2016-2019 Toyota Tacoma TRD Fender Flare Replacement (Remove and Install)
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- I walk through the steps to replacing a factory front fender flare on a 2018 Toyota Tacoma TRD Pro. This video applies to 2016-2019 Tacoma TRD Sport, TRD Off-Road and TRD Pro.
Toyota Factory Part Numbers:
75871-04060: Right Front Fender Flare
75872-04060: Left Front Fender Flare
75873-04090: Right Rear Fender Flare
75874-04090: Left Rear Fender Flare
75395-35070: Orange Fender Flare Clips
75396-35020: Blue Fender Flare Clips
Amazon Orange and Blue Flare Clips: tinyurl.com/fl...
Amazon 3M Foam Attachment Tape: tinyurl.com/3M...
Best fender flare video on YT thanks for the details
You have the most comprehensive fender flare video in my opinion. Nice work my friend.
EXCELLENT video!! I recently had a body shop screw up a simple 3rd Gen Tacoma fender flare replacement 3 times due to poor quality work. 4th time I will do it myself after watching your video so thanks for that!!!
Those coloured pins go into the flare and then push onto the fender.
Thank you
Easiest way to get that 3M tape off, eraser wheel. I’ll be taking mine off, sanding them down smooth, then spraying them with bed liner and reusing them. More durable and a nice pop to the vehicle as well.
Excellent video! Thank you also for the links to the cips and flaretape.
If you live in the rust belt you should spray fluid film in the holes 🕳️ of the fender while you have the flair off. Or something similar like wd40 for a water displacement. Give it plenty it won’t hurt a thing.
I was thinking about putting the orange & blue clips on the flare first and pushing the whole thing on
Hi Gregory, some of the clips require a twisting motion to be installed on the fender, and they require more force to be inserted into the fender than to be clipped into the flare. I would insert them in the fender first, but I think you have a good experiment to try; it might work just fine. Post your results, please!
Awesome video 👍🏼
Next time.take off the wheel liner, and you will have no broken clips or broken pieces on the fender flare
On the one flare you removed in the video, one of the tabs on the front of the flare broke off. Were you able to remove the other 3 flares without breaking a tab? I’m gonna remove and reinstall the oem flares
You just need to be careful to not break that tab when removing it. You might want to try to put that flare tab out of the fender hole rather than pulling on the flare at that point. It's pretty fragile actually. I wasn't being careful to preserve the flare since I was replacing it.
Where did you bought your fenders flare? share the link please nice video
I bought the new flares from my local Toyota dealer.
Great video! Where did you purchase the trd fender flare?
I bought the new flare from the Toyota dealership here in Honolulu. You can find them used on Ebay though.
Is replacing the clips necessary if none of the old ones are broken?
If the clips are in good condition then they can be definitely be reused.
How many rolls of 3M double tape is needed for the entire 4 fender flares
I think one roll should do it
Does this work for any 3rd gen or does it stop at 2019
🤡
Great video, Jesse. What is the name of the tape and what are the clips called, please.
Hi Michael, links to both are in the description.
how did you order the flares from the dealership ?? i’ve asked my local dealership twice and they told me they can’t order fender flares
The laziness and bad customer service of some Toyota dealerships is amazing sometimes. You can order them online from plenty of dealerships if your local dealer sucks. SparksParts has been a good source in my experience: www.sparksparts.com/oem-parts/toyota-fender-flare-right-front-7587104060
Are the factory flare consider smooth or textured ?
Got to do this on 21 trd pro. Some jerk hit me. 😞 how much was the oem flare?
I paid about $220 for it from the dealer here in Hawaii. You can get them for around $160 from some mainland online dealers like Sparks Parts, but the shipping to Hawaii was going to make the cost the same as buying it here. Also, check Ebay for good used one.
@@whatwouldjessedo do they offer the flares painted to match the body?
@@rossdegreve5527 No, Toyota doesn’t offer them painted, but you can find used painted ones on Ebay.
Can you put 2005 clips on a 2019 tacoma ??
The clips I used are listed as being replacements for 2005+ Tacomas, so I would assume that you can.
Do a black line of silicon and the tape won't make u mad anymore
👍
Rub it out with some lime or wd40😎
So your saying , there is no way to remove the flair without all new fasteners
No, I don’t think I ever said that. If your fasteners are in good shape, you can reuse them.