That is an awesome piece of work Keith. Love the videos. The aluminium when you polish it is as shiny as 316. Up there with the adjustable rod holders as pieces of art :)
Clicked on the video by mistake and before I could change it...ya hooked me! Great stuff. Just got myself a canoe and am looking forward to doing some of these DIY projects!
Another great DIY, I have a bay boat and what I did was brought four 15 degree rod holders and put them in the back of my boat. Now I can make the ones for my cleats thanks to you. Keep these great DIY’s coming, just love watching your DIY’s.
Ta day I watched your rod holder video and loved it. You are awesome, I have a brother in law who is a DIY fanatic also , I've in lighten him on onto your channel. I can not wait to finish my 20 x 25 garage so come spring I can get started DIY ing only thing I would have done different would be leaving the cap bolts long so thieves would need to work for it. And get a beating if I catch them 5 finger discount shopping off my boat. Or a little solder on the lower threads after the nut is tightened up. Love your ideas , keep up the great work 👍 👍 🇨🇦
Man I really appreciate your comment, and I love hearing how ppl would change stuff , some ppl even Email picture and I love it . Because I always safty its not about the finished product it's about the idea . We all make the same stuff for the most part . Bur we have our own ideas and that's the great part . I appreciate you watching brother and for telling other ppl about the channel thank you Sir
Absolutely an awesome idea. You never cease to amaze me with the way you come up with solutions to everyday fishing problems. Keep the great videos coming !!!!!! Thanks for sharing your great ideas.
This is about the 10th video I've watched of yours. What I've watched spanned over the last few years, nothing in particular. I just wanted to say that I find you to be funny, entertaining, and surprisingly smart! I really enjoy your videos. The one about the planar boards is when I realized you're a lot more than what you appear on the surface. Keep up the great DIYs - they're awesome! 😃
Thank you I appreciate it . I think most people ( at first impression ) probably thinks I'm loony lol . But I don't care . I would rather have fun and make someone smile . I appreciate it
Cool idea! You can cut sheet aluminum on your tablesaw with a carbide tipped 24-28 tooth blade. Use a spray of WD-40, a push block and a slow feed rate. Hearing protection and a face shield are a MUST!
Thank you for the quick response and I will be anxiously awaiting bud! Speck season in central Florida does not start till it starts getting colder in November! Thank you in advance.
@@FishinNStuff well you keep it up old man coming from a old man my self or almost old my bones say so. Lol belive me if I lived closer I can work anymore make good money but ide try to get you to help rig my boat up. Or atlest my wheel chair I only got one rod holder left the other fell off. But I did add 2 pipes on the back that I add another piece holds 7 rods or 6 rods and umbrella got to stay cool. Lol. But I've been racking my brain I want difrent rod holders on front one on each side but I want to add piece so I can have a table top cutting board that can be added and moved out the way for days can't get up and walk alot. And I have them days. Even have days I roll my chair into the water over my lap and fish so need a table top so keep bait with me. Already got floating fish basket and I have used tote addy baits tools and it floats by me but wanting to make one better with lid something only 9in deep not big. But yea I love to fish and I no there's gonna be a day I'm stuck in my chair and can't get out so I want to be ready. But got to figure it out cheap. And yes I've thought about new seat so if I got to go well added bucket underneath. Lol. Jk am I. Lol. But yea thanks for your knowledge cause that build any boat can have it's nice. I'll deff be sharing.
Dang right my friend, Keith I truly want to just come hang out and fabricate and build stuff. I’ve always enjoyed designing and building all kind of things but never really had a home shop with all the tools to do some of the things I wanted to do. Keith,congratulations on another great video and thanks for sharing it with us. Congratulations on your channel taking off. I’ll give you a yell because I would like to get you to come help me figure out some things I’m doing to the Patriot Kat Pontoon. Thanks again for sharing this great informational video.🇺🇸
No I do not, I figure the music is on the list of Royalty free music that is allowed by youtube. But if you get sucked into watching Pauk Harrel, which isnt a bad thing, that's the only tune he uses. I'm working on building a home shop but it will take time of course. The press/break would be a good edition.
@@icarusburning2208 i love that little break . Its not as good as a really press break but its handy . I was just checking buddy I was going to check out your Chanel , that's why I asked . You should make some about making a home office 😀
Very cool man, when I seen the U bolt around the cleat, GENUIS, I DIY a bunch of gear to my kayak, might be using this idea too as well, just on a smaller scale, great job
@@FishinNStuff your welcome ,I got a little TH-cam page myself, no handle yet, put a few videos up there once in a while, got one of my DIY pontoons I built for my kayak on there
great vids ..... just a suggestion...... you need to research and make some shallow water spike anchors that everyone can build ...... need the mount also for the front and back of the boat. I have a hurricane that is rigged for my handicap buddy to get on and off with his wheelchair and we go speck fishing. All I’m lacking is front and back anchor system without a rope. So you think you can help. Thanks. Keep it up. I know you can do it.
I try and stay a couple videos ahead , what I mean is buying materials and ideas . But yeah I'll be thinking in that and see what I can muster up buddy
I built mine similar to yours, except i cut that thick aluminum with a cutting wheel on my 4-1/2" angle grinder - it cut through it pretty good. great design.
Thank you , I had trouble with the angle grinder before I used the jigsaw lolol angle grinder tried too kill me haha . The problem was I bought hardened Aluminum,,,,, don't do that lol . I didn't realize it was . I already ruined my cold cut saw blade cutting hardened steel on that rod holder video 😁 ol well you live and you learn . I'd like to see it man keiff32@hotmail.com send me a pic
Fantastic build, definitely like that better than the ones they sell with only 2. My friend bought some for his new skiff, they're pricey too. Fantastic video
Nice man! That turned out slick! I like it a lot. I understand the pain of drilling holes in a brand new boat. It's scary. Your builds are awesome and cheap to make. Looks fun to make as well.
Looks bullet proof! I sure am glad there is people like you that has the skills and tools to do this type stuff. I don’t know even if I had all the tools you have to do what you do. Maybe some of the less complicated stuff I would maybe attempt. I will say this you have to have a lot of “ patience“ not counting the engineering skills witch I lack in both. I do love watching you do your thing though. What a awesome channel!
Thank you brother , but I think you can do it . 6 years ago I knew absolutely nothing about TH-cam but I decided to try and make a video and it absolutely stunk lol . But I hit better ever time I tried again . Everything in life works that way . I think you can do it buddy
That was pretty awesome, Keith!!! I can see where it could come in handy if you borrowed someone's boat and needed extra rod holders!!! I might have to see about making a couple of these for the new boat to go up on the bow if I had a guest angler that wanted to fish up front!! Appreciate it brother!!!!
I love this! I just bought a new boat. Alumacraft Competitor 185 that I will be picking up in the Spring. I am getting ideas to outfit the boat and this is fantastic! I have been checking out your channel for awhile and keep learning. Thank you!
I have to say I have no intrest in rod holders or making a rod holder but I have to say you make your videos so intresting I watch them from start to finish and find them very very enjoyable. Your a very intresting and very smart man. Another great video.
I feel the same way about you , the way you tie flys , can play anything on a guitar , you ever watch Marlin baits , I bet you could do that but with flys and then fish with em at the end , it could work for you
awesome idea brother! I will be building some this weekend, I like this better than any I've seen so far. I get mad at myself for not thinking of stuff like this myself lol. good job man, thanks for sharing. now I gotta find some scrap aluminum.
It turned out nice , I had an idea for a kayak rodholder mount that's removable but I've never made the video , the problem is my ideas for a hobie outback and not every one has one but I think it could work for most yaks
Fishin N Stuff yeah it wouldn’t have worked my yak. I have a Future Beach Mariner sit-in. I mounted a cleat up between the the cup holder and cockpit. That mount would work good right there.
By the way I enjoy your videos too . I fish for Striper too though I'm not the best , but I enjoyed your video about how to wash your boat thre easy way lol
Hey brother, I like to see an innovator bring his ideas to life. My friend that was EXCELLENT craftsmanship!!! I noticed you're a North Carolinian, so am i, Cabarrus county area. Great job Keith! I don't know why you don't already have over a million subscribers! ☆Jay☆.
Thank you Jay , heck we practically neighbor's man , the channels been doing good , it's hard getting found on TH-cam. Man I really appreciate the encouragement and you watching brother
@@FishinNStuff 😃neighbors? Don't scare me like that brother😁. You do look kinda familiar to me. I deleted facebook back in November last year and and don't do Instagram or Twitter so I wouldn't have any way to communicate with ya other than TH-cam, sorry brother. You keep up the great work your doing and I'll keep smashin that like button!😀👌👍👍
You can do it , getting started is the hardest part . I have the same problem every week, I have a list of ideas and I plans half the week trying to figure out the ones im really for . Just get started and itll work itself out
Top notch right there..... Bro your channel had taken off like a rocket and I understand why with these awesome how too's your doing..... Stay at it....
Hey thanks for responding so quickly. Oh yeah, this is a fantastic rod holder, great idea! Not exactly what I was getting at, I'll design something. But this is way cool
Once you have that cleat mount anything is possible. I've been thinking of how to make a downrigger, rod holder system across the aft, you just finalized that. Thanks
Well hot Damm. I just purchased a 2012- 215 DC Cobia and the thing has a giant live bait well. An older Garmin and Lowance that's pinot to bad but I feel an upgrade coming. BUT I digress....It's a 21ft boat. It is freaking me out that it only has 2 rod holders on the whole boat so I've looking for others way to put a few other sticks into action. I bet they cost AT least a Benjamin. But MY MACGYVER YOU MAY HAVE JUST GIVEN A SOLUTION THATS FUNCTIONAL.
I have to say. I've watched a couple of your videos and honestly because of you accent, it makes you sound shall we say not as intelligent. But this was a very well thought out "homemade" rod holder. I apologize if this insults you. Not meant as an insult at all. Rather a pat on the back for a very good idea that i am now thinking of using myself.
just found your channel and absolutley love it! ive watched just about all your vids plus got on the facebook page! great job dude keep it up, love me diy's and saving money, shout out from northern ontario canada!!!
Dude; regular skill saw cuts any aluminum like butter,,,,ear plugs and eye pro,,,for aluminum square/round tubing use miter saw,,,,table saw will make perfect flat stock cuts as well,,,,,epic cuts
That is an awesome piece of work Keith. Love the videos. The aluminium when you polish it is as shiny as 316. Up there with the adjustable rod holders as pieces of art :)
Thank you brother , I live polished Aluminum lol thank you for the awesome comment brother
How did you polish it that smooth?
That has to be the most common-sense thing that I have ever seen!!!!! Thank you for the IDEAS!!!!!
Thank you
I think that's one of the best DIY rod holders I've seen in a long time
Thank you Sir
a fish will never know its crooked and dern sure wont care ! Great job !
Haha it turned out pretty good . I'm just really picky lol . It was stronger than I could have hoped for . I appreciate brother
Extraordinarily beautiful. You should patten that idea for real.
Clicked on the video by mistake and before I could change it...ya hooked me! Great stuff. Just got myself a canoe and am looking forward to doing some of these DIY projects!
Thanks awesome brother what kind of canoe did you get
@@FishinNStuff I picked up a Mad River Adventure 14. Already made stabilizers for it out of an old canopy frame.
Another great DIY, I have a bay boat and what I did was brought four 15 degree rod holders and put them in the back of my boat. Now I can make the ones for my cleats thanks to you. Keep these great DIY’s coming, just love watching your DIY’s.
Ol man that means more than you know to me , it turned out pretty good I could see it being a great no hole solution
Just found your channel and I'm a DYI'er too and all I can say is you're AWESOME!
Ol man thank you so much I appreciate that
Fantastic job on the creek Mount rod holders couldn't have done it better myself I think you're fantastic person for making it
Thank you , I appreciate that buddy
Ta day I watched your rod holder video and loved it. You are awesome, I have a brother in law who is a DIY fanatic also , I've in lighten him on onto your channel. I can not wait to finish my 20 x 25 garage so come spring I can get started DIY ing only thing I would have done different would be leaving the cap bolts long so thieves would need to work for it. And get a beating if I catch them 5 finger discount shopping off my boat. Or a little solder on the lower threads after the nut is tightened up. Love your ideas , keep up the great work 👍 👍 🇨🇦
Man I really appreciate your comment, and I love hearing how ppl would change stuff , some ppl even Email picture and I love it . Because I always safty its not about the finished product it's about the idea . We all make the same stuff for the most part . Bur we have our own ideas and that's the great part . I appreciate you watching brother and for telling other ppl about the channel thank you Sir
Ol a like the easy you started with ta day haha
Absolutely an awesome idea. You never cease to amaze me with the way you come up with solutions to everyday fishing problems. Keep the great videos coming !!!!!! Thanks for sharing your great ideas.
Thank you buddy , without people like you watching and commenting it wouldn't be worth doing I appreciate you brother
Looks great and good idea. Working in a fab shop we used wax on our blade cutting aluminum with a band saw. The wax gets the chips out of the way.
Yeah I learned after the fact lol . I made that like 4 years ago . Sometimes you have to learn the hard lmbo
Absolutely fantastic video nicely done my friend
Thank you brother
This is about the 10th video I've watched of yours. What I've watched spanned over the last few years, nothing in particular. I just wanted to say that I find you to be funny, entertaining, and surprisingly smart! I really enjoy your videos. The one about the planar boards is when I realized you're a lot more than what you appear on the surface. Keep up the great DIYs - they're awesome! 😃
Thank you I appreciate it . I think most people ( at first impression ) probably thinks I'm loony lol . But I don't care . I would rather have fun and make someone smile . I appreciate it
No drink drive and don't drink while use some power tools watch you all the time man good channel
I don't even drink lol
Super professional looking build and heavy duty. Keep em coming.
Thank you buddy
Another great project simple and strong. Keep up the great work 👍👍
Thank you for watching brother
@@FishinNStuff your DIY videos are great. Keep making them and we'll keep watching. You should do a video with some of your projects in use.
Love these rod holders and the price is the best ...
Cool idea! You can cut sheet aluminum on your tablesaw with a carbide tipped 24-28 tooth blade.
Use a spray of WD-40, a push block and a slow feed rate.
Hearing protection and a face shield are a MUST!
I believe that you cab cut steel sheet metal if you install your blade backwards , but using a cut off disc on thick Aluminum ain't a good idea haha
Fellow NC sportsman! I’d love these for our boat to haul in some Kerr Lake Cats and stripers!!
Yep you just right down the road , appreciate you watching brother
Great job!! I have a tip for you, throw away the WD40 it’s crap, causes more rust that it ever fixed. Get penetrating oil !!!!
You are a dang Genius, man that was a great video. Keep making these videos Brother.
Thank you brother
That was neat . I like all the projects you come up with
Thank you brother
Thank you for the quick response and I will be anxiously awaiting bud! Speck season in central Florida does not start till it starts getting colder in November! Thank you in advance.
Dude love your work and the ways you do things for fishing. Keep it up and believe me I'm watching and learning.thank you. God bless.
Good blues you too , brother you just don't know what that means and I appreciate it , I'm just a old man that likes making stuff lol
@@FishinNStuff well you keep it up old man coming from a old man my self or almost old my bones say so. Lol belive me if I lived closer I can work anymore make good money but ide try to get you to help rig my boat up. Or atlest my wheel chair I only got one rod holder left the other fell off. But I did add 2 pipes on the back that I add another piece holds 7 rods or 6 rods and umbrella got to stay cool. Lol. But I've been racking my brain I want difrent rod holders on front one on each side but I want to add piece so I can have a table top cutting board that can be added and moved out the way for days can't get up and walk alot. And I have them days. Even have days I roll my chair into the water over my lap and fish so need a table top so keep bait with me. Already got floating fish basket and I have used tote addy baits tools and it floats by me but wanting to make one better with lid something only 9in deep not big. But yea I love to fish and I no there's gonna be a day I'm stuck in my chair and can't get out so I want to be ready. But got to figure it out cheap. And yes I've thought about new seat so if I got to go well added bucket underneath. Lol. Jk am I. Lol. But yea thanks for your knowledge cause that build any boat can have it's nice. I'll deff be sharing.
Man that looks like some kinda professional built that. Oh yeah, some kinda professional did build it. Great job Kieth!!!
Some kinda professional nut case built that thing lol . Thank you buddy lol
Fishin N Stuff 🤣🤣🤣
Excellent video!
I truly enjoy watching your channel.Great DIY build.
Dang right my friend, Keith I truly want to just come hang out and fabricate and build stuff. I’ve always enjoyed designing and building all kind of things but never really had a home shop with all the tools to do some of the things I wanted to do. Keith,congratulations on another great video and thanks for sharing it with us. Congratulations on your channel taking off. I’ll give you a yell because I would like to get you to come help me figure out some things I’m doing to the Patriot Kat Pontoon. Thanks again for sharing this great informational video.🇺🇸
Thank you James I appreciate brother . We'll be talking
Best I have seen. Love your channel. Thanks for sharing.
Thats an awesome rod holder there and I'm gonna make me some of them thanks for all the great ideas. Thanks for the great videos.
Thank you for watching brother and taking the time to leave an awesome comment
That is a super nice quad rodholder! Extreme skills if you ask me (and nobody did)! LOL!
Nobody ever ask me haha thank you brother, I appreciate it
INNOVATION is your middle name! Superb video!
Thank you Sir , i try and be different
I love the Paul Harrel music when using the break press. Very cool idea, I will be stealing it. Thx you.
Thank you brother
Do you make videos ?
No I do not, I figure the music is on the list of Royalty free music that is allowed by youtube. But if you get sucked into watching Pauk Harrel, which isnt a bad thing, that's the only tune he uses.
I'm working on building a home shop but it will take time of course. The press/break would be a good edition.
@@icarusburning2208 i love that little break . Its not as good as a really press break but its handy . I was just checking buddy I was going to check out your Chanel , that's why I asked . You should make some about making a home office 😀
@@FishinNStuff well I'll have to start making some about the homestead projects I get into constantly. Thanks and have a good year fishing.
That's an awesome rod rack!! Love your ideas
Thank you Sir , I appreciate it
Man that polished job came out sweet. I'm always amazed on the projects you do. You make it look easy. Thanks for sharing brother 💪🎣😎
Stuff is only hard if you don't know how ti do it lol , I always look forward to your comments brother, thank you Sir
Very cool man, when I seen the U bolt around the cleat, GENUIS, I DIY a bunch of gear to my kayak, might be using this idea too as well, just on a smaller scale, great job
Thank you Sir, yeah im always saying that ppl focus on the DIYs I focus on the idea, you sound allot like me
@@FishinNStuff your welcome ,I got a little TH-cam page myself, no handle yet, put a few videos up there once in a while, got one of my DIY pontoons I built for my kayak on there
I just love his work and methodology!
EXTREMELY WELL DONE!!!!!!!
Thank you Sir I appreciate it
Level of skills...next level! Great build. Keep them coming!
Thank you Sir and thanks for taking the time to comment its encouraging
great vids ..... just a suggestion...... you need to research and make some shallow water spike anchors that everyone can build ...... need the mount also for the front and back of the boat. I have a hurricane that is rigged for my handicap buddy to get on and off with his wheelchair and we go speck fishing. All I’m lacking is front and back anchor system without a rope. So you think you can help. Thanks. Keep it up. I know you can do it.
I try and stay a couple videos ahead , what I mean is buying materials and ideas . But yeah I'll be thinking in that and see what I can muster up buddy
That truly looks AWESOME 👍. You are really innovative, and come up with really great ideas. Have a good week ahead my friend.
Thank you brother I really appreciate that, it worked pretty good too . My buddy's excited to get too use it lol
Thank you for sharing 👍
I built mine similar to yours, except i cut that thick aluminum with a cutting wheel on my 4-1/2" angle grinder - it cut through it pretty good. great design.
Thank you , I had trouble with the angle grinder before I used the jigsaw lolol angle grinder tried too kill me haha . The problem was I bought hardened Aluminum,,,,, don't do that lol . I didn't realize it was . I already ruined my cold
cut saw blade cutting hardened steel on that rod holder video 😁 ol well you live and you learn . I'd like to see it man keiff32@hotmail.com send me a pic
Love your videos I need a mate with a work shop like yours so I can make stuff like you
Nice build man. Can't wait to get a boat
Thank you Sir, when you get a boat and need to Know something let me know
@@FishinNStuff just picked up a 12' flat bottom for $75:00. Not much but it's a start
nice rod holder, thanks for sharing!
Thank you for watching I appreciate it
Fantastic build, definitely like that better than the ones they sell with only 2. My friend bought some for his new skiff, they're pricey too. Fantastic video
Thank you buddy it means allot coming from another youtuber ad good as you
Nice man! That turned out slick! I like it a lot. I understand the pain of drilling holes in a brand new boat. It's scary. Your builds are awesome and cheap to make. Looks fun to make as well.
Me too , it would make me sick to drill.in a new boat lol
That my friend is some high quality DIY stuff! thanks for all the tips!
Thank you brother
Really nice and much cheaper than driftmaster set-up
Drift masters are great , they really are but all boat accessories are crazy expensive
This is awesome!!!! You’re my hero Keith!!!! Right behind Dieter and JR. 😂😂😂😂😂
Hmmm lol
Looks awesome and a great idea cause you could take it out and use it on other peoples boats too!
Thank you brother , I appreciate you taking the time and leaving me a comment
Looks bullet proof! I sure am glad there is people like you that has the skills and tools to do this type stuff. I don’t know even if I had all the tools you have to do what you do. Maybe some of the less complicated stuff I would maybe attempt. I will say this you have to have a lot of “ patience“ not counting the engineering skills witch I lack in both. I do love watching you do your thing though. What a awesome channel!
Thank you brother , but I think you can do it . 6 years ago I knew absolutely nothing about TH-cam but I decided to try and make a video and it absolutely stunk lol . But I hit better ever time I tried again . Everything in life works that way . I think you can do it buddy
@@FishinNStuff Thanks dude! Love watching!
Nice work Keith 👍
yeah baby i like it. I'm gonna try to make one for myself for my 2001 basstracker.
Great idea awesome video.
Thank you brother
That was pretty awesome, Keith!!!
I can see where it could come in handy if you borrowed someone's boat and needed extra rod holders!!! I might have to see about making a couple of these for the new boat to go up on the bow if I had a guest angler that wanted to fish up front!!
Appreciate it brother!!!!
Yes Sir that's not a bad idea at all . You could put Pop up there lol jk . I like ol Pop .
😂😂😂😂
Really enjoy the stuff you make
Thank you Sir
I love it simple and very effective hope to make one or two soon
👍👍👍😜🏴🦄🎣😁🤞✌️
Very cool. I'm working on a set and this has changed my build. Thanks.
Yes Sir, hey thank you for watching I appreciate it brother
I love this! I just bought a new boat. Alumacraft Competitor 185 that I will be picking up in the Spring. I am getting ideas to outfit the boat and this is fantastic! I have been checking out your channel for awhile and keep learning. Thank you!
I have to say I have no intrest in rod holders or making a rod holder but I have to say you make your videos so intresting I watch them from start to finish and find them very very enjoyable. Your a very intresting and very smart man. Another great video.
I feel the same way about you , the way you tie flys , can play anything on a guitar , you ever watch Marlin baits , I bet you could do that but with flys and then fish with em at the end , it could work for you
I appreciate you brother you inspire me to do better with every comment
Great looking love it. Make a bank rod holder similar to that if you fish that way. That would be cool
Ive had that on my mind actually
If you sold it I'd buy quickly just got a new bass tracker for Christmas and don't want to drill holes either
That looks like a professional job to me... gooood stuffff
Thank you Sir
That’s expert level stuff there :-). Thanks for sharing brother!
Thank you brother , I appreciate that buddy
That's a nice set up it would be great for a time you need to fish all rods from one side kinda of thing
Yep like drifting or spider rigging , McCain thing is it beats nothing lol and my friend needed some rodholders
awesome idea brother! I will be building some this weekend, I like this better than any I've seen so far. I get mad at myself for not thinking of stuff like this myself lol. good job man, thanks for sharing. now I gotta find some scrap aluminum.
Thank you brother , don't be getting mad at yourself lol , thanks for watching brother
The best project yet!
Thank you buddy
Very cool men your video help me to solve my problem keep it up👌👌
Thank you buddy
That is a slick! I may have to do that on a smaller scale for my yak. Good job bud!
It turned out nice , I had an idea for a kayak rodholder mount that's removable but I've never made the video , the problem is my ideas for a hobie outback and not every one has one but I think it could work for most yaks
Fishin N Stuff yeah it wouldn’t have worked my yak. I have a Future Beach Mariner sit-in. I mounted a cleat up between the the cup holder and cockpit.
That mount would work good right there.
You have an amazing channel brother!!
Thank you Sir , I really appreciate that brother
By the way I enjoy your videos too . I fish for Striper too though I'm not the best , but I enjoyed your video about how to wash your boat thre easy way lol
Fishin N Stuff Thank you sir!!!
Hey brother, I like to see an innovator bring his ideas to life. My friend that was EXCELLENT craftsmanship!!! I noticed you're a North Carolinian, so am i, Cabarrus county area. Great job Keith! I don't know why you don't already have over a million subscribers! ☆Jay☆.
Thank you Jay , heck we practically neighbor's man , the channels been doing good , it's hard getting found on TH-cam. Man I really appreciate the encouragement and you watching brother
@@FishinNStuff 😃neighbors? Don't scare me like that brother😁. You do look kinda familiar to me. I deleted facebook back in November last year and and don't do Instagram or Twitter so I wouldn't have any way to communicate with ya other than TH-cam, sorry brother. You keep up the great work your doing and I'll keep smashin that like button!😀👌👍👍
Thank you brother
Very talented, thanks for the great ideas! I will be doing this!!
Thank you Sir
I need two....... just need the confidence to get started!!!!!
You can do it , getting started is the hardest part . I have the same problem every week, I have a list of ideas and I plans half the week trying to figure out the ones im really for . Just get started and itll work itself out
Top notch right there..... Bro your channel had taken off like a rocket and I understand why with these awesome how too's your doing..... Stay at it....
Thank you brother , you know and I'll tell you again I appreciate you brother
That’s pretty damn cool. Something like that would work great for crappie fishing
You're right , I wad thinking that too looks like a spider rig setup
Dang that was pretty awesome. If you're gonna leave It on the front of the boat you should add some lights to it.
I made it for someone else
Another fine DIY man, that’s genius!
Thank you Sir
Awesome job buddy. Loved it.
Thank you Sir
Hey thanks for responding so quickly. Oh yeah, this is a fantastic rod holder, great idea! Not exactly what I was getting at, I'll design something. But this is way cool
Thank you brother , i appreciate it buddy
You do great work.
Thank you Sir
That was an awesome DIY 🐟💣 👊
Thank you brother
Dude you make some killer stuff
Thank you brother and thanks for leaving such an awesome comment
Once you have that cleat mount anything is possible. I've been thinking of how to make a downrigger, rod holder system across the aft, you just finalized that. Thanks
Fantastic!!! Cheers from Canada!!
Thank you Sir , Cheers from the US North Carolina to be exact . I appreciate you watching brother
Great Job Keith!! Might think about putting a patent on some of your ideas before someone or some company starts making big money on your dime!!
They cant knock me off if they want , Lord knows I knock enough big companies off haha , I appreciate you commenting brother
Well hot Damm. I just purchased a 2012- 215 DC Cobia and the thing has a giant live bait well. An older Garmin and Lowance that's pinot to bad but I feel an upgrade coming. BUT I digress....It's a 21ft boat. It is freaking me out that it only has 2 rod holders on the whole boat so I've looking for others way to put a few other sticks into action. I bet they cost AT least a Benjamin. But MY MACGYVER YOU MAY HAVE JUST GIVEN
A SOLUTION THATS FUNCTIONAL.
Very cool idea, thanks.
Yes Sir thank you brother
That is a true work of art.
Ol man thank you Sir , I appreciate that and I appreciate you taking the time to make me feel good and leaving such an awesome comment
Another great video brother!!
Thank you brother
Absolutely rodtastic !!!
Lol thanks
I have to say. I've watched a couple of your videos and honestly because of you accent, it makes you sound shall we say not as intelligent. But this was a very well thought out "homemade" rod holder. I apologize if this insults you. Not meant as an insult at all. Rather a pat on the back for a very good idea that i am now thinking of using myself.
Great ideas
Thank you Sir
just found your channel and absolutley love it! ive watched just about all your vids plus got on the facebook page! great job dude keep it up, love me diy's and saving money, shout out from northern ontario canada!!!
Thank you brother , i appreciate you subscribing man be sure to post some pictures and show us what your up to when your building something
That's nice man!!! Looks awesome!!
Thank you Sir
Dude; regular skill saw cuts any aluminum like butter,,,,ear plugs and eye pro,,,for aluminum square/round tubing use miter saw,,,,table saw will make perfect flat stock cuts as well,,,,,epic cuts
That turned out real good.
Thank you Matthew , that means a lot coming from a guy that can build anything . I appreciate that brother
That came out GR8 And Looks good
Thank you brother
Awesome man I need one bad you did great job you need to patent it 👍
Thank you Sir, it turned out nice , k appreciate you watching brother
Excellent work!!!!
that my freind is as you would say is awesome no seriosly its a good idea i would probablly only do 2 holders but do both sides of the boat
It worked out better than I was hoping