Alex, your neighbor should be very happy with that unit. Alot of channels cuss those plastic carbs, but i think they are some of the easiest to clean. Ive never had one that didnt need anything more than what you did to that one. Have a happy and prosperous new year in 2024! 🎉✌🇺🇸
Happy new year Roger. Yea these carbs can be a bit sensitive to getting clogged but they really are simple to work on and don’t have to worry about the corrosion of metal. I hope things are good your way!
ALEX. My brother Happy new years 🎉btw the jet that was blocked I've seen i believe STEVE SMALL ENGINE REPAIR showed drilling just a bit to make jet bigger thanks Chris from OHIO
Alex, if you’re going to show a black carb with debris in the bowl please dump the contents into a clear or white container so we can actually see what you’re showing us. Thanks.
I am not a mechanical kind of guy, I followed your suggestions and sure enough it was the same issue. I had a lot of particles in the bowl, I cleaned it out put it together and it started right back up. Thank you! Great video.
Thank you! I really appreciate your support as always. I’m doing my best fun content, but I like to put these little tutorial videos in as well to help people.
Ok all is well. I disassembeled the tank and carb as you did in the video. Only found a spec of debris in the jet, but cleaned everything with parts cleaner, re-assembled. Started with the first pull...PROBLEM SOLVED!!!! THANKS
Hello Alex, I have the Husqvarna 3200 model. I would have it run fine for about an hour, then I took a break. After the break, the unit would run for about 15 minutes then turns itself off. I'd wait for a few minutes to restart, then it would run for another 5 minutes then stops again. Each time, it gets shorter and shorter! Do you think it is because it gets too hot? Kind of strange if that is how it works. I've had this unit for about a year and this is my 2nd time using it. Any advice is greatly appreciated! Again, it would run for an hour at the beginning with no issues.
Slightly jealous that you can do this in Tshirt and shorts....I look outside and it's very cold, rainy and windy....(The Netherlands) Then again your summers must be uncomfortably hot. Best wishes!🍾🥂👍
Yes we have mild winters here, but very uncomfortable summers. Usually 100-110 degrees Fahrenheit with high humidity. Thank you for stopping by the channel.
It got to 30 last night in West Texas and it’s been nice and warm all day But it’s fixing to change to bad weather Not much small engine repairs this year but hoping it is better next year 😊
Great video. I have the same pressure washer and seem to have a problem. I can only run it for 10 maybe 15 mins until it shuts off and a cloud of smoke comes out of the exhaust. Seems like too much fuel is going into the carb and the filter gets saturated pretty good. Not sure what to do. I appreciate any advice. Thanks
I just finished watching the video and since I have the same washer I thought I would ask a quick question My washer starts and runs, although it surges when not spraying, but dies the moment you start to spray. Any ideas as to the issue. I do plan to remove the carb and make sure nothing is clogged.
Yes it will surge usually when trying to run it on starter fluid as it is not getting the proper amount of fuel. It’s going to be your carb or fuel not getting to the carb. Hope this helps.
Way too much plastic that should be metal parts on that unit for my liking. Definitely a well taken care of unit and easy fix though. Neighbor will be very happy.
Alex, your neighbor should be very happy with that unit. Alot of channels cuss those plastic carbs, but i think they are some of the easiest to clean. Ive never had one that didnt need anything more than what you did to that one. Have a happy and prosperous new year in 2024! 🎉✌🇺🇸
Happy new year Roger. Yea these carbs can be a bit sensitive to getting clogged but they really are simple to work on and don’t have to worry about the corrosion of metal. I hope things are good your way!
I love them 😍
ALEX. My brother Happy new years 🎉btw the jet that was blocked I've seen i believe STEVE SMALL ENGINE REPAIR showed drilling just a bit to make jet bigger thanks Chris from OHIO
That is a great job on getting this pressure washer in running condition again there Alex
Thank you so much Robert! 🥳 happy new year
@@freedommowers420 happy new year to you and your family Alex
@@robertmailhos8159Happy New Year Robert! Be safe! 🎉👍
@@rogermcdonald1607 same to you Roger and your family as well
I am scrapping with grandpa. This is my other channel.
Thank you very much for the video! I followed everything you did, and my pressure washer started with the first pull...👍
You do great work.HAPPY NEW YEAR hope you a great 2024
Thank you very much!! Happy new year 🎊
Alex, if you’re going to show a black carb with debris in the bowl please dump the contents into a clear or white container so we can actually see what you’re showing us. Thanks.
I am not a mechanical kind of guy, I followed your suggestions and sure enough it was the same issue. I had a lot of particles in the bowl, I cleaned it out put it together and it started right back up. Thank you! Great video.
Thanks for the video bud! I enjoy every one you make. Have a good week
Thank you! I really appreciate your support as always. I’m doing my best fun content, but I like to put these little tutorial videos in as well to help people.
I always look forward to your videos. Thanks for posting them.
Happy and healthy New Year to you and your family.
Thank you so much for the support. Happy new year!!!!
Thank you so much was able to fix mine.
You're welcome! Appreciate you stopping by.
Great view and details will try it on mine to see if i get it to work thanks bro
Nice work alex 😊 one happy neighbor
Thank you so much John 😎🇺🇸
@@freedommowers420 you're welcome Alex brother you're letting Freedom Ring and letting those small engines sing 😎
Ok all is well. I disassembeled the tank and carb as you did in the video. Only found a spec of debris in the jet, but cleaned everything with parts cleaner, re-assembled. Started with the first pull...PROBLEM SOLVED!!!! THANKS
Wonderful. So glad you got it solved and running good again!!!
Happy new year. Thanks for vids.
What is that spark tester called?
I can’t remember the brand but you can just look up spark tester on Amazon. They are relatively inexpensive.
Awesome video. Hopefully my fix will be that easy.
I hope you can get yours going easily.
Hello Alex, I have the Husqvarna 3200 model. I would have it run fine for about an hour, then I took a break. After the break, the unit would run for about 15 minutes then turns itself off. I'd wait for a few minutes to restart, then it would run for another 5 minutes then stops again. Each time, it gets shorter and shorter! Do you think it is because it gets too hot? Kind of strange if that is how it works. I've had this unit for about a year and this is my 2nd time using it. Any advice is greatly appreciated! Again, it would run for an hour at the beginning with no issues.
Slightly jealous that you can do this in Tshirt and shorts....I look outside and it's very cold, rainy and windy....(The Netherlands)
Then again your summers must be uncomfortably hot.
Best wishes!🍾🥂👍
Yes we have mild winters here, but very uncomfortable summers. Usually 100-110 degrees Fahrenheit with high humidity. Thank you for stopping by the channel.
@@freedommowers420 and probably insane amounts of mosquito's and other bugs...🤐
It got to 30 last night in West Texas and it’s been nice and warm all day
But it’s fixing to change to bad weather
Not much small engine repairs this year but hoping it is better next year 😊
Very good video thank you for the video
Great video. I have the same pressure washer and seem to have a problem. I can only run it for 10 maybe 15 mins until it shuts off and a cloud of smoke comes out of the exhaust. Seems like too much fuel is going into the carb and the filter gets saturated pretty good.
Not sure what to do. I appreciate any advice. Thanks
Nice job with that carb. You explained that really well
Good job
Thank you!
I just finished watching the video and since I have the same washer I thought I would ask a quick question
My washer starts and runs, although it surges when not spraying, but dies the moment you start to spray. Any ideas as to the issue. I do plan to remove the carb and make sure nothing is clogged.
Yes it will surge usually when trying to run it on starter fluid as it is not getting the proper amount of fuel. It’s going to be your carb or fuel not getting to the carb. Hope this helps.
Mine is leaking from the red rubber hole on the carborator
🙏😩 them plastic carburetors
Way too much plastic that should be metal parts on that unit for my liking. Definitely a well taken care of unit and easy fix though. Neighbor will be very happy.
man i love those plastic carbs ....almost always a clean n flush gets em goin again
My name is Drew. Talk soon Alex
Awesome drew. I took the number down. I’ll give you a call and see how things are going your way. Thank you.
I look forward to it. I also Have a few things i need fixed@@freedommowers420
That’s not an “easy” fix!
I’m sorry it wasn’t an easier fix. This is the easiest and most usual issue.