Great review, Jeff. It's nice to hear from someone who has actually used a piece of equipment instead of receiving it and just going over features. Bill
We use that as our job site saw and I didn’t realize that support wing was integrated into the fence.. we’ve done so many dumb work arounds up until this point… thank you!
It's like we're having a conversation! You're turning that nob on the fence and I'm saying to myself "what does that do?" and 2 seconds later you say "to be honest I don't know what this does " Almost fell out my chair.
I’ve had my SawStop job site table saw for about a year. I love it, changing out the blades for a dado stack is easy. Changing out the cartridges is also quick and easy. You can dial in the angle if you use a digital angle gauge with the knob on the far right of the saw it has plus & minus you can fine tune the angle.
Have you had any issues with rip fence accuracy? I'm used to a rack and pinion fence and I'm skeptical on that style of fence staying parallel to the blade.
It’s the same style fence as nearly every cabinet saw so I’d say the design is pretty well tested. You won’t find a rack and pinion fence on a cabinet saw.
Question: Does your tablesaw, have a lot of slop when locking down the fence. Mine does and I've seen on Reddit that some other folks also have issues with the fence staying in place because the right wing doesn't fully lock. I have about 1/16 of play when the right wing is locked. Any suggestions if you are experiencing this issue?
@@TodaysCraftsmenit will take a dado but you will need to get a dado break as the single blade break isn’t strong enough for a dado stack. I have the same table saw and love it, now I am going to go and switch the handles the other way like you have it… dang good idea.
Is Rob still doing the podcast? If he’s not I’m gonna miss his laugh. lol I started the podcast from the beginning a few weeks ago. Glad to see it’s back.
@@TodaysCraftsmen I had no idea. Well pass on my congratulations on retirement and enjoy whatever comes next in life. Definitely gonna miss him, but glad to see John stepping in as well. 🍺 here’s to the future.
Great review, Jeff. It's nice to hear from someone who has actually used a piece of equipment instead of receiving it and just going over features.
Bill
Thanks, Bill. I hope someday we can be the guys getting those tools 😝
I've got that saw for my small garage shop. Had it for about the same time you've had yours. Works great. Love it.
Right on! 🙌🏼🙌🏼🙌🏼
Thanks guys. Informative and enjoyable!
Glad you enjoyed it!
We use that as our job site saw and I didn’t realize that support wing was integrated into the fence.. we’ve done so many dumb work arounds up until this point… thank you!
No problem! We learned ourselves 😝
It's like we're having a conversation! You're turning that nob on the fence and I'm saying to myself "what does that do?" and 2 seconds later you say "to be honest I don't know what this does " Almost fell out my chair.
😂😂😂 if we’re anything it’s honest.
Very informative Jeff & that looks like a really nice portable table saw! 👍👍
Thanks, Steve!
Saturday Morning Coffee with Today’s Craftsmen. Another educational video, thanks, guys!
Yeah, baby! Thanks for tuning in! 🙌🏼
I’ve had my SawStop job site table saw for about a year. I love it, changing out the blades for a dado stack is easy. Changing out the cartridges is also quick and easy. You can dial in the angle if you use a digital angle gauge with the knob on the far right of the saw it has plus & minus you can fine tune the angle.
Yes! We noticed that fine adjustment knob right after wrapping up filming! Funny I never noticed it before that day.
To prevent the fence from moving when you’re locking it down, slightly pull it forward as you’re locking it down.
Good tip!
THANKS FOR ANOTHER GREAT VIDEO.
He posted the video 3 min ago. The video is 10 min long. Ladies and gentlemen this m f is not real.
Our pleasure!
😂😂😂 🕵️♂️
That saw was a joy to use at Makers Camp last year ripping all that walnut down. Someday I’ll upgrade the Dewalt jobsite saw to this one.
It’s definitely a quality jobsite saw!
Great video Thanks for sharing
Thanks for watching!
Have you had any issues with rip fence accuracy? I'm used to a rack and pinion fence and I'm skeptical on that style of fence staying parallel to the blade.
It’s the same style fence as nearly every cabinet saw so I’d say the design is pretty well tested. You won’t find a rack and pinion fence on a cabinet saw.
Question: Does your tablesaw, have a lot of slop when locking down the fence. Mine does and I've seen on Reddit that some other folks also have issues with the fence staying in place because the right wing doesn't fully lock. I have about 1/16 of play when the right wing is locked. Any suggestions if you are experiencing this issue?
Like play before you lock it down (I.e. trying to nail your measurement,) or play after it’s locked down?
It looks like it has a big enough arbour to put a dado stack on that. Have you ever used one in there?
I have not but it will accept one!
@@TodaysCraftsmenit will take a dado but you will need to get a dado break as the single blade break isn’t strong enough for a dado stack.
I have the same table saw and love it, now I am going to go and switch the handles the other way like you have it… dang good idea.
Great info! 🙌🏼🙌🏼🙌🏼
Good stuff
Thanks, Rick! 👍🏼
Is Rob still doing the podcast? If he’s not I’m gonna miss his laugh. lol I started the podcast from the beginning a few weeks ago. Glad to see it’s back.
Rob retired back in February. I’m sure he’ll make a guest appearance every now and then but Jon and I are going to do it every week now.
@@TodaysCraftsmen I had no idea. Well pass on my congratulations on retirement and enjoy whatever comes next in life. Definitely gonna miss him, but glad to see John stepping in as well. 🍺 here’s to the future.
🍻🍻🍻
It's very similar to the Ridgid job site saw minus the flesh sensing tech...🤘🤘🤘
Very cool! 👍🏼
no eye protection while cutting? lol
Not always. You do you.
hello, how do I contact u? I didnt see your info
Via Instagram