Thank you so much Mike. Very clear and simple. When I went to the official service they didn't do it arguing that they didn't have the updated software on their computer... Incredible.
Mike, I just purchased a new Pan-America (2022 model) for a great price because it's an unsold 2022 model and love your channel because it teaches me allot about this bike! Thx Mike!
Just a note to thank you for your detailed video on this issue. Just bought my Pan America this past Friday and had navigation connectivity issues with the HD app. I was able to download the software update and upload it and now it's working fine.
Thanks Mike! Just asked my dealer to do the update while in for 5k service and of course they forgot. I said screw it and followed your guide! Only did it today but so far so good! thanks for the video.
Just now updated the software on my 22 PAS, based on your video. Thank you Mike for putting out informative technical and maintenance videos. I also completed my oil change yesterday, again, based on one of your videos. Continue your excellent content, and "Ride On" brother!
Thank you for another informative video! Finally got around to updating my Pan America ton tonight after a nice 45 mile ride on the last day of January in Minnesota!!!
You would 'likely' be ok just making sure your battery is fully charged before starting the update, but I don't take chances on it ever since I actually had the dealer brick my bike when they failed to have the bike on a power source during a BCM update, HD Tech Services had to walk them through how to restore it.
Thank you for creating this video. I followed the instructions, but it didn't find the pv2 file on the memory stick. I used a 64GB stick and the pv2 file was the only file on the stick. How do I make the bike look for the file?
Curious if there was a particular harness you used that came easy to wire to the battery. Also, can you “jump” start the bike through the harness hard wired? Thanks for the vids. People in some of the fbook groups need these vids to help them.
A battery tender will come wuth a plug that bolt to the battery terminal. I suppose you could custom make one with huge wire capable of supporting the amps needed during jump start.
It’s just a standard battery tender harness. Probably not quite enough to support a dead battery jump start. But I do use it to run a small tire inflator.
I've never had my bike go into limp mode, but it's usually because the bike is not getting the correct signals from something, a sensor, another module, etc.. Should have some codes that can give more insight as to why. If it's new, make the dealer look into it.
great vid , i tried to upload mine today . new usb uploaded the software on to this but bike says no update found am i the only one having this issue ? cheers
those codes are from the electrical diagnostics manual, which Harley does not make freely available. It requires either buying the paper manual or subscribing to their online service information portal. I pay $60 a year for that subscription.
@MikesMotorbikeChannel absolutely great my friend thanks for checking for me my pan america is still working also but a few people I know have had problems after it seems to me that someone didn't do something correctly or might have let the voltage drop or something 🤷🏻♂️ again thanks for your quick reply and your channel helping us along the journey my friend 😁
@MikesMotorbikeChannel just seems weird to me that before 1 out of 10 starts was a double push to get running and now 3or4 out of 10 trys I have to push button again, I'm guessing that there is a way to download previous flash and put it back in to confirm 🤷🏻♂️
Yea my friend I just seen recent (software updates) changes the actual software is current but now says (no adapters) on usb stick so I went to wally world and purchased a dual stick with both ends needed re-loaded software and put it in bike again and I can't be 100% but I think it is starting faster than ever with less hesitant starts , just wanted to bring it to your attention since you definitely are more computer savvy than me 🤷🏻♂️
HD says that’ll be a 30 min service fee charge of $50. Not kidding. They tried me with that, but the bike is still under warranty so I wasn’t having that.
@@mmair8222 my guess is that is going to vary dealer to dealer if they want to cover it out of "goodwill", but once out of warranty, they are not getting reimbursed from HD corporate for doing the work.
I have a month and a half left on the factory warranty, then the extended warranty kicks in. I got charged $60 .. they said for the diagnostic check. I have a case filed with corporate.. we'll see. Quick question, I have the model with Semi-active suspension (not Enhanced) hence, no ARH.. what is the purpose of the ARH icon doing on my display? With the latest software update, it does change color..Just curious. Thanks for your time!
Thank you! I appreciate how you went through each step of the process, showing what to expect along the way
Thank you so much Mike. Very clear and simple. When I went to the official service they didn't do it arguing that they didn't have the updated software on their computer... Incredible.
Mike, I just purchased a new Pan-America (2022 model) for a great price because it's an unsold 2022 model and love your channel because it teaches me allot about this bike! Thx Mike!
Just a note to thank you for your detailed video on this issue. Just bought my Pan America this past Friday and had navigation connectivity issues with the HD app. I was able to download the software update and upload it and now it's working fine.
Thanks Mike! Just asked my dealer to do the update while in for 5k service and of course they forgot. I said screw it and followed your guide! Only did it today but so far so good! thanks for the video.
Just now updated the software on my 22 PAS, based on your video. Thank you Mike for putting out informative technical and maintenance videos. I also completed my oil change yesterday, again, based on one of your videos. Continue your excellent content, and "Ride On" brother!
Thanks! I've watched several of your videos. Very informative.
Thank you for another informative video! Finally got around to updating my Pan America ton tonight after a nice 45 mile ride on the last day of January in Minnesota!!!
Great to you videoing again Mike
Worked like a champ. Thank you!
This is a must do for me. I hate seeing the heated grip symbol in middle of summer. I picked mike up in April and was apparently not updated
This update only came out a couple weeks ago.
Once they update the font size on all the numbers, it would be better.
Appreciate the content man!
Thanks Mike!! I have no extra battery tender connection, so I've asked the dealer to do the update.. ;-)
You would 'likely' be ok just making sure your battery is fully charged before starting the update, but I don't take chances on it ever since I actually had the dealer brick my bike when they failed to have the bike on a power source during a BCM update, HD Tech Services had to walk them through how to restore it.
Thank you for creating this video. I followed the instructions, but it didn't find the pv2 file on the memory stick. I used a 64GB stick and the pv2 file was the only file on the stick. How do I make the bike look for the file?
Make sure the usb is formatted as FAT32, I believe the maximum size of the drive is 32GB.
Had this same issue, also used a 64GB flash drive. I’ll try the different formatting
Curious if there was a particular harness you used that came easy to wire to the battery. Also, can you “jump” start the bike through the harness hard wired? Thanks for the vids. People in some of the fbook groups need these vids to help them.
A battery tender will come wuth a plug that bolt to the battery terminal. I suppose you could custom make one with huge wire capable of supporting the amps needed during jump start.
It’s just a standard battery tender harness. Probably not quite enough to support a dead battery jump start. But I do use it to run a small tire inflator.
It works great doing it yourself💪🏻
Apart from the cosmetic changes which are mentioned , any other fixes you noticed ? In the release notes it says various other fixes.
Nothing that I’ve noticed so far.
I'm experiencing "limp mode" quite a bit lately. Any insight into this? (brand new bike, no damage of course)
Have you tired the dealer? If it’s new it should under warranty.
I've never had my bike go into limp mode, but it's usually because the bike is not getting the correct signals from something, a sensor, another module, etc.. Should have some codes that can give more insight as to why. If it's new, make the dealer look into it.
@@MikesMotorbikeChannel Yeah, taking it in today. Thank you!
How do you clear the fault code
great vid , i tried to upload mine today . new usb uploaded the software on to this but bike says no update found am i the only one having this issue ? cheers
I read somewhere that you need the drive formatted as FAT32. Can you try that.
I had to drag and drop the file (not the folder) into my USB. I didn't format and it worked for me
@@12345....... It might already be a FAT32 formatted drive.
Hi, Mike will you post a link to the H-D website where there is a list of errors that you presented in the video?
those codes are from the electrical diagnostics manual, which Harley does not make freely available. It requires either buying the paper manual or subscribing to their online service information portal. I pay $60 a year for that subscription.
@@MikesMotorbikeChannel Good to know, thanks Mike for the quick answer 💪
Hey Mike have you noticed the usb-c not charging/working to charge phone or other devices since the update?
just doublechecked, and charging is still working fine for me.
@MikesMotorbikeChannel absolutely great my friend thanks for checking for me my pan america is still working also but a few people I know have had problems after it seems to me that someone didn't do something correctly or might have let the voltage drop or something 🤷🏻♂️ again thanks for your quick reply and your channel helping us along the journey my friend 😁
My update did die under the software update. The battery die. Now i cant do anything
.
Have you noticed anything since update? Mine seems like it does the starting fit every now and then and before that wasn't as much as now 🙃
Coincidentally, I’m having an occasion struggle to start, but I can’t see how a tft update would cause it. Haven’t ran down a root cause yet.
@MikesMotorbikeChannel just seems weird to me that before 1 out of 10 starts was a double push to get running and now 3or4 out of 10 trys I have to push button again, I'm guessing that there is a way to download previous flash and put it back in to confirm 🤷🏻♂️
@MikesMotorbikeChannel p.s. it's not throwing codes when it doesn't start right away either though, just thought I would mention that also .
Yea my friend I just seen recent (software updates) changes the actual software is current but now says (no adapters) on usb stick so I went to wally world and purchased a dual stick with both ends needed re-loaded software and put it in bike again and I can't be 100% but I think it is starting faster than ever with less hesitant starts , just wanted to bring it to your attention since you definitely are more computer savvy than me 🤷🏻♂️
HD says that’ll be a 30 min service fee charge of $50. Not kidding. They tried me with that, but the bike is still under warranty so I wasn’t having that.
wow, I was never charged for updates during my warranty period.
Does the dealership charge for the updates if your bike is no longer under warranty?
@@mmair8222 my guess is that is going to vary dealer to dealer if they want to cover it out of "goodwill", but once out of warranty, they are not getting reimbursed from HD corporate for doing the work.
I have a month and a half left on the factory warranty, then the extended warranty kicks in. I got charged $60 .. they said for the diagnostic check.
I have a case filed with corporate.. we'll see.
Quick question, I have the model with Semi-active suspension (not Enhanced) hence, no ARH.. what is the purpose of the ARH icon doing on my display? With the latest software update, it does change color..Just curious. Thanks for your time!
@@tomwidger219 that's interesting, not sure what the icon would mean for non-ARH models. When is the icon on? It flashes green?