This with a Cmmg Mk47 or PSA KS47 pistol in 7.62x39r and an 8 to 10 inch barrel. Because short .308 is pointless, but this suppressor needs a short package in .30 caliber. Or maybe a Desert Tech MDR.
It would be nice to see a comparison of the best suppressors for AK and AR variants, 7,62 and 5.56, and for the new military calibars that are being introduced 6.5 and 6.8.
@@chltmdwp Yes, yes it will and it does, plenty of accounts, some even in the FN forum. Also, worth mentioning, here is the disclaimer straight from FN's website: "IMPORTANT: Any addition to your FN firearm of aftermarket accessories (*such as suppressors*, triggers, muzzle devices, stocks, etc.) is considered a modification of your firearm from its original configuration, which may void your warranty." If you need to ask anything to FN's warranty and they find out your gun had a suppressor, the warranty is voided. If they don't find out, you might get away with it.
@classicfirearms975 I know, dumb question; it's just that with no internal baffles and no back pressure, it sounds like a (very sophisticated and effective) linear comp, and if so, would it still be an NFA item? I've probably misunderstood the description somewhere along the way.
Would this technically work on the S&W M&P 5.7. Forgetting efficiency, could you buy a 1/2 by 28 direct thread mount and be able to shoot a few rounds through? And would the increased diameter, even with a dot, interrupt aiming?
Running an actually useful comparison between suppressors is a colossal task, this channel does not have the means nor the expertise to do such a thing.
@@davelpz3340 also all titanium has a slightly shorter life round count. That’s why some have steel core in the center to extend the life, like the HX-QD 762 Ti I believe.
now with people using taller optic mounts it would be nice for companies to start making shorter and fatter cans. The real question is. How much performance you can gain from increasing the diameter???
@@CrazyLegz72 i mean like 2.5 to 3 inch wide cans and 4.5 inches in length so you would be adding less than 4 inches to the muzzle in DT configurations. Delta p had a 3.5 inch long can that seemed to work well. Yhm is coming out with a 4.5 inch long can called the “fat cat”.
I like the new "intro" segment you have for your videos, but in the segment where Matt, Clint and Kaya are all standing together (Clint in the middle), why does Clint look like he's stoned out of his gourd? 😁😁😁
At least all the poors crying about the SCAR warranty have moved on from crying about the reciprocating charging handle. It is almost time for some new material though.🙄
Knew this was happening when all their 7.62 cans started becoming "no longer available". Looking forward to it!
The warranty on that SCAR is void 😂
Ur mom
Not buying an FN product then
lol! RIP.
Fun fact: Hi-point designed the scar and sold it to fn.
That Is factually incorrect. It's a "low backpressure" can which dies not void the warranty. Besides warranties are for poors.
This with a Cmmg Mk47 or PSA KS47 pistol in 7.62x39r and an 8 to 10 inch barrel. Because short .308 is pointless, but this suppressor needs a short package in .30 caliber. Or maybe a Desert Tech MDR.
I bought my 7.62-QD over a year ago.. still waiting to actually get my hands on it. Can't wait.
Dam I miss Kaydi! She was so helpful, energetic and enthusiastic. Hopefully you guys can find another charismatic personality!
It would be nice to see a comparison of the best suppressors for AK and AR variants, 7,62 and 5.56, and for the new military calibars that are being introduced 6.5 and 6.8.
Was just looking at the flow 556 at the local store last week.
Any concerns about it being a "consumable" and their customer service?
@@Gnolomweb none that I saw.
Paired with SCAR it's absolutely beautiful
With a void warranty as well
@@BasementOps no it won't
@@chltmdwp Yes, yes it will and it does, plenty of accounts, some even in the FN forum. Also, worth mentioning, here is the disclaimer straight from FN's website:
"IMPORTANT: Any addition to your FN firearm of aftermarket accessories (*such as suppressors*, triggers, muzzle devices, stocks, etc.) is considered a modification of your firearm from its original configuration, which may void your warranty."
If you need to ask anything to FN's warranty and they find out your gun had a suppressor, the warranty is voided. If they don't find out, you might get away with it.
If the 762 suppressor can take 556, does it make the 556 cans pointless to have? Or do chamber specific cans have a benefit?
Huxwrx made amazing suppressor! Oh, i love the new intro, good job guys!🤩
The hxw and scar 17-20& 16 really work well together
So how would one attach this to the LH 14x1 ak platform?
Hux makes a muzzle device in M14x1 LH. Just swap it out with your current AK muzzle device and Rockset it on .
@@Dwmlsu44 thank you 👍!
How will it do with SBR 308? 12.5- 14.5 inch
Its Here! 🎉❤
Welp that SCAR’s warranty is done, thanks Huxwrx.
huxwrx also doesn't have the best warranty
@@Gnolomweb interesting 🤔
@@Gnolomweb how so? I ordered one. Curious 🧐
@@romeofoxtrot363 read it. Basically, if it's any of your fault. YOU pay. RC2 is no questions asked--pretty much
@@Gnolomweb great point
I like this one. Thanks for showing me, Clint Morgan.
Are these magpul explorer xl’s blue mirror tinted or gold?!? I can’t tell… 🤔
What's the difference with a linear compensator?
@classicfirearms975 I know, dumb question; it's just that with no internal baffles and no back pressure, it sounds like a (very sophisticated and effective) linear comp, and if so, would it still be an NFA item? I've probably misunderstood the description somewhere along the way.
is there a way to use a cherry bomb with the flow? I really dont want to jhave to spend another $500 on mounts
How about I just drill small holes around the big hole of my oil filter? 😂
Yes
would this finally work with the sig rattler or no like its previous version
Ayo first, been waiting for this 3d printed 30 cal
Hmmm, wonder how good this will look on my PTR
Would this technically work on the S&W M&P 5.7. Forgetting efficiency, could you buy a 1/2 by 28 direct thread mount and be able to shoot a few rounds through? And would the increased diameter, even with a dot, interrupt aiming?
There is no reason it shouldn’t work
Omg thank you for changing that obnoxiously loud intro
At @13:32 when he's tightening the can on without getting youtube'd :O
They really need better muzzle devices before I’ll consider them. Or offer a Keymo version of their cans so I can get better muzzle devices.
All cans should just be direct thread anyeay
Anything but direct thread is kind of g4y.
Should do it on a ptr-32 kfr
Could you do a comparison between this suppressor and the Surefire Socom 300 SPS
No
Not even worth comparing those two. Apples and oranges
Running an actually useful comparison between suppressors is a colossal task, this channel does not have the means nor the expertise to do such a thing.
Of course this comes out 3 months after I buy an HXQD 7.62...
Still waiting to see the huxwrx flow 556k on the mk18.
Can this be used on 5.56 also?
Yes no problem on 556
Anything below 308 works. Not top efficiency, but it works.
Anyone know which suppressor would be best for the 5.45 cartridge ?
I use this for my 545. Works pretty good.
I'm lefty. It is 💯 % true( about theAk). I've always said that as well.
Definitely curious about 300 blk subsonic performance
Not as good at handling subsonics from what I’ve heard
literally bought a 762 can like a month ago... thanks huxwrx
Titanium heats up faster then the other metals…but it’s lighter. I don’t know that they are as durable either.
@@davelpz3340 titaniums are also said to have a first round spark. ...not wanted for 30cal snipers.
Who asked you
Bought my HX-QD 762 Ti, two weeks ago…. 🫤
@@davelpz3340 also all titanium has a slightly shorter life round count. That’s why some have steel core in the center to extend the life, like the HX-QD 762 Ti I believe.
at 1682 price tag im going to have to pass.
That is a HARD PASS 😑
Gunna buy 10 hi points instead and stuff them in random places like a squirrel
That's msrp it'll be closer to $ 1,100-$1,200 street price
@@yourdad4627 about 5-800 dollars more than it should be for them to still make a reasonable profit.
I have seen solvent traps made with titanium be under 200$. Just saying. If the tax stamped ever go away they could be mass produced just as cheap
It’s always about girth
now with people using taller optic mounts it would be nice for companies to start making shorter and fatter cans. The real question is. How much performance you can gain from increasing the diameter???
A chode suppressor😂
That's what they just did.
@@CrazyLegz72 i mean like 2.5 to 3 inch wide cans and 4.5 inches in length so you would be adding less than 4 inches to the muzzle in DT configurations. Delta p had a 3.5 inch long can that seemed to work well. Yhm is coming out with a 4.5 inch long can called the “fat cat”.
cool, but don't expect any help if you get any strikes with this can
Lol
Dig the new intro. Nice!
I'd like to have one, but about half of my guns are pinned & welded to keymo brakes...
Needed a new intro but not really feeling this one though
Love the intro
Cool can, man!
It's Cost ?🤷
Dont forget the $200 proprietary muzzle devices
My flow 556k came with the muzzle device.
@@rico989 thanks one rifle johnny
$200 is only slightly more than surefire's $170. Are you one of the poors
Theyre not for everybody, like most things in life you gotta pay to play.
I don't have any yet.
Flow lets go!
everyone says it's a "consumable" . Any concerns bout the round count? I'd spend 50k rounds in training in 3 years.
@@Gnolomweb Watch the video. They literally go into repairability.
OSS suppressor vibes ✅
They're the same company
Looks just like the MK47 from the giveaway.
Waiting on that multi caliber 🔥
Ur mom
So this has more girth and less length. Check
I like the new "intro" segment you have for your videos, but in the segment where Matt, Clint and Kaya are all standing together (Clint in the middle), why does Clint look like he's stoned out of his gourd? 😁😁😁
Dude the internals on that scar17 are going to be dust in 10k rounds guaranteed
Huxwrx vs Silent Steel suppressors
Can you Keymo this can?
Why would you want to do that? This QD system is superior to KeyMo
@67_PowerStroke alot of people have invested in Keymod muzzle devices
want one
why as opposed to a SPS300 or a Deadair?
I want it because I want it.
Id love to have one but i can't justify the bribe money to the gubment to exercise a right, id be happy to purchase one by other means...
Ok it's official I want a flow.
Ca hates hearing protection.
At least all the poors crying about the SCAR warranty have moved on from crying about the reciprocating charging handle. It is almost time for some new material though.🙄
I want to see ar15 in 5.45mm mutant supressed
Neatoooooiiiiiiii🤪
Just call it the flowrx.
Aren't you the guy who keeps saying "Clips"?? THEY ARE SUPPRESSORS!
Check out the patent - Hiram Maxim called it a silencer.
Walker Betty Walker Matthew Lee Barbara
Flow through technology doesn’t look all that great, still looks to be pretty gassy 🤔
I own exactly 0 NFA items
I own ur mom
sorry if that is how any of yall identity but please get a real female host back
Ur mom
Go apply for the position.
MADE IN CHINA
😢
Lol what?
Yo Mama is Made in China
They are made in Utah
So is your mom
It’s going on my GAP36SB
Dang and I just bought the older HX-QD 762 Ti 🫤
Wrong
@@DinoNucci wrong what?
@@slb_clip you r wrong
@@DinoNucci wrong about what?
@@slb_clip yup