10 Satisfying 3D Print TimeLapses on the Elegoo Neptune 3 PRO 3D Printer
ฝัง
- เผยแพร่เมื่อ 24 พ.ย. 2022
- Here are 10 cool things you should 3D print. Let me know in the comments what you’ve been printing and what you’d like to see printed on the channel. Thanks for watching and happy printing! Check out this ridiculously cheap 3d printer here: bit.ly/3oKdmpq (affiliate link)
MODELS:
Gear Top Container - Designed by ClockSpring3D - www.myminifactory.com/object/...
Pheonix - Designed by FlexiFactory - / posts
Screw Lid Container- Designed by ClockSpring3D - / clockspring3d
Woven Pencil Holder - Designed by JamesThePrinter - www.printables.com/model/2025...
Glasses Case - Designed by ClockSpring3D - / clockspring3d
Skull Container - Designed by ClockSpring3D - / clockspring3d
Fidget Turbine - Designed by ClockSpring3D - / clockspring3d
Pill organizer - Designed by ClockSpring3D - / clockspring3d
Gravity Broom Holder - Designed by LoboCNC - www.printables.com/model/1525...
Switch joycon grip - Designed by ecoiras - www.printables.com/model/5264...
Support ClockSpring3D Here:
www.myminifactory.com/users/C...
/ clockspring3d
cults3d.com/en/users/clockspring
Support FlexiFactory Here:
/ posts
cults3d.com/en/users/FlexiFac...
www.myminifactory.com/users/d...
MUSIC:
Odyssey - jiglr / jiglrmusic
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/3Sed82O
Music promoted by Audio Library • Odyssey - jiglr (No Co...
gloomy by k o f i / xerum-wav
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/3DpGy8v
Music promoted by Audio Library • gloomy - k o f i (No C...
#3dprinting #3dprinter #3d #3Dprinted - บันเทิง
![[Full Episode] Hell's Kitchen Thailand EP.14 | 12 พ.ค. 67](http://i.ytimg.com/vi/MNspIlqlJcc/mqdefault.jpg)
![[LIVE] : ONE ลุมพินี 62 | คู่เอก "มงคลแก้ว vs อีที"](http://i.ytimg.com/vi/q7QuSUtUN94/mqdefault.jpg)
I’m almost 99% sure after watching this that I’m going to pull the trigger and order my first printer. I’ve been intimidated for years but I’m hearing good things about this printer in particular.
You can do it! I started about 6 years ago. I watched videos for a couple weeks and thought, "it would be cool if I could do this," then I just said... "I can do this!"
There is so much support out there to get started.
@@evilparadigm I ordered my first one last night. Got the Elegoo Neptune Pro. I’m pretty excited to receive it!👍
@@TheStudio_70 Just make sure the room is at least room temp. If it's too cold, prints may not stick.
Have fun!
great choice congratz! happy printing! :)
The ender 3 pro is good to start
Awesome prints (not even ONE stringing defect.. haha) and enjoyable timelapses. Also, very nice filaments. Congratulations !
Thankyou so much for the kind words! :)
I love how the first two builds were the ones he showcased in the thumbnail. Love it!
**Just to address some comments here! This IS in fact the Elegoo Neptune 3 PRO 3d printer ( bit.ly/3YSiUL7 ) I've changed the title of the video to reflect this but the baked in ad will still only say Neptune 3. sorry for any confusion! happy printing!
Hoping to get a 3D printer soon. Your work is inspiring thanks for sharing
Thanks for watching! ☺️
so smooth
Most effective ad I’ve ever seen in my life
Hahaha I’ll take that as a compliment
Which nozzle size did you use for those prints ? Those are realy smooth prints 😮
I have just started getting into 3d printing and have been looking at different channels and have found a few interesting ones.
One of my favorite channels and one i recommend to anyone getting into time lapses is a small channel called "Black cat 3d" they are a very new channel and have just started making time lapses of all the different things they make. The channel is super nice when responding to commens and i feel they should have more subscribers and support.
Coś pięknego 🤩 uwielbiam oglądać wasze filmiki :)
the 👑💀is pretty cool ngl
yeah that ones a banger ;)
@@WildRoseBuilds im trying to find the file with the crown can i get a link???
cool prints! I just ordered special filaments.. have to think about what to make of them
Can you share some of your settings? I have the same printer, just getting started, and would like to improve the quality of my prints.
Which filaments did you use for that awesome prints, and where could I buy them? Very nicely video, thanks for your highly production.
Pheonix is so cool!
It is! ☺️
This 3D printer is high quality.
3d printers can make articulating parts?!? I had no idea. That is intense and for a printer at that price. Still on the fence about getting one. Building rc parts would be cool
I'm starting to appreciate elegoo more and more than creality.
Build quality is much better on these machines! I tested the ender 3 max neo a couple months ago and hated every minute of it haha. Thanks for watching!
@WildRoseBuild i think anybody should take ur comment with a grain of salt as they legit are ur sponser so they pay u to say shit like diz
@@SimSummer exactly.
@@SimSummer they dont pay me but i will sing their praise as well my printing experience with enders has been hit or miss and they really aren't that great without mods .. my Neptune 2 was out of the box and printing reliably within minutes i have had it over a year with no mods done it will prints tpu beautifully same experience with my Neptune 3 just better .. great printers from Elegoo
@@SimSummerthis is a valid point. I really recommend doing all your own research before buying a printer as with any consumer decision. But let’s be honest creality is slowly losing its grip on this market as they make countless iterations to their machines. We’ve seen them put out some truly baffling machines so to think that a company with the r&d funds and budget of elegoo making a machine on par with the ender 3 s1 pro isn’t a far stretch! Thanks for watching!
Could you post your prusa slicer configuration for the Neptune 3 pro? Thanks so much!
Bonjour,
Comme toujours, les modèles sont originaux et la mise en image est superbe.
Merci pour ce moment de grâce technologique.
🙏
have any suggestions on how to make my Neptune 3 pro faster?
No sé qué máquina es pero imprime súper bien. Los filamentos son muy bonitos.
Saludos
Looks like a new bed almost every print. That printer must be perfectly tuned too.
what is that filament which is 2 colors?
that is sick. would love to get some
What are you using for time lapse on your printer? I’ve been trying to find a good, trustworthy Timelapse camera for my CR10-V3. Currently I’m using my old iPhone 7 on a goose neck phone mount. But it’s not like it’s the best. It just made sense to use it at the time, seeing as it was that or dispose of the iPhone.
superbe vidéo comme d'habitude , êtes vous satisfait de cette neptune 3 pro ? car elle m’intéresses également ...
what settings do you use for your 3D prints?
Really nice items! I would print it for my kids, could you please share the stl? Thanks!
Awesome print as always... I got one question in comparison of Neptune 3 and anycubic Vyper which You prefer? Any tips which to choose?
thanks! the kobra uses a strain gauge that the hotend is mounted to in order to do bed leveling. i find these to be pretty unreliable. i'd opt for the elegoo neptune 3 pro as it has an inductive sensor for mesh leveling. alternatively the ender 3 s1 has a bl touch which is quite reliable too.
Nice filaments , which one do you use ?
What are your settings I have a elegoo neptune 3 pro but Im having a hard time with the z offset could you recommend me one
The Switch piece at the end could be really useful for Switch users. Now you don’t have to buy a Nintendo accessory item; print your own!
What filament did you use for the Phoenix? It looks so cool!
3D jake magic pla!
Hi! How are you?
In order to make those prints, what kind of filament did you use, and what was the temperature of the nozzle (extruder) and of the heated bed?
Thank you.
Mostly 3D jake pla, at 205c and 65c ;)
Why do you use rectalin fill? Isn't cubic/gyroid strictly better?
Can you recommend pei sheet for an upgrade. Mostly print in petg and a bit of pla and tpu.
Love the vids cheers 🍺
The elegoo pei sheets are good but they’re single sided. You can look into ultistik beds, they’re double sided and I’ve printed every material on them without any glue stick or tape. Highly recommend if you’re using a polycarbonate bed! Thanks for watching!
@@WildRoseBuilds cool thanks I’ll check them out. printing on glass mirror right now but the ease of use in your videos looks so appealing. Keep it up man
@@Norkee83 I’ve never brined on bare glass! It sure looks cool tho. Thanks for the kind words 🙏🏼
neptune 3 is an awesome printer!! prints are amazing and clean!!!! links to files you printed?
Agreed! Links for models are in the description! Some of them are patreon exclusive but for the amount of models and the quality it’s well worth it!
Ola, pode compartilhar as configurçaões do fatiador ?
How do u take videos of the print growing without the extruder and all that showing up? Does it like move out of the way after each layer to take a pic?
Yep! you guessed it. thanks for watching Wayne :)
@@WildRoseBuilds Thanks, I always wondered about that when I saw these videos.
The second one: you printed irl me!
Which slicer are you using? Could you please share your travel settings?
150mm/s travel speeds in prusa slicer :)
what app are you using to make these 3d models?
How deep (in mm) is the elegoo neptune 3 without the y-rail, just from foot to foot?
If I had to guess maybe 280-300mm
What camera do u use for timelapse?
How you make this clean print?
where can i get you print settings? they are just 😌
I recently uploaded a video about tuning! Check that one out!
The smoothness of the prints and effortlessness with which the moving parts fit, as well as the lack of visible stringing are testament to the accuracy and tight tolerances this printer can produce.
And for that price, it looks like quite the bargain.
Yeah! Some parts have a little z wobble but it seems to correspond with my shop heater kicking on. Highly recommend this printer! Thanks for watching :)
Just purchased this 3D printer. What slicer do you recommend? I’m in a 2022 MacBook Pro. Thanks!
Also, fun fact, the Phenix design made me want to order this. Absolutely incredible. Could you do a settings tutorial? No way that’s straight out of the box. Right?
It sure is! I use prusa slicer and there’s a default Neptune 3 profile ;)
@@WildRoseBuilds You responded! Thanks for the tip. Really appreciate the videos. Whole reason I even got interested in 3D printing. Now I just need to figure out what I’m going to print. Lol Take care, and thanks again.
HEy man, What settings did you use? What Slicer? and What GCodes did your Printer use?
.16mm layer height At 210c in prusa slicer with standard marlin gcode! :)
Does your printer also level it self when you start a print? It kinda annoying.
Esperaba tus videos
Hello, you can print random nickname from comments, people writing something under video, you can print his name! 👍😁
hey can you send me a link to the prints?
when I printed it here at home, everything was glued together... without movement. What do I need to regulate?
Check out my latest tuning video and focus on the extruder steps. Sound like you’re over extruding!
Something seems wrong here. How do you print moving parts? Were the moving parts printed separately and then put together? This does not make sense to me. Did he print the parts and then place them together to make it look like he printed it in one shot? Is this a trick? Would the hinges and joints be glued stuck?
Hi! one quick question do you do these prints with octolapse?
yes!
@@WildRoseBuilds Ok thanks for responding!
What model printer you use?
3:10 I can't see the leveling sensor. How do I level this print?
neptune 3 has a strain guage that the hotend is mounted to sensing when the nozzle comes in contact with the bed. neptune 3 pro has an inductive sensor sensing the metal build plate ;)
What printer do u use
I love my Neptune 3. Did you use a custom profile?
It’s a great little machine! Nope just just did a little tuning and the default creality ender 3 v2 profile in prusa slicer! The last video I posted shows how I tune!
whats the top speed?
I thought you need to print each part individually and then put it together. How do you print moving parts? Is this fake? Wounding the moving parts, or hinges get glued or stuck together? There is something about this that makes no sense to me.
there are tons of print in place models the gap is built in so it doesn't fuse. It's pretty amazing stuff.
Wait... You can print a working hinge? How?
What do you use to make timelapses
octolapse!
Why isn’t the head visible in the video?
make conch shell and blow it see if it can make sound like real conch
Cool!
But I want to know how you got the video of the builds to not show the print head, that is really cool!
octolapse!
How does it print like that it’s just rising from the table
this is a timelapse where the print head moves out of the way for a picture!
I love my Neptune 3 so much I bought another one!
they're great little machines! thanks for watching!
What speed did you print these at?
60mm/s :)
Your print accuracy makes me mad. You're just showing off at this point 😆
:)
멋진 세상이다!~ㅎㅎ
Is the bed a PEI sheet?
Pei Powder coated spring steel sheet!
Anyone know what slicer the person might be using
prusa slicer! highly recommend
@@WildRoseBuilds do you have any recommendations on how to set up prusa slicer?
@@aodgh0str1der21 the setup wizard lets you import Neptune profiles and ender 3 profiles!
Clearly this is a Neptune 3 PRO and not a Neptune 3, the quality between the 2 is night and day without some significant modification to the base 3.
yep its the pro, i've changed the title of the video to reflect this!
3D printer: I can make a joy con grip for your switch so you could make one whenever you want!
Mfs who play Fortnite: how much can it make?!
Phoenix wings should be foldable like a bird
Harmony
ok that skull container is actually amazing, hot damn.
It's also nice to see some proper competition to the CR6 SE from Creality - it launched just about 2-2.5 years ago offering similar features and insanely high reliability/performance for about 350, but with Elegoo knocking the price down to about 3/5ths and only losing a few features (like the super rigid dual Z-axis setup), this thing seems like a killer deal and I can't wait to see Creality's response.
The CR6 SE was already a Prusa killer, and now with the Neptune being a Creality killer, who knows what's next! Things just keep getting better for the consumer :)
BambuLab seems to be disrupting all of this as well. I think the ender 3 s1 was crealitys response to better machines. The pro version of the Neptune 3 has dual z lead screws and mesh bed leveling putting it’s feature list on par with the s1. Excited to see this space evolve! Thanks for watching :)
@@WildRoseBuilds And thanks to you for sharing! The Neptune Pro definitely is what I'd call a disruptive printer (BambuLab's Carbon X1 is over 6x the cost currently)
I know Anycubic has some FDM units as well so I'd like to get a few of those next year and do a big comparison, but for now, Bambu is simply too far out of the budget even for an average 3D printing enthusiast, let alone a beginner, to consider them anything more than a cute idea
@@StormBurnX the recently announced bambulab p1p is 600 I believe! Cheaper than an mk3s kit. But I agree anything over $500 is mid range budget. The anycubic kobra series is comparable but their use of strain gauges for z end stop and mesh leveling is unreliable unfortunately.
@@WildRoseBuilds That's sad to hear about the unreliable strain gauges; that's honestly my favorite part about Creality's CR6. I'm not fond of the probe ABLs and the inductive ones on my older Prusa seem to throw a fit whenever I change the bed material or thickness, I gave up troubleshooting it a long time ago and donated it to a friend. Hadn't heard about the P1P, it looks interesting! Definitely going to be keeping an eye on BambuLab this upcoming year.
@@StormBurnX I should have a bambulab P1P video soon. Stay tuned!
0:44 really thought number 2 was a lobster 🦞 not a Phoenix
lmao :) thanks for watching
3d printed claws
filament name ?
3d jake magic pla
I wonder if lego can be 3d printed?
You can clearly see at 0:46 that this printer is the Neptune 3 PRO not the 3. Y u lie bro. In fact it seems all prints were done on the pro.
yep its the pro, changed the title to reflect this!
Where the hell you got this freaking music.....
I spend a long long time looking for good royalty free music. ☺️
I like your honest moment there. Under stipulation for receiving sponsorship in some form, forced to show a commercial for elegoo, and receipt their monolog, at the moment you said how great the quality was, one of the worst overhangs is scrolling upward on the video.
That overhang well exceeds 45 degrees. Safe to say I chose the wrong clip to show off print quality but The rest of the video speaks to the quality of prints. Thanks for watching!
@@WildRoseBuilds I have a neptune 2s, and in fairness the product provided for the price is exceptional. It is also one of the easiest printers to mod
This is not an Elegoo Neptune 3. It's the Elegoo Neptune 3 Pro..
yep! changed the title to reflect this!
Was gonna get the Neptune, but their customer service and logistics is bad so I went with Bambu lab.
fair enough!
Tu intresting
All I see is boxes
Hi I’m kj’s sister
Omg
Всё больше убеждаюсь, что 3Д принтер особо и не нужен, ну или не в те руки попал...
Устройство с большими возможностями печатает игрушечную урну...
Elegoo sucks when things go wrong. My Neptune was a POS from day one. They sent replacement parts but there where soo many things wrong and when I found the last one ( bed massive warped) they said they dont have beds for that anymore so buy a new printer.
Imagine not using cubic infill... Nah jk use what you want
Lmao! did I miss the memo about cubic? I’m a grid boy for life! Thanks for watching :)
Nice but slow printing.
Tanta tecnología para crear objetos banales y ridiculos para entrenar al TH-cam jejejje
Tell me please. This is urgent
Ich nicht
Из разряда, сколько бесполезной херни можно напечатать, когда денег некуда потратить...
How many useless nick nacks can one print. Lol
lots :)
Patreon 👎