Social Distancing Detector Using Arduino | Arduino Tutorial for Beginners
ฝัง
- เผยแพร่เมื่อ 1 มิ.ย. 2024
- In this social distancing alarm using arduino tinkercad, we need PIR sensor, Ultrasonic Sensor, RGB LED, Buzzer, LCD, Potentiometer and few resistors. Follow the circuit and code as per the video. Check the github location for circuit and code.
----------------------------------------------------------------------------------------
Arduino Car Parking Tutorial:
• Car Parking Project Us...
-----------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------
Arduino LCD Tutorial:
• Arduino LCD Projects |...
---------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------
Arduino PIR Motion Detection:
• PIR Sensor Arduino Pro...
-------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------
Git Hub for Circuit and Code:
github.com/shazforiot/social-...
--------------------------------------------------------------------------------------
===========================================
Follow me @:
/ thetips4you
/ @thetips4you
/ thetipsforyou
www.thetips4you.com
============================================
Music credit: "Royalty Free Music from Bensound" - วิทยาศาสตร์และเทคโนโลยี
![[LIVE] : ONE ลุมพินี 65 | คู่เอก "จ้าวเสือใหญ่ vs ผึ้งหลวง"](http://i.ytimg.com/vi/TDpOh5eEJKw/mqdefault.jpg)
Hi did you know what stand for rpin and bpin and the function of this two command that i told you right now ? Could explain to me ?
Which type of connecting wires used
nice video. just wanna ask if what code can i input if i want the lcd to also display the distance of the other person? thank you!
Thank you. Please contact me through Facebook. We will check on the issue.
Hi ... This project already function well but for the buzzer, it always turn on and noisy while i keep away my distance from ultrasonic sensor so what should i do for turn off the buzzer when i keep away my distance from ultrasonic sensor? Did you have any tips, suggestion or commandline for this problem?
Please check the code if it working in the reverse. The distance calculated is used for buzzer to activated.
will the whole connection method in this project be the same as this even though I use arduino nano ... if there is a change can I know how it is?
Yes, no change.
hello how can I connect tinkercad to node-red?
Can I ask why we need to use both ultrasonic and PIR in this project?
PIR is a motion detection and Ultrasonic is for finding the distance from the object.
What kind of resistor did you used on this project ? Example 2.2k ohm or what ?
220 ohms, less than 1 k
on this project how to on or off this social distancing project ? What i mean is in this project have switch or something to power on and power off while we used it or not ?
If you are mentioning about detection it will be based on sensor output, if you are looking on Arduino as whole system it depends on your power supply to Arduino.
Does this detect distance between 2 people or between a person and the sensor?
If you keep the sensor on one person then it will detect the distance from that person to another moving object or person. :)
@@Thetips4you thank you so much!
In source code of this project use distance of 1 meter or not. If not i could just change it right without any error right ?
Yes, you can change the code to adjust the distance.
if i dont want the PIR sensor because there is not muc difference between ultra sonic and pir, i can just remove the pir and its code?
Remove the part of the code that uses pir check.
@@Thetips4you its not gonna affect the buzzer ? Or the other functions?
No. You need to adjust the code. That's all.
@@Thetips4you just remove na PIR code and thats it?
And the buzzer is is not producing a sound when an object is very close to the ultrasound sensor , l am only seeing the readings of distance on on the serial monitor , and nothing is being displayed on the LCD
Check the connections
What kind of potentiometer did u use ? Example : 2k or what ?
You can use 2k to 10 k. That won't be a problem.
Hi... this project are awesome and i"ll success when i finally doing this project but why brightness of lcd didn't comeout .... could you explain to me or you could give some of commandline source code for brightness of lcd ?
You can use a potentiometer to control the lcd lights.
If we want to detect the distance between two person then how could it be possible on tinkercad? Because here you are just calculating the distance between sensor and object.
Please help.
One sensor should be on one of the person. The distance is relative to from the sensor is there. So you should consider the person is wearing a device which sends the signal to find the distance of the object in front of him.
@@Thetips4youAlright.. Understood.. Thanks for your reply😊
You are welcome.
Hi, the ultrasonic sensor detects distance so why are we using the PIR sensor?
PIR is used to detect motion and based on the motion the distance will be calculated.
@@Thetips4you So there is technically not much difference between them?? so can we use ultrasonic sensor instead of pir sensor ??
I can only see readings on the the serial monitor and nothing on LCD and the RGB light is not even turning on , what can be the problem
Check the connections & code is right.
Hello sir what are all the hardware tools you used?
Use the components as shown in the video
May I want to know how much safety factor for this project? How to calculate?
Thanks
Sorry, I don't answer for this question.
What is the resistance of that resistor connected in lcd
220 ohm
@@Thetips4you I'm gonna try it tomorrow once again thanks
May ik WT difficulty u faced during the project?
Nothing specific. Are you facing some issues?
can you do it with raberryPi, or just do code only
Yes, will have to do with python code.
@@Thetips4you okay, can you do it please wanna compare it with mine. let me know when done👏👏👏
Hello is there a flowchart and block diagram for this project
All diagram & code is available in the github.
Hi guys which programming language was used to write that code
It's Arduino programming which is basically a C++ language.
Will it detects if anyone comes from beside or backside to us
No. The Ultrasonic and PIR should detect the motion. You can add more sensors to cover all areas.
If i use arduino nano... The code still same ?
Yes.
I did the same connection as you told bt sir display is not working so what should I do now?
It should work. Double check your connections. Contact me through fb if still not working.
Okay thanks
How much far PIR sensor detect on this project ?
Depends on the pir sensor specification. Please check manual for sensor model.
Please provide Hardware Components set link so that we can buy online those components
Sure. It's a good suggestion.
@@Thetips4you Thank you please provide that components link as soon as possible
nice video ,can i get the schematic diagram of this???
Please check the video description. You should get the details in github link
may you please make me a code that is different from this one but doing the same function
Why do you need a different code if this is working?
Does this code really work...bcz i am not getting output
Yes, it should work. What is the issue you are facing.
@@Thetips4you I am not getting any output even if i move pir sensor
Kindly check the pir sensor pins are connected correctly. Also add a serial output for reading to see if you are getting any movement detected.
@@Thetips4you Yeah,thank you
I am not getting any output in the lcd display
Hy guys l have done all connections and uploaded the code onto the Arduino , but l cant see any reading on the LCD
Debug the issue by checking the outputs using serial monitor
What is function of potentiometer on this project ?
Potentiometer is to control the brightness of LCD.
@@Thetips4you thanks
Hellooo guys , is the more practical video which shows connections being done , showing the working principles
You see all connection and code here. Checkout your connections to make sure everything is as per diagram.
Can I get your source code for me to see it clear. thanks😇
Yes, you can check the GitHub link in the video description.
Mi daggara E project document undha....??????
What document you want?
@@Thetips4you I am dng this as my final yr project
So will u provide me document of this project..???
Hello sir I'm not getting any output on LCD plz help..
Check the code and circuit first.
Where should we connect the battery sir
We are not using battery power in this circuit. We are using Arduino 5v power.
Hy guys where can l get that code
Check the GitHub link
Can you send me the code for this
Please check the video description. You will be able to see the GitHub link for the code.
Code c++ language ey na..?
It's Arduino program.
Thanku
Hello sir what are all the hardware tools you used?
Kindly go through the video for the components.
Hello is there a flowchart and block diagram for this project
All diagram & code is available in the github.
Hellooo guys , is the more practical video which shows connections being done , showing the working principles
Check the complete video. All connections & details are there.
Hello is there a flowchart and block diagram for this project
All diagram & code is available in the github.