I really enjoy your very informative videos.. I just went from a 325 John Deere skid steer to a newer 330G and there are a lot of options.. I want to thank you for myself and guys like me that need a little help..
Good video! I've been watching many of your 333g videos to make sure I don't screw anything up with mine, haha! Side note, great camera work. Lots of setup time and editing too. Time consuming. Keep it up!
hey good works could you share your actual costs for your machine. Getting me one this week, would like to know comparable pricing so I can go in there and negotiate the best deal.
Great videos, from the 5E utility tractors to the G series loaders! You always give tons of information and make things easy to understand! Got any 325G specific videos? 331/333 are badass machines, but too much machine for me to lugging around! Would like to see some of this stuff in/on 325G or even some 317 vids! Thanks again, keep the vids coming!
hey boomer could you share your actual costs for your machine if you bought it. Getting me one this week, would like to know comparable pricing so I can go in there and negotiate the best deal.
@@jlmplos I switched and went with New Holland C345. John Deere has jacked their prices up to an unacceptable number that I cannot justify. The NH I got is fully loaded for 77K and does a great job for me so far. I am in love with this machine. I encourage you to do your own research and make the best decision for you and your business. Hope this helps sir.
@@Steelviper61 Do yourself a favor, buy an extended warranty while you still can. I made this same mistake and went with a C345 instead of the Deere I was going to go with thinking I was getting an equivalent machine for a much cheaper price...nope! My machine has had nothing but problems from day 2. The worst part is, New Holland will NOT stand behind their machine. They would not take back their machine after 5 times in the shop in less than a few months of ownership and less than 100 hours. Yes, the warranty keeps paying to fix the machine, but parts take forever and the payment is still due despite it being in the shop for weeks at a time. I have a new 333G on order and can not wait to get rid of this horrible C345. Check all over youtube and their facebook page and you will see the majority of the reviews of the machine are negative. I wish you the best of luck with yours, but odds are against you. Again, get the extended warranty if you can so at least they will have to keep paying to fix their junk.
@@matthewdavidson5080 thanks for the advice I did get the extended warranty and so far still very good. My dealership is absolutely awesome. I had one problem with it and they came and got it and fixed it immediately and then brought it back to me. An O ring had not seated properly in the def motor during the manufacturing process. I'll keep an eye out and treat it with care. Thanks again.
Great video.... very informative. I purchased a JD 317G which should be standard flow but my male couple how far right will not accept a standard flow female. Is it possible that the prior owner installed a high flow track Loader set up on the unit ? Also, can HF connections be used on standard flow machine ?
I will be adding a tree spade attachment for my 333G. It has a handheld pendant controller with seven toggle switches to operate the seven cylinders. What is the proper procedure for directing a constant flow to the tree spade? To me it's a little different situation than powering up a mower which starts spinning up with the right hand roller switch and then locked into position via the bottom corner left hand switch. Can I initiate flow with the roller and will it automatically flow back into the return port until I direct it into the tree spade cylinders? Any help is appreciated. Thanks , Len
Great video I just got a 333g high flow and a high flow brush cutter do you start it in standard flow then hit the high flow button or just start it with high flow already turned on ? Thank you
Thank you! You want to turn your high flow on and then give it a minute to get up to speed and then engage you cutter. Good question and thanks for watching!
I believe there is a hydraulic override option, but this may need to be activated by your local dealership. Have you called your dealership about this?
Hi, I recently purchased a 333D with high flow "verified by my local JD dealer through a SN search". 1st thing is it didn't come with a case drain. I added the case drain but for some reason, the high flow won't engage when pressing the switch. Any ideas?
This is just a 4th function electric control. Basically a control for if an attachment needs a 4th function. I hope this makes sense and thanks for watching!
Starting a position as a heavy equipment operator Monday, you earned my like and subscription.. Attaboy!
Awesome! Congrats on the new position! I’m glad I could help and thanks for watching!
I really enjoy your very informative videos.. I just went from a 325 John Deere skid steer to a newer 330G and there are a lot of options.. I want to thank you for myself and guys like me that need a little help..
Good video! I've been watching many of your 333g videos to make sure I don't screw anything up with mine, haha!
Side note, great camera work. Lots of setup time and editing too. Time consuming. Keep it up!
Coming from the pro himself! Thanks for the comment and you’ve got some great content as well.
hey good works could you share your actual costs for your machine. Getting me one this week, would like to know comparable pricing so I can go in there and negotiate the best deal.
Great videos, from the 5E utility tractors to the G series loaders! You always give tons of information and make things easy to understand! Got any 325G specific videos? 331/333 are badass machines, but too much machine for me to lugging around! Would like to see some of this stuff in/on 325G or even some 317 vids! Thanks again, keep the vids coming!
I plan on trying to hit on these smaller frame machines soon so stay tuned! Thanks for watching!
Great video Brent! Lots and lots of great information! That's one awesome machine! Thanks for sharing! Have a great and awesome day!
Thank you Vincent and I totally agree with you, it is pretty awesome!
I'm grabbing me a 331G next month, keep the vids coming, Brent!! Next time with attachments?😁
Stay tuned! More attachments to come! Thanks for watching!
hey boomer could you share your actual costs for your machine if you bought it. Getting me one this week, would like to know comparable pricing so I can go in there and negotiate the best deal.
@@jlmplos I switched and went with New Holland C345. John Deere has jacked their prices up to an unacceptable number that I cannot justify. The NH I got is fully loaded for 77K and does a great job for me so far. I am in love with this machine. I encourage you to do your own research and make the best decision for you and your business. Hope this helps sir.
@@Steelviper61 Do yourself a favor, buy an extended warranty while you still can. I made this same mistake and went with a C345 instead of the Deere I was going to go with thinking I was getting an equivalent machine for a much cheaper price...nope! My machine has had nothing but problems from day 2. The worst part is, New Holland will NOT stand behind their machine. They would not take back their machine after 5 times in the shop in less than a few months of ownership and less than 100 hours. Yes, the warranty keeps paying to fix the machine, but parts take forever and the payment is still due despite it being in the shop for weeks at a time. I have a new 333G on order and can not wait to get rid of this horrible C345. Check all over youtube and their facebook page and you will see the majority of the reviews of the machine are negative. I wish you the best of luck with yours, but odds are against you. Again, get the extended warranty if you can so at least they will have to keep paying to fix their junk.
@@matthewdavidson5080 thanks for the advice I did get the extended warranty and so far still very good. My dealership is absolutely awesome. I had one problem with it and they came and got it and fixed it immediately and then brought it back to me. An O ring had not seated properly in the def motor during the manufacturing process. I'll keep an eye out and treat it with care. Thanks again.
Great video.... very informative. I purchased a JD 317G which should be standard flow but my male couple how far right will not accept a standard flow female. Is it possible that the prior owner installed a high flow track Loader set up on the unit ? Also, can HF connections be used on standard flow machine ?
This could be possible and yes the high flow couplers can be used for standard flow.
this video was clutch... thank you!
Glad I could help and thanks for watching!
I will be adding a tree spade attachment for my 333G. It has a handheld pendant controller with seven toggle switches to operate the seven cylinders. What is the proper procedure for directing a constant flow to the tree spade? To me it's a little different situation than powering up a mower which starts spinning up with the right hand roller switch and then locked into position via the bottom corner left hand switch. Can I initiate flow with the roller and will it automatically flow back into the return port until I direct it into the tree spade cylinders? Any help is appreciated. Thanks , Len
Great video. Very informative. Thanks
Thank you and thanks for watching!
Great video I just got a 333g high flow and a high flow brush cutter do you start it in standard flow then hit the high flow button or just start it with high flow already turned on ? Thank you
Thank you! You want to turn your high flow on and then give it a minute to get up to speed and then engage you cutter. Good question and thanks for watching!
Got a video on taking off the hydraulic lines?
How do you keep hydraulics activated/on when you need to get out of tge machine? To operate a backhoe attachment...
I believe there is a hydraulic override option, but this may need to be activated by your local dealership. Have you called your dealership about this?
Hi, I recently purchased a 333D with high flow "verified by my local JD dealer through a SN search". 1st thing is it didn't come with a case drain. I added the case drain but for some reason, the high flow won't engage when pressing the switch. Any ideas?
What’s the aux switch for with left and right arrows up on dash
What size faster are on the block FFH08?
Where can one find the hydraulic filter on a 333G track steer?
These are located under the cab.
Very helpful.
I am assuming it is just an extra switch for anything to be added
I think I answered this on your last comment but again, thanks for watching!
what is the AUX switch for on a john deere 325G?
This is just a 4th function electric control. Basically a control for if an attachment needs a 4th function. I hope this makes sense and thanks for watching!
Will high flow work in both directions?
I’m assuming you mean if you have attachments that spin in different directions and if so, then yes it will.
Can you make the same video with less useless info please good video jus lot of useless info