dreyn 77 way more than 1k
Красота! Крути-верти, ремонтируй до посинения)
I really like that tool cart from Milwaukee, I haven't seen that one yet. Just a heads up..... you never want to use a cheap tap and die set.
Trust me on this and just give it to somebody you don't like.
I feel like I have heard the song at 21:00 min on another tool box tour but could be wrong cause I do watch tours more than once love the box
I have a question I see you have those chevy cruse in there I have one with a crank no start but has fuel and spark guy said a coolant line blew and was parked after any idea?
Very impressive setup sir!
Love the box a lot of nice stuff and a variety of brands
Yeah, a JAMMED IN tool box/ department store box.
variety of brands but still limited to just a few.
Fitted tool boxes are so much better for your life.
You need to tell people you’re not going to do every job.
Your life is too short for that.
I bet you don’t enjoy pulling a 40 kilogram weight drawer.
So, you’re pulling the weight of 40 kilograms just to get something that weighs 5 ounces.
Sick boxes and the new mac one also I dig your set up!
Icon box looks better for the money. I’m getting one for sure after watching this video.
Nice box tour, and such a sweet box! Do you know what year your bottom box is? I am curious when Matco went from 3 lock tumblers to 1 single one on the 3-bank 6S
Great video sweet box
Badass box great tour I saw some stuff I want
That 10mm set is the exact same set they sell at AutoZone. I have that set. However I actually bought it cause I misplaced my 3/8s deep 10mm and it came with magnetic ones just like the set you have.
Ha, you win ! Nice kit you put together, there isn’t much you can’t do with that set up !
That set up is amazing! I've never seen that color combo...the ratchet drawer was slightly disappointing...lol.
Great video 👍 nice looking box!!
Loved the tour man! Thanks!
Man I love that setup!!
I don’t.
Matco 6s are my favorite toolbox! I wonder with the Revel series being their new thing if us 6s/5s/4s toolbox owners will be able to add on to those?
Hopefully they don’t take those lines away any time soon because I’d love to add on to mine!
This guy is dedicated to off brand stuff
That's a crazy setup!!!!
Awesome to see you rockin all the Milwaukee!!
I really love all my Milwaukee tools as well!
Keep up the great vidz!
How has it been keeping the white clean? Looks really nice btw.
Need to get a locker for my box, so expensive though.
Are those rbrt mac bits I see…? If it is use them on all bolts even if they ain’t rounded out they will keep bolts from becoming stripped I got all the master sets I could and I love them.
Man👀 this is a really cool box!!!!!!!
Matco for the win😎
26:19 I been watching to pick those up for a long time but don’t have Mac anymore. Only people that have them is blue point and think they wanted like $800 or something like that.
Very impressive collection!
WoW nice collection of tools
I'm more then certain you didn't choose this color combo for this reason but it has the Poké Ball colors! The aside though this is a pretty badass set of tools you got.
Why didn't you make this video using your GoPro, just curious? Nice Toolbox BTW I like the color of the box and the way it's layed out! Plus the tools in it are really nice.👍
Super nice man 👍
What's the part number for the mac rounded hex set? Dream setup man.
SXH14RBRT
Nice box man two question what size box is that and how deep? Thx...
Question for you, Fellow GM Tech here. Does your shop provide you the tpms reset tool or do you have to buy your own? Were required to get our own at the GM Dealership I work at
I have my own but my shop did provide one. Your dealership should provide you one, it’s an essential tool.
@@workingclassgarage You would think so, I have my own so I dont have to worry about it. But they really dont provide us with those kind of things. Just our specialty tools in our tool room
What is the part number for the Snap-on 1/4 drive swivel??
PAKTY476
Actually that was the part number for the tray they're in. I think the part number is 106IPTMMA
Hey how long ago did you get that doubled end Pittsburgh pro ratchet .. can’t find it anywhere but I NEED that haha
Just casually doesnt mention the gun in the standard overflow drawer. Right on lmao nice collection, box is mint.
I KEEP A GUN in my art supply toolbox - a 32 cal handgun wrapped in a hand wipe. WHY? Because the value of the whole box and its contents is about $5,000! I also have a box just for expensive paintbrushes - that's worth $10,000. Some of the brushes individually were $250 - $400 - etc. The box is full of top-quality brushes. A box chocked full oils and acrylics and gouache paints could buy a new car. That's why I keep a small handgun handy.
I just thought the whole gun thing was kind of amateurish, that’s why I keep LMT AR15 and a Remington 870 in my one side locker. If SHTF, a 380 isn’t the answer. True story, I don’t make crap like that up.
great video nice stuff... like seeing a guy who likes matco rather than just snap on n mac... interesting stuff.. one comment tho what you were calling "inverted torx" is actually "external torx" or "E-Torx" peace bro... nice gear
Why these tools look like they never been used? Impressive collection though
Great tour. Thank you.
my eyes is blow up! but many tools are not used. may be one day..
I just got my first box with blue green white yellow red tools looks so stupid but it works
You missed something and that is an air compressor lol 😂😂👍👍
But seriously that's one of the best tool box I've ever seen so far
Model info on the box? I love it honestly
Does the Milwaukee speaker have good sound? By the way I love your videos I am a 12 year old Junior mechanic
Yeah the speaker sounds great! It’s not the loudest speaker but what I like about it is you can turn it up all the way and it still sounds good, very little distortion and breaking up.
What’s the part number on those snap on tight sockets? The ones you said that you might make a video on
I have to ask I'm about ready to buy a matco tool box locker myself is it worth getting the sliding selves looks like you have them and you are not using them wondering if it's worth getting them
Hello Sr. How you doing?
Good videos Sr, lot of information about it but I have a question.
I'm a DYI weekender warrior and I drive a semi truck. Now should I buy Grey Pneumatic 1/2" Drive 6-Point Standard and deep Length Metric Duo-Socket Set, to have the best of both worlds or just Grey Pneumatic 1/2" Driver Metric Standard and Deep length??????
Is that a actual GoPro? And if so where did you get it with the accessories and case like that?
Awesome dude!
That side locker could be a portable loo
I still use my air tools honestly I only use my electric tools if I’m going somewhere like the parking lot or road I take my electric stuff. I really wanna get the new ingersolrand d handle 1 inch electric impact claims to have about 2000 plus ft lbs of break away torque I’ll prolly get the new Milwaukee In the same configuration it’s cheaper and not out of stock and actually been tested idk about the ir I want it but it’s like 3 bands
Wow, so let's get to it. How much does the entire chest cost? 1, 2, or 3 year salary?
Yo love the channel brother I'm a master tech here in Arizona I was wondering where did you get that little wrench rack for ignition style wrenches
You’re like a penguin. You want stuff for free with NO personal input into the community.
Whats the top box called? I wanna get a matco box and I really like that top
I wish you are paid enough for all the expensive tools that you have
Nice
Lease is expired on ur gds2? Must not use it very often, outher one is nice to have is tech2 win
I am looking at getting a used 6s with the center hutch because I really like how much extra tool storage you get with the drawers. That being said, I'm coming from a regular 2 bay hutch and I'm worried that I might feel too cramped in the smaller center hutch. Do you find it pretty usable for a laptop and maybe a clipboard with R.O.'s on it? I like having a surface I can write my stories on.
Impressive!
I know that you said your t-handled drivers are your only Cornwell tools but aren't your torque bits in the blue case Cornwell? I'm almost sure of it because i have the same bits and case.
Can you do a video on that Nes set?
I plan on it!
Specializing in Toyota/Honda-has saved me a fortune in tools. 10,12,14,17,19mm and you’re going to be able to do 98% of anything on them. Freakin domestics cannot figure out how to have any uniformity in fasteners.
What is one tool,item that you wish you had or you wish you wouldn’t of got?
Bunch of RANDOM drawers
Nice RBRT set those are the cats ass
Part number on that half size socket set for lug nuts?
Steelman Pro 60443
Where did you say you buy all your test leads?
Jumperkits.com
@@workingclassgarage *THANKS!!!!!!!!!!!!!!!!!*
Working Class Garage thanks. And great video.
What is the matco solder auto feed tool?
The top box?
38:29 When you had to try to show off the gun I had to say..SAD.. Im sure youll say, but a guy was robbed next to me and he gave up his 3/8 extension set... No Way will I do that.. I have a Force Multiplier in my drawer... Please put it in the Locking drawer under cover.... Nobodys impressed by a gun when watching a tool box tour
Whats the difference between mac and matco
How many years you've been a tech for???
Right at 10 years
@@workingclassgarage awesome . Thanks keep up the great work. Now I have a few things to get that I've been missing.
What's that matco tool at 9:35 ?
MAC RBRT Hex sockets
That’s a bad bitch of a tool box but god damn I don’t want to know the payments
That’s got to be 100k+ worth of tools
Alpha Artisan I see about 50 grand tops
either way he gonna be paying on that shit for awhile
Everything is mostly paid off, I owe very little. Everything be paid off in less than a year.
Yeah the box alone retails for just over 27k
@@workingclassgarage I hope thats (at least some) tools included...
Damn!
Next time you order something and the guy hands it to you in green just tell him to re-order them in the color you want. I will tell my guy straight up I don't want them, kind of a dick like that.
Baller
Just for the record its pronounced "KA - NIE - PEX" not NIPEX