How to Replace VTEC Solenoid 03-11 Honda Element
ฝัง
- เผยแพร่เมื่อ 24 ก.ค. 2024
- Buy Now!
New VTEC Solenoid from 1AAuto.com 1aau.to/ia/1AVVT00001
In this video, 1A Auto shows you how to remove and replace a VTEC solenoid. This video applies to the 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, Honda Element
This process should be similar on the following vehicles:
2003 Honda Element
2004 Honda Element
2005 Honda Element
2006 Honda Element
2007 Honda Element
2008 Honda Element
2009 Honda Element
2010 Honda Element
2011 Honda Element
🔧 List of tools used:
• 10mm Socket 1aau.to/ovx/1AXAA00017
• Needle nose pliers 1aau.to/oec/1AXAA00051
• Needle nose pliers 1aau.to/oec/1AXAA00052
• Ratchet 1aau.to/oBF/1AXAA00016
• Socket Extensions 1aau.to/ozq/1AXAA00015
• Torque Wrench 1aau.to/oqm/1AXAA00044
• Drain Pan 1aau.to/odg/1AXAA00320
Subscribe: / @1aauto
Check out our playlist:
Honda Element 2003-11 1st Generation: • Honda Element 2003-11 ...
For More Info visit us at 1aau.to/h/NH/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
![รวมเพลงลูกทุ่ง 6 หนุ่มไทบ้าน ฮิตติดกระแส ชุดที่ 1 l มนต์แคน ไมค์ ไผ่ เสถียร ไหมไทย พี [Longplay]](http://i.ytimg.com/vi/GD2v1OjMw5I/mqdefault.jpg)
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Stop
Usually I can't see what's going on in these kinds of videos, but she put a camera in the engine and I could see exactly what she was doing. That shows dedication and care. Keep up the good work!
IDK how. I couldn't even get a flashlight pointed in the right direction behind the engine.
Great female technician. Very intuitive. I'm genuinely proud of this woman.
I love watching Sue working on Honda Elements. Thanks so much..
+Ivy Hernandez Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
As an owner of a 2003 Element, I’m always glad to see videos on their repairs. Also, LOVE Sue’s videos !!
Sue is great
Sue is the best. I'm always excited to see 1A Auto videos with her. I just replaced the VTEC Solenoid yesterday and the engine light is gone. Thank you!
Thanks, Sue!! Your video was critical to my success today! I replaced the solenoind in our 2006 Element. It's so rare to see a woman in car repair videos!!! I'm pretty darn good at repairs, and I really got a boost of confidence seeing a fellow woman on the job. Thanks!!
+A Kinder Thanks for checking us out. 1AAuto.com
I loved that you could see exactly what she was doing. I wish there was an angle, only for a moment, that showed how she was reaching in... where to put my arms.
Great video. I watched a bunch and this one was the most complete and helpful. Just. Changed mine successfully. Thanks
You are brilliant. I would like my wife to repair my Honda Element like this. Thank you ☺️
This is an amazing video yes she put a mirror on the back side so that we can see what's going on and she walks you through every step of the whole process showing you how not to overtook torque the bolts showing you how to take off all the connectors I mean this is perfect thank you for making this video and I love the fact that she's a woman because never underestimate the ability the creativity and the intelligence of a woman because they can do anything
got a solenoid faulit in my 08 element after hitting a deep puddle on my passenger side (US element). never had the fault before. this video helped me find the solenoid, and confirmed my suspicion that water got into the connector(s). i pulled the connectors off. hit them both (and the solenoid pins) with electrical parts cleaner. let dry. then some dielectric grease. so far so good after a few hundred miles. time will tell.
Thank you for putting these videos together, they're why I keep buying from you! Seriously, thanks!
Thanks Sue! 😊🙌 Simple, straightforward
Thank you for this video! It's great having the camera behind the engine to see what's going on
I was looking for the foot pounds torque on the bolts and your video delivered. TY!
I just did this job twice (swapped the Solenoid between my CRV and E). I would highly recommend NOT removing the cable ties from the tin cover- just unbolt the one screw holding the cover to the solenoid and attach your new solenoid to the old cover. I really struggled to get the cable ties out and at one point was seriously damaging one- plus my hands were cramping. I'm glad I simply left the cables tied off to the cover.
Thanks for this!
I have a 2009 2.4l Honda Accord with the same exact engine was able to do it myself. 😊
Excellent tutorial and very good camera work to show the task in detail. 👍👍
Not sure if everybody caught that. After she loosened the first bolt and then moved on to the second, she stuck her other hand in and continued to loosen the first one while simultaneously working on the second one with the ratchet. This may not seem significant, but that is a sign of a total experienced professional.
Awesome job on this video. Thank you!
Thank you. Very helpful video.
Sue you're so great. Thx!
Great video, very clear. Thank you!
Great videos. Thanks Sue.
I wanted to add, I replaced this part OEM three times and still blew three times. Problem was the connectors were corroded and letting moisture in the solenoid. I replaced the connectors and used some high heat, gasket maker to top off the connectors avoiding moisture going in. If you keep putting in new solenoid and they fail, check for corrosion on the two connector clips. That is your problem, not the solenoid itself.
Es de gran ayuda el video muchas gracias solo falta que explique el porque lo cambian que hace el carro cuando está fallando el i-Vtec
"parts clean" ? What are you cleaning up afterward?
Thanks for the video. Keeping elements alive is a worthy task.
She is easy to understand.
Nice job. !!!!
Where is the shift solenoid on the Element 05 or is it the same as the Vtecj solenoid? Someone please help is it outside of the transmission or inside of transmission?🙁
great video thankyou now to change mine
+B4 W Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Just bought my part online just waiting for it to come in so I can replace it!!
2004 automatic element talks longer time to shift 1 to 2 and 2 to 3 speed .. do I need replace this solenoid ?
The second solenoid connector (around 1:00) is more rounded and I'm not feeling a tab on it like the square one has. Is there a trick to this one? I noticed a cut in the video so I assume this one's a little more tricky.
How much would this cost to have done at a garage? Mine needs to be replaced, but I don’t want to attempt it myself
sue, you rock!
+michael woythaler Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com:
1aau.to/m/Shop-1AAuto-c
I like your gloves
It's funny. I just talked to a guy at Firestone about how he did this on his Element and it's something to watch out for on these cars.
+MrWilsonxD Thanks for checking us out. 1aauto.com
MrWilsonxD Yea, my 04 Element is leaking oil now. P2646 code popped up, which is the solenoid. If I would’ve know that this was a problem with the VTech engines, I wouldn’t have purchased it.
Thanks boss lady
I got a p2646 code I replaced the vetc solenoid and the oil pressure switch
The code keeps coming back is there anything else I need to check
What were the symptoms of that part been bad??
Ty!
Can you make a video on changing the second VTEC screen located behind the power steering pump?
Will this always trip a code?
Does this fix check engine code ps511?
I did notice that she didn't remove the pin lock for the oil pressure sensor and replace it back in the connector that can cause problems in the future like wire coming out and letting moisture in
I’m getting a code of p2647, is this the kind of repair that will clear that code?
That's the best way to look at a bolt..."visually"...
How do i tell if i need to replace this unit, or simply replace the gasket and a new screen? My check enine light did come on.
Thanks for info and video.
I would first clean the screen and put everything back together hopefully that works if not then you will have to take it back off and buy a new solenoid
Other than leaking how would you know if you had to replace the solenoid?
Is this the shift solenoid
I Have A Honda Accord 2.4L And A Code Came On P2647 A Rocker Arm Actuator System Stuck On Bank 1….Can This Part Fix It?
Hi, Sue your video helps a lot thank so much,l replace that part you talking about on your video but my Honda Element 2003 but the car still doing the same thing, when I try to spend on normal operation of the car don't want to go, can you tell me if there's something else l need to do to fix it, please let me know.
Was it a bad part that was new by chance?
Threre’s a second screen that might be clogged. It’s located in the front of the engine, by the alternator.
Sometimes it's the connector for the vtec oil pressure switch! Mine was really corroded and I needed to replace the connector
This is incredible that because that little screen gets dirty then the car starts acting losing power jumping like a wild horse and very dangerous when driving in the highway and you need the power to speed it up. !!!!!
Don't get anything except OEM for this part. You'll regret it like me. Did this 5 times( aftermarket had a warranty, thank God) OEM works like it should. Ugh. Good luck!
Do you guys carry replacement mounting hardware for the vvt?
+Patrick Sison Thanks for checking us out. We would not carry the hardware for this specific repair. You should be able to get new hardware from a local auto parts store or re-use the existing hardware if they are in good condition.
I had the same thought, those rusted bolts could have been replaced with new ones.
How do you know if you have a bad solenoid or it needs to be replaced?
+Christopher Chavez Take note of these three common symptoms of a bad solenoid:
Vehicle won't start.
Starter solenoid fails to reset even after switching the car off.
Bad starter solenoid sound (successive clicking or grinding sound)
@@1AAuto it wasn't a starter solenoid that was replaced. it was a vtec solenoid.
On mine, you get a hard downshift while driving and a P2646 i think code. One case was low oil. Other case appears to be a bad gasket on the vtec part. But yeah. The Vtec tells vehicle how to shift, so you can get some weird symptoms when that screen gets clogged.
Oh no I cleaned my part with brake cleaner. I thought it would be all evaporated by the time I put it back on what should I do now!?
Are you laying on top of the engine? 😂. I had to. I could not reach good at all.
What type of ratchet are you using???
I was wondering the same thing I like it because you can get a better angle with it
Do we have to remove the oil before doing this ?
No
No but you should change this part or clean the screen before you do an oil change
Ms.Sue, why not advice the price for that part at A1? I swapped my solenoid on my 05 element after OBD code 2646..after install unit Crank immediately, I shut off degrees that side of engine and 24hrs later after sitting unit fail to start...removed solenoid with old one that flag OBD code...unit still will not start... turns over killing battery, but will not start? please any advice?
Kim, Florida
+Kim Juno We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
What was it?
I have change this gasket 4 times and still leaks oil !!! 😫😫😭😭 What can I do to stop this leak?
Clean off the mating surfaces and don't over tork
so what are the mechanics doing the rest of the hour i paid them for? lol
the bill
My top bolt is rounded off idk what to do to get it off
They make special sockets for rounded bolts. The sockets have teeth that dig in to the bolt and grip it. Just go to a tool store and ask for help. They'll know what you need.
PS your bolt probably got rounded off by using the wrong socket. Use a 6 point socket of the correct size, next time. Not a crescent wrench, either.
Can you remove this part without draining the oil?
Yes
I did this job and it’s still leaking, very likely I overtorqued the bolts, thanks
What happend when that part goes bad?
What’s your part# please
+Abdullah kaplan Thanks for watching! Buy the part in this video on 1AAuto.com: 1aau.to/ia/1AVVT00001
Why have you replaced the whole solenoid when the rubber gasket was rubbish only?
Two Elements, both eventually went into "limp mode" with associated code(s) - VTEC Assembly (OEM) R&R solved both...\m/
It is not the VTEC solenoid most of the time,called do an oil change using a high quality oil filter.Cheap oil filters cause this and encountered it at least 3 times
Dirty oil will cause the screen 4:07 to plug up.
Buy a new screen (gasket)! Solenoid rarely goes out, but just a little obstruction in the screens will put your engine into limp mode making it LOOK like the whole assembly is bad.
Probably over torqued by someone attempting to reduce the oil leak.
Very stupid Honda design. !!!! So what is the reason to have an oil filter. ???? V-etc plus another screen by the timing belt side. !!!!!
Looks like this is a very easy job !! It is not. !!!!!!
I like how you guys show how easy repairs are by having a woman do the repairs
Yep. If she can do it, anybody can do it.
Or maybe the woman is the most competent mechanic....
@@hxhdfjifzirstc894 OK you sexist nitwit, let's see you do it.
Great video. The hardest were those plastic wire fasteners. Just cut them and zip tied later.
+@l-gool_t Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c