▼EXPAND FOR LINKS TO THE TOOLS▼ 🎥 Watch Next - SawStop CTS First Impressions - th-cam.com/video/TieBJVT5nBM/w-d-xo.html 🛠 Tools In This Video: SawStop Compact Jobsite Table Saw - shrsl.com/3v1ym Dewalt Jobsite Table Saw - amzn.to/3Cdooai Shirt I was wearing - www.shieldsofstrength.com/1-corinthians-13-shirt/ My favorite work boots (use code 731WOOD to get $10 off) bruntworkwear.com/731wood Camera Gear I Use - kit.co/731Woodworks/camera-gear-i-use Computer Equipment I Use - kit.co/731Woodworks/731-woodworks-computer-equipment Some of my Favorite Under $30 Tools DFM Square: amzn.to/3Jfb5H2 Thin Rip Jig: amzn.to/3LKm2lB DFM Saw Height Gauge: amzn.to/3jidia1 Small F-Clamps: lddy.no/157u9 (If you use one of these Amazon and other affiliate links, I may receive a commission) Some other useful links: Daily Tool Deals on my website: www.731woodworks.com/tool-deals Subscribe the 731 Newsletter: mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter Check out our easy-to-follow woodworking plans: www.731woodworks.com/store use code 5NEWTOOLS to save 20% off your order. Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter
It's really disappointing that you took 3 months to do a follow-up video, especially since you had the "fix" since September. If you're going to do reviews like this and want to be a trusted tool reviewer, you owe it to us (your subscribers) to be timely in your updates (especially since you teased that you'd do a follow-up once you figured out if it were a big deal). I had to find the Ron Paulk channel to figure out that this saw does what I needed it to do.
@@DanParisianBP Understood. Thanks Dan. In hindsite I should have put out a short follow up video. I wanted to use the saw for several weeks before doing a full review, which is why I waited.
The fact that you can save a hand/ fingers is priceless. I also have a jobsite dewalt but it scared me a few times last year. So my wife saw a video on TH-cam and I think it was you talking about what the government was doing about the many injuries of the table saw. I’m a diy guy and retired and would like to keep all of my fingers. Thanks for the video much appreciated ❤❤❤❤
Basically a few dollars more for a finger saving saw, so cheap, ask someone like me who has chopped off part of their thumb if thats too much money. The hospital bill was over $23000 dollars ,which is cheaper. I worked on table saws for 40 years without a scratch until the day I had a big scratch.
You can do the comparison, but I can almost predict the outcome, both saws will deliver an excellent end result. It all comes down to what you are prepared to pay for the additional safety...
Would love to see a comparison or just review on the Dewalt saw to see your opinion on it. I just sold my Kobalt saw and bought it, absolutely love it so far. I was going out of my way to avoid the Kobalt saw because the fence was so hard to keep square. The Dewalt saw was square out of the box and just feels so much better.
I have had my Dewalt for 5 years now, work it hard most days, and it has been a great tool with plenty of power. Try to be extremely cautious as it does not have the SawStop safety feature.
I literally just lived this comment two weeks ago. I bought the Kobalt table saw when I worked at Lowe's about 6 years ago and while it was a good saw overall, the fence was terrible. I was lucky enough to get the Dewalt compact saw for $269 on Amazon and sold my Kobalt for $250, no brainer.
Since purchasing the Ridgid 15-amp 10 in. pro jobsite table saw with stand. I haven't had any problems with it. I have cut down full sheets of 3/4" plywood and used it to cut 2x4 lumber for both my basic (hard duty) workbenches.
I am a little surprised that anyone would expect this to be a precision saw and it makes me like Sawstop even more that they'd come right out and say it. Well built and accurate, sure, and maybe this is semantics but it's a lunchbox jobsite saw with a rack and pinion fence (which I agree is great). Any professional using this on a jobsite likely has a cabinet saw, track saw and is paying for the safety feature. I can't imagine a scenario where I'm using this machine to make wide panel cuts that need to be incredibly accurate. Something like this is for scribing fillers, long rips on 1x material, maybe flooring rips, long miters etc. The Festool compact saw available overseas maxes out at like an 11 in rip capacity and doesn't even pretend like anything wider is part of someone's workflow. Personally I'd loosen those cams immediately if the rack and pinion is tight because I'm never extending the fence out that far. That would be the far greater annoyance to me. If I did do that kind of work on site I'd probably set it up in a Rousseau Portamax, a $400 accessory with a built in fence which would be a good option if you're a hobbyist and space is a consideration but you like the safety feature. You could also build it into a workbench and the table top would take away from the deflection or you could use an aftermarket fence. At that point however in terms of footprint and cost you might as well get the Jobsite Pro. That one folds up and rolls into a corner. I used to own that one years ago thinking it would replace my old Ridgid hybrid that I had some ambivalence towards (now I have a PCS in the garage and we have a couple of the DeWalt saws for site work) and it's a phenomenal saw. If I only had one table saw or pulled a trailer with a ramp I'd still own it, it's just too heavy to get in and out of a truck bed regularly. Both reviews have been very informative and I'm considering buying this but I'd be paying for the safety feature and that's it which seems to be the takeaway here anyway. I can see where a hobbyist would want this to be their only saw and that's definitely possible but I don't think that's who this saw is for. Unfortunately, it's not a Sawstop for someone who wants to save money, it's a Sawstop for someone who wants to spend even more money. If someone found some way to make a compact saw that wasn't an absolute screamer I'd buy that in a heartbeat - some jobsites are remodels. And on that note, one thing I would expect from a $1,000 saw is a dust port on the blade guard or at least an option as an accessory would be nice but maybe I missed that.
Agreed, making such a big deal about the fence wobble is such a non-issue for anyone that uses compact table saws. I'd just be happy to get more than my current ryobi 12" rip capacity. Looks like a pretty decent and well thought out unit, and you're paying for the safety feature which is fine by me.
I bought the SKIL 10" table saw you reviewed a few months ago. I considered pre-ordering this SawStop but for $900+ I could get the SKIL for $299 which has a rack and pinion fence with a high/low feature plus it takes a 5/8 Dado. I have no complaints with the SKIL after 4 months of daily use. I'd rather reinvest my money into materials or additional tools. I use the SKIL with the blade guard, paws and riving knife with a micro grip push block thus in theory as long as I'm paying attention to my hands, body placement and material the risk of an accident is low.
I'm mildly considering the Sawstop. The basic saw is only 20% more expensive than the Dewalt, but without the wheeled stand. This also appears to be better than the other Sawstop (portable) contractor saw and half the price. But there's also a store here that carries a rebranded Dewalt that goes on sale for 30% less than the Dewalt. I guess we'll see what happens in the spring when I can get back into the garage.
This is my exact scenario too. I wanted the saw stop really bad, but then ended up buying the skil after seeing his video on the saw stop. I spent an hour squaring it up and I've never looked back since. It's an awesome saw!
This is a perfect example of how important social media has become. After I saw your previous video, I decided not to purchase this saw for use in the field. I have the 52 inch professional saw in my home shop and love it. I appreciate the updated review and have to saw that I'm very surprised that Sawstop initially just told you that the issue with the fence was considered normal. After reviewing your updated video , this saw is again in my bucket list . The thing that really appeals to me is the size of the saw and the price is more affordable too. Thanks for your video's and have a Happy New Year.
This is a perfect example of what happens when you don’t educate your support reps and they issue erroneous information that can dramatically affect sales
Thanks for reviewing this. For how accurate it is in such a small footprint plus has the sawstop safety feature it seems really worth the price. My hands have always been my livelihood, I've made hundreds of thousands of dollars over my lifetime with my hands. The very first thing I did when I bought my bandsaw was look up bandsaw injuries. Looks like I'll be picking this up once I get back to work after my surgery.
Thank you for doing this review. This is the only table saw my hubby will let me purchase. So as hobbyist and furniture flipper I don’t need a huge saw but the safety features of SawStop make it worth the pain of the price.
My Milwaukee doesn't have that kind of play. It also takes a Dado stack, and it runs off a battery. And yes I use the Dado stack in my battery Saw. Because when I'm building cabinets in the mountains, and I'm 8hrs from the nearest paved road, I need something that can do everything. Saw stop needs to do better.
Sorry Matt. I have a dewalt dwe7491 that I paid $550 for and the only issue I had out of the box was the blade tilt was out by 1 degree. That took about 10 seconds to fix and is part of my initial setup checks. I would still expect more from a higher end saw from a company like sawstop. Pre shipping quality control is very important.
Thanks for the update. At a $600 difference I would go with the Dewalt and let my knowledge of using my tools safely protect my hands. Use a blade guard 99% of the time and practice proper skills.
I have a Dewalt also and it works just fine with a blade guard on. It amazing the number of TH-cam channels not using blade guards and taking the risk of injury, an unnecessary risk. Especially when the blade guard design now days allows you to remove and reinstall the guard so easily. Watch Stumpy Nubs he'll teach you how to use your table saw safely. Excellent instructor.
@@joewatts7942 Hey Joe, just wanted to tell you. I jumped over to your channel and listened to your hymn playlist. Very nice, a lot of really good hymns there. Thanks for putting that together. ~Pat
I'm personally using the Skil table saw and it's been fantastic. It's a third of the price of this saw and has the rack and pinion fence which makes perfect cuts every time. I like the safety feature of the Saw Stop but it doesn't justify the 3x price. I'd like to see a comparison video of all 3 if possible.
Agreed. I'm in the market for a 10" jobsite saw now, and have narrowed it down to those 3 (Skil, DeWalt, and SawStop). With the massive price spread ($300 / $600 / $900), I want to know if spending the extra money is worth it.
@@cottrelr Yeah, it's a tough call. The 3 way comparison would be great to see. I personally don't think the extra cost for the Dewalt or Saw Stop is worth it so that's why I went with the Skil. The Skil is fully adjustable and a real treat to use with the rack and pinion compared to my old cheap Craftsman. I used to dread cutting things on the table saw as it took forever to get the fence lined up just right. Now with the rack and pinion, it's a perfect cut every time. Regardless of which saw you pick, the rack and pinion fence is a game changer.
@@cottrelr I own two of the three plus the smaller DeWalt and a Sawstop PCS. Folding legs on the Skil are nice, and it functions just like the DeWalt but the one we have has issues with the fence staying parallel to the blade. Might be an easy adjustment but I haven't taken the time to mess with it yet. You said 10" but you can't beat the DeWalt 8 1/4 for price and portability - it's $270 on Amazon right now. Those 10" saws are noticeably bigger. Milwaukee M18 is basically identical if you want to go cordless. If portability isn't a big deal or it is and you use a trailer with a ramp the Sawstop Jobsite Pro is fantastic but it's like 90lbs. I had this saw for a bit but getting it in and out of a truck frequently was brutal. If you're trying to save space in a garage or something you can fold it up and put it against a wall. It's not cheap but neither is the CTS and both are terrible at cutting hot dogs.
@@cottrelr I'd checkout the skillsaw too ( SPT99 ) it's got a higher cut capacity and the wormdrive is pure power! I love the dewalt too. If you're on a budget the Skil or Hercules both offer great value for what you're getting. You can't go wrong with a rack and pinion.
I bought the DeWalt DWE7491RS last week and was really on the fence of returning it to replace it with the SawStop you have. After seeing your short video and this one I’m keeping the DeWalt. Thanks to your videos I avoided making a mistake. I know you know, but the plastic cams will wear off prematurely and you’ll have to replace them. Not what I was expecting from almost $1000 job site saw with a big brand name and it doesn’t even come with a stand on wheels . I’m also waiting to see a DeWalt vs SawStop table saw video. Thanks for sharing your experience.
A good in depth video showing the pros and the cons of this sawstop jobsite saw. I have just purchased and set up the evolution r255tbl+ jobsite saw that seems to have all the adjustments and accuracy and almost the exact same fence as the sawstop plus the evolution has a built in sledge. Apart from the sawstop it has all I need at a third of the price. I noticed that just like the evolution the sawstop comes with the push stick that is almost useless at preventing kickback.
I am thinking of buying this specific saw. After almost 30 years using a Sears brand saw i want something more precise and safe. Thanks for the review! It is expensive but i know it will last along time!
Like you said, the only benefit over the Dewalt is the safety feature (and I guess the miter adjustment is easier), but really, I could make a better fence with some aluminum extrusion and some linear bearings
Thanks for this, Matt. I just picked up one of these CTS and I had just as much slip, if not maybe a little more, in the rails as you did. It’s a little heartbreaking to have to adjust a $900 table saw as much as I did… but it’s dead-on now. For as annoying as adjusting it was, I’m grateful that the adjustments were not incredibly difficult to perform. Really appreciate your content… hope you’re doing well.
A 3-way comparison between the SawStop, Dewalt, and Skil table saw would be great. I have the Skil table saw partly because of your review of it. Would be great to see if the money saved is worth the difference in quality.
I chose the Skil TS6307-00. My Unisaw is of no use to me as it takes up too much space, have to have room for the EV as well. First job is to build fixtures and foldable supports. Going to love designing and building again.
I figured the vertical movement of the fence would not be an issue. The distance to the blade does not change by any practical amount. The piece will lay flat on the table for the 90 degree cut so the cut is the same with or without the vertical flex.
Thanks for the followup Matt. I'm glad I decided to go a different route as my concern was that it was exactly as they described, that it wasn't really a precision saw. I ended up picking up a nice Laguna F2 Fusion saw. Aside from the safety stuff it just seemed like it was too close to the saw I was replacing (which was a Dewalt with almost all of the same features putting aside the safety stuff).
Thank you for sharing your update on the fence issue. SawStop could have been more responsive in their reply. Stay safe, warm, happy and healthy. From Henrico County Virginia
Thanks for the update. I love the honesty. I think the Dewalt 7491 is the better comparison on price. I got an awesome deal on a refused delivery and love it takes a dado stack. It has a few shortcomings as most job site saws do, but as Tamar and others prove you CAN do fine woodworking with it. As for customer service, i hear its gone down since Festool bought them.
@@PriceyBuilt Agreed. He has the 8 1/4" DeWalt vs a 10" SawStop. He should really be comparing 10" saws. Throw the 10" Skil in the mix, and you have a wide price spread ($300 / $600 / $900). It would make for a really useful video.
If safety is your number one then this is your job site saw. Myself, I'll take 2 DeWalt 7491 and take my chances. I'm over 60 and can still count to 10.
I would like to see a comparison video. I'm curious to see if you're really just paying for the safety feature, or if the Sawstop has other advantages over more affordable saws like the Dewalt that more justify the price
Yes please do another video of the comparison between the two saws. Be nice to see the difference if you don't need to the expensive safety features. Thx again Matt
I agree with you Matt. I think it was wrong for Sawstop to say it's not supposed to be a precision table saw. Some people save years to get their own table saw for their shop. DeWalt and Milwaukee don't say that about their tools because they don't need to. It should not have been released until it was engineered to perfection.
Thank you for the update Matt! I’ll echo what’s been said already that it would be kinda cool to see a comparison between the Dewalt, Skil, and SawStop. Also, some of the comments here are just ridiculous... people have to understand there will be trade offs with everything... A jobsite table saw will be smaller, less powerful, and less precise than a high-end cabinet saw. A high-end cabinet saw is not going to be overly transportable to the jobsite. Figure out your individual situation and what you need, and go with that!
Early last year I cut my thumb on a DEWALT saw (totally my fault btw). After ER visit, 7 stitches, and follow up with a plastic surgeon, my bills were more than the cost of 4 SawStop saws. $900?! That’s peanuts!
Do you really believe you won't need any stitches if you run your thumb right into a spinning blade on ANY table saw? It won't be AS damaging on a sawstop, but it's still going to send you to the seamstress 🙂
@@jlester4892 I’ve seen many photos of SawStop cartridge brake caused by hand engagement, a bandage is what most needed. SS does give detailed instructions on how to properly set depth between teeth of blade and brake cartridge for optimal engagement.
@@jlester4892 Have you seen the SawStop demos? No, the damage done amounts to a nick. I don't have a SawStop but if I were buying today it would be a big consideration. BTW, the only time I got hurt on my TS, it was turned off. I dragged my forearm across the stopped blade. Doh!
After adjusting the fence I think to compensate for the stiffness of movement I'd say using a hand crank handle instead of a circular knob might solve the "annoyance" some
I agree with your assessment. Just because it's a "job site" saw, it should be just as good as a full table saw. Someone may purchase a job site saw that is limited on shop space but still wants the saw stop. Hopefully Saw stop will take this into consideration in future designs. Happy New Year!
You just described me and my 'every once in a while" hobby needs. I think I'll go with the DeWalt mobile saw/stand. Just waiting to see if it ever goes on sale!!
@@TheRealGOTdurrrred It's a very cheap saw with Saw Stop technology. They are just gauging with this overpriced basic saw leaning on their monopoly. Folks will buy it, of course.
I love my jobsite DeWalt 741 table saw. It's fence is fantastic and was practically perfect out of the box. And lots cheaper. That saw looks so chincy.
I’m dumbfounded that a SawStop employee said it wasn’t meant to be a precise saw😮. At that price I don’t think I’d say that. Looks like a good one to me though.
A couple of years ago I got into an argument with my DeWalt table saw. A nasty kickback got me sliced up pretty badly, but after the ER and surgery, I kept my fingers. One finger will never be quite right, but it serves as a safety reminder. I don't believe that the DeWalt was bad or at fault. Hey, kickbacks happen. My point in this post is that yes, I would love to have a nice SawStop table saw, but the cost makes it unlikely for that to happen.
I would like to see a comparison video. I have the Dewalt job site saw and have been very satisfied with its performance, so it would be interesting to hear someone with vastly more experienced opinions of it.
Please do a comparison between the job site saws DeWalt and SawStop. I like the way you go in depth with such an accurate and detailed comparison. Besides…..if I can save money on a new machine I can afford a new air filter . ❤that idea.
I think you do great comparison videos. I very much doubt I would purchase a SawStop for immediate future, I won't so short sighted as claim that day will never come.
Need more making videos. I love tool reviews. Infact I made a few Purchases because of your tool reviews save the money by seeing your videos. But I'm ready to see you actually cut up and make some things man I love that too. I still a fan and will continue to do so. Just sharing. Love to you
The blade safety feature on a workshop table saw is practical in a controlled environment with clean dry timber. On a job site, using damp lumber, especially in the colder parts of the world or tropical or very humid environments, that safety feature would be nothing but a bain. Every damp piece of lumber you touch to that blade ........oooops, there goes another $175 as well as the inconvenience. Anyhow, as soon as you mentioned dado incompatibility, that table saw was off the table. What were they thinking?
Two other major problems with some or most units: 1) arbor runout: I had to return the first unit because the blade wobbled like crazy. The new unit is better but far from perfect. 2) the top is NOT FLAT at all. Meaning I had to sand down the coating and some aluminum underneath with sand paper glued on a flat panel. At least it’s close to being flat around the blade now. In summary: you buy this saw for the safety features. Everything else is average jobsite quality.
I Bought Me A Miter Saw & I Had It A Year Now & I Have Had No Trouble With It At All. & I Didn't Pay No $800.00 For It. All I Payed Was 331.00 With Taxes It Came To 356.23 & The Thing I Like About It Is It's A Broshlesd & It's Cordless.
That sort of fence, which is similar to that on the Skil you reviewed and on the DeWalt it looks like, won't work with the sorts of jigs that slide over and along the fence. If you have any way to work around that, or have some sorts of jigs that will work with it, that could be a very useful video.
I actually just built a vertical cutting jig to go over this fence. It isn't perfect, the back flippy arm doesn't have support all the way up so I needed to be more careful about keeping the work piece fully stable, but it did still work. I was worried about the hinges or arms protruding, but I just gave myself 1/8" clearance over the top and didn't have an issue. I would definitely still prefer a beefier fence, but I do like the lock in of this one.
you can build a box over the OEM fence that basically straddles it, you can even remove the OEM push stick holder (2 screws), then add a center panel to add more stability.... then you can build any jig you want that rides the "secondary fence"
I imagine that they will operate pretty much the same except the addition of the safety feature on the sawstop. Maybe you'd discover something else by doing a comparison and/or test.
You were absolutely not wrong!! For that kind of money you should never have to go through what you went through. There are too many great job site saws on the market that cost less and are ready out of the box. Great review Matt and no shame in telling the truth.
Thanks for the overview of sawstop jobsite. I'd love to see a legit comparison between the two if its apples to apples, maybe doing the five cut test with each on half a dozen different types of materials. I'd also be interested in both fences being flexed at full extension, table construction/flex/flatness, differences in plates (zero clearance vs?), knife/blade removal, amp draw start up/under load and do they both come with stands or did you buy bare tool. Then the big ticket differences. Dado etc, zillions of 4/5 star reviews vs safety. Which would you pick if sawstop didn't have the safety? Would you choose different if it was going for jobsite use vs compact beginner hobbiest that wants/needs some precision. Did you say you spent around 300 for the 10" dewalt? This probably wouldn't have been soooooo long except I'll be buying one of these two soon for my first table saw and would love to see you crush a comparison. Thanks again.
The skil and DeWalt saws ARE more accurate though...with a better fence. You might need to level them a bit but you should get precision out of these tools still
Great video, and glad you sorted out the fence.... TheSawStop fence is a total rip off of the Dewalt DW745 fence, bet they purched the rights from Dewalt or are they part of the same overall corporation. Cheers Paul in the UK
There are several examples of manufacturers that make quality higher end goods that are well made and priced accordingly. They decide to go into a market with more volume of sales. The same level of engineering does not go into the equipment but the premium price does. An $899 should outperform a $300 saw right out of the box.
Love the safety feature, but for me, it doesn’t have enough features for the price. I think I’d rather get dewalt or Bosch. Would be awesome if all brands tried adopting this type of safety in their tools as well
don't think they can, it's patented by sawstop, even if sawstop licensed it to other brands it would probably drive up the price to match the actual sawstop saws anyway
I ran my left hand through a table saw when I was 16, removing several digits. Fortunately, I had a good surgeon that reattached everything and I only lost my thumb joint. Works well enough that I have a career on a keyboard. Having said that, I can't even justify the price on a Saw Stop. Then again, ain't nothing like being burned once to give you laser focus when using a saw.
The fact that "people" said he was lying about his, literally documented, customer service response....puts a VERY bad taste in my mouth with a saw this expensive.....never mind the response, itself. It's good that there's a fix for this original issue. But, that reply from SawStop is absolutely astonishing. It was a cross between "I don't know"....and "I don't care". And, it won't accept a Dado stack. No thank you, I'll stick with deWalt. *Kudos for making another video to address the issues though...that was a classy move.*
My Dewalt jobsite saw right out of the box was spot on..at a third of the price. Premium product still sending Harbor Freight quality miter gauge. Slow learners.
Most people are going to buy their own miter gauge anyway, regardless of what the manufacturer includes in the box. No reason to waste money shipping a high-end gauge that half of your customers are going to replace anyway.
I think personally a lot of people are pushing the issue, these units are designed to be portable just like any Dewalt or Milwaukee tablesaw they’re gonna get thrown around on her truck if you want something as precision then I think you should take the bigger one
Power question...... how does this saw perform cutting hardwoods? Primarily maple, cherry, oak and walnut. Is it powerful enough to effectively cut 8/4 hardwoods?
To be completely honest, I love mine. I normally use just about everything DeWalt but I've been very satisfied with my CTS so far. I think it's important to remember that as woodworkers, we can only get so precise before we start endlessly chasing 64s of an inch. Obviously I'm not pleased to see them claim that it's "not a precision tool" bc thats a pretty lame response to a very valid concern, but my guess is that this was primarily designed as a jobsite tool. If you want something that's going to get you within a hundred thou, you probably shouldn't be using this saw anyways to be fair.
@@vincentferrari like I said, the response claiming it wasn't a precision tool was lame and before he tightened up the rail, it was obviously not ideal for cutting material at that width. But once he tightened it up, it seemed to be more than reasonable in terms of precision for the work that most of us will be using it for.
I would find out what size skate wheel fits snug inside the arm, and replace the cam with the skate wheel and bearing. Get a harder skate wheel so it fits snug, and the adjustment knob will be easy to turn due to the bearing, all while the skate wheel fitting snug inside the arm.
I have a newer version Hercules table saw that has all the features u mentioned for the saw stop except the safety feature of course. From the factory it needed a slight adjustment with the fence, same adjustment as the saw stop. And for $349 on sale now. The rack and piñon fence was the reason I purchased. Has a 10” blade compared to dewalt over $600. Very pleased with it. Been using it for 9 months with no issues.
My Skil SPT99 jobsite saw has practically the same rack and pinion fence system. Been a great saw too, and love the motor and power it delivers. It's pretty nice, but at this point I need me some of that good old American cast iron. If that even exists anymore?
I have a Dewalt, which is very good, I can’t buy a sawstop in England they said the market wasn’t big enough, there nice saws but I don’t think I would buy a portable sawstop just to expensive .
Dear Mr. 731 would you kindly give us a full speed demo of this saw cutting 45 degree 2 layers of ¾ ply? No one shows this saws cutting ability it would one of a kind
I watched an Izzy Swan video on this saw and learned that you can't use this saw offgrid. The tech on it that stops the saw when you hand gets into the blade, also stops the saw when running on a generator. We're offgrid so it would never run for me.
While I like the idea of the extra safety , this is exactly the type of problem I don't want to have especially at that price. I purchased the Skil rolling table saw. It was set up from the factory spot on perfect out of the box and the rolling stand is beyond exceptional. Also considering I got it for Amazon days for three hundred off and when I sold my 10 year old Dewalt for $200 my final price was $190. Is the extra safety really worth that much extra money? I will stay with my Skil.
Thank you for investigating and reviewing this saw. I have been looking for such a product for my very small workshop. I see a lot of complaints from people saying they don’t want to pay $900 for this table saw vs. $300 for a non-SawStop saw. I don’t see it that way. To me, it’s $300 for a great compact table saw plus $600 for the extra safety. I figure that if I would cut a few fingers off, it would cost about $6,000 to reattach them, so 600 bucks is a bargain. Four guys I know have made hospital visits for woodworking injuries. Nothing as serious as having to reattach body parts, but enough for a hospital trip. It seems that the ones who are most confident that it won’t happen to them are the ones most likely to have an accident. It’s just a matter of time. I don’t want to take that chance. Thanks!
How much does locking the fence in place help to reduce play? I noticed in your other video, where you noticed the large play, that the fence adjustment was not locked. Would that have helped reduce the play some, or would it be not enough to make a difference in that case, with the cam not adjusted yet?
I had a mouse chew through the ribbon cable that goes from the brake cartridge to the motor gear box. It is a $20 don connex ribbon cable. However Saw Stop will not sell me the cable. They say I need to replace the entire motor/gear box at a price of $250
Hi. I'm just wondering why different brands release different types per region or country. For example, Bosch released a GSB 18V-55 combi drill in the UK/US with 55Nm torque but only released GSB 18V-50 in my country with 50Nm torque. What's the reason for this? Hope you can do a video regarding the reason why there are different releases per region/country. Thank you.
▼EXPAND FOR LINKS TO THE TOOLS▼
🎥 Watch Next - SawStop CTS First Impressions - th-cam.com/video/TieBJVT5nBM/w-d-xo.html
🛠 Tools In This Video:
SawStop Compact Jobsite Table Saw - shrsl.com/3v1ym
Dewalt Jobsite Table Saw - amzn.to/3Cdooai
Shirt I was wearing - www.shieldsofstrength.com/1-corinthians-13-shirt/
My favorite work boots (use code 731WOOD to get $10 off) bruntworkwear.com/731wood
Camera Gear I Use - kit.co/731Woodworks/camera-gear-i-use
Computer Equipment I Use - kit.co/731Woodworks/731-woodworks-computer-equipment
Some of my Favorite Under $30 Tools
DFM Square: amzn.to/3Jfb5H2
Thin Rip Jig: amzn.to/3LKm2lB
DFM Saw Height Gauge: amzn.to/3jidia1
Small F-Clamps: lddy.no/157u9
(If you use one of these Amazon and other affiliate links, I may receive a commission)
Some other useful links:
Daily Tool Deals on my website: www.731woodworks.com/tool-deals
Subscribe the 731 Newsletter: mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter
Check out our easy-to-follow woodworking plans: www.731woodworks.com/store use code 5NEWTOOLS to save 20% off your order.
Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter
No dado. Ok. What about box-joint blade pairs?
It's really disappointing that you took 3 months to do a follow-up video, especially since you had the "fix" since September. If you're going to do reviews like this and want to be a trusted tool reviewer, you owe it to us (your subscribers) to be timely in your updates (especially since you teased that you'd do a follow-up once you figured out if it were a big deal).
I had to find the Ron Paulk channel to figure out that this saw does what I needed it to do.
@@DanParisianBP Understood. Thanks Dan. In hindsite I should have put out a short follow up video. I wanted to use the saw for several weeks before doing a full review, which is why I waited.
The fact that you can save a hand/ fingers is priceless. I also have a jobsite dewalt but it scared me a few times last year. So my wife saw a video on TH-cam and I think it was you talking about what the government was doing about the many injuries of the table saw. I’m a diy guy and retired and would like to keep all of my fingers. Thanks for the video much appreciated ❤❤❤❤
Basically a few dollars more for a finger saving saw, so cheap, ask someone like me who has chopped off part of their thumb if thats too much money. The hospital bill was over $23000 dollars ,which is cheaper. I worked on table saws for 40 years without a scratch until the day I had a big scratch.
You can do the comparison, but I can almost predict the outcome, both saws will deliver an excellent end result. It all comes down to what you are prepared to pay for the additional safety...
Would love to see a comparison or just review on the Dewalt saw to see your opinion on it. I just sold my Kobalt saw and bought it, absolutely love it so far. I was going out of my way to avoid the Kobalt saw because the fence was so hard to keep square. The Dewalt saw was square out of the box and just feels so much better.
I have had my Dewalt for 5 years now, work it hard most days, and it has been a great tool with plenty of power. Try to be extremely cautious as it does not have the SawStop safety feature.
I literally just lived this comment two weeks ago. I bought the Kobalt table saw when I worked at Lowe's about 6 years ago and while it was a good saw overall, the fence was terrible. I was lucky enough to get the Dewalt compact saw for $269 on Amazon and sold my Kobalt for $250, no brainer.
I think you do a great job showing these tools, you really break it down! You have great presentation skills...you are a good teacher!!
Since purchasing the Ridgid 15-amp 10 in. pro jobsite table saw with stand. I haven't had any problems with it. I have cut down full sheets of 3/4" plywood and used it to cut 2x4 lumber for both my basic (hard duty) workbenches.
Please, please, please do a comparison. I'm a big DeWalt owner and would love to see the pros and cons of both. Thanks Matt, love your content
For $900 would it have killed them to have incorporated some bearings in a linear rail type fence system?
Replace the cam with a skate wheel with a cam bearing in it instead of regular bearing.
I mean it’s not really a $900 saw it’s more like a $300 saw with a $600 safety feature.
@@liquidrockaquatics3900$600 that will save your hands potentially
I am a little surprised that anyone would expect this to be a precision saw and it makes me like Sawstop even more that they'd come right out and say it. Well built and accurate, sure, and maybe this is semantics but it's a lunchbox jobsite saw with a rack and pinion fence (which I agree is great). Any professional using this on a jobsite likely has a cabinet saw, track saw and is paying for the safety feature. I can't imagine a scenario where I'm using this machine to make wide panel cuts that need to be incredibly accurate. Something like this is for scribing fillers, long rips on 1x material, maybe flooring rips, long miters etc. The Festool compact saw available overseas maxes out at like an 11 in rip capacity and doesn't even pretend like anything wider is part of someone's workflow. Personally I'd loosen those cams immediately if the rack and pinion is tight because I'm never extending the fence out that far. That would be the far greater annoyance to me.
If I did do that kind of work on site I'd probably set it up in a Rousseau Portamax, a $400 accessory with a built in fence which would be a good option if you're a hobbyist and space is a consideration but you like the safety feature. You could also build it into a workbench and the table top would take away from the deflection or you could use an aftermarket fence. At that point however in terms of footprint and cost you might as well get the Jobsite Pro. That one folds up and rolls into a corner. I used to own that one years ago thinking it would replace my old Ridgid hybrid that I had some ambivalence towards (now I have a PCS in the garage and we have a couple of the DeWalt saws for site work) and it's a phenomenal saw. If I only had one table saw or pulled a trailer with a ramp I'd still own it, it's just too heavy to get in and out of a truck bed regularly.
Both reviews have been very informative and I'm considering buying this but I'd be paying for the safety feature and that's it which seems to be the takeaway here anyway. I can see where a hobbyist would want this to be their only saw and that's definitely possible but I don't think that's who this saw is for. Unfortunately, it's not a Sawstop for someone who wants to save money, it's a Sawstop for someone who wants to spend even more money.
If someone found some way to make a compact saw that wasn't an absolute screamer I'd buy that in a heartbeat - some jobsites are remodels. And on that note, one thing I would expect from a $1,000 saw is a dust port on the blade guard or at least an option as an accessory would be nice but maybe I missed that.
Agreed, making such a big deal about the fence wobble is such a non-issue for anyone that uses compact table saws. I'd just be happy to get more than my current ryobi 12" rip capacity. Looks like a pretty decent and well thought out unit, and you're paying for the safety feature which is fine by me.
I bought the SKIL 10" table saw you reviewed a few months ago. I considered pre-ordering this SawStop but for $900+ I could get the SKIL for $299 which has a rack and pinion fence with a high/low feature plus it takes a 5/8 Dado. I have no complaints with the SKIL after 4 months of daily use. I'd rather reinvest my money into materials or additional tools. I use the SKIL with the blade guard, paws and riving knife with a micro grip push block thus in theory as long as I'm paying attention to my hands, body placement and material the risk of an accident is low.
I have the skil only use the riving knife only issue the knob to lock the riving knife broke
I'm mildly considering the Sawstop. The basic saw is only 20% more expensive than the Dewalt, but without the wheeled stand. This also appears to be better than the other Sawstop (portable) contractor saw and half the price. But there's also a store here that carries a rebranded Dewalt that goes on sale for 30% less than the Dewalt. I guess we'll see what happens in the spring when I can get back into the garage.
This is my exact scenario too. I wanted the saw stop really bad, but then ended up buying the skil after seeing his video on the saw stop. I spent an hour squaring it up and I've never looked back since. It's an awesome saw!
This is a perfect example of how important social media has become. After I saw your previous video, I decided not to purchase this saw for use in the field. I have the 52 inch professional saw in my home shop and love it. I appreciate the updated review and have to saw that I'm very surprised that Sawstop initially just told you that the issue with the fence was considered normal.
After reviewing your updated video , this saw is again in my bucket list . The thing that really appeals to me is the size of the saw and the price is more affordable too.
Thanks for your video's and have a Happy New Year.
This is a perfect example of what happens when you don’t educate your support reps and they issue erroneous information that can dramatically affect sales
Thanks for reviewing this. For how accurate it is in such a small footprint plus has the sawstop safety feature it seems really worth the price. My hands have always been my livelihood, I've made hundreds of thousands of dollars over my lifetime with my hands. The very first thing I did when I bought my bandsaw was look up bandsaw injuries. Looks like I'll be picking this up once I get back to work after my surgery.
Thank you for doing this review. This is the only table saw my hubby will let me purchase. So as hobbyist and furniture flipper I don’t need a huge saw but the safety features of SawStop make it worth the pain of the price.
Seriously, spend a few hundred more for the Jobsite Pro. It takes dados, has a better fence, and folds up on its own rolling frame.
My Milwaukee doesn't have that kind of play. It also takes a Dado stack, and it runs off a battery. And yes I use the Dado stack in my battery Saw. Because when I'm building cabinets in the mountains, and I'm 8hrs from the nearest paved road, I need something that can do everything. Saw stop needs to do better.
Dewalt doesnt have the saving fingers feature.
Sorry Matt. I have a dewalt dwe7491 that I paid $550 for and the only issue I had out of the box was the blade tilt was out by 1 degree. That took about 10 seconds to fix and is part of my initial setup checks. I would still expect more from a higher end saw from a company like sawstop. Pre shipping quality control is very important.
Thanks for the update. At a $600 difference I would go with the Dewalt and let my knowledge of using my tools safely protect my hands. Use a blade guard 99% of the time and practice proper skills.
I have a Dewalt also and it works just fine with a blade guard on. It amazing the number of TH-cam channels not using blade guards and taking the risk of injury, an unnecessary risk. Especially when the blade guard design now days allows you to remove and reinstall the guard so easily. Watch Stumpy Nubs he'll teach you how to use your table saw safely. Excellent instructor.
@@joewatts7942 Hey Joe, just wanted to tell you. I jumped over to your channel and listened to your hymn playlist. Very nice, a lot of really good hymns there. Thanks for putting that together. ~Pat
I'm personally using the Skil table saw and it's been fantastic. It's a third of the price of this saw and has the rack and pinion fence which makes perfect cuts every time. I like the safety feature of the Saw Stop but it doesn't justify the 3x price. I'd like to see a comparison video of all 3 if possible.
Agreed. I'm in the market for a 10" jobsite saw now, and have narrowed it down to those 3 (Skil, DeWalt, and SawStop). With the massive price spread ($300 / $600 / $900), I want to know if spending the extra money is worth it.
@@cottrelr Second this, looking at all 3 myself.
@@cottrelr Yeah, it's a tough call. The 3 way comparison would be great to see. I personally don't think the extra cost for the Dewalt or Saw Stop is worth it so that's why I went with the Skil. The Skil is fully adjustable and a real treat to use with the rack and pinion compared to my old cheap Craftsman. I used to dread cutting things on the table saw as it took forever to get the fence lined up just right. Now with the rack and pinion, it's a perfect cut every time. Regardless of which saw you pick, the rack and pinion fence is a game changer.
@@cottrelr I own two of the three plus the smaller DeWalt and a Sawstop PCS.
Folding legs on the Skil are nice, and it functions just like the DeWalt but the one we have has issues with the fence staying parallel to the blade. Might be an easy adjustment but I haven't taken the time to mess with it yet.
You said 10" but you can't beat the DeWalt 8 1/4 for price and portability - it's $270 on Amazon right now. Those 10" saws are noticeably bigger. Milwaukee M18 is basically identical if you want to go cordless.
If portability isn't a big deal or it is and you use a trailer with a ramp the Sawstop Jobsite Pro is fantastic but it's like 90lbs. I had this saw for a bit but getting it in and out of a truck frequently was brutal. If you're trying to save space in a garage or something you can fold it up and put it against a wall. It's not cheap but neither is the CTS and both are terrible at cutting hot dogs.
@@cottrelr I'd checkout the skillsaw too ( SPT99 ) it's got a higher cut capacity and the wormdrive is pure power! I love the dewalt too. If you're on a budget the Skil or Hercules both offer great value for what you're getting. You can't go wrong with a rack and pinion.
I bought the DeWalt DWE7491RS last week and was really on the fence of returning it to replace it with the SawStop you have. After seeing your short video and this one I’m keeping the DeWalt.
Thanks to your videos I avoided making a mistake.
I know you know, but the plastic cams will wear off prematurely and you’ll have to replace them. Not what I was expecting from almost $1000 job site saw with a big brand name and it doesn’t even come with a stand on wheels .
I’m also waiting to see a DeWalt vs SawStop table saw video.
Thanks for sharing your experience.
This is not their job site saw though, that one is $1500.
A good in depth video showing the pros and the cons of this sawstop jobsite saw. I have just purchased and set up the evolution r255tbl+ jobsite saw that seems to have all the adjustments and accuracy and almost the exact same fence as the sawstop plus the evolution has a built in sledge. Apart from the sawstop it has all I need at a third of the price. I noticed that just like the evolution the sawstop comes with the push stick that is almost useless at preventing kickback.
I am thinking of buying this specific saw. After almost 30 years using a Sears brand saw i want something more precise and safe. Thanks for the review! It is expensive but i know it will last along time!
Like you said, the only benefit over the Dewalt is the safety feature (and I guess the miter adjustment is easier), but really, I could make a better fence with some aluminum extrusion and some linear bearings
Thanks for this, Matt. I just picked up one of these CTS and I had just as much slip, if not maybe a little more, in the rails as you did. It’s a little heartbreaking to have to adjust a $900 table saw as much as I did… but it’s dead-on now. For as annoying as adjusting it was, I’m grateful that the adjustments were not incredibly difficult to perform.
Really appreciate your content… hope you’re doing well.
A 3-way comparison between the SawStop, Dewalt, and Skil table saw would be great. I have the Skil table saw partly because of your review of it. Would be great to see if the money saved is worth the difference in quality.
Been awhile since I've watched, So glad to see your channel grow from a few thousand to nearly half a million. keep producing good stuff!!!
I chose the Skil TS6307-00. My Unisaw is of no use to me as it takes up too much space, have to have room for the EV as well. First job is to build fixtures and foldable supports. Going to love designing and building again.
I figured the vertical movement of the fence would not be an issue. The distance to the blade does not change by any practical amount. The piece will lay flat on the table for the 90 degree cut so the cut is the same with or without the vertical flex.
Yes, please do make a comparison on the two table saws. I'm looking at a Dewalt table saw but I do like the safety feature on Saw Stop.
Thanks for the followup Matt. I'm glad I decided to go a different route as my concern was that it was exactly as they described, that it wasn't really a precision saw. I ended up picking up a nice Laguna F2 Fusion saw. Aside from the safety stuff it just seemed like it was too close to the saw I was replacing (which was a Dewalt with almost all of the same features putting aside the safety stuff).
Thank you for sharing your update on the fence issue. SawStop could have been more responsive in their reply. Stay safe, warm, happy and healthy. From Henrico County Virginia
Thanks for the update. I love the honesty. I think the Dewalt 7491 is the better comparison on price. I got an awesome deal on a refused delivery and love it takes a dado stack. It has a few shortcomings as most job site saws do, but as Tamar and others prove you CAN do fine woodworking with it. As for customer service, i hear its gone down since Festool bought them.
100% The Dewalt he has is completely the wrong model for a comparison.
@@PriceyBuilt Agreed. He has the 8 1/4" DeWalt vs a 10" SawStop. He should really be comparing 10" saws.
Throw the 10" Skil in the mix, and you have a wide price spread ($300 / $600 / $900). It would make for a really useful video.
I currently have the Dewalt. I’ve had for several years. Really a nice saw. However at this price point I’m upgrading. My fingers are priceless!
If safety is your number one then this is your job site saw. Myself, I'll take 2 DeWalt 7491 and take my chances. I'm over 60 and can still count to 10.
I have the Skil compact table saw and really like it; no issues at all. 😊This saw is just too pricey for my budget. Thanks for your review.
I would like to see a comparison video. I'm curious to see if you're really just paying for the safety feature, or if the Sawstop has other advantages over more affordable saws like the Dewalt that more justify the price
Yes please do another video of the comparison between the two saws. Be nice to see the difference if you don't need to the expensive safety features. Thx again Matt
I agree with you Matt. I think it was wrong for Sawstop to say it's not supposed to be a precision table saw. Some people save years to get their own table saw for their shop. DeWalt and Milwaukee don't say that about their tools because they don't need to. It should not have been released until it was engineered to perfection.
Thank you for the update Matt! I’ll echo what’s been said already that it would be kinda cool to see a comparison between the Dewalt, Skil, and SawStop.
Also, some of the comments here are just ridiculous... people have to understand there will be trade offs with everything...
A jobsite table saw will be smaller, less powerful, and less precise than a high-end cabinet saw. A high-end cabinet saw is not going to be overly transportable to the jobsite.
Figure out your individual situation and what you need, and go with that!
I still think, that part of the reason for them to enter the job site saw market, was to extend their patents which some of which are about to expire
Early last year I cut my thumb on a DEWALT saw (totally my fault btw).
After ER visit, 7 stitches, and follow up with a plastic surgeon, my bills were more than the cost of 4 SawStop saws.
$900?! That’s peanuts!
Do you really believe you won't need any stitches if you run your thumb right into a spinning blade on ANY table saw? It won't be AS damaging on a sawstop, but it's still going to send you to the seamstress 🙂
@@jlester4892 I’ve seen many photos of SawStop cartridge brake caused by hand engagement, a bandage is what most needed.
SS does give detailed instructions on how to properly set depth between teeth of blade and brake cartridge for optimal engagement.
@@jlester4892 Have you seen the SawStop demos? No, the damage done amounts to a nick. I don't have a SawStop but if I were buying today it would be a big consideration.
BTW, the only time I got hurt on my TS, it was turned off. I dragged my forearm across the stopped blade. Doh!
Thanks for the review. I would suggest you might use the Dewalt 7491RS if you want to compare to the Saw Stop CTS.
After adjusting the fence I think to compensate for the stiffness of movement I'd say using a hand crank handle instead of a circular knob might solve the "annoyance" some
I agree with your assessment. Just because it's a "job site" saw, it should be just as good as a full table saw. Someone may purchase a job site saw that is limited on shop space but still wants the saw stop. Hopefully Saw stop will take this into consideration in future designs. Happy New Year!
You just described me and my 'every once in a while" hobby needs. I think I'll go with the DeWalt mobile saw/stand. Just waiting to see if it ever goes on sale!!
@@TheRealGOTdurrrred It's a very cheap saw with Saw Stop technology. They are just gauging with this overpriced basic saw leaning on their monopoly. Folks will buy it, of course.
Yes please do a comparison video Matt. I owe the 8 1/4 dewalt jobsite saw i would like very much to know which is better
I love my jobsite DeWalt 741 table saw. It's fence is fantastic and was practically perfect out of the box. And lots cheaper. That saw looks so chincy.
I’m dumbfounded that a SawStop employee said it wasn’t meant to be a precise saw😮. At that price I don’t think I’d say that. Looks like a good one to me though.
@@TheRealGOTdurrrred I agree but I wouldn’t say that as a company like SawStop
A couple of years ago I got into an argument with my DeWalt table saw. A nasty kickback got me sliced up pretty badly, but after the ER and surgery, I kept my fingers. One finger will never be quite right, but it serves as a safety reminder. I don't believe that the DeWalt was bad or at fault. Hey, kickbacks happen. My point in this post is that yes, I would love to have a nice SawStop table saw, but the cost makes it unlikely for that to happen.
I ran the Dewalt 10" for years! I would love to see how it compares to the Saw Stop.
Yes! Please do a comparison of job site saws compared to the Saw Stop job site saw
It's on the channel now.
I would like to see a comparison video. I have the Dewalt job site saw and have been very satisfied with its performance, so it would be interesting to hear someone with vastly more experienced opinions of it.
Please do a comparison between the job site saws DeWalt and SawStop. I like the way you go in depth with such an accurate and detailed comparison. Besides…..if I can save money on a new machine I can afford a new air filter . ❤that idea.
It's on the channel now
I think you do great comparison videos. I very much doubt I would purchase a SawStop for immediate future, I won't so short sighted as claim that day will never come.
Need more making videos. I love tool reviews. Infact I made a few Purchases because of your tool reviews save the money by seeing your videos. But I'm ready to see you actually cut up and make some things man I love that too.
I still a fan and will continue to do so.
Just sharing. Love to you
The blade safety feature on a workshop table saw is practical in a controlled environment with clean dry timber.
On a job site, using damp lumber, especially in the colder parts of the world or tropical or very humid environments, that safety feature would be nothing but a bain. Every damp piece of lumber you touch to that blade ........oooops, there goes another $175 as well as the inconvenience.
Anyhow, as soon as you mentioned dado incompatibility, that table saw was off the table.
What were they thinking?
Yes I would also love to see a comparison for the jobsite tablesaw, I have a Dewalt and I would love to see that comparison
Two other major problems with some or most units:
1) arbor runout: I had to return the first unit because the blade wobbled like crazy. The new unit is better but far from perfect.
2) the top is NOT FLAT at all. Meaning I had to sand down the coating and some aluminum underneath with sand paper glued on a flat panel. At least it’s close to being flat around the blade now.
In summary: you buy this saw for the safety features. Everything else is average jobsite quality.
I Bought Me A Miter Saw & I Had
It A Year Now & I Have Had
No Trouble With It At All.
& I Didn't Pay No $800.00
For It. All I Payed Was 331.00
With Taxes It Came To
356.23 & The Thing I Like About
It Is It's A Broshlesd & It's
Cordless.
That sort of fence, which is similar to that on the Skil you reviewed and on the DeWalt it looks like, won't work with the sorts of jigs that slide over and along the fence. If you have any way to work around that, or have some sorts of jigs that will work with it, that could be a very useful video.
I actually just built a vertical cutting jig to go over this fence. It isn't perfect, the back flippy arm doesn't have support all the way up so I needed to be more careful about keeping the work piece fully stable, but it did still work.
I was worried about the hinges or arms protruding, but I just gave myself 1/8" clearance over the top and didn't have an issue.
I would definitely still prefer a beefier fence, but I do like the lock in of this one.
you can build a box over the OEM fence that basically straddles it, you can even remove the OEM push stick holder (2 screws), then add a center panel to add more stability.... then you can build any jig you want that rides the "secondary fence"
Perhaps a small amount of Dry Lube would help with sliding the fence more smoothly. Supposed to be dust resistant.
I imagine that they will operate pretty much the same except the addition of the safety feature on the sawstop. Maybe you'd discover something else by doing a comparison and/or test.
You were absolutely not wrong!! For that kind of money you should never have to go through what you went through. There are too many great job site saws on the market that cost less and are ready out of the box. Great review Matt and no shame in telling the truth.
Would like to see the comparison between saw stop and dewalt.
Thanks for the overview of sawstop jobsite. I'd love to see a legit comparison between the two if its apples to apples, maybe doing the five cut test with each on half a dozen different types of materials. I'd also be interested in both fences being flexed at full extension, table construction/flex/flatness, differences in plates (zero clearance vs?), knife/blade removal, amp draw start up/under load and do they both come with stands or did you buy bare tool. Then the big ticket differences. Dado etc, zillions of 4/5 star reviews vs safety. Which would you pick if sawstop didn't have the safety? Would you choose different if it was going for jobsite use vs compact beginner hobbiest that wants/needs some precision. Did you say you spent around 300 for the 10" dewalt? This probably wouldn't have been soooooo long except I'll be buying one of these two soon for my first table saw and would love to see you crush a comparison. Thanks again.
The skil and DeWalt saws ARE more accurate though...with a better fence. You might need to level them a bit but you should get precision out of these tools still
I would love to have the PCS from SawStop. I don’t think this jobsite version is one that I would be interested in though.
Great video, and glad you sorted out the fence.... TheSawStop fence is a total rip off of the Dewalt DW745 fence, bet they purched the rights from Dewalt or are they part of the same overall corporation. Cheers Paul in the UK
There are several examples of manufacturers that make quality higher end goods that are well made and priced accordingly. They decide to go into a market with more volume of sales. The same level of engineering does not go into the equipment but the premium price does. An $899 should outperform a $300 saw right out of the box.
Great follow-up video. I would love to see the DeWalt vs SawStop comparison.
I would be interested in your opinion of the comparison between the Saw stop and the DeWalt.
Love the safety feature, but for me, it doesn’t have enough features for the price. I think I’d rather get dewalt or Bosch.
Would be awesome if all brands tried adopting this type of safety in their tools as well
don't think they can, it's patented by sawstop, even if sawstop licensed it to other brands it would probably drive up the price to match the actual sawstop saws anyway
I ran my left hand through a table saw when I was 16, removing several digits. Fortunately, I had a good surgeon that reattached everything and I only lost my thumb joint. Works well enough that I have a career on a keyboard.
Having said that, I can't even justify the price on a Saw Stop.
Then again, ain't nothing like being burned once to give you laser focus when using a saw.
The fact that "people" said he was lying about his, literally documented, customer service response....puts a VERY bad taste in my mouth with a saw this expensive.....never mind the response, itself. It's good that there's a fix for this original issue. But, that reply from SawStop is absolutely astonishing. It was a cross between "I don't know"....and "I don't care". And, it won't accept a Dado stack. No thank you, I'll stick with deWalt. *Kudos for making another video to address the issues though...that was a classy move.*
My Dewalt jobsite saw right out of the box was spot on..at a third of the price. Premium product still sending Harbor Freight quality miter gauge. Slow learners.
Most people are going to buy their own miter gauge anyway, regardless of what the manufacturer includes in the box. No reason to waste money shipping a high-end gauge that half of your customers are going to replace anyway.
I think personally a lot of people are pushing the issue, these units are designed to be portable just like any Dewalt or Milwaukee tablesaw they’re gonna get thrown around on her truck if you want something as precision then I think you should take the bigger one
Happy new year to you and your family!
Happy new year!
Power question...... how does this saw perform cutting hardwoods? Primarily maple, cherry, oak and walnut. Is it powerful enough to effectively cut 8/4 hardwoods?
It does well. Obviously not as good as a cabinet saw, but for this size saw, it has good power.
Yes, absolutely yes do a comparison video. Please and thank you.
To be completely honest, I love mine. I normally use just about everything DeWalt but I've been very satisfied with my CTS so far. I think it's important to remember that as woodworkers, we can only get so precise before we start endlessly chasing 64s of an inch. Obviously I'm not pleased to see them claim that it's "not a precision tool" bc thats a pretty lame response to a very valid concern, but my guess is that this was primarily designed as a jobsite tool. If you want something that's going to get you within a hundred thou, you probably shouldn't be using this saw anyways to be fair.
Looked like a lot more play than a hundred thou to me 🤷♂️
@@vincentferrari like I said, the response claiming it wasn't a precision tool was lame and before he tightened up the rail, it was obviously not ideal for cutting material at that width. But once he tightened it up, it seemed to be more than reasonable in terms of precision for the work that most of us will be using it for.
Matt, Amy Have a Prosperous and Happy New Year... Thanks for the videos and Knowledge transfer.
Happy New Year!
I've been happy with my Dewalt 8.25" for $300. Also it's $199 w/stand at Tractor Supply!!!!
My Bosch GTS 10 XC Professional table saw is rock solid straight from the box.
I would find out what size skate wheel fits snug inside the arm, and replace the cam with the skate wheel and bearing. Get a harder skate wheel so it fits snug, and the adjustment knob will be easy to turn due to the bearing, all while the skate wheel fitting snug inside the arm.
I have a newer version Hercules table saw that has all the features u mentioned for the saw stop except the safety feature of course. From the factory it needed a slight adjustment with the fence, same adjustment as the saw stop. And for $349 on sale now. The rack and piñon fence was the reason I purchased. Has a 10” blade compared to dewalt over $600. Very pleased with it. Been using it for 9 months with no issues.
My Skil SPT99 jobsite saw has practically the same rack and pinion fence system. Been a great saw too, and love the motor and power it delivers. It's pretty nice, but at this point I need me some of that good old American cast iron. If that even exists anymore?
I have a Dewalt, which is very good, I can’t buy a sawstop in England they said the market wasn’t big enough, there nice saws but I don’t think I would buy a portable sawstop just to expensive .
Dear Mr. 731 would you kindly give us a full speed demo of this saw cutting 45 degree 2 layers of ¾ ply? No one shows this saws cutting ability it would one of a kind
I watched an Izzy Swan video on this saw and learned that you can't use this saw offgrid. The tech on it that stops the saw when you hand gets into the blade, also stops the saw when running on a generator. We're offgrid so it would never run for me.
I'm 2 minutes in, and all you've done so far is convince me my apathy toward SawStop is still justified. I'll finish the video now. :)
What about using some silicone or lithium spray when you snug the fence.
Ya I don’t use millimeters either😛😝 Great review always enjoy your videos they are very informative thank you keep them coming.
While I like the idea of the extra safety , this is exactly the type of problem I don't want to have especially at that price. I purchased the Skil rolling table saw. It was set up from the factory spot on perfect out of the box and the rolling stand is beyond exceptional. Also considering I got it for Amazon days for three hundred off and when I sold my 10 year old Dewalt for $200 my final price was $190. Is the extra safety really worth that much extra money? I will stay with my Skil.
Comparison would be awesome! Thank you!
Thank you for investigating and reviewing this saw. I have been looking for such a product for my very small workshop.
I see a lot of complaints from people saying they don’t want to pay $900 for this table saw vs. $300 for a non-SawStop saw.
I don’t see it that way. To me, it’s $300 for a great compact table saw plus $600 for the extra safety. I figure that if I would cut a few fingers off, it would cost about $6,000 to reattach them, so 600 bucks is a bargain.
Four guys I know have made hospital visits for woodworking injuries. Nothing as serious as having to reattach body parts, but enough for a hospital trip. It seems that the ones who are most confident that it won’t happen to them are the ones most likely to have an accident. It’s just a matter of time. I don’t want to take that chance.
Thanks!
How much does locking the fence in place help to reduce play? I noticed in your other video, where you noticed the large play, that the fence adjustment was not locked. Would that have helped reduce the play some, or would it be not enough to make a difference in that case, with the cam not adjusted yet?
Thanks for the info Matt. Happy New Year!!!🎆
I had a mouse chew through the ribbon cable that goes from the brake cartridge to the motor gear box. It is a $20 don connex ribbon cable. However Saw Stop will not sell me the cable. They say I need to replace the entire motor/gear box at a price of $250
Hola! 🖐Good video, lots of detail explanation. Definitely a comparison video. Take care and have a good one, Adios!👊
Please do the review on both saws! I’ve got the exact other saw!
I would put some paste wax on the inside of that track to make it slide smoother while keeping the cam tightened up
Was about to pull the trigger on it for 400 more then the dewalt but the no dato stack is a deal breaker
Hi. I'm just wondering why different brands release different types per region or country. For example, Bosch released a GSB 18V-55 combi drill in the UK/US with 55Nm torque but only released GSB 18V-50 in my country with 50Nm torque. What's the reason for this? Hope you can do a video regarding the reason why there are different releases per region/country. Thank you.