G'day and greetings from Tasmania Australia 🇦🇺 I have two eccentrics to machine for a large mill engine you have really helped me in the setting up and showing how to machine this part . Thank you it's made me more confident in giving it a go. Thank you John
You know you can do that with a four-jaw chuck and a hell of a lot less work than you're doing marking things. You just have to be real good at using an indicator and then you don't have to do so much scribing.
Blueprint called for eccentric to be 14mm diameter, at the end he had a 15 mm diameter. Nothing was to any dimensions as called out in the blueprint... FAIL...
G'day and greetings from Tasmania Australia 🇦🇺 I have two eccentrics to machine for a large mill engine you have really helped me in the setting up and showing how to machine this part . Thank you it's made me more confident in giving it a go. Thank you John
Very help full Thank you sir
First of all a honest video!
Use the 3 jaw chuck with a shim in one jaw as thick as the eccentricity
Skip to 14:44 for teacher crashes toolpost into the chuck. I'm familiar with that sound having done this myself. ;)
Hahahahahahaha
Cool video, very helpful for my project!!
Nice sir I liked
Hanzhen harmonic gear , strain wave reducer, robot arm gear , over 30 years experience
ऐसी ही जॉब क डबल सेंटर दोनों ही दिखना चाहिए ,,,बताए sir जी,,,थैंक्यू sir
👍👍👍
Thank you sir.
You know you can do that with a four-jaw chuck and a hell of a lot less work than you're doing marking things. You just have to be real good at using an indicator and then you don't have to do so much scribing.
This is practical lecture in the college
Yes but that would be _cheating!1_
Por razones de seguridad NUNCA operaría esa máquina con reloj ni con pulsera.
Blueprint called for eccentric to be 14mm diameter, at the end he had a 15 mm diameter.
Nothing was to any dimensions as called out in the blueprint... FAIL...
now I make roll sizer die.