I was so ticked off about my air not working. It literally just stopped. Got home from work, turned to trusty old TH-cam and now my air is back and better than ever. People who post these videos are my saviors. Thank you good sir.
The moment I turned to u-tube looking for help, I found this help, Mazda 2012 A.C trouble shooting And I went outside pushed the a.c relay like you said and thats the problem and my Son asked me if I found why the A.C wont start, I told him, very happy ," Hey my son,I always find the answer in U-TUBE ALELUYA.🙏👍
May god bless You! This video just safe my money from workshop cost. Just tried swapping AC relay with Horn relay and it works! I just need to buy a new AC relay that cost not too much to replace the old ones. Thank you and 🤎 From Malaysia.🇲🇾
Hey dude, you posted this 5 months ago, but did this ever fix the AC issue for you? I have a Mazda 3 with this issue and replaced the clutch but my issue continues.
@@SlampthChompthunfortunately my issue was mroe than electrical related. It really was just the compressor itself. Replaced it, charged the system, and it's working again.
@@SlampthChompth Took the serpentine belt off (the speed3's belt spins the compressor as well) and spun the pulley. I could hear rattling, which meant either the clutch or some bearing was bad. The clutch itself also seemed seized as it would not spin.
If the clutch is really the problem can it be replaced? Its a easy process or a hard/costly one? I wouldn't really want to replace the whole compressor since it costs around 500$
I have this issue on my 08 Mazda 3, compressor won't engage. I just replaced the clutch but the issue continues. I'm going to try the suggestion in this video.
If the clutch still isn't working you said it could be low on the refrigerant. When I use the r134 kit the needle just stays in the red. Can I try to fill it anyway
Relay works on AC, also tried couple other fuses for the ac magnetic clutch but havent gotten it working. Giving straight 12v to the compressor makes the clutch click but cannot really get any readings with a multimeter coming to the compressor it self. Hmm.. any ideas to check? Gott my mazda 3 1.6l
my 7.5 keep blowing... i change it twice a week ac kicks for few day/hour then blew again (no more ac until i change the 7.5 fuse) do you have any idea ?
Hi Lehew i having problem with mazda 3i 2009 the fuse 10 amp ( mag ) keeps blowing it runs for 5 seconds and the fuse go out again what should i check to why is blowing the fuse any help will be appreciated
Can someone enlighten me about ac compressor how are they like. are they different in each car for example i have a mazda3 gx 4dr 2013 1.8l engine and i need a fixing on it but i need knowledge on what and how is it and can i put a 2010 ac compressor in it? and do they haev a particular code or number? and can someone tell me about a website or app where i can find the part with my cars VIN number
Thanks for the video. I followed these steps and found that my compressor is kicking in with the AC. So the fuse is probably okay. It is still blowing hot air. Also, the radiator fan goes to max everytime I turn the AC on. Do you think it could be a faulty thermostat causing these two problems? I topped up my freon. So I know it is not that.
Did you ever fix this? I also have this issue, I just replaced the clutch but the issue still exists. Compressor won't engage. AC button turns on, the fuse doesn't seem broken. Not sure about the relay. Going to try swapping it with a different compatible relay, as well as the fuse. Gosh I hope it's that easy.
After replacing the clutch and checking the fuses, and the issue continued, it was apparent it was going be a job I wasn't going to be able to do. I had to take it into the shop, and they ended up replacing the compressor. Almost 900 bucks for that.
Anyone have trouble with their PCM ? On Mazda. My fans aren’t turning on at all even with A/C on and off. Change thermostat. Engineer temp sensor and whole new fan assembly
I'm having the exact same issue on my 08. Compressor will not engage. I'm going to try swapping fuses and the relay like he does in this video to see if that's the issue. I'll report back my findings. If you also figure out how to fix your issue please let me know! After replacing the clutch and belts I'm about ready to either buy a new car or pay who-knows-how-much for AC repair. Please let me know if you fixed yours and how, and I'll do the same for you. Update: unfortunately I ended up taking it into a shop and they replaced the entire compressor. $880.
@@LehewTech Refrigerant you Imbecile..Freaking want be Tech..You are a backyard Mechanic pulling parts dont know shit about Diagnosing..your nickname is Parts Puller
![DIAGRAMA de FUSIBLES Mazda 3 Año 2010 - 2013 [ En Español ]](http://i.ytimg.com/vi/4M1sBNhTYNc/mqdefault.jpg)
I was so ticked off about my air not working. It literally just stopped. Got home from work, turned to trusty old TH-cam and now my air is back and better than ever. People who post these videos are my saviors. Thank you good sir.
Appreciate people like you who take the time to show us out here how to troubleshoot issues like this. Very helpful and saves me a lot of money.
The moment I turned to u-tube looking for help, I found this help, Mazda 2012 A.C trouble shooting And I went outside pushed the a.c relay like you said and thats the problem and my Son asked me if I found why the A.C wont start, I told him, very happy ," Hey my son,I always find the answer in U-TUBE ALELUYA.🙏👍
May god bless You! This video just safe my money from workshop cost. Just tried swapping AC relay with Horn relay and it works! I just need to buy a new AC relay that cost not too much to replace the old ones. Thank you and 🤎 From Malaysia.🇲🇾
Much obliged! I have a 2010 mazda and I was so confused watching other peoples vids. You made it much easier to understand and to test
Short, concise and informative. If just more videos would be like this one. 👍
Thanks!
Thanks for the advice my ac died in town yesterday it was so hot. Going to give these a try 🤗
Got the same issue, did you get fixed?
@@johnnymetalheart8097 nope ive tried everything
Thanks for sharing this! I'll be giving this a try on my speed3.
Hey dude, you posted this 5 months ago, but did this ever fix the AC issue for you? I have a Mazda 3 with this issue and replaced the clutch but my issue continues.
@@SlampthChompthunfortunately my issue was mroe than electrical related. It really was just the compressor itself. Replaced it, charged the system, and it's working again.
@@Ryan-Louis dang it that's not what I wanted to hear. How did you determine the compressor itself was bad?
@@SlampthChompth Took the serpentine belt off (the speed3's belt spins the compressor as well) and spun the pulley. I could hear rattling, which meant either the clutch or some bearing was bad. The clutch itself also seemed seized as it would not spin.
Mate this was so quick and turned out to be the problem saved me a trip to the auto electrician
My Mazda is a/c is coming out cold for the first 2 seconds then it gets hot, any idea wat it might be?
Did u figure out the problem?
I did just that on my 2006 Mazda 3 but do you know where the AC 7.5 fuse is on my model ?
If the clutch is really the problem can it be replaced? Its a easy process or a hard/costly one? I wouldn't really want to replace the whole compressor since it costs around 500$
I have this issue on my 08 Mazda 3, compressor won't engage. I just replaced the clutch but the issue continues. I'm going to try the suggestion in this video.
If the clutch still isn't working you said it could be low on the refrigerant. When I use the r134 kit the needle just stays in the red. Can I try to fill it anyway
Relay works on AC, also tried couple other fuses for the ac magnetic clutch but havent gotten it working. Giving straight 12v to the compressor makes the clutch click but cannot really get any readings with a multimeter coming to the compressor it self. Hmm.. any ideas to check? Gott my mazda 3 1.6l
my 7.5 keep blowing... i change it twice a week ac kicks for few day/hour then blew again (no more ac until i change the 7.5 fuse) do you have any idea ?
at my repair shop they say 3k to change the compressor but fuse cost 2$ for 5 packs
Hi Lehew i having problem with mazda 3i 2009 the fuse 10 amp ( mag ) keeps blowing it runs for 5 seconds and the fuse go out again what should i check to why is blowing the fuse any help will be appreciated
I have the same issue. Did you ever figure out the problem?
Can someone enlighten me about ac compressor
how are they like. are they different in each car for example i have a mazda3 gx 4dr 2013 1.8l engine and i need a fixing on it but i need knowledge on what and how is it and can i put a 2010 ac compressor in it?
and do they haev a particular code or number?
and can someone tell me about a website or app where i can find the part with my cars VIN number
My 2012 Mazda 6 is in a tight hard to reach spot. It's tucked right under the side panel
Thanks for the video. I followed these steps and found that my compressor is kicking in with the AC. So the fuse is probably okay. It is still blowing hot air. Also, the radiator fan goes to max everytime I turn the AC on. Do you think it could be a faulty thermostat causing these two problems? I topped up my freon. So I know it is not that.
Dude, i have the same problem, did u figure it out?
@@johnnymetalheart8097 nope. It kinda just fixed itself
Will it be the same for a 09
I just replaced the compressor and not the clutch is not engaging. Could it be that there is no free on? Is that sort of a safety?
Did you evacuate the air and add freon after replacing the compressor?
Can you make a video how to take out the 80 a fuse.Thank you
That just pulls straight out with your fingers.
I also have same problem.. already replace the compressor... but the compressor magnet not working also.. thanks for the tips...
Did you ever fix this? I also have this issue, I just replaced the clutch but the issue still exists. Compressor won't engage. AC button turns on, the fuse doesn't seem broken. Not sure about the relay. Going to try swapping it with a different compatible relay, as well as the fuse. Gosh I hope it's that easy.
After replacing the clutch and checking the fuses, and the issue continued, it was apparent it was going be a job I wasn't going to be able to do. I had to take it into the shop, and they ended up replacing the compressor. Almost 900 bucks for that.
Thanks Man!
This I will use ASAP for solving the issue.... :-)
Anyone have trouble with their PCM ? On Mazda. My fans aren’t turning on at all even with A/C on and off. Change thermostat. Engineer temp sensor and whole new fan assembly
Thanks for sharing this...
Changed out the clutch relay and ac still ain’t working help! Lol
I'm having the exact same issue on my 08. Compressor will not engage. I'm going to try swapping fuses and the relay like he does in this video to see if that's the issue.
I'll report back my findings. If you also figure out how to fix your issue please let me know! After replacing the clutch and belts I'm about ready to either buy a new car or pay who-knows-how-much for AC repair. Please let me know if you fixed yours and how, and I'll do the same for you.
Update: unfortunately I ended up taking it into a shop and they replaced the entire compressor. $880.
damn thats like 400 labor for a 10 minitue job
you aint no damn tech...freon is has been obsolete since the early 90s which was R12
Better check your freon!
@@LehewTech Refrigerant you Imbecile..Freaking want be Tech..You are a backyard Mechanic pulling parts dont know shit about Diagnosing..your nickname is Parts Puller
Sour grapes Mazda tech, won't get to charge 1.5 hours for a 10minute job.