Very, very helpful! Same as some of the other commenters, this was invaluable for configuring this device and preventing wastee energy in a new build property where the device had been pre-setup by a contractor. Top video!
Thank you so much for the great feedback! I’m glad the video helped you configure the device and optimize energy efficiency in your new build. If you have any other questions, feel free to ask!
Really useful video, as the device is very confusing. I was not sure how to set it up at all because no instructions provided, so the temperature dropped in the middle of the night or randomly during the day and I didn't know why, seems schedule mode was set but now I know how to set it on manual, thanks!
@@Youdolooklovely Not sure what you mean, but I set mine on manual mode on thermostat for 20c all day and night and left boiler on all the time, which basically what I want in winter to keep the same temperature all the time. If I would got somewhere longer for few days, I would either turn off boiler at all, or lower the temperature via thermostat, easy
Hi, thank you for the excellent video. I have switched my boiler to manual and we lower the temperature every night before bed. However in the night the boiler is cycling too much to maintain a temperature of 17.5c in the night. It switches off almost immediately as well after being on for thirty seconds. Which settings do you recommend i change to get this short cycling resolved in the night? Does this thermostat come with a Differential Adjustment?
Thank you! So complicated the instructions didn’t say we needed to hold M to “turn on” the timer function option 2 then holding thing timer button works to set the time events
Hi thank you for this great video. I would like to set my heating to stay on from 8am - 10am. Whilst I understand that there is the option to turn on the heating at a specific time, I am unsure if there is a setting that allows you to select the duration of the time the heating stays on ie 2 hours in my example? Thank you
@@simrankainth5458 turning thermostat off with button on top will switch it to frost protection mode. Usually 5°C. Use M button to switch it to "suitcase" - holiday mode. Or if you are using Manual temperature control, just go down with temperature setting to let's say 16°C. Or lower setting, but lower is not recommended to wood furniture or covering.
@@heatingsolutions123 i have switched it to holiday/suitcase mode using the M - my question is will it stay on suitcase mode until i come back from holiday and take it off suitcase mode by myself? thanks! i want it to stay on suitcase mode while i am on holiday but i am scared it will turn off automatically
Hi, I have a combi-boiler and I’ve set my thermostat to timed mode (5/2) with the following: 07:00 - 18C 10:00 - 18C 17:30 - 19C 21:00 - 19C However, after event 4 (21:00), the boiler still switches when the temperature goes below 19C. Is this normal as I expect no heating after 21:00. Is the boiler not meant to turn off after 21:00 overnight and not come back on until 07:00? Thank you!
Might be you are using P02 01 - ON/OFF Load compensation is enabled. ON/Off load compensation is a feature of temperature control products such as room thermostats and programmable thermostats. On/Off load compensation is a proven method of minimising energy use by calculating the demand from a thermostat. As the temperature approaches the required setting, the boiler will fire for shorter periods of time, ensuring a constant temperature is maintained. This not only enhances comfort levels, but also uses less energy. On/Off load compensating products are ideal for use with modern systems in well-insulated houses. Recommended for use with gas condensing boilers. Thermostat prevents boiler working for too long period of time. In this way, the heating works more efficiently, as the return temperature of the heating return is lowered. Condensation is better. Less gas is consumed. Please try setting: P02 02 - ON/OFF standard operation. Boiler is ON till set temperature is reached. And setting: P03 01 - Normal start control.
Try to push and hold ON/OFF button till it restarts. All symbols on display should be visible. Honestly, I do not think it will help. Looks like it is broken.
"Waves" indicate heating is on. Thermostat is calling for a heating. No "waves" no heating. For beginnig to understand your house heating behaviour I would recommend to switch the thermostat to "Manual" mode - no shedule.
Yes, if the battery icon is flashing, it’s time to change the batteries. Unscrew the bolt at the bottom of the thermostat frame, remove the frame, and replace the two AA alkaline batteries inside. Avoid using rechargeables-regular batteries should last a few years.
Hello, thank you but ly thermostat is totally blocked😢I have a locker 😢 instead of the ice icon close to the waves. But. Nobody talk about that. I have tried to switch off but nothing change. Can you help me?
There are two similar looking thermostats with different menu Danfoss TP5001: th-cam.com/video/BTGKSqTgHkA/w-d-xo.htmlsi=6GJybU40FzK6DKiS and Danfoss WT-P thermostat Lock/Unlock: th-cam.com/video/KrxH8B9PwM0/w-d-xo.htmlsi=NEDL2aRxaZPeZasM
Hi thanks for taking the time to make these videos. I have 02.3 on my screen… do you know what that is? I looked at fault codes and can’t see that code In the manual. 👍🏻
Hi! Strange... I would recommend resetting, TP 5001 Reset Video is here: th-cam.com/video/5fzT1mMkY7g/w-d-xo.htmlsi=8XEnOrIMdu7Mc_dI In case resetting does not help - thermostat most probably is broken.
We're in a new home and this thermostat is the worst we've ever come across, the on/of button is jammed on frost protection mode 5 degrees and can't get it off or reset any advice please
@@lynnwebster9764 not sure if this would help. I would try to cut off electricity for thermostat, with main power switch. While thermostat is off would be good to push any buttons on thermostat to drain electricity inside. And then power on. If on/off button is jammed and there is no way to fix it, you need a new thermostat then.
@@heatingsolutions123 thank you, I think we need a new thermostat, to be honest we think we will get a completely different system as this is an absolutely terrible system. So many flaws
@@lynnwebster9764 and there might be something else also. Wrong wiring, boiler setup …. Hard to comment. Off course I would start from changing thermostat as it’s button is stuck.
How do you put the boiler on as and when you need it, instead of setting day and times, it's very rare I heat the whole house when my son is in school, I've not long moved in
I’ve set the boiler to run only in the morning and evening, but it’s still operating outside of these scheduled times. Any idea how to fix this, i have selected 24hrs
Hi, I would select then: P02 02 - ON/OFF standart operation. Boiler is ON till set temperature is reached. and P03 01 - Normal start control. Out of all of these settings: P01 01 - Manual temperature operation P01 02 - Schedule timer 5/2 day P01 03 - Schedule timer 24h P02 01 - ON/OFF Load compensation is enabled. ON/Off load compensation is a feature of temperature control products such as room thermostats and programmable thermostats. On/Off load compensation is a proven method of minimising energy use by calculating the demand from a thermostat. As the temperature approaches the required setting, the boiler will fire for shorter periods of time, ensuring a constant temperature is maintained. This not only enhances comfort levels, but also uses less energy. On/Off load compensating products are ideal for use with modern systems in well-insulated houses. Recommended for use with gas condensing boilers. Thermostat prevents boiler working for too long period of time. In this way, the heating works more efficiently, as the return temperature of the heating return is lowered. Condensation is better. Less gas is consumed. P02 02 - ON/OFF standart operation. Boiler is ON till set temperature is reached. P03 01 - Normal start control. P03 02 - Delayed start of heating. TP5001 thermostat includes an optional delay start feature to hold off the heating for a time on mild days when the room temperature at the start of an event is close to the programmed value. Recommended for use with gas condensing boilers in order to use less gas. In other words, it is an economic mode. P03 03 - Optimised start control. TP5001 thermostat includes an optional optimum start control. This feature allows you to set the time at which you require a room temperature by. The thermostat then calculates how soon before the event time the system must be turned up to ensure that the room is at the temperature by the required time. Heating can be started maximum 120 min before schedule. P04 - Temperature limitation high P05 - Temperature limitation low P06 - Frost protect temperature P07 - Away mode temperature P08 01 - Timer display 24h P08 02 - Timer display 12h P09 - Service due setup. Installer setting only P10 00 - RF Pairing mode OFF (TP5001RF only) P10 01 - RF Pairing mode ON (TP5001RF only) P11 01 - Auto daylight saving ON P11 02 - Auto daylight saving OFF
I have this same thermostat. I am not able to manually increase nor decrease my temperature. It just stays on the same number all the time and the heating icon does not come on. My downstairs one is working fine. Can you advice what I can do please
Hey so I’ve put my setting on manual, please can you tell me if this is right or what setting I should have it on so I can have my thermostat set to so if it falls below 19 degrees it turns on by itself till it reaches 20 and then turns back off by itself, or is this not how this thermostat works. I don’t want to put it on a timer
Helpful. My thermostat was flashing e6. I reset it which seems to have got rid of the e6 message. But now our boiler is on all night from like 11pm - 7am. No heating, just the boiler being on and releasing the steam from the vent outside. Any ideas why? Thanks, Dan.
Usually if heating is not needed, boiler switches to hot water preparation. If hot water is not needed, hot water tank is full of hot water. Boiler goes to stand by mode. If steam goes out - boiler is on. Please check your set temperature and real temperature measured by thermostat. If set temperature is lower you should see waves symbol and boiler should be on. Otherwise boiler should be off (if hot water is not needed) To check if installation is right you can switch from scheduling mode to manual temperature mode.
@@heatingsolutions123 thanks. Yes I've currently had it in manual mode for nearly 48 hours which does seem to have it working perfectly fine. So I'm not sure why it wasn't working fine in 5/2 setting.
Can you only select heating to come on at the times already programmed such as 6.30am and 8.30am. Or can I select different times. I’d like the heating to come on during the night about 3am until 6am
Your video was so clear and thorough thank you! I just have a question. I used your video yesterday to set my thermostat on holiday mode. I set it to 16 degrees celcius. I live in a new build building and the rooms are warm even with no heating (around 19 degrees). I come back from holiday on Friday. I am scared that holiday mode will malfunction by itself and the radiators will get too hot and explode or cause a fire. Do you think this can happen or do you think it is safe on holiday mode?
Holiday mode is nothing special. It is just an easy way of setting a temperature. It is good, house is well insulated as it keeps 19C for a long time. 16C is safe temperature for most of buildings. If you have some doubts there might be some problems with electricity, gas supply, heat supply ... Thermostat or system with remote control could be an option. I would then recommend: Danfoss Icon 2 or Devi SMART thermostat. th-cam.com/video/zIZuP63CJY4/w-d-xo.html th-cam.com/video/vcQJ8Ch77sc/w-d-xo.html
Hi, 4 times change will give you morning and evening heating. Lest say morning 1time (6:00, 22C) 2 time (8:00, 20C) - it means you have used 2 times, but higher temperature will only be from 6:00 till 8:00 (22C). Same with evening.
Hi there, I have a Danfoss Tpone thermostat. My thermostat starts my scheduled heating 3 hours before my programmed time I’m assuming it’s preheating. for example, ( 7am - 11am for 21 is my scheduled heating time) the thermostat will activate hours before my programmed time which I do not want. Please can you tell me how I can set my thermostat to start at my programmed time and not preheat in advance? I have these modes - normal start, delayed start and optimised start. - Thank you so much.
I don’t know what to do, it is stuck on vacation mode and none of my buttons are working and it doesn’t stay on as in once I click power on button it stays on for about 3-6 seconds please help
How do I turn the thermostate off? Do I hold down the on/off button or press twice and hold on the button? And how do I know if the thermostate is off? Failing that how do I take the batteries out?
To turn it OFF - just push once ON/OFF button on top of left corner. Display will become dark and not active. To change batteries release the screw at the bottom of the frame, take frame from the holder. Change 2xAA alcaline batteries. For thermostat reset:th-cam.com/video/5fzT1mMkY7g/w-d-xo.htmlsi=tpzUrQRrMNy1sv9J
I schedule the temperature But on the display it shows Monday to Sunday. I can’t have only Saturday/Sunday shows like in your videos. How can you do it as I would like the schedule different from Monday to Friday and Saturday/sunday? Thanks
Which one did you chose: P01 01 - Manual temperature operation P01 02 - Schedule timer 5/2 day P01 03 - Schedule timer 24h Should be: P01 02 - Schedule timer 5/2 day
Just go to service menu, hold "M" for 6s. Select P01 01 - Manual temperature operation. Selecting higher or lower temperature with < and > comparing to measured will turn your heating on and off
This one no. TP5001 does not have internet. There are other thermostats with App connectivity: DEVI Smart, Danfoss Icon, Danfoss Ally, TP ONE.... Depends what would you like to control.
RX1-S is receiver, TP5001 is thermostat (transmitter) Resetting RX1-S has nothing to do with E6. There is only one way signal from TP5001 to RX1-S Instruction is here: assets.danfoss.com/documents/353563/AN30483490055002-000102.pdf
Manual mode means your room temperature has to be set manually. Usually 22C. And room temperature set point (22C) will not change during a day or a week. If you want to reduce energy usage on night time, or while leaving you have to decrease it also manually.
From thermostat side in case you see "waves" heating should be on. Otherwise something is wrong with wiring. Try to go below 16C, and check is heating started. This would mean you need to connect from NC to NO or from NO to NC. COM on both cases should be connected.
@@mariasajkova4412 you need schedule for 24 hours or just stable set temperature? This setting will maintain set semperature with no changes: P01 01 - Manual temperature operation This setting will let you make own temperature schedule with comfort and economy temperatures. All week days will be with same schedule: P01 03 - Schedule timer 24h
I would then: activate display back light to be on, hold "M" for six sec. and select P01 - 01. You will have Manual temperature adjustment. With < > select temperature you want. Thermostat will maintain it.
Very, very helpful! Same as some of the other commenters, this was invaluable for configuring this device and preventing wastee energy in a new build property where the device had been pre-setup by a contractor. Top video!
Thank you so much for the great feedback! I’m glad the video helped you configure the device and optimize energy efficiency in your new build. If you have any other questions, feel free to ask!
Thanks for sharing. Was really frustrated with my new home thermostat setting and this video is the only resource on internet that was helpful :))
Good to know. Thank you! :)
agreed, literally the worst control panel ever made.
Thank you for making this video. I can now use my heating properly. What a ridiculously overly complicated device this thermostat is.
Glad to help
Absolutely over complicated I'd rather just have it all turned off and use a fan heater if I really need it.
Thank you so much, we lost the instructions when we moved to our new house, this video was much appreciated
Thank You! Good know!
Really useful video, as the device is very confusing. I was not sure how to set it up at all because no instructions provided, so the temperature dropped in the middle of the night or randomly during the day and I didn't know why, seems schedule mode was set but now I know how to set it on manual, thanks!
Thanks for your feedback! I’m glad the video was helpful and that you were able to figure out!
@@demoix how do you switch it to over ride timed without having to go to boiler to change over
@@Youdolooklovely Not sure what you mean, but I set mine on manual mode on thermostat for 20c all day and night and left boiler on all the time, which basically what I want in winter to keep the same temperature all the time. If I would got somewhere longer for few days, I would either turn off boiler at all, or lower the temperature via thermostat, easy
This was a great help just moved into new home and no instructions
Thank You for watching!
Wow! This a dark art!
How did Danfoss get into this ridiculously complicated situation!?
Thanks for your comment! It might seem like a 'dark art' at first glance, but it's actually about precision and efficiency.
Hi, thank you for the excellent video. I have switched my boiler to manual and we lower the temperature every night before bed. However in the night the boiler is cycling too much to maintain a temperature of 17.5c in the night. It switches off almost immediately as well after being on for thirty seconds. Which settings do you recommend i change to get this short cycling resolved in the night? Does this thermostat come with a Differential Adjustment?
Thank you! So complicated the instructions didn’t say we needed to hold M to “turn on” the timer function option 2 then holding thing timer button works to set the time events
Thank you for your feedback!
How do you higher the thermostat please? Its saying 35,c but is on 16c i would like to have it on 24c. Very complicated.
Hi, thank you for this video, really helpful! How can I turn off holiday mode? My display shows the holiday mode is always active
Just push "M" This is explained at min 9:40
Hi thank you for this great video. I would like to set my heating to stay on from 8am - 10am. Whilst I understand that there is the option to turn on the heating at a specific time, I am unsure if there is a setting that allows you to select the duration of the time the heating stays on ie 2 hours in my example?
Thank you
Hi! Heating will be on from 8am to 10am if set temperature will be higher comparing to real.
this is so helpful thank you! if i turn on holiday mode then will it stay on until i turn it off or will it turn off automatically?
Holiday mode works only on manual on and off. Unfortunately there is no timer for it.
@@heatingsolutions123thank you! so if i have it on manual and on holiday mode then it will only turn off when i turn it off?
@@simrankainth5458 turning thermostat off with button on top will switch it to frost protection mode. Usually 5°C. Use M button to switch it to "suitcase" - holiday mode. Or if you are using Manual temperature control, just go down with temperature setting to let's say 16°C. Or lower setting, but lower is not recommended to wood furniture or covering.
@@heatingsolutions123 i have switched it to holiday/suitcase mode using the M - my question is will it stay on suitcase mode until i come back from holiday and take it off suitcase mode by myself? thanks! i want it to stay on suitcase mode while i am on holiday but i am scared it will turn off automatically
So helpful! This saved me because I couldn’t understand a single thing until this video. Great work and much appreciated! 👏
Good to know :) Thank You!
Hi,
I have a combi-boiler and I’ve set my thermostat to timed mode (5/2) with the following:
07:00 - 18C
10:00 - 18C
17:30 - 19C
21:00 - 19C
However, after event 4 (21:00), the boiler still switches when the temperature goes below 19C. Is this normal as I expect no heating after 21:00. Is the boiler not meant to turn off after 21:00 overnight and not come back on until 07:00?
Thank you!
Might be you are using P02 01 - ON/OFF Load compensation is enabled. ON/Off load compensation is a feature of temperature control products such as room thermostats and programmable thermostats.
On/Off load compensation is a proven method of minimising energy use by calculating the demand from a thermostat. As the temperature approaches the required setting, the boiler will fire for shorter periods of time, ensuring a constant temperature is maintained. This not only enhances comfort levels, but also uses less energy. On/Off load compensating products are ideal for use with modern systems in well-insulated houses. Recommended for use with gas condensing boilers. Thermostat prevents boiler working for too long period of time. In this way, the heating works more efficiently, as the return temperature of the heating return is lowered. Condensation is better. Less gas is consumed.
Please try setting: P02 02 - ON/OFF standard operation. Boiler is ON till set temperature is reached.
And setting: P03 01 - Normal start control.
Mine is set at 35, how do I reset it, my light is always on and when I press all the buttons nothink is changing , does this mean it’s broke?
Try to push and hold ON/OFF button till it restarts. All symbols on display should be visible. Honestly, I do not think it will help. Looks like it is broken.
Very difficult stat, this video is brilliant got lost with the manual, would love to download this video for future reference is that possible thanks
Yes you can save it for further watching without internet. Or You can subscribe channel, video will be there forever ;)
We just moved in and have this thermostat unfortunately. I cant tell if it's on and heating or it's off. How do i tell if it's heating?
"Waves" indicate heating is on. Thermostat is calling for a heating. No "waves" no heating. For beginnig to understand your house heating behaviour I would recommend to switch the thermostat to "Manual" mode - no shedule.
How do we change to Manual?
I am certain I have this thermostat but it has a flashing battery. Does it need batteries changing ? I can’t find the manual in the house I moved in
Yes, if the battery icon is flashing, it’s time to change the batteries. Unscrew the bolt at the bottom of the thermostat frame, remove the frame, and replace the two AA alkaline batteries inside. Avoid using rechargeables-regular batteries should last a few years.
Hello! Where is the on/off button on the thermostat? You can't see it on the video.
@@justine-g9p on/off button is on top of left corner
Hello, thank you but ly thermostat is totally blocked😢I have a locker 😢 instead of the ice icon close to the waves. But. Nobody talk about that. I have tried to switch off but nothing change. Can you help me?
There are two similar looking thermostats with different menu
Danfoss TP5001: th-cam.com/video/BTGKSqTgHkA/w-d-xo.htmlsi=6GJybU40FzK6DKiS
and
Danfoss WT-P thermostat Lock/Unlock: th-cam.com/video/KrxH8B9PwM0/w-d-xo.htmlsi=NEDL2aRxaZPeZasM
Hi thanks for taking the time to make these videos. I have 02.3 on my screen… do you know what that is? I looked at fault codes and can’t see that code In the manual. 👍🏻
Hi! Strange... I would recommend resetting, TP 5001 Reset Video is here: th-cam.com/video/5fzT1mMkY7g/w-d-xo.htmlsi=8XEnOrIMdu7Mc_dI
In case resetting does not help - thermostat most probably is broken.
We're in a new home and this thermostat is the worst we've ever come across, the on/of button is jammed on frost protection mode 5 degrees and can't get it off or reset any advice please
@@lynnwebster9764 not sure if this would help. I would try to cut off electricity for thermostat, with main power switch. While thermostat is off would be good to push any buttons on thermostat to drain electricity inside. And then power on. If on/off button is jammed and there is no way to fix it, you need a new thermostat then.
@@heatingsolutions123 thank you, I think we need a new thermostat, to be honest we think we will get a completely different system as this is an absolutely terrible system. So many flaws
@@lynnwebster9764 and there might be something else also. Wrong wiring, boiler setup …. Hard to comment. Off course I would start from changing thermostat as it’s button is stuck.
How do you put the boiler on as and when you need it, instead of setting day and times, it's very rare I heat the whole house when my son is in school, I've not long moved in
I've set them all at 01, is that right
Setting P01 at 01 means you have manual mode. Heating will be ON if set temperature is lower comparing to real. It is more efficient to have schedule.
I’ve set the boiler to run only in the morning and evening, but it’s still operating outside of these scheduled times.
Any idea how to fix this, i have selected 24hrs
Hi,
I would select then:
P02 02 - ON/OFF standart operation. Boiler is ON till set temperature is reached.
and
P03 01 - Normal start control.
Out of all of these settings:
P01 01 - Manual temperature operation
P01 02 - Schedule timer 5/2 day
P01 03 - Schedule timer 24h
P02 01 - ON/OFF Load compensation is enabled. ON/Off load compensation is a feature of temperature control products such as room thermostats and programmable thermostats.
On/Off load compensation is a proven method of minimising energy use by calculating the demand from a thermostat. As the temperature approaches the required setting, the boiler will fire for shorter periods of time, ensuring a constant temperature is maintained. This not only enhances comfort levels, but also uses less energy. On/Off load compensating products are ideal for use with modern systems in well-insulated houses. Recommended for use with gas condensing boilers. Thermostat prevents boiler working for too long period of time. In this way, the heating works more efficiently, as the return temperature of the heating return is lowered. Condensation is better. Less gas is consumed.
P02 02 - ON/OFF standart operation. Boiler is ON till set temperature is reached.
P03 01 - Normal start control.
P03 02 - Delayed start of heating. TP5001 thermostat includes an optional delay start feature to hold off the heating for a time on mild days when the room temperature at the start of an event is close to the programmed value. Recommended for use with gas condensing boilers in order to use less gas. In other words, it is an economic mode.
P03 03 - Optimised start control. TP5001 thermostat includes an optional optimum start control. This feature allows you to set the time at which you require a room temperature by. The thermostat then calculates how soon before the event time the system must be turned up to ensure that the room is at the temperature by the required time. Heating can be started maximum 120 min before schedule.
P04 - Temperature limitation high
P05 - Temperature limitation low
P06 - Frost protect temperature
P07 - Away mode temperature
P08 01 - Timer display 24h
P08 02 - Timer display 12h
P09 - Service due setup. Installer setting only
P10 00 - RF Pairing mode OFF (TP5001RF only)
P10 01 - RF Pairing mode ON (TP5001RF only)
P11 01 - Auto daylight saving ON
P11 02 - Auto daylight saving OFF
I have this same thermostat. I am not able to manually increase nor decrease my temperature. It just stays on the same number all the time and the heating icon does not come on. My downstairs one is working fine. Can you advice what I can do please
I would try reset, here is a video on it: th-cam.com/video/5fzT1mMkY7g/w-d-xo.html
Hey so I’ve put my setting on manual, please can you tell me if this is right or what setting I should have it on so I can have my thermostat set to so if it falls below 19 degrees it turns on by itself till it reaches 20 and then turns back off by itself, or is this not how this thermostat works. I don’t want to put it on a timer
Yes. You are right. Choosing manual setting 19°C will maintain 19°C +/-0,5°C
Helpful. My thermostat was flashing e6. I reset it which seems to have got rid of the e6 message. But now our boiler is on all night from like 11pm - 7am. No heating, just the boiler being on and releasing the steam from the vent outside. Any ideas why? Thanks, Dan.
Usually if heating is not needed, boiler switches to hot water preparation. If hot water is not needed, hot water tank is full of hot water. Boiler goes to stand by mode. If steam goes out - boiler is on. Please check your set temperature and real temperature measured by thermostat. If set temperature is lower you should see waves symbol and boiler should be on. Otherwise boiler should be off (if hot water is not needed) To check if installation is right you can switch from scheduling mode to manual temperature mode.
@@heatingsolutions123 thanks. Yes I've currently had it in manual mode for nearly 48 hours which does seem to have it working perfectly fine. So I'm not sure why it wasn't working fine in 5/2 setting.
Can you only select heating to come on at the times already programmed such as 6.30am and 8.30am. Or can I select different times. I’d like the heating to come on during the night about 3am until 6am
You can select any time you would like to. How to, is in this video somewhere from 6:30....
Really helpful. Thank you!
Thank You for Your feedback!
Your video was so clear and thorough thank you! I just have a question. I used your video yesterday to set my thermostat on holiday mode. I set it to 16 degrees celcius. I live in a new build building and the rooms are warm even with no heating (around 19 degrees). I come back from holiday on Friday. I am scared that holiday mode will malfunction by itself and the radiators will get too hot and explode or cause a fire. Do you think this can happen or do you think it is safe on holiday mode?
Holiday mode is nothing special. It is just an easy way of setting a temperature. It is good, house is well insulated as it keeps 19C for a long time. 16C is safe temperature for most of buildings. If you have some doubts there might be some problems with electricity, gas supply, heat supply ... Thermostat or system with remote control could be an option. I would then recommend: Danfoss Icon 2 or Devi SMART thermostat.
th-cam.com/video/zIZuP63CJY4/w-d-xo.html
th-cam.com/video/vcQJ8Ch77sc/w-d-xo.html
if you switch off the power button does that mean the heating will not turn on apart from frost protection if its off?
Yes, you are right. Heating will turn on only at frost protection temperature is reached.
Mine is set to 20°c on highest temp, no schedule, but its still rising to 24°c 😫
Probably wrong installation or thermostat is broken :(
Hi, when setting timers do you have to choose 4 times a day for heating to come on? I want it to come on just morning and evening
Hi, 4 times change will give you morning and evening heating. Lest say morning 1time (6:00, 22C) 2 time (8:00, 20C) - it means you have used 2 times, but higher temperature will only be from 6:00 till 8:00 (22C). Same with evening.
Hi there, I have a Danfoss Tpone thermostat.
My thermostat starts my scheduled heating 3 hours before my programmed time I’m assuming it’s preheating. for example, ( 7am - 11am for 21 is my scheduled heating time) the thermostat will activate hours before my programmed time which I do not want.
Please can you tell me how I can set my thermostat to start at my programmed time and not preheat in advance?
I have these modes - normal start, delayed start and optimised start. -
Thank you so much.
Hi, please select "normal start".
I don’t know what to do, it is stuck on vacation mode and none of my buttons are working and it doesn’t stay on as in once I click power on button it stays on for about 3-6 seconds please help
I can only suggest to reset it: th-cam.com/video/5fzT1mMkY7g/w-d-xo.htmlsi=sO_CVrOiZKxadF1-
If this does not help, you need a new one.
Very difficult thermostat to understand the operation, even though you explained it very well I blame the manufacturers.
Less sophisticated would be not programmable. Such as RET 1000 or RET 2000
How do I turn the thermostate off? Do I hold down the on/off button or press twice and hold on the button? And how do I know if the thermostate is off? Failing that how do I take the batteries out?
To turn it OFF - just push once ON/OFF button on top of left corner. Display will become dark and not active.
To change batteries release the screw at the bottom of the frame, take frame from the holder. Change 2xAA alcaline batteries.
For thermostat reset:th-cam.com/video/5fzT1mMkY7g/w-d-xo.htmlsi=tpzUrQRrMNy1sv9J
@heatingsolutions123 OK thanks
I schedule the temperature But on the display it shows Monday to Sunday. I can’t have only Saturday/Sunday shows like in your videos. How can you do it as I would like the schedule different from Monday to Friday and Saturday/sunday? Thanks
Which one did you chose:
P01 01 - Manual temperature operation
P01 02 - Schedule timer 5/2 day
P01 03 - Schedule timer 24h
Should be: P01 02 - Schedule timer 5/2 day
How do i do no timer just the heating comes on and off when i turn it on and off 🤷🏻♀️
Just go to service menu, hold "M" for 6s. Select P01 01 - Manual temperature operation. Selecting higher or lower temperature with < and > comparing to measured will turn your heating on and off
Very helpful thank you!
Glad you liked it!
Just want it to use manually with no timer how do i switch heating on and off?..its a ridiculous over complicated system.thanks
Hmm, it is easy:) Just hold "M" for 6 seconds and on P01 select 01. Have you wached the video? :)
Can you only have 4 different times or can you add extra
4 different comfort and saving times. You can not add more unfortunately.
Good afternoon, can you do a video how to install a receiver TPOne -S for boiler ?
Hi, do you have code number?
@heatingsolutions123 087N785600 i dont get any radiators downstairs and the wifi connection drops constantly. RF pairs with receiver ok.
Mine won't come on at all how do you turn off the timer?
Hi:) If you really got same thermostat TP5001. Hold "M" for 6 seconds. At P01 SET 01 - (Manual temperature operation)
I am currently having problem putting the floor heating active. It has been a nightmare
If heating indicator (waves) are on. Heating should work.
why does my heating still come on when im in holiday mode?
Most probably room temperature is lower comparing to holiday temperature.
Can this connecetd to the phone to swict thr heating on and off
This one no. TP5001 does not have internet. There are other thermostats with App connectivity: DEVI Smart, Danfoss Icon, Danfoss Ally, TP ONE.... Depends what would you like to control.
Who do I contact if it’s still not working after all this
Please contact maintenance company, installer or local Danfoss.
I have an E4 error message on mine , will resetting it fix it ?
Resetting probably not. E4 - is RF signal lost. Check if your receiver is on. Get thermostat closer to receiver. Or get thermostat closer and re-pair.
@@heatingsolutions123yeah resetting didn’t fix it but I did re pair it easy enough n it’s working fine now , Thanks for the reply 👍🏻
Hi can i reset my RX1-S ??
RX1-S is receiver, TP5001 is thermostat (transmitter) Resetting RX1-S has nothing to do with E6. There is only one way signal from TP5001 to RX1-S
Instruction is here: assets.danfoss.com/documents/353563/AN30483490055002-000102.pdf
@heatingsolutions123 hi. Thanks for reply. My room stat is a tpsthermalcontrols if this helps. 🙏🏼
RX1-S is still flashing E6 with a bell symbol below it 🤔
Can i send a foto 2u ?
Hello
How does manual mode work?
Manual mode means your room temperature has to be set manually. Usually 22C. And room temperature set point (22C) will not change during a day or a week. If you want to reduce energy usage on night time, or while leaving you have to decrease it also manually.
It's hard to put my heated on
Did you try manual mode?
I have my temp set to 35’c however my heaters arnt turning on and the temp is staying at 16’c what have I done wrong. (It set on manual mode)
From thermostat side in case you see "waves" heating should be on. Otherwise something is wrong with wiring. Try to go below 16C, and check is heating started. This would mean you need to connect from NC to NO or from NO to NC. COM on both cases should be connected.
I cant turn it on for 24 hours 😖any advice ?
@@mariasajkova4412 you need schedule for 24 hours or just stable set temperature?
This setting will maintain set semperature with no changes:
P01 01 - Manual temperature operation
This setting will let you make own temperature schedule with comfort and economy temperatures. All week days will be with same schedule:
P01 03 - Schedule timer 24h
7:04
assets.danfoss.com/documents/latest/242975/BC306936081288en-010201.pdf
I still do not understand. 😒
Hmm, what exactly... Could you describe?
А ты можешь меньше экать когда объясняешь? Чувствуется задержка развития
Hi! :) Thank You for Your feedback. I will try.
Way to overly complicated, what happened to the simpler days struggling with this thermostat atm
I would then: activate display back light to be on, hold "M" for six sec. and select P01 - 01. You will have Manual temperature adjustment. With < > select temperature you want. Thermostat will maintain it.
So basically Manual mode for me 😂
This one is most commonly used:)
I gathered, thanks. I think you’ve saved a lot of people a lot of frustration. Appreciate this video.
Clear as mud
hmm :)
You're thick as pigshit, thats why
Unclear
Thanks for letting me know you're unsure. Could you tell me what specifically is unclear or which part needs more explanation? I'd be happy to help!
Se vocês nao compreende na sua língua, imagina eu que falo português. Hahaha
:)
Hi there. Great video thank you for helping to get my timer settings working.
Do you know. Is there a heat boost. Like you have with HIVE..
Can u make it simpler lol
Sorry, It is how it is :(
you are very bad at explaining this
Hmm, sorry. How can I help you?
Hello! Where is the on/off button on the thermostat? You can't see it on the video.
On/off button is on top of left corner