Don't manually roll up the window, you risk backing out the twist lock of the cable spool housing from the door panel and unspooling the cable spool which is practically impossible to reassemble.
Couldn't get the motor apart. Created an air gap and ended up breaking the tabs in step 2 which theoretically should still release it but the motor is basically glued together...
The one with the door grab? You need to undo it. You wont be able to manually raise the glass or motor. It is held by another mechanism. Its the white thing with teeth that you could turn manually while waiting for the replacement unit..
@@some3ody but with the 3 motor screws put in place, otherwise there is the risk of unclipping the black case that keeps the white thing which pulls the metal cables :) if it unclips from the 3 tabs you can remove the speaker to gain access to the back and rotate/clip it in place.
So as long as you remove the door panel with the handle, all you need to do is Unplug motor, unscrew and replace with new motor Plug new motor in And then you're good? Seems super easy but not sure if there's anything to worry about on the glass side
![[LIVE] : ONE ลุมพินี 84 วันนี้!! คู่เอก "ก้องศึก vs เมืองไทย"](http://i.ytimg.com/vi/3kuzsAIDf1c/mqdefault.jpg)
I've been trying to crack the same motor for days. Mazda made sure that buyers won't be able to open and repair it. Thanks for sharing.
Quite possibly the greatest repair video I’ve ever seen! Thank you so much
Thank you verry much for sharing, this is exactly the problem of my mazda car.
Same problem so helpfull right?
Great video! Thank you!
That little excitement they got when they tested the window 😂😂 I felt that, 😅
Ya, DIY either goes bad or worse 😂
Don't manually roll up the window, you risk backing out the twist lock of the cable spool housing from the door panel and unspooling the cable spool which is practically impossible to reassemble.
Precisely what happen to me
Thanks bro!
Great video thank you so much.
Awesome...thanks a bunch
Ang galing nmn👏👏👏
Couldn't get the motor apart. Created an air gap and ended up breaking the tabs in step 2 which theoretically should still release it but the motor is basically glued together...
Hmmm. I should come off easily.. Wd80? The shell can be super glued together..
Hello po, different po ba ang motor kapag sa rear left passenger side or parehas lang sa driver side? Thanks po
AFAIK, same
Have the same problem sa Mazda 3 namin. Do you do repairs?
I don't Po. Pero can you diy?
Wow! Galing sana all marunong niyan.oi! Binate kita.sna ikw din.
Great video. So, that whole black panel doesn’t need to be removed to get the glass? Can just replace the motor?
The one with the door grab? You need to undo it. You wont be able to manually raise the glass or motor. It is held by another mechanism. Its the white thing with teeth that you could turn manually while waiting for the replacement unit..
@@some3ody but with the 3 motor screws put in place, otherwise there is the risk of unclipping the black case that keeps the white thing which pulls the metal cables :) if it unclips from the 3 tabs you can remove the speaker to gain access to the back and rotate/clip it in place.
@@whatsinsideinfo hmmm. Maybe.. :)
@@whatsinsideinfo Thanks for the warning, doing this whole process right now.
So as long as you remove the door panel with the handle, all you need to do is Unplug motor,
unscrew and replace with new motor
Plug new motor in
And then you're good?
Seems super easy but not sure if there's anything to worry about on the glass side