@@Powerbrickperformance Ya, i'm rebuilding a R1100RS with much of the parts of a R1150RS (gearbox, swing arm, wheels, brakes, front fork) and a telelever "wishbone" of R1150 rockster, a final drive of a R1150GS. to have more acceleration.
Yes we cure the paint using heat prior to assembling the engine. This only applies to the cylinders and engine head. the rest is powder coated and does not require curing.
Before we start the painting process, our engines are overhauled professionally to restore cylinder walls, replace piston rings and bearings, surface the head and restore valve seals. This is outsourced and once the engine comes back, we install cams, timing chain and followers. I am planning to do a video on this later!
Looking forward for the build
you will not be disappointed!
Cool, that the ECU still works on these "old" bikes.
It's still a BMW!
@@Powerbrickperformance Ya, i'm rebuilding a R1100RS with much of the parts of a R1150RS (gearbox, swing arm, wheels, brakes, front fork) and a telelever "wishbone" of R1150 rockster, a final drive of a R1150GS. to have more acceleration.
don't you have to cure the paint by heating the surface after painting? or was this not an issue with your paint choice. Great video by the way!
Yes we cure the paint using heat prior to assembling the engine. This only applies to the cylinders and engine head. the rest is powder coated and does not require curing.
i love your work !! very nice
Thank you!
Did you rebuild the rotating assembly?
Before we start the painting process, our engines are overhauled professionally to restore cylinder walls, replace piston rings and bearings, surface the head and restore valve seals.
This is outsourced and once the engine comes back, we install cams, timing chain and followers. I am planning to do a video on this later!
Can I change the front crankshaft seal through the ignition Timing plate?
What silicone are you using as sealant?
We use Loctite 510 flange sealer!
Hey, Mister, do you need a quick shift sensor?
erg mooi gedaan!
🙏🙏
pregunta...por qué no puso empaque......y uso silicona ...la cual tapa conductos y adiós motor???
I can't wait for the next episodes. When's the next one?😊
We will try and do a new episode every two weeks!
Oh brother... Tell me you didn't tighten those screws in the order you showed.
4:98
Can’t stand the music. Repetitive aggressive sounds. To loud too
Thanks for the feedback! we're still figuring out how to best setup these videos so they are both informative and pleasant to watch.