Rod Storage Rack ( for your boat )
ฝัง
- เผยแพร่เมื่อ 16 ก.ย. 2024
- Arod storage rack for your boat is todays DIY build , it mounts in a seat mount and is very handy. as always I appreciate you watching and don't forget to subscribe for more DIYs
For Fishin N Stuff gear vist the Link below
T Shirts
Decals
Glasses
www.etsy.com/s...
I agree with you about using steel for projects, it is structurally stronger and easier for the average guy to weld without expensive equipment.
Thank you buddy , every material had its advantages
The King of DIY’s 🤴 ! That rod holder looks great 👍.
Thank you Sir , I don't know about the King though lol . I appreciate it brother
Pure genius, you are very talented and your videos are incredible
Thank you Sir , I really appreciate that
Thats purdy! I like that!
Hehe it is man its purdy lol . You going to CatCom again this Year
@@FishinNStuff yes sir I'll be there.
Another great idea! A little tip I do when fastening aluminum to steel like this, put a little bead of silicone in between them before riveting/screwing them together. Seals the steel to prevent moisture from getting in between them and keeps them from vibrating and making noise.
Your right , I don't think itll ever vibrate it's so tight but I should have painted both pieces before putting then together for corrosion purposes but I'm always on a dead line , between work and TH-cam I stay pretty much slammed. Plus I building keep my boat . I'll be fine . I'll probably be building something more awesome soon that's how TH-cam works lol I'm jk . I do build a lot of stuff for videos though lol
That and dissimilar metals touching each other will eventually start corroding. I think he's going to have issues with that unpainted steel in a year or two. If he is anywhere near salt water, it'll corrode rapidly.
GREAT LOOKING ROD RACK. GREAT DAY TO BE FISHING HERE IN TEXAS !!!!!
Thank you brother
Love it! Keep us updated on how this holds up, especially the aluminum to steel connection. To me it may be worth just re-riveting once that connection corrodes
Greg Anderson what if you would use stainless rivets
@@crazylewiemike stainless corrodes just as bad . When you have 2 different metals touching you should put anti seeze between the 2
Up dates won't fo much good . My boats garage kept so I know itll be ok . I made it sho it could be removable. I'm sure itll last a long long time if you take it off your boat before covering it or just leaving it out side . I've built Simi trucks and made parts diiter em for years I know just a little bit about . Plus they made out of steel too lol . Buy I will keep you up dated about it
@@crazylewiemike 3m vhb double sided tape would hold well and provide that isolation too
This rod holder is sweet !!!
Thank you Sir
Good set up
Thank you brother
What great weekend project. Keepem coming nice can't wait to get started on mine. 👍👍👍
Hey send me a picture when your done buddy keiff32@hotmail.com I would love to see it
Very nice! Im making one
You'll love it brother
Awesome build. That turned out pretty sweet
Thank you Sir
That's awesome ! I love your videos! I'm from NC
Thank you
Thanks again brother , I appreciate it ,great job I'll be making one when the weather gets warm for my boat .
Thank you Sir , I should I really like it
I want 1 and I want it Now. I've seen another one build and I like yours a Lot more. Man you never cease to Amaze. Keep the videos coming Brother.
Thank you Sir , it turned out nice
Awesome build. Looking forward to seeing more videos. Got my materials to build my anchors. Thanks for the how to videos.
Thank you Sir and thanks for watching brother
Your very welcome
another job well done. thanks and keep it coming
Thank you Sir
Another great DIY. Thank You.
Thank you brother and thank you for watching I appreciate it
That is super nice, Keith!
Thank you Sir
Top notch job on this one Keith, will definitely add this one to my round tu it list,
Thank you, Jerry I like your channel name lol
Just made one of your crappie lights, this will probably be next. Thanks for the videos.
That's awesome , vid you Email me a pic I'd love ti see it keiff32@hotmail.com
Awesome diy. I don't even have a boat and I still enjoyed it. Great video my friend
I appreciate you watching especially being you don't own a boat
Dang now I wish I had spot for one of those. Very useful and looks good to!!!!
Thank you Glenn, I wish I had all that room you got in the back of your boat and I wouldn't need it lol
I like that a lot. Another great DIY
Thank you buddy
I get it. You are doing good with your channel. Best wishes!
Thank you Sir
You make these projects look easy brother 😀. Came out wicked kool 👊😎🎣
Thank you man , and you always figure out a way to blow up my Ego hahaha . And you know I appreciate it every time lol
Another great video as always keep them coming
Thank you Sir
wow. That looks really good.. great work
Thank you Sir , and thanks for watching
I like this !! Thanks again my friend for Sharing you the man!!!
Thank you Sir
Great videos rod holders looks sick
Thank you Sir
Another awesome job
Thank you brother
Great idea. I may coy it & use on my center console. Thanks
I think you'll like it man
Very nice ! Will be going back to catch up on your other projects !
Thank you Sir I appreciate it
That came out amazing
Thank you Sir
I wish I thought of that I am always looking for places to hold rods I don't like drilling holes in my boat I try to use the versatrac to mount things but some stuff doesn't mount good keep up with the good ideas it gives me other ideas for my boat
Thank you brother , I do the samething I watch a video and say ( that gives me an idea ) lol
Heck yeah brother, that is awesome.
Thank you Mike
I need a shop like yours and I would do everything you've posted. Jam up DIY's!
I do love my shop but I was making stuff on my back porch for years and did pretty good . But I can't deny having a shop's nice wish i would have got one when i was younger lol
@@FishinNStuff Today I just bought the 16' LED's and battery clips from Amazon for the crappie lights. I live in Chattanooga and I think I can slaughter some slabs with those lights on Chackamauga. My buddy helped me do new boards and carpet on my trailer so I'm gonna make another light for him for helping me.
@@christopherbitton5113 he will like that , I gave the light I made on the video too my buddy , he helps me a lot he's the one welding on my leaning post modification video
@@FishinNStuff I just told him about it. He's stoked! I'll post a picture when I'm done.
Nice job, looks great. Keep up the good work buddy.
Thank you Sir
Looks like it should work real well. I'm always paranoid someone will come steal one of my rods as I sit at a stoplight or something. Mine go in the car. Poor Russ has to deal with them when he comes along because I run them between the seats and right across his lap.😂👍💯
Haha poor Russ . Hey there's nothing wrong with that Bill . But I actually built this because I like to have some where toi store my rods on the boat do I don't have to lay em in the foot
Man oh man what a wonderful idea I try to make a single side rack like this for my boat to get ride of the one I have now and I will get the class kids to participate in the making l will make it with 90 degrees connection and use screws to hold together
That's awesome man what kind of class do you teach
That turned out really nice man , im ganna have to make myself one for my boat , thanks for the great video
Yes Sir , it turned out great
And I appreciate you watching brother
I mounted pedestal bases on the face of my boat bench seats so when I travel I can pull them out and they have a place to be stored. Same could be done for the pole holder so they are laying instead of sticking up for travel on the highway. Also the tarp could be placed over the boat with the poles still in.
That's a good idea man . That would be nice
Another great project brother! 👍🏼
Thank you Sir
NICE!! I'LL TAKE ONE!!
I don't sale em lol . But it is nice
Weld a nut to the frame for your mounting screws, that way you eliminate the possibility of water intrusion into the frame through the holes you drilled. You could also slide a bolt through the frame holes and weld it on both sides, but the nut option is less work and you can easily grind off the nut to replace it in the future.
Your right that would work , but it rusting a little on the side won't hurt nothing ,,,ill build another one better any way lol jk . I build a lot of stuff . But seriously I see steel last outside for years , going and shopping at scrapyards and its like the rust coating that fiend on it protects it because it lays out in the elements for years and don't rust away . Plus it fish fresh water , don't care much for the rain and my boats building kept . But don't get me wrong your way would be superior
Thanks for the video!
Thank you for watching
Great video !!
Thank you Sir
If you offset the hights you can get them closer so your reels don't hit and it comes smaller which =less room
Yep you can do that , and its actually a good idea
FIrst view? That never happened before. Really enjoy your work and look forward to the next one.
Thank you Sir
GOOD BILD ,,, I LIKE IT.!!!!!!!!!!!!
Thank you brother
Thats nice! I need that..
Thank you brother, I needed it too lol
Very Nice!!!
Thank you
Wow, once agin you have came through with an awesome $ saving idea!
Keep up the good work. Heck you are about to make me come out of retirement and build some stuff! 😉
You need to come on out of it lol , I bought my building because I was preparing for retirement .
Fishin N Stuff I do like your brightly lit building. It makes work on projects much easier. I am converting my shop (48x72) over to all led lights
Another Great FNS DIY!!! Hopefully any galvanic (dissimilar metal) corrosion that develops will be years and years down the road! :-)
It will be if you just take it back off when you get home . My boats building kept , the only thing that gets on my boat is dust from all the DIYs I build lol
Cool,,Looking to make One Something Like That Soon!!
I think you should , I really like it
Man I gotta get a cheap welder.... Great job!
Cheap welders work really good nowadays
Awesome build Brother...! My neighbor says I'm a genius because I make a lot of the stuff that you base your videos on, and people ask me where I get them and the idea for them. I told him that I know a certain little Engineer who designs all this, and now he wants to build some fishing stuff, too. Lol. Good luck fishing and "Tight Lines " Brother...!
Hey thank you for watching and most of all thanks for your support and telling other people about it
@@FishinNStuff Yes, Sir. Thank you.
Awsome job, looks great. That is a lot of rods. You should be able to catch at a fish any time with that many options. BTW, I bet Angus would be proud if he caught that! . Might even strip an origional lick for your channel . I have seen them live in the 90's and they put on a crazy show, good times. I also noticed a lot of new channels popping up using your same sound track Well eveytime I hear that I jump off what I am watching and think to myself, "That reminds me, what's Fishin n Stuff up too?" and I end up here instead of watching what they were doing. Sucks for them, but better stuff going on here anyways.
Haha thank you man , I try and be original , but that's just the way TH-cam works ppl copying I mean . I'm just me lol crazy !!! But me . I appreciate all your support man
Ol and by the way who's Angus ?
@@FishinNStuff 😳 uh, Angus Young AC/DC lead guitar.
Want an idea for Version 2? I used cutting boards from Amazon where they have a variety of sizes and colors...even green! Drill 1 1/2" to 2" holes in both boards around the perimeter for rods, add smaller holes on top for pliers, slit for a knife, etc. Then just space the boards according to your shortest rod butt (I used 4 8' pieces of aluminum I had laying around) and mount to a seat pedestal. And when all your rods are out you can even use it as.......a cutting board! On my version, instead of regular holes on the back corners, I dropped in 2 30 degrees rod holders just to make the DIY a little sweeter.
Ive seen those and was thinking about doing one of em , I seen someone selling em . And thru look pretty easy . I appreciate all the help you can suggest buddy send me a picture of your build and cill give you credit . Keiff32@hotmail.com
@@FishinNStuff Email sent...look forward to seeing your version!
Awesome build, for those of us without the tools you use, it could also be built out of PVC and slipped down over the pedestal. Keep up the great videos!!!
Your right I can be . And itll be on my next DIY brother
Man, don’t know how I missed this one! Must of been that pesky job interfering with my youtube’n time again lol!😂 Here now though, good stuff brother... love it!👍👍👊
Yeah then jobs mess everything up lol . Thank you brother
Fishin N Stuff right!
Damm boss that was awsome thank you
Thank you Sir , I appreciate it brother
Brilliant. Another master class on how its done. Has NASA phoned you yet?
No Sir didn't Obama shut down our NASA program haha just saying lol
@@FishinNStuff
If you were the head man there it would be still open running at a profit.🚀💰😉
Show off your boat a little more. That rig looks awesome!
I was thinking about ding a review on it when it warms up . I wanted to get done hours on so I can be fair and more accurate. I bought it last summer
I done the same thing.chad ferguson came up with it several yrs ago
They eas selling em a long time ago , I just made one for the ppl that can't weld Aluminum, I saw Chad's video too he used 6 on each side . It was pretty dang cool
@@FishinNStuff I done mine like yours.
You. Should do. Some kind of rod holder for Reece hitch for those of us with a SUV
Thanks and that's a great idea . I've thinking about making a fishing station that gos in a hitch . But the only problem with that is most ppl cant pull the vehicle to the waters edge . But a SUV RodRack would be cool
👍🏼
It takes a lot of effort to hit 👎 on this obviously great vid. But for that one 💩 head who did, you’re the biggest fan!!! Thank you for sharing brother!
Lol I always get some lol . They say your a no body till you have haters right lol
Hey that is a clever idea, I can't imagine a thumbs down on that, I like it, so I had to subscribe, thanks from Gene Cooksey woodworking
Thank you brother, you know how ppl are lol . I appreciate it by the way
Love your videos but hate the music which is distracting. You are very creative and resourceful.
I'm sorry man , and I appreciate it too . Is it too loud or do you just hate it in general lol
I realize that I may be in the minority. God bless you.
@@MrIndyjoe I was serious buddy , is it the music in general or is it too loud or the wrong type music . I really want too know . I listen man . I don't have it all figured out lol I wasnt trying too be rude that's just how I learn , I ask questions you know
No I didn't want you to think I was being too critical either as I have great respect for someone like you who takes their time to share their talent and insight with others. That is a very noble thing and I hate it when people go full-on negative to someone who is doing their very best. So when answering your question I just think it is more enjoyable for a viewer like me without music at all or if there is music it is played low in the background so that you are the focal point of the video not the music which can overpower the presentation. That is just my opinion and everyone may not agree with that and I respect that. But I do watch a lot of videos especially in regards to fishing and I hear others making that same comment, as most fishermen really respect nature and find peace in our pursuit. Keep up the good work!
@@MrIndyjoe hey I didnt take it negative at all buddy because you didn't come off that way . I like too hear ppls opinion. I just use music when saws are running and stuff mostly out at least that's why I started it . My cold cut saw is so loud I have to wear earplugs when using it . Its not the saw really its the cutting of the metal that's loud but I've seen ppl . Not user any music just leave the sound of the tools in it . I've thought about doing that but I've normally got music playing when I'm working any ways lol . Trust me I've had plenty of haters on here . You really can't grow on TH-cam without getting done haters but I didn't take your comment that way at all . I appreciate your feedback and i thank you for watching too
Hey could you do some more kayak DIY videos
I'll be making some more soon
Can you do a DIY backpack with rod holders
I'll try , never seem one though
Just built this cost me a lot more because steel is really up in price right now mod ed the plan so I could put my plaino phantom pro in the center with rods all around it mine holds 12 rods
That sounds really kool
Sunday school class for teens with family problems that I am trying to get them into fishing and off I-phones .
That is soooooo awesome , I love it . Please keep me informed on how its going. Where are you at . I mean what state you in
love watching you make stuff , but what if you don't have access to a welder ? I would like to try and make some of them but I don't have a welder or a way to get things welded .
I'm making another one on my next video out of PVC . Check it out . Not sure what its going to turn out like
It would be great if it had a carry handle so a guy could carry his rods into motel rooms during tournaments
That's a good idea , but it would need to lean like on a set of hand trucks kinda. Because most guys use 7 ' riffs and getting them through doorways would be hard
Maybe put a handle on its side so we could carry them flat.i dont know just a thought
@@crazylewiemike Like the handle on a squad automatic weapon at a slight angle ,tips up and carry it around butts first,, I got to build one .
Hey, I've seen this video a few times now, and I'm in the middle of building it, but it just occurred to me that the seat base swivels, how did you stop the swiveling? I was thinking a pin kind of solution.
That is frkn awesome. Only if I had a boat. Dont think that would fit on my bonafide ss127. Lol . Do you sell the decals. Thanks for another awesome video.
I have some stickers , different sizes
www.etsy.com/shop/PebsPrettyfuls?ref=search_shop_redirect
That's the link
👍
My husband and I love your videos! I'm not into fishing (yet), but my husband was always fishing. He has not been able to walk for over 4 years, but he is very much looking forward to getting well and going fishing again and he would love one of the rod holders. My plan is to build one for him as a surprise, however, since I don't normally do these things I got a little confused. Would you be able to provide the measurements for all the pieces that you cut?
I made my measurements according too the rodhold . Sense there's so many different brands of rodholders you could use the measurements might change but I can give you mine if you want , and I really appreciate you and your husband watching . And I was wondering can you weld ?
@@FishinNStuff I'd love to have your measurements that would be great- thank you! No, I'm not able to weld, I don't have the place or the equipment, but I might be able to get one of my husband's friends to weld something.
@@artistdla I'll get em for you . I'm going to make another one like it on my next video made out of PVC
@@FishinNStuff Can I have the measurements for the rod holder you made from PVC pipe that you spray painted black?
@@FishinNStuff Thank you so much! Can I also have the measurements for the rod holder you made from PVC that you spray painted black? That goes by kind of fast and I don't want to mess it up- I plan to make 2 of those for my husband. What kind of glue did you use for the end caps?
I like your vids bro , but not everyone has a weilder and stuff . Can you do it with PVC pipe ?
I'll be post that video Sunday , I'm working on it brother
What’s the length and width of the frame your rod rack in the boat?
I made mine to fit the Rodholders I ought length wise and about 4 inches wide , the height was determined by the Rodholders as well
does it turns when you are driving across the lake or does it stay in place?
Well it depends on what kind of pole you use . Some poles screw in and you could make that type not turn . But some dont they just drop in the hole
I made one close to this but there’s a major flaw in it. Hope you don’t learn the way I did with mine.
Do you mean it lean too the side or what ?
I screwed my plastic holders to my metal frame one day I was on the highway and noticed on side was leaning over. I pulled off the highway and saw that the plastic had broken where the screws go. From the resistance the poles in the air while driving.
I se what your saying . That holder I bought is pretty strong . They were 55 dollars a piece but I hit an open box deal . Hopefully it will last
Fishin N Stuff I got mine from bass pro on clearance. Each one holds 5 rods. But after mine failed. I used some big ass metal hose clamps to keep it tight. Works now pretty well
How can I get some stickers. My 6yo loves to watch your videos with me and he always says he wants a sticker to put on his ( my ) truck lol
In the description box under every video there's a link
www.etsy.com/shop/PebsPrettyfuls?ref=search_shop_redirect
What are those flush mount seat pedistals called and we’re can you get the
www.amazon.com/dp/B0019LY8D4/ref=cm_sw_r_u_apa_glc_fabc_PEFKN9GFMDXCRBYQ4CAD
Now there is no room to fish.
It's for ppl that troll , or Catfish . Everyone doesn't use the front deck all the time
What size square tubing is that
Its 1/2 "
@@FishinNStuff thanks
@@darrendavis3410 yes Sir
Where did you get the rod holder? Manufacturer?
I can't find them . I bought it off Amazon , but they weren't cheap . The ones I used were 52.00 and they were used like new . I'm thinking the used ones were 70 bucks . Having said that , they were made really good. If i had it to do over today . I'd use these and build it little differently . They wasn't available when I made that one . Plus they are Aluminum and cheaper
Wall-Mounted Aluminium Fishing Rod Rack, 4 Link Tubes Fishing Rod Holder for Marine Boat Yacht Camper RV (Holds 4 Rods) a.co/d/b7N2zst
@@FishinNStuff thank you
Why did you decide 4” wide and cut your seat pedestal?
Its assume my frind how we can order from on line my frind through PayPal pls
No Sir I don't sell the stuff I build , they are just DIYs to show ppl how too fo it . The only things I sell is in the description box under fishin n stuff gear , I'm sorry
Should of used Titanium
Haha yep
Very Ingenious Keith. Looks like it jus came off the assembly line👍
Great job my friend!
And to the anal ones, y'all jus grab yourselves a coloring book, crayons and a teddy bear and head to your safe spaces! 🤪🤣🤣
Love it my brother and keep up the great work!!! 👍Jay👍
Hahaha , thank you brother. Don't get me wrong this build would be even nicer made from Aluminum but I try to help ppl . I can't keep em all simple but I try