Very helpful, I was doing an Akrapovic install, used your video (primary) and their paper instructions. Great Job on the Lambda sensor details and connector locations.
Hello sir,nice video I have a question,,do you know what size of inlet diameter OEM muffler link pipe of BMW R9T 2023 ? I'm happy if you can reply my comment,thank you and best regards 🙂
Very helpful video! Would you need an ecu remap (rapid bike evo) if you only change the headers but not the air box? I'm afraid you may have to, since you lose the catalytic converter and the flapper valve.
My dealer told me no. Installed system this morning and has been running fine and no codes showing yet. They did recommend a servo buddy to plug into the servo connector. Fools the computer and avoids nuisance codes.
great video guys, i didnt know that the Euro5 model had a 3rd lambda sensor. now that brings me to a question, if i see it right the unit garage headers have no cat, shouldnt the after cat lambda sensor throw some errors now that the cat is gone?
Great instructional video 👏🏻👏🏻👏🏻 I'm very happy with my cosmetic purchases from you guys, and after this video I'm sure new headers will be next! My stock '22 R9T is quite anemic sounding compared to a '20 Scrambler I rode, I've heard the headers help.... but how do I get some nice "pops" on decel as well?
I watched another video of a guy installing a UG header on his 2021. He removed the cables from the servo motor and reinstalled the servo motor without the cables, instead of using a servo buddy. Would that also serve to avoid any fault codes just the same as a installing a servo buddy? Thanks!
To our knowledge, there are no regulations in place regarding emissions for MOT testing in the UK. However, fitting the headers would impact the bikes noise level, ie. making the bike louder and therefore it would be down to the individual MOT tester as to whether it passes or not.
That was the best video instruction so far. I thank you.
Very helpful, I was doing an Akrapovic install, used your video (primary) and their paper instructions. Great Job on the Lambda sensor details and connector locations.
Hello sir,nice video
I have a question,,do you know what size of inlet diameter OEM muffler link pipe of BMW R9T 2023 ?
I'm happy if you can reply my comment,thank you and best regards 🙂
I wonder can this be done on the R1200RT oil cooled as it's the same engine?
Very helpful video! Would you need an ecu remap (rapid bike evo) if you only change the headers but not the air box? I'm afraid you may have to, since you lose the catalytic converter and the flapper valve.
My dealer told me no. Installed system this morning and has been running fine and no codes showing yet. They did recommend a servo buddy to plug into the servo connector. Fools the computer and avoids nuisance codes.
If you change the headers, and valve flap delete would you need a new ECU or rapid bike fueling module?
No need to add fuelling unless you doing pod filters as well.
Do you need to tune for change the R9T header?
great video guys, i didnt know that the Euro5 model had a 3rd lambda sensor. now that brings me to a question, if i see it right the unit garage headers have no cat, shouldnt the after cat lambda sensor throw some errors now that the cat is gone?
It's a good question but we've fitted a number of these now and we've never had any issues or any feedback to suggest this is the case, thankfully!
Is mounting a Rapid Bike EVO possible after this mod ?
Hello, love the video. I have a question about the power output. Do you know how much more you get when you just change the headers?
Negligible, some brands quote 2hp to 5hp but we've never tested to confirm.
Great instructional video 👏🏻👏🏻👏🏻 I'm very happy with my cosmetic purchases from you guys, and after this video I'm sure new headers will be next! My stock '22 R9T is quite anemic sounding compared to a '20 Scrambler I rode, I've heard the headers help.... but how do I get some nice "pops" on decel as well?
To be honest, most aftermarket headers and/or end cans tend to give you more pops that the standard bike.
ECU modification
can you upload a sound check of this Bike?
Not this one specifically now, but we do have a couple of very similar bikes in our TH-cam playlist with the UG headers fitted.
I watched another video of a guy installing a UG header on his 2021. He removed the cables from the servo motor and reinstalled the servo motor without the cables, instead of using a servo buddy. Would that also serve to avoid any fault codes just the same as a installing a servo buddy? Thanks!
Yes, this too works, however you are left with the large plastic servo unit.
What mirrors are on that bike?
hey guys, if I fit one of these will the bike pass it's annual MOT?
To our knowledge, there are no regulations in place regarding emissions for MOT testing in the UK.
However, fitting the headers would impact the bikes noise level, ie. making the bike louder and therefore it would be down to the individual MOT tester as to whether it passes or not.
Thanks guys
Pipes much too exspensive in the real world.Remus,Akrapovich better value.
Hi Ian. Thanks for your comment. The Unit Garage headers are cheaper than the Akrapovic version and the Remus headers are NLA now.