Why are there no wide shots of you using the device? It's only ever partly on screen. The last shot with knife blade and piece of wood was far more energy than those capacitors could provide, and for far too long. Those caps would drain almost instantly with how little resistance is in the design.
I like it. I think I'll copy your design. I would add a momentary switch on the positive rod and include a high wattage resistor to discharge the device for storage. Thanks for posting!
Capacitors like that aren't designed to be shorted out and are likely to be damaged by being used in that way. You'd be better off using capacitors designed for camera flash units as they are designed for near instant discharge.
@@plutonianfairythey are just normal 50v polarized capacitors and don't sweat discharging these this way. He's thinking of tantalum capacitors not regular aluminum film electrolyte caps like these. All the stores energy is going into the arc and work. Your only real worry is over voltage and go watch an electroboom video to see what happens.
Good video, a curious data: those are not Super Capacitors (which are rated in Farads not microFarads) the ones you're using are normal electrolitic capacitors, your setup has only 37,600 microFarads which equals 0.037F, hardly a super capacitor
@@skillmake مگه من گفتم کار نمیکنه؟!این خازنا برای اینکار نیستند بعد از یه مدت کوتاه ظرفیتشون به شدت افت میکنه ...برای اینکار باید از خازنهای فوتوفلش استفاده کنی که صرفه ی اقتصادی نداره...ولی اگر به عنوان کاردستی برای مدرسه درست کردی خوبه
It's always brown hands in these sketchy videos.... I'm assuming that these are the same people who work in 7-11's *cough* Apu *cough* cherry squishy anyone?
All fun and good tell the capacitors do the capacitor things
Well. It could happen
Wish, I had seen this any earlier…
👍👍👍
Why are there no wide shots of you using the device? It's only ever partly on screen. The last shot with knife blade and piece of wood was far more energy than those capacitors could provide, and for far too long. Those caps would drain almost instantly with how little resistance is in the design.
Agreed.
He is probably using >60 Ah 12v car battery and those capacitors are only for show off.
I like it. I think I'll copy your design.
I would add a momentary switch on the positive rod and include a high wattage resistor to discharge the device for storage. Thanks for posting!
how eould you do it with the wattage resistor?
@@VitMcG I'd short the terminals.
It's not wattage. It's called POWER.
Well done 🎉
Capacitors like that aren't designed to be shorted out and are likely to be damaged by being used in that way. You'd be better off using capacitors designed for camera flash units as they are designed for near instant discharge.
Thank you for the information you shared, I will definitely correct it in future videos
What are those caps called?
@@plutonianfairyare you serious 😂
@@davey2k12handy caps 😅
@@plutonianfairythey are just normal 50v polarized capacitors and don't sweat discharging these this way. He's thinking of tantalum capacitors not regular aluminum film electrolyte caps like these. All the stores energy is going into the arc and work. Your only real worry is over voltage and go watch an electroboom video to see what happens.
Thanks for watching.❤️🙏
Thank you . Nice video. Keep going !
Do you know in 4:44 you connected the charger in reverse polarity?
One of the simplest
Super video ever...♥️👍
Thanks 🤗
Thank
salam dari Subang Aceng Nok Geboy selamat selamat selamat
6:18，The tin on capacitor poles melted.
Behind the scene lol
Wow great ....noticed 😂
Very cool
Excellent..
Thank you💗.
Good video, a curious data: those are not Super Capacitors (which are rated in Farads not microFarads) the ones you're using are normal electrolitic capacitors, your setup has only 37,600 microFarads which equals 0.037F, hardly a super capacitor
Very impressive!
Thank you! Cheers!
@@skillmake aa1¹11q1eQ11
So much power hehe
Can you make a DIY video on how to make a mini radio from discarded electronic components?
Just throw em in the trash. When youre ready, just start building.
Perfect
thanks for watching
Good 👍
Bau omaiget 😃☺
You should zoom out your video to include your battery set up in your diy.
you just need to read the description for more information. There is no battery in this setup: "And I charge them with a 12-24 volt power supply."
@@florianj6490 24V/50A power supply ))))
Y lo mejor que no necesita energia 😂😂😂😂😂
You could buy a very good battery with the money you spent on capacitors, you wouldn't have to deal with it that much.
Nice vid, i wanna make an induction melting machine
You can get a cool breakout board for only 20 dollars which is 120w
you are a genius , you are very good , the welder is good and cheap
i try this circuit with the same value but i don't get the same result, what kind of transformer you are using?
Probably a microwave transformer with the secondary drilled out and replaced with about one turn of ultra thick wire.
So capacitors are just bullshit. A transformer of 150 amperes is enough to do the trick.
No current limiter ??
Why i'm subscribe you youtube?
you are making perfect power full idea
Super ❤❤❤
😊
Very Nice... Excellent Actually...
🌲💖👃💖🌲
Thank you so much 😊
В конце кандеры отпаялись
Только половина дела. Нужно между конденсаторами в цепь “+“ устанавливать катушки индуктивности! И подключить к AGM аккумулятору.
Can i use 33.3amp SMPS?
الشاحن الموجب علي المكثف الموجب صح
merhabalar benim anlaadim 220 sureklimi akimi veriyor yoksa 220 yi kapatip sonra mi puntaliyo bilgilendirirseniz sevinirim tesekkurler
How much time charging for capacitor.
Nice to
Dòng sả của tụ rất lới khi ghép song song các tụ lại với nhau như này ok
Pak,itu arusnya pakai arus AC apa DC ya
itu pakai arus DC 12 atau 24 volt
How do we remove carbon from beer?
did i see corect he conected the 12 positive to the cap negative surely thats incorrect
J,aime
Why there's no description,how am i gonna know what he use
The danger is that if it is parallel, it will short circuit
چارج کتنی دیر کرنا ھے اور کتنا وقت چلے گا
La soldadura se ve de mala calidad se ve que se quema mucho
my question is will this ever explode out of a sudden?
Hello there im you 9months ahead but still havent got the answer.
How to desoldering all legs within 1 second😂
Qual voltage de alimentação, ac ou dc
DC
😍😍💪🏻💪🏻💪🏻
ok
и что, реально рабочая приблуда?
На колко волта езахранването на тази схема защото нищо неказвате потози въпрос.
12v24v
Dude this is complete crap. take capacitors 350 V 800,000 uF then in 1 touch you will weld everything
Instead Of A Battery
You Can Put A Dell Ac Adapter
From Laptop.
Amén.
Falso esta usando una batería de carro
عالی بود
امتحان نکنی چرت و پرته...خازن دونه ای خدا تومنو 4 بار اینکارو بکنی باد میکنه میترکه...این هندیا اکثر فیلماشون فیکه
@@JH-sb1yd این داشمون ایرانیه هندی نیس ک
@@hasantey عبدلله عبدلاس...تو هر ملیتی
میخوای برات پست کنم زحمتشو نکشی که درست کنی و تست کنی ببینی فیکه یا نع؟
@@skillmake مگه من گفتم کار نمیکنه؟!این خازنا برای اینکار نیستند بعد از یه مدت کوتاه ظرفیتشون به شدت افت میکنه ...برای اینکار باید از خازنهای فوتوفلش استفاده کنی که صرفه ی اقتصادی نداره...ولی اگر به عنوان کاردستی برای مدرسه درست کردی خوبه
barath pay speaker into blooth speaker or anything usefull
The video is fake, I use 10 X 10000uf and it did not work
Thanks ❤❤❤❤❤❤❤❤
Project file
fake like the most videos...
No power supply, and current flow ~3sek only from electrolyt capacitors? Sure...😂
Music band karke capacitor ka value batao
Цена кандьоров какая?)
1,8 бакса
@@astro13-q8y и года не прошло
please help turkey
My brother's mother tongue is Turkish and I will do whatever I can to help.
Greetings, the + and - of the battery are connected to the opposite reverse or does it matter?
Мда))
kok iso yo
It's always brown hands in these sketchy videos.... I'm assuming that these are the same people who work in 7-11's *cough* Apu *cough* cherry squishy anyone?
As fake as possible.
If this person lied more it would become a politician.
clickbait con
Халтура какая-то.
FAKE TITLE FAKE INFO
Fake👎👎👎👎👎👎
Undoubtedly fake!! Shame on you
How is it fake ? Its the same as just using a car battery's terminals 😂
Faek Faek😂😂😂😂😂
No thanks
Do you know in 4:44 you connected the charger in reverse polarity?