2-Step Touchless Wash Soap Demo | Cleaning Filthy Farm Truck | No Brushing
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- In this video, we're using our 2-Step Process to clean a farm truck, to show the owner HOW the 2-Step Process works as well as the effectiveness of our detergents. Using the best 2-step truck washing detergents, you can wash and remove road film and dirt with 1 person in less time with less effort than brushing!
Our process greatly reduces labor costs, insurance costs, and equipment wear and tear. It also helps prevent paint damage caused by highly caustic 1-step soaps & the damage caused by brushing the surfaces of the vehicles. The HCS touchless process leaves the vehicles clean, road film-free and the paint with a glossy, shiny look.
Hydro-Chem Systems manufactures the best truck wash soaps and chemicals whether you are using a 2-step brushless system or when you're brushing. Clean your fleet at the lowest cost per wash!
Farm Equipment, Box Trucks, RVs, Garbage Trucks, Heavy Equipment, Tankers, Tractor Trailers, Bobtail etc can ALL be cleaned using our 2-step system no matter what shape or size.
Hydro-Chem Systems Inc
A 100% Employee Owned Company
6605 Broadmoor Ave SE
Caledonia, MI 49316
616-531-6420 | Office
sales@hcsclean.com | Email
www.hydrochems... | Website
What Make Hydro-Chem Systems Unique?
1.) Educational/Consultative Approach
2.) Offering Customized Solutions
3.) Lowest Cost Per Wash/Increased Profitability
He was driving me insane spraying the ground wasting that water
Saw the Chrysler van and I was out. ✌
cuck lord who gives a fuck what brand the van is, that’s not the purpose of the video.
Holy pressure, looks like 4- 5k psi most ppl won't have that, but just that pressure alone will damn near clean the vehicle. If you had chipped paint especially on plastic part it would strip all the paint off. Do this with a 1800 psi unit and we can see a real result for a consumer or detailer.
The pressure washer used in this video was 2500 PSI and 4 GPM.
The higher gpm is probably what your noticing. Makes a significant difference over psi when cleaning vehicles, more gpm at the same or similar psi is what you want to go for
whats the charge for a job like that ?
Question, why does he wash from bottom to top instead of top to bottom?
Because he is pushing the soap up and using it to his advantage to clean the truck
This is the touchless 2 step washing process, a little different than typical washing.
It's usually a low pH presoak done bottom to top - not for cleaning but just applying the acid. Then a high pH detergent bottom to top, again not for cleaning but just covering.
The 2 work together to neutralize the static bond that keeps road film on vehicles.
Then rinse top to bottom, removing the soaps.
In some cases it's top to bottom but specifically for fleets/road film and 2 stepping you want to cover without streaking - which can occur if you start at the top, especially on large vehicles like trucks and tankers.
A video on how to waste water fast
This will leave no film after rinsing?
What are you using to swap from the different chemicals?
We typically recommend using a few different systems. We have a 2 Step remote system, a 2 Step gun system, as well as some 'beginner' systems where you can swap without contaminating chemical storage.
I can see this being great for work vehicles that are super filthy, but i would never do this to my own truck. Pressure washer like that could easily peel or damage clear coat and paint
If ypu hold it far enough its completely safe
Its only 2000 psi pressure when u use this 2 step wash i even use my f250 with 4psi wash nothing is happening with paint
didn't even attempt to spray the underside.
Honestly I don't see why you need soap with a pressure washer that will peal the paint if you get to close!
..this is a soap selling scam lol 😆
Soap removes grime water doesn't
Is that horse hair on top of the screen?
It's the microphone cover peaking over! It has a cover to help with wind noise.
Wasted too much water for nothing