Thank you for this video I am going to stick my first roof sheets on tonight! I was feeling pretty nervous with the procedure but this makes it look simple.
Another great video Mario . Just goes to show you must do all your prep. The primer and a Sika make a very strong bond. As you say Aluminium and steel should not come into contact. This is where Land Rover dropped the ball years a go with Aluminium door skins on a steel frame.
Awesome info!! Thanks again my friend! Ps. I keep sharing your vids on various forums related to overlanding - I think your videos will help a lot of people!
Yes it does but you need to make sure you prep accordingly, means sanding the metal before painting and also sanding ( roughing ) the paint before primer applying and at all times dust and grease free surfaces.
Great video, greetings from Australia , love the toothpick idea..was thinking 3.2mm spacers but now i wont have to buy. Will be installing roof top mount solar to aluminium canopy …so plastic frame onto solid solar . The plastic frame onto prepared and sanded chequer plate alloy …thanks again
Hallo Oscar, Nice video again. I used this method also on the back of the drivers-cabin and will use it on the habitat also. As you stated: Aluminium on Steel may not have a direct contact with each-other. For the distance between the two materials I took square distance pieces that are used (to keep a constant distance in the edges) when you tile a wall. In fact the function is the same but I don't like any kind of wood in my outer surfaces. Keep on going.....I like to follow you and see you next Friday
Great video that cleared up a lot of stuff in needed to know, i always appreciate experiments and demonstration. Greetings from Poland About to mount 400w solar panels on top of my 1991 Citroen C25 Burstner with aluminium angular profiles, kind of hesitant to trust only glues without any drilling, this video helps me trust such solution more haha! If that works well I will have better understanding on how to add split AC unit on the back as well. Vehicle frame sounds like a most reasonable idea, but perhaps supporting it with sikaflex and original bike rack mounts could work instead.
Yes that Sika stuff is amazing if it is right prepped. Check out this 2min video they pulled with 240kg vertical than the composite panel snapped but the sika glue did not let go ! th-cam.com/video/4DxFRq5BvNk/w-d-xo.html
Oscar, thanks for the great video! tell me, you will not use rivets in the fastening of aluminum sheets? Or will you fasten the corners of the van with aluminum corners through rivets?
Hi thanks for the question ! To use 252 Sika flex efficient you should prime always both surfaces, just make sure you use the right primer for the material you are going to use.
![TEEDEE TADA - DIAMOND NARAKORN X LEGO LYKN [Special Dance Performance]](http://i.ytimg.com/vi/QgtZedFeumA/mqdefault.jpg)
Thank you for this video I am going to stick my first roof sheets on tonight! I was feeling pretty nervous with the procedure but this makes it look simple.
Excellent feeling if it helped you. Good luck with your project !
This is crazy what difference there is with different methods. Thanks for giving this info !
Thank you !
Hallo Oscar! greetings fro Italy! thank you very much for the very informative and helpful videos. You're a gifted teacher!😀
Thanks a lot !
❤Thanks for your video..
Thank you so much for explaining this as it should be explained!!
You're very welcome!
Thanks for sharing 👍 good points with resanding the primer then releasing the dust off
Any time!
Brilliant brilliant brilliant! Looking to use some 252 and hadn't respected just how big a difference the sanding & primer make.
Thank you and all the best with you're project !
Another great video Mario . Just goes to show you must do all your prep. The primer and a Sika make a very strong bond. As you say Aluminium and steel should not come into contact. This is where Land Rover dropped the ball years a go with Aluminium door skins on a steel frame.
Thanks 👍
Awesome info!! Thanks again my friend!
Ps. I keep sharing your vids on various forums related to overlanding - I think your videos will help a lot of people!
Awesome, thank you! I appreciate the sharing !
Another great video Mario, as always keep up the good work. Thanks
Thanks, will do!
Well done sir....wish you tested the bond on steel frame with rust primer......cheers
It is a really strong bond, works well.
Sika has some amazing products!! Great videos, please keep making them!!
Glad you like them!
Looking good.
Thanks 👍
Great video!!!!
Thank you !
Great stuff! Thanks.
What about the painted surface, will it stick just as well? The tests were done on metal and not painted metal….
Yes it does but you need to make sure you prep accordingly, means sanding the metal before painting and also sanding ( roughing ) the paint before primer applying and at all times dust and grease free surfaces.
very good
Thank you! Cheers!
Great video, greetings from Australia , love the toothpick idea..was thinking 3.2mm spacers but now i wont have to buy. Will be installing roof top mount solar to aluminium canopy …so plastic frame onto solid solar . The plastic frame onto prepared and sanded chequer plate alloy …thanks again
You are very welcome ! Good luck with your project .
Hallo Oscar, Nice video again. I used this method also on the back of the drivers-cabin and will use it on the habitat also. As you stated: Aluminium on Steel may not have a direct contact with each-other. For the distance between the two materials I took square distance pieces that are used (to keep a constant distance in the edges) when you tile a wall. In fact the function is the same but I don't like any kind of wood in my outer surfaces. Keep on going.....I like to follow you and see you next Friday
Oh...... and can you please keep us posted about the real quantity you've used from the Sika? It will be helpful when I have to order it too 🙂
Thanks . Those tile spacers are a good idea as well.
I will.
Great video that cleared up a lot of stuff in needed to know, i always appreciate experiments and demonstration. Greetings from Poland
About to mount 400w solar panels on top of my 1991 Citroen C25 Burstner with aluminium angular profiles, kind of hesitant to trust only glues without any drilling, this video helps me trust such solution more haha!
If that works well I will have better understanding on how to add split AC unit on the back as well. Vehicle frame sounds like a most reasonable idea, but perhaps supporting it with sikaflex and original bike rack mounts could work instead.
Yes that Sika stuff is amazing if it is right prepped. Check out this 2min video they pulled with 240kg vertical than the composite panel snapped but the sika glue did not let go ! th-cam.com/video/4DxFRq5BvNk/w-d-xo.html
Oscar, thanks for the great video! tell me, you will not use rivets in the fastening of aluminum sheets? Or will you fasten the corners of the van with aluminum corners through rivets?
Thank you. No rivets or screws at all, only glue !
@@oscaroverlander_MB1222AF Oscar, thanks! I understand!
I want to mount sideskirts on my car using Sikaflex 252. Do i have to primer both sides? (Skirt and car)
Hi thanks for the question ! To use 252 Sika flex efficient you should prime always both surfaces, just make sure you use the right primer for the material you are going to use.
@@oscaroverlander_MB1222AFthank you very much!
What is the thickness and type of insulation will you be using?
I will get to that pretty shortly have to finish the cladding first.
I tried this and the adhesive ripped the paint off. Lesson; make sure the paint is stuck to a high grade or it will become the weakest layer.
Absolute right that's why I applied only the primer and sanded before, to make sure the primer doesn't get ripped off.