How to Fix Commercial Fryers | eTundra
ฝัง
- เผยแพร่เมื่อ 4 ก.ค. 2013
- When a fryer breaks-down, there are 4 common parts that can help get it up and running again. We'll walk you through them all.
Shop commercial deep fryers: bit.ly/1Z6p8AR
Visit the blog for more information: bit.ly/22Lprpe
Follow us!
Facebook: / tundrarestaurantsupply
Twitter: / etundra
Linked In: / tundra-restaurant-supply
Google+: plus.google.com/+TundraRestau...
Pinterest: / etundra - แนวปฏิบัติและการใช้ชีวิต
Jumping high limit that was hard to follow. I knew what you were saying. But a person new might have some problems.
tq sir for your tips… now i have trouble pilot not lighting…
Have you had experience with Dean deep fryers ? Someone recommended that we get one instead of a frymaster ?
I’ve got a fry master fryer pilot light stays on but only one if burner lights and other five won’t light. But they will if you light them direct. Staying on only for few seconds after lightning them all and goes out
here in Austin I've found many "NG" fryers not working in food trucks because they've been connected to LP (liquid propane)!!! and the $350 NG valve is now busted. :(
one time a fancy bbq outfit had me come to ACL to work on their 6 fryers they had brought there. all were NG! and all but one NG valve survived being connected to propane. plus labor, that single oversight cost them 450 times 5. very sad... hard to break the news to them that 5 valves were busted. :( if you have a food truck make sure your regulators and valves are up to spec. oh and account for airflow to your condenser on your refrigeration. A lot of food truck builders don't factor that in... you can route fan to pull air out or you can install an external vent on the side of food cart or you can pull that unit away from wall 4 to 6 inches... your choice.
I have an older pitch fryer the pilot comes on but the burner doesn't light
Thanks for the video
Thanks!
Our fryer always has an issue with turning on mostly when we change it’s oil. A repairman came and said all it needed was to be reset” but that never works and always started up randomly after a while it sometimes instantly. He mentioned maybe there was oil in the starter? No idea what it where that is.
I'm looking for some help on how to clean the back of the deep fryer the bucket that sits in the back mine is full of debris
Hi, we have same model of Frymaster MJ35. I already change the operating thermostat but still don't
shuts off on the set temperature. Turns off only on 425 degrees.
at 2:00, what type of wires are these? do they vary by models? Thanks
What if the pilot lite lights but doesnt hold and connect with ths gas
Hello, I would like to know more about the Flume burner.
I have a ( dean) MDL sr142 GP One of the burners has a bunch of black carbon buildup clogging one. Can this be fixed? and why is this doing this?
What about electric fryers? i have a gold metal corn dog fryer that just stopped working , i checked the power coming in and that is fine.this unit does not seem to want to power up, no red light no heating. any ideas?
What is happening when the fryer pilots lights great turns on great and as soon as it reaches a certain temperature it cuts off ?
Did you find a solution, mine is doing the same. Pilots fine, it reaches temp once then shuts off
ive worked on fryers for years and the last thing i would change is the gas valve.
How do you fix a no sound issue on one?
who can i call to have come look at our commercial deep fryer at work,to see what needs to be fixed?thank you for your time.
Thank you for your time.
What could be a reason the back side of deep fryer has laud poping sound. Jason
I have flames coming up and out of my flue, any answers?..I cleaned the tubes
Are pilot light stays on but our burners shut on and off and takes a while to heat what could be wrong or is this normal
Do you know what would cause fire to go higher than norm? Hard to explain; but when I open door to fryer; flame actually so high it fares out. Yikes
If the high limit is open (tripped) then the pilot should go out. Most electric fryers have a manual reset that must be pushed to close the switch, gas fryers will kill the pilot requiring the user to relight the pilot.
If the oil is overheating, there are two most common problems: the thermostat is stuck closed, or the gas valve is stuck open (on gas fryers) or a contactor(s) is stuck closed (on electric fryers). I can't imagine a high limit causing an overheating issue as it's simply a fail safe to keep oil from overheating. A tripped high limit can cause an non-heating issue, however you'd know it was the high limit by either a) having to reset the switch constantly, or b) relight the pilot. Also in most situations, the oil simply won't heat at all.
I'm not sure I'd recommend the end user to bypass the high limit, even as a test. Most people don't know what they are doing, and if you are facing a condition such as a runaway t-stat, coupled with a novice handman-cook jumping a high limit, and you could heat the oil to it's flash temperature which would cause big problems.
Vulcan fryer
gas fryer repairs/installation
What does it mean when a continuous beeping than open probe keeps flashing
On an electric fryer
bad thermocouple
hi, i can light the pilot , but once we turn up the temperature, the pilot went out. What is wrong with it?
Sounds like the thermopile is weak.
thermostat is verry important in a fryer. they work as safety device in the system to protect the unit itself as well as the operators. they can be by pass for temporary to keep our fryers working. but my sudgestion is to replace it by the time you found it un accurate.
how much of a difference should there be for the fryer to recycle? like say i set it 350, should it come back fireing again when it drops ot 330?
That depends on the thermostat controlling the unit. Ideally, we wouldn't like to see it get that low, but it's subject to whatever the engineers designed it with.
- Tundra Team
yea automatically! if not then have it replaced.
10-15 difference other wise calibration must be done
Thermopile
I love the concept for the video but honestly, you need to be more descriptive with your explanations. You talk about this wire and that wire and this and that setting but you don't explain how to adjust any of them
grate end user is going to fix his own fryer real smart have some who knows nothing about gas
hi idiot, do you thing everyone lives in the USA and in the little town where you are?
All you said was this and that maybe wrong with it
You basically didn't tell me how to test anything
😂😂😂😂😂
Thermopiler smh I see someone skipped English