How to make an Acrylic Light Logo | DIY

I will show you how to make an acrylic led light logo. I am using a 3mm 17inch circle acrylic sheet (you can decide size and shape as per your requirement). I printed out the logo. turned it upside-down and paste on acrylic using scotch tape. I put the bulb inside the tire table that I made and placed the acrylic on it to see the shadow of logo and started cutting the protection film of acrylic using a knife cutter. I removed the protection film that I cut earlier, be gentle, try not to scratch the acrylic. after removing the protection film, scrub it to give it a logo shape. I am using sand paper, hacksaw blade and sander cone drill bit. Once you are done scrubbing use paint thinner for cleaning and to give it a smoother look. I measured the length of acrylic to design the base. I used 2 inch thick wood lath for the base and 1 inch thick 2 wood laths for holding the acrylic, I spray painted all three wood laths select color as per your requirement. cut the thermocol sheet same size as wood lath that is 17 inch and paste it on both 1-inch thick wood laths that will hold the acrylic using a glue gun. paste the led light on wooden base along with thermocol on both sides and then paste the 1-inch thick wood lath that will hold the acrylic on thermocol. I covered the logo on acrylic with a scotch or clear tape to protect it from spray paint, and painted the letters below it. I removed the protection film gently and place the acrylic on base and you're done
Remember to leave a Like👍 and Subscribe to the channel
*▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬*
FOLLOW ME ON INSTAGRAM:
/ muhammad_anas_benz
Like👍 the page on Facebook:
/ wepetrolheads
Watch DIY customizing tutorials below
• DIY how to customize c...
*Watch events and travelogues below:
• Travelogues and Events
Watch car facts and specs videos below :
• TOP 10 FUN FACTS
Please email/message me for business inquiries or if you want any video removed.
[e-mail]
#acrylic #acryliclogo #ledlight

[@alexanderoforah1107]

This is great job

[@Zerotolerance1212]

Superb vlog

[@Kracov_the_Madman]

I don't see how you're able to do this, but I hope you can help. I tried 2 different LED strips and they just can't properly light up my acrylic sign. Mostly it's a faint light near the top where the strip is.

[@ZESTBECKON]

Nice! Very nice!!!

[@WePetrolheads]

Thank you :)

[@warrenlawhorne]

I wonder if you had sanded the letters then painted them if they would pickup the light...?

[@hendowg713]

Great job

[@inventor_87]

Great 👍👍 bro

[@hventure]

nice DIY thanks man

[@WePetrolheads]

your welcome :)

[@javedtech1057]

Nice work sir mera acrylic letter ka kaam hai mera bhi channel hai videos banaya hai aap mujhe batao koi galti hai kya aap ka video mujhe bahot pasand aaya 👍👍👍👍😍👍👍👍

[@BatmansAccountofficial]

^ cool 👌

[@WePetrolheads]

Thank you Batman ^_^

[@hakotetv688]

Hi, will you be able to do one for my logo?