ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก

6010 welding rods good or bad

แชร์
ฝัง
  • เผยแพร่เมื่อ 16 ส.ค. 2024
  • Hey guys here's the link to my financial fitness channel= / financialfitness
    How to know if your welding rods are good or bad period what to do if they don't perform the way you want them to. How to manipulate the puddle and make money welding with chris.
    Taylorwelding
    6010
    pipewelding
    7018welding
    #pipeline
    Disclaimer: I am not a welding instructor, personal trainer, nutritionist or financial advisor. I’m a welder with life experience that aims to bring value to your life!

ความคิดเห็น • 99

  • @TaylorWelding
    @TaylorWelding  2 ปีที่แล้ว +4

    Hey guys here’s the link to my Finacial Fitness channelth-cam.com/users/FinancialFitness

  • @PatriotWeldFab
    @PatriotWeldFab 2 ปีที่แล้ว +5

    This dude is a drop-dead doppelganger for Billy Bob Thornton! Looks and sounds just like him. If all you did was listen to the audio you'd swear it was BBT! Great content! Give us more!

    • @TaylorWelding
      @TaylorWelding  2 ปีที่แล้ว +2

      I can do a great
      Sling blade impersonation

  • @mikecrice3646
    @mikecrice3646 หลายเดือนก่อน

    You're right! Stepping and stacking is simple, "if" you are able to maintain rod control.

  • @Demonlord468
    @Demonlord468 2 ปีที่แล้ว +5

    If you have a bunch of crap rods or good rods (Especially expensive ones) but, they have had some moisture get to them one thing you can do to attempt to save them is take take a small toaster oven out of the kitchen and toss the rods in there for about an hour at 250-300. Or if your at home toss them in the oven at the house. (While the ol lady isn't home preferably)
    I've brought many an old tired rod back to life doing that. I keep one of those small toaster ovens on my service truck just for that and not only because it works as a cheap hot box on a really cold day you can warm your lunch up as well.

  • @FarmBossSaws
    @FarmBossSaws 2 ปีที่แล้ว +6

    Thanks Taylor Welding, this helps me sort through the piles and piles of welding rods I got with my property.

    • @TaylorWelding
      @TaylorWelding  2 ปีที่แล้ว

      No problem Justin. That’s a little trick that will save you some time and frustration. Thanks for the comment

  • @stevewarner8880
    @stevewarner8880 ปีที่แล้ว +1

    I had a little job to do on my trailer the other day. Used my trusty old 1966 SA200 Redface and some 6010 5P+. Love those rods and listening to the old flat head with the straight pipe.

  • @joeolejar
    @joeolejar 8 หลายเดือนก่อน

    I keep coming back to videos like this to refresh my skills.

  • @Nuf_Nivah
    @Nuf_Nivah 2 หลายเดือนก่อน

    I’m using a Hobart champion 8500 and 6010 is sticking and skipping. I never had any issues with welding before my stroke and I used to have welds that you could not tell there was a weld. I learned on 6010

  • @davehawk305
    @davehawk305 6 หลายเดือนก่อน

    I am nothing more than a do everything myself because I want it right guy. I love to weld but only do it when I need or have to. I was so glad when you said "don't whip it" because when I heard that term it made head hurt. The way you explained it was perfect. Thanks and I look forward to learning more.... Hawk

  • @stevieb9104
    @stevieb9104 ปีที่แล้ว +1

    A good, experienced field welder can make anything work. Any rod, any machine.

  • @user-vf4vw8ry3p
    @user-vf4vw8ry3p 9 หลายเดือนก่อน +1

    Thanks for sharing the knowledge I love to watch your videos for tips and tricks !

  • @neilheriot2361
    @neilheriot2361 4 หลายเดือนก่อน

    Thanks for the tips, every little bit helps.✌

  • @stevemackelprang8472
    @stevemackelprang8472 24 วันที่ผ่านมา

    Started out with the old red rods,, was a happy day when 5p+ hit the shelves.

  • @wadepatton2433
    @wadepatton2433 8 หลายเดือนก่อน

    Endeavor to Persevere!!!
    one of my favorite lines ever.
    I like your practical perspective. There's too much book learning being passed off on the web as actual knowledge from experience.
    Book learning is okay-but it's just the theory and ideals and often isn't much like REALITY where we do ALL our welding. That's what makes your channel important for those trying to improve their metalworking skills. I remember when the "almighty" Jody only had one product for sale and a double handful of subs. Now he's over a million subs with a complete store and merch and lessons... Keep after it and keep it Chris Taylor.

  • @kpfly1
    @kpfly1 2 หลายเดือนก่อน

    Whered you go man, need more vids! Thanks

  • @allamerican1248
    @allamerican1248 ปีที่แล้ว

    Love the 5P rod! Most jobs around here want a 7018 fill and cap! But if they don't mind I always run 5P all the way out! Just looks cool to me anyhow!

  • @petethesquatchie
    @petethesquatchie 2 ปีที่แล้ว +1

    Can't wait for 6013 & 7018 tips and tricks!

    • @TaylorWelding
      @TaylorWelding  2 ปีที่แล้ว +2

      Thanks Pete I think I’m gonna do 7018 next

    • @petethesquatchie
      @petethesquatchie 2 ปีที่แล้ว

      @@TaylorWelding great!

  • @gunnerlrr
    @gunnerlrr 2 ปีที่แล้ว +1

    With the crappy rod that Lincoln is putting out today it’s hard to find good rods, but it’s good advice. I have open new can of rods that are crap.

    • @TaylorWelding
      @TaylorWelding  2 ปีที่แล้ว +2

      I know you’re right brother Lynn! And they’re getting expensive. Thank you for watching my videos and commenting!

  • @putmeincoach6106
    @putmeincoach6106 2 ปีที่แล้ว +2

    yes sir keep m comin bud welding is always needed

  • @christhompson5784
    @christhompson5784 2 ปีที่แล้ว +1

    Chris, found you through the Ninja. This is a wonderful thing you’re doing, we need more people like you to help the younger generations. My 20 year old son has expressed of all things a interest in pipe welding. I’m not a welder, always had a interest learning. Would it be possible to make video on setting up the welder and explaining the controls in relation to welding.
    Sometimes seeing is easier than reading. I have a 300 classic as well.
    Thank you and keep up the good work.

    • @TaylorWelding
      @TaylorWelding  2 ปีที่แล้ว

      Absolutely I will. I do not have a 300 classic I’ve only worked a vantage 300. But I bet I can help

  • @jacobclark89
    @jacobclark89 6 หลายเดือนก่อน

    I've watched a lot of welding video's and dry rod's aren't talked enough about. Aluminum mig wire goes bad too , it oxidizes over time. the man at my welding supply house swears it doesn't. 😮

  • @atomichydrogenweld2823
    @atomichydrogenweld2823 2 ปีที่แล้ว +1

    Great stuff Chris......thanks for sharing, cheers, Paul

    • @TaylorWelding
      @TaylorWelding  2 ปีที่แล้ว +1

      Absolutely Thank you for watching

  • @atomichydrogenweld2823
    @atomichydrogenweld2823 2 ปีที่แล้ว +1

    great stuff......just rewatched...love it....

    • @TaylorWelding
      @TaylorWelding  2 ปีที่แล้ว +1

      Thank you. I’m glad you like it

  • @davidmorris2875
    @davidmorris2875 2 ปีที่แล้ว +2

    Good stuff. Need all the help I can get!

    • @TaylorWelding
      @TaylorWelding  2 ปีที่แล้ว

      Thanks David!

    • @TaylorWelding
      @TaylorWelding  2 ปีที่แล้ว

      And thank you for the comment it helps the algorithms!

  • @ThirdKindbeyond
    @ThirdKindbeyond 2 ปีที่แล้ว +1

    Stoked!!! Thank you!! I'm ordering a new #welder and going to #learn for #2022 #bahamas #gold #silver #ninjanation

    • @TaylorWelding
      @TaylorWelding  2 ปีที่แล้ว +1

      Nice! I love it! If you have any questions don’t be scared to ask I’ll make a video

  • @americathefree3708
    @americathefree3708 2 ปีที่แล้ว +1

    Love the channel! Thank you sir!

    • @TaylorWelding
      @TaylorWelding  2 ปีที่แล้ว +1

      Thank you I’m glad you like it

  • @benjaminsagau
    @benjaminsagau 2 ปีที่แล้ว +1

    Great tips! Thanks! 👏

  • @patc9102
    @patc9102 2 ปีที่แล้ว +1

    Didn't know that thumbnails was indication of humidity in the rod. Don't know about the Bahamas but if you are inclined for the great white north stop in.

    • @TaylorWelding
      @TaylorWelding  2 ปีที่แล้ว

      If I ever get up there I sure will.

  • @robertbernard-gx5oo
    @robertbernard-gx5oo 9 หลายเดือนก่อน

    I just used a old red to test blue

  • @benb6801
    @benb6801 3 วันที่ผ่านมา

    Hey Chris I gotta question I just got me a vantage 400 trying to find the sweet spot for 7010 5/32 I know you own a vantage 300 what’s a good starting point as far as Amps go with this 7010

  • @haroldmiles3647
    @haroldmiles3647 2 ปีที่แล้ว +1

    Could you do a video on using a gouging tip I’m working with a friend of mine and I’m cutting the lips off of old front end loader buckets and weld in the new lip on and then the cutting edge

    • @TaylorWelding
      @TaylorWelding  2 ปีที่แล้ว

      I made a video on using a torch tip for washing. Same thing

  • @raginroadrunner
    @raginroadrunner 4 หลายเดือนก่อน

    good video

  • @robertyoung4523
    @robertyoung4523 ปีที่แล้ว +1

    have you ever used 7016 uphill on gas pipe root fill and cap negative root possitive fill and cap.3.25 rod 4mm gap.Old scottish welder

    • @TaylorWelding
      @TaylorWelding  ปีที่แล้ว +1

      You know… Most of my welder friends have but I have never had to

  • @SkillzGoOn
    @SkillzGoOn 2 ปีที่แล้ว +1

    I’ve been trying to find a 6010 5p+ downhill cap and no one has one. I’m bothered because I see other guys post nice slick 6010 caps but don’t know what motion to do. Done everything from circles to, triangles, side to side , stepping it. And fish hooks and nothing.

    • @TaylorWelding
      @TaylorWelding  2 ปีที่แล้ว +1

      I’ll try to do that for you tomorrow if I can get a chance

    • @conner3542
      @conner3542 ปีที่แล้ว

      Whip and pause buddy, whip and pause.

  • @pl747
    @pl747 ปีที่แล้ว

    Can't seem to find the old red 6010's any more I would like to have a box to use but can't seem to find them.

  • @williambigham6678
    @williambigham6678 11 หลายเดือนก่อน

    How about the trusty 6011, I know it's a not a pipe rod . Man I use ton of them in the barge repair, pair with the 7024 jet weld. Now, I retired structural welder burn alot 7018 run alot different wire from 211,212,203,232,233,and even 3m. But 6011 still is simple rod .

    • @TaylorWelding
      @TaylorWelding  11 หลายเดือนก่อน +1

      I’m just not familiar with 6011

    • @williambigham6678
      @williambigham6678 11 หลายเดือนก่อน

      @TaylorWelding just think it is close to 6010 without the Roman candle effect .

  • @deant876
    @deant876 2 ปีที่แล้ว +1

    In what I do, I don't weld every day (sometimes a week or 2 of not welding). So I started to buy my rods in 5 lb containers. I know I pay more, but how much is a bad rod going to cost you in time (fixing because of a bad rod) or cost of throwing out bad rods.

    • @TaylorWelding
      @TaylorWelding  2 ปีที่แล้ว +1

      I will ask a long time. Keep them indoors in an old refrigerator

    • @dolphincliffs8864
      @dolphincliffs8864 ปีที่แล้ว

      Keep those rods in an ammo box,20mm is preferable,with lots of dessicant,baked cat litter in old socks works just fine.
      LoHy rods get baked before use no matter how they were stored,lights a bit easier. I got 10Million things to do and 20 million things to do to keep up with it all.

  • @treepro1773
    @treepro1773 4 หลายเดือนก่อน

    Shoot... I stacked before I step... no wonder I haven't made any money😅

  • @ghffrsfygdhfjkjiysdz
    @ghffrsfygdhfjkjiysdz 3 หลายเดือนก่อน

    Is there a huge difference between 5P and 5P+? Just got a good deal on 50lb of 5P for learning and around the house projects.

    • @TaylorWelding
      @TaylorWelding  3 หลายเดือนก่อน

      Not for projects around the house. But there’s a big enough difference when you’re welding pipe for sure.

  • @goatsinker347
    @goatsinker347 2 ปีที่แล้ว +2

    Still haven't found a video explaining why 6010 is used over 6011, especially since 6011 does really well when your machine has a low open circuit voltage. Also, in another video you were kind of saying that the moisture ingress is not something to overly concern yourself with. This was that video about 7018 rods, and how it is not necessary to keep them in an oven. So basically in that video you were downplaying the need for concerning yourself with moisture content, and now in this video you are saying that you should concern yourself quite a bit about the crispness of the rods. And what is toenailing? Is that when one side of the flux refuses to get consumed by the arc? Because those horrid Forney welding rods tend to do that new out of the box.

    • @TaylorWelding
      @TaylorWelding  2 ปีที่แล้ว +1

      I have no ideas on 6013 I don’t use them ever.
      You’re talking about two different welding rods. Moisture does not seem to bother the 7018 as much as it does for cellulose rods. 6010, 8010 and etc.
      And I’m not talking about being wet either. The moisture in the air will get into a 6010 and make it do all kinds of crazy stuff.

    • @yurimodin7333
      @yurimodin7333 ปีที่แล้ว

      I dug and dug on the whole 6010 vs 6011 thing and I finally found the answer. While both rods act similar they are not quite the same thing. The high cellulose sodium produces much more CO2 when it burns vs the high cellulose potassium of the 6011. The higher CO2 creates an even deeper penetrating weld than a 6011. I believe the potassium is similar to what is added to 7018"AC" rods to help them run on AC. This gives a greater chance to have impurities & porosity. For most average home/farm users its not that big of a deal. However when doing code work that potassium is just an unneeded risk..........on another side note for @taylorwelding 6013 is a LOW penetration rod that is awesome for thin material. I always keep a box around for anything thinner than 1/8".....you do have to run a steeper angle to push the slag pool back behind your weld puddle.

    • @bw3506
      @bw3506 8 หลายเดือนก่อน

      ​@@yurimodin73336011 package states a/c or d/c. 6010 d/c only. Difference in flux stabilizes the arc on a/c from what I understand.

  • @vidalsanchez5588
    @vidalsanchez5588 2 ปีที่แล้ว +1

    🤝

  • @face.-
    @face.- 2 ปีที่แล้ว +1

    My instructor kept our rods in this warmer thing

    • @TaylorWelding
      @TaylorWelding  2 ปีที่แล้ว +2

      Yep they all do. Turns out it doesn’t matter.

    • @face.-
      @face.- 2 ปีที่แล้ว +1

      @@TaylorWelding he said moisture is the only reason u warm anyway.

    • @TaylorWelding
      @TaylorWelding  2 ปีที่แล้ว

      @@face.- I don’t warm anything. They get warm when you weld with them LOL

    • @face.-
      @face.- 2 ปีที่แล้ว +1

      @@TaylorWelding that is a fact

  • @swordfish1120
    @swordfish1120 ปีที่แล้ว

    Good vid. I'll try the step stack method. I'm new to stick welding but not new to welding (tig, mig and flux). I have a couple of machines (EL Powertig 200 ac/dc and EL 160STH) and I'm trying out different rods. 3/32" 7018 and 6013 have worked great, but 6011 seem to be problematic (initial start OK, but hard to re-start & rods sometimes catch fire and burn up or glow red). I'm running 70 amps on 110v through an EL 160STH. Is this typical of 6011 rods? Do these problems read like they may be bad or old rods?

    • @TaylorWelding
      @TaylorWelding  ปีที่แล้ว

      The 6010 welding rod offers deep penetration, strong welds, and is great for pipe welding, but requires a DC power source. The 6011 rod provides similar penetration and performance but can be used with both AC and DC power sources, making it more versatile for various welding machines and situations.

    • @TaylorWelding
      @TaylorWelding  ปีที่แล้ว

      I’ve personally never used to 6011

  • @Falco2807
    @Falco2807 2 ปีที่แล้ว +1

    "Crappy welding rods with a crappy machine". Hahaha! Pretty sure that was aimed at me.

  • @bryanlawless5394
    @bryanlawless5394 ปีที่แล้ว

    Hello Chris, was wondering about rod storage in extreme cold. I saw your ammo can video and had a question. I'm in Montana where it can stay 30 below for weeks at a time and then go to 40 above in 24 hours. I don't have a heated shop anymore and have moved everything into my truck. Freightliner FLD 120. Plenty of storage. I was thinking about pulling a vacuum on a similar can with nitrogen for long term storage. Not a lot of people to ask up here because they have heated shops. So if you've ever had the gleeful pleasure of welding up North or know anybody I could use the info. I'm from Texas but have survived this climate 15 years lol. Thanks for any help.

    • @TaylorWelding
      @TaylorWelding  ปีที่แล้ว

      Man I don’t have any idea. I keep mine in a old refrigerator. Put a little lightbulb in it and it’ll keep the moisture burned out.

    • @yurimodin7333
      @yurimodin7333 ปีที่แล้ว +1

      isn't nitrogen one of the atmospheric gasses we are trying to shield against with flux????........JMHO I would vacuum seal 1/2 pound or so and call it a day.

    • @briancarton1804
      @briancarton1804 4 หลายเดือนก่อน

      ​@@yurimodin7333I go to a butcher in Dublin Ireland to get rods vac packed.
      I don't do a huge amount of welding so I like to get my rods vac packed.
      I would like not to have to weld but I took it up because any jobs I set out specifications on welding shops ignore them telling me " that will do " when it's not what I wanted.
      These assholes expect to get paid despite not doing the job to specifications. I don't pay and don't accept the work. Got sick of all the arguments and took up welding myself.

  • @Theragecheaterlolz
    @Theragecheaterlolz 9 หลายเดือนก่อน

    Them red rods are a pain in my ass. They tried to have me bead with them and you just can’t shove them DEEP like the 5p+

  • @boricuaarecibo9259
    @boricuaarecibo9259 ปีที่แล้ว

    I have to do a 3/4" threadolet on a steam header at 6 o'clock which rod should I use 6010 or 6011

    • @TaylorWelding
      @TaylorWelding  ปีที่แล้ว +1

      6010 is all I ever use for the bead. 70+ for the filler 7018 for the cap

    • @boricuaarecibo9259
      @boricuaarecibo9259 ปีที่แล้ว

      @@TaylorWelding all I have is a miller multimatic 215 it doesn't run 6010 well

  • @petethesquatchie
    @petethesquatchie 2 ปีที่แล้ว +1

    Step, stack dimes and nickels!

    • @TaylorWelding
      @TaylorWelding  2 ปีที่แล้ว +1

      Yep!!! Thanks brother. Your the best

    • @petethesquatchie
      @petethesquatchie 2 ปีที่แล้ว

      @@TaylorWelding thank you but not yet, still working on that! :)

  • @geshaun1
    @geshaun1 2 ปีที่แล้ว +1

    Why not just put them in the oven for a little while?

    • @TaylorWelding
      @TaylorWelding  2 ปีที่แล้ว

      When those. Cellulose rods get moisture in them. They are done. If you put them in an oven, they'll crack.

  • @user-vf4vw8ry3p
    @user-vf4vw8ry3p 9 หลายเดือนก่อน

    Thanks for sharing the knowledge I love to watch your videos for tips and tricks !

    • @TaylorWelding
      @TaylorWelding  9 หลายเดือนก่อน

      Glad you like them!