How to repair Pioneer VSX-831 firmware upgrade 1-83 error no sound

Q3401 - W25Q64FV :
drive.google.com/file/d/1iUYA...
------------------------------
Vibe With Me by Joakim Karud / joakimkarud​
Music promoted by Audio Library • Vibe With Me - Joakim ... ​
------------------------------

[@benwit4722]

Thanks a lot for this informative Video. Unfortunately, I do not have the possibility to program the Chip. Would you offer any opportunety to sell a ready chip or do you know any shop that can potentionally do that? Any reply is highly appreciated. Ben

[@nateplotnikoff1197]

Hey I'm trying to solve problems with my vsx 1026, ue22 and ue33 where did you find the files for the new Chip?

[@pragmaticeffect1589]

Hello; Before doing this, didn't you try to do an update via USB and if it still doesn't work, do a Downgrade? (It worked for me with this last one and then I continued doing Upgrades without problems) Greetings! 😉

[@arielcelular2890]

hi, do you have the bin file of the pioneer receiver vsx-lx101?

[@GaragemDoChines]

Hello, this code works on any receiver pioneer that uses this Q3401? Because I have one receiver LX75 and I don't have any audio.
Can anyone help?
The service don't know anything about it, they only want to solve the problem replacing the full dsp board-

[@AdamG.BeeSeL]

Hi there. First sorry for my bad english ...
I have problem with my pioneer vsx 832 ... its firmware error I cant udpate device usb , net wi-fi cable dont work
have you some idea what / how reapir this device ...
or have you bit file to resolding bios chip w25q64fv ...

[@moni.gheorghe9999]

Hello. I have had a PIONEER VSX 527 K for about 10 years and it bothers me, meaning it no longer reads music from USB and, it doesn't connect to the net, I can't listen to radio on the net (as if it doesn't receive an IP address) , the net cable has been replaced but in vain, the same problem. If you can help me with any information, contact me. Thank you.

[@adsaudioenthusiastic8704]

My pioneer vsx930 gives video output but dont give any audio output. Pls suggest me how to repair it..?

[@davedeloera318]

Hi many thanks for this video, it gives me hope bring back my Onkyo RZ710, it has very alike problem like your Pioneer, also Update in 9% failure and 1-84 error code, have tried use lower version of firmware and also enter service mode to update with no luck, in service mode DSP Write failed at 98%, and firmware version shows very random code while others in 1.0x.
Looks like the only solution is the program the Q3401 chip, I have W25Q32BV chip and CH341a programmer, it should be compatible with W25Q32FV, the only problem is how to get the firmware bin only for Q3401 like yours in the video, the only files can find so far are encrpted in of0 of1 of2 format, some are decryped but not sure which one is correct, is there anyway to indentify, or how did you managed to find the file, thanks a lot.

[@DrAVRECEIVER]

Helo sir in what conditions it ask for firmware updates....

[@antonyprasath]

Bro I want vsx 1131 programmer file plz

[@pokrimadhu]

Hi I have vsx831 it works fine but no vfd display😭 I have to contact hdmi to view(checked voltage , clk, data,reset to vfd) please help me

[@ralphvergara1224]

Hello, I would like to ask you a question, where can I get the firmware from? from both Onkyo and Pioneer. Thanks for answering

[@audiosmart1342]

Hello, Onkyo firmware: www.intl.onkyo.com/support/firmware/index.html

[@audiosmart1342]

Pioneer firmware: pioneer-audiovisual.com/support/

[@ralphvergara1224]

Hello, thanks for answering, but onkyo website the files have another extension, they are not .bin, could you tell me how to go to .bin? . Thanks

[@microled9930]

Hi..how can i get poineer vsx319vk firmware.

[@user-qt7mf6vw8e]

Hi, please I need firmware for Pioneer SC-1222/SC-61/SC-63/SC-1227, Ithink it's the same for all this model but my it's the 1222

[@pakonergp1330]

Hello; same problem on lx501; do you know where I can recover the right file? or if you have way to share it. Thank you

[@petrumerticaru8053]

Hello
I also have a pioneer vsx 921k amplifier
it is no longer heard in the speakers, because a software update failed, the old software did not work and the new one did not install
UE33 error occurs
the original remote control doesn't work anymore and I can't reach the settings
No settings can be made with the universal remote control
what can be done ?

[@pathfindero2072]

Salut, am si eu unul cu acelasi simptom.Ai reusit ceva cu al tau?