I gotta put a new back tire on mine. There's nothing more fun than scaring the poop out yourself while loosing traction under acceleration at like 30mph! All I did was the old zip tie trick.
So, I did the exact thing with my mini bike and I was wondering if you had the same issues. 1) my chain will pop off constantly, no matter the situation 2) My throttle will get stuck on acceleration, which is obviously a massive hassle going down a hill.
i have same set up with cold air intake aftermarket jet 10 hp i think in carb header and torque converter clutch couldnt keep front wheel on ground ordered rear sprocket with 10 less teeth it`s crazy fast and alot of fun and still has a governor on it will remove it after i get billet fly wheel and heavier valve springs
Bruh check out Amazon and get you a hydraulic brake for like 20ish bucks. Works great and it even has a little spot to hook a brake light. I didnt know that when I bought it I seen it after I installed it.
Lol I've had a 212 green doodlebug for 3 years now the engine still runs like a beast totally worth the 100 bucks for the engine best thing is you can beat the hell out of the engine and not worry about blowing them up because they only cost 100$ and like I said i beat the shit out of mine every summer and it still starts up with one pull.
@@cwoutdoors4522 yeah man as long as you change the oil and keep the carb cleaned she should run for a few years before you need a new engine I only run mine in the summer so the winter months it's not being used but if say you can run this bike all year round for a solid three years before you need a new engine if maintaining it properly that includes cleaning the air filter to be honest I've only cleaned my air filter twice other than that maintenance is pretty easy and for 100$ big deal if you blow the bitch up lol 😂
I just bought myself one and did the stage 2 kit with a 22mm mikuni carburetor. Thing is to fast for the frame I built... I hit about 35 before the chain wants to come off and things get squirrely
The clutch is on backwards...just sayn..get it wet or oily and your walkn...plus.take the governor off,theres one on the throttle an one in the engine.....I have a red one that I've made called the Duke of death..I'm 6'3" an 250lb and it goes 45mph and will throw you completely off if you're not real careful...it scares the crap outa anyone who's rode it...SO MUCH FUN
I put the clutch on the way I did so it would like up with the rear sprocket better, I did my research and by doing it this way it’s not making a difference. We might take the five or off but we have bigger and better machines right now that we are focusing on. Sounds like your mini bike is a blast
A hemi Tops out at 40.71 on my db30r with the governor spring zip tied and 70t rear sprocket and the torque is fuckin crazy wheelie and burn out machine
I have a 212cc predator engine. Soon I’m going to put a cam and flywheel and dirt bike carburetor. I wonder how that’s going to play out but, you got a nice bike there man
Hey man i’m having a problem with my 212cc where it will only start if i have it at full throttle and it wants take off every time I start it. Any fixes you know of?
I have a manco streaker with a 3.5 tecumseh I used to ride as a kid. I still have it. I’m thinking about putting this engine on it. I could get 30 mph with no governor with the Tecumseh. Just wondering if this 212 will fit on the streaker frame.
Yes you’ll need a clutch that fits the 3/4 shaft and a bolt to mount it. I would recommend a good quality chain because this motor rips haha. Also, you might need a predator 212 bolt mounting kit, that’s what we used to mount it on
Don't be too hard on these guy's . They just graduated from disney princes bikes, give them a few year's to get familiar with these pure death machines. It's like going from a ford pinto to a formula 1 car.
Me and my uncle have been trying to find a project like this to have some fun during quarantine, do you think this would be a good starter project for us? Edit: also do you know what the least amount of money to make one of these would be?
Want to see it getting sent?? Here you go: th-cam.com/video/rk5N8Yv6_tk/w-d-xo.html
I gotta put a new back tire on mine. There's nothing more fun than scaring the poop out yourself while loosing traction under acceleration at like 30mph! All I did was the old zip tie trick.
So, I did the exact thing with my mini bike and I was wondering if you had the same issues.
1) my chain will pop off constantly, no matter the situation
2) My throttle will get stuck on acceleration, which is obviously a massive hassle going down a hill.
Yes our chain has come off a few time now
Thanks, was just wondering if I was doing something wrong
Yea it happens to me too but I deal with it I put a tensioner but It still pops and also sometimes the chain snaps and I have to get a new chain
Get a motorcycle chain
Has to be perfectly lined up. No exceptions.
i have same set up with cold air intake aftermarket jet 10 hp i think in carb header and torque converter clutch couldnt keep front wheel on ground ordered rear sprocket with 10 less teeth it`s crazy fast and alot of fun and still has a governor on it will remove it after i get billet fly wheel and heavier valve springs
Love these old school mini bikes 🏍
There not old school
@Sidewayz GARAGE i have 2
@Sidewayz GARAGE plus a have front feneder on it
@Sidewayz GARAGE BTW stfu
Very cool bud you guys ride like we do you don't baby them I support it super cool
Yeah man thanks for the comment 🤘🏻🇺🇸 stay tuned for some sketchy stuff on it
@@cwoutdoors4522 ya buddy can't wait I'm excited for ya
Bruh check out Amazon and get you a hydraulic brake for like 20ish bucks. Works great and it even has a little spot to hook a brake light. I didnt know that when I bought it I seen it after I installed it.
Lol I've had a 212 green doodlebug for 3 years now the engine still runs like a beast totally worth the 100 bucks for the engine best thing is you can beat the hell out of the engine and not worry about blowing them up because they only cost 100$ and like I said i beat the shit out of mine every summer and it still starts up with one pull.
That’s what we love to hear haha, someone who gets it
@@cwoutdoors4522 yeah man as long as you change the oil and keep the carb cleaned she should run for a few years before you need a new engine I only run mine in the summer so the winter months it's not being used but if say you can run this bike all year round for a solid three years before you need a new engine if maintaining it properly that includes cleaning the air filter to be honest I've only cleaned my air filter twice other than that maintenance is pretty easy and for 100$ big deal if you blow the bitch up lol 😂
I have this exact same bike, just with street tires, I bought it off some guy at work, any idea what the actual bike is called?
My go kart has that engine
My bicycle has my legs with monster energy drink
I just bought myself one and did the stage 2 kit with a 22mm mikuni carburetor. Thing is to fast for the frame I built... I hit about 35 before the chain wants to come off and things get squirrely
@@alburritox4475 🤣
Me too
is the engine stock??
Just wondering what hp motor is this and what gear ratio are you running, is it a 2 or 4 stroke
The clutch is on backwards...just sayn..get it wet or oily and your walkn...plus.take the governor off,theres one on the throttle an one in the engine.....I have a red one that I've made called the Duke of death..I'm 6'3" an 250lb and it goes 45mph and will throw you completely off if you're not real careful...it scares the crap outa anyone who's rode it...SO MUCH FUN
I put the clutch on the way I did so it would like up with the rear sprocket better, I did my research and by doing it this way it’s not making a difference. We might take the five or off but we have bigger and better machines right now that we are focusing on. Sounds like your mini bike is a blast
Governor* not five lmao
@@cwoutdoors4522 I fully understand..you guys are doin fine...be safe and have fun
You probably won’t see this but is that a old Coleman ct100u frame?
Pretty close think it was a doodle bug
How fast does the it make the bike go? I’ve been looking to buy one for my mini bike!
Check out our vid on it! Ours goes 28 with a tight chain and governor!
A hemi Tops out at 40.71 on my db30r with the governor spring zip tied and 70t rear sprocket and the torque is fuckin crazy wheelie and burn out machine
Mine tops out at around 40 with just a pipe
I’ve got mine hittin 50 it honestly rips
How fast does it go
What size chain sprocket are you using? Infront and back?
I have a 212cc predator engine. Soon I’m going to put a cam and flywheel and dirt bike carburetor. I wonder how that’s going to play out but, you got a nice bike there man
hows it gone
Watz up man by any chances do u know what size brake disc are u running on that mini I have the same frame trying to figure it out any help thankz
Only 32 thumbs down wants to think they better than anyone eles ignore them nice bike
Appreciate it man
Did you take the governor off and like ohv carburetor version of this engine it's faster acceleration and are puting a header pipe on it
The engine is completely stock right now, we plan to build it though
I got a bt200x I wonder if it will work
What did you do far as brakes I'm running through brakes fast
A brake off of a bicycle
Can you drop the link of where u got the engine
Harbor freight look it up
jonas McGuire www.harborfreight.com/65-hp-212cc-ohv-horizontal-shaft-gas-engine-epa-69730.html
jonas McGuire it’s 2 different kind www.harborfreight.com/65-hp-212cc-ohv-horizontal-shaft-gas-engine-epacarb-69727.html
Please is it the th riddle touchy!
Yup
What kind of clutch did you use?, Like brand and want not
Just ordered one from online
I have exactly the same setup
Any info on suspension would be great. Was gonna try spring seats.
Hey man i’m having a problem with my 212cc where it will only start if i have it at full throttle and it wants take off every time I start it. Any fixes you know of?
Same problem here, only mine will start no matter what.
What’s up guys....HELLLOOOO!!!!!!
G G G G GUYYYZZZZZ
Just bought an old mini bike and ordered the same motor. Any surprises i should know about on the swap?
Pretty straight forward, only took me about 30 min to drill holes and install
where’d u buy your mini bike, trying to get one
I have a manco streaker with a 3.5 tecumseh I used to ride as a kid. I still have it. I’m thinking about putting this engine on it. I could get 30 mph with no governor with the Tecumseh. Just wondering if this 212 will fit on the streaker frame.
It should
Hey man I’m buying this engine in a few days what all do I need to make it rideable I have the exact same bike will I need new chains and a clutch?
Yes you’ll need a clutch that fits the 3/4 shaft and a bolt to mount it. I would recommend a good quality chain because this motor rips haha. Also, you might need a predator 212 bolt mounting kit, that’s what we used to mount it on
CW Outdoors ok thanks mana that helped a lot the clutch on the 97cc 2.8 horsepower will not work on this motor correct?
If it’s not a 3/4 inch shaft then no
What clutch?
Don't be too hard on these guy's . They just graduated from disney princes bikes, give them a few year's to get familiar with these pure death machines. It's like going from a ford pinto to a formula 1 car.
Haha buddy we rip 450s and 250 race bikes. We know our way around machines.
where did you buy the tires ?
The tires are the ones we bought it with, you can find some off amazon for cheap.
CW Outdoors what are they called ?
Pack of 2 145 70-6 Tires, 145/70-6 Tubeless Go Kart Street Mini Bike Tires www.amazon.com/dp/B078MJG5VQ/ref=cm_sw_r_cp_api_i_8n8GEbSNE13AP
Are these heavy
They weigh 100 pounds at the most, so not really
Just a tip. Stop dropping the bike. Motor is on its side. Oil will travel into places you do not want to be. And damage motor possibly.
What throttle is that?
Cheapest one on Amazon! 😂
WhAtS UP gUYs
I gotta ask if you order online does harbor freight ship predator engines to Canada or just America.
not sure
How many inches r the wheels
One time my grandpa did this and I flipped it and got a concussion
Oh man! They are little death traps for sure ahha
@@cwoutdoors4522yeah🤣 it took a while for me to get back on
my bike accelerate fast but as i drive it slows down and goes slow i have the predator engine on a 100cc coleman mini bike dose anyone know why?
That's your governor kicking in, take it out or bypass the governor to fix that problem.
Does anyone know the mileage on thsi motor? and how fast does it go?
We have a top speed video so check that out and it gets around 50 miles on a full tank
Me and my uncle have been trying to find a project like this to have some fun during quarantine, do you think this would be a good starter project for us?
Edit: also do you know what the least amount of money to make one of these would be?
I think it’d be great to do. I’d say a good build will set you back between 300-400 bucks
Do you know what the top speed was?
Ours is 28
How many teeth on the sprocket?
Anyone know good places to buy the bike without a motor
Check Facebook marketplace
The fuck is up with the throttle cable?
What’s the top speed
Go check out our video on it
Like I said, go check out our video
how does the motor and the chain work
We had to get a clutch for it
Clutch is on backwards
It’s not, you can put it either way, it guides it better