Gas Detecting Alarm system with Arduino
ฝัง
- เผยแพร่เมื่อ 15 ก.ค. 2018
- In this project, I make a gas detecting alarm system using an Arduino and a gas sensor and display messages using an LCD.
Here is the Circuit Simulation along with the code available on Tinkercad:
www.tinkercad.com/things/k0sS...
Here is the Arduino Code for Gas Detecting Alarm System in Github.
Thankyou!
gist.github.com/Brinda-elec/3... - วิทยาศาสตร์และเทคโนโลยี
Your clear explanation made my mind to understand it as clear as alphabets .....thank you soo much for your efforts
Congratulations sis ... keep it up
thank u soo much madam.i followed steps as it is and this is my 1st project so i got selected
Thank you so much for the video and related links 🤩🤩
Thank you so much sir for your efforts 😊, I understood all the concepts very well!!:)🙏🏻
thank you so much sis, bless you
Thank you so much, your video really help me a lot. Kipidab don gibab
Thank you this video helped me in my college project.
instagram.com/assignment.nerd could do all your assignments
@@Just_Moh_it thank you for sharing
Hi your project is fantastic, but what type of gas sensor do you use? MQ-2? Thanks :)
Thank you so much ....Keep it up!!!
how does the sensor measure the voltage? i couldn't get that right.
thank u soo much, it really helped me.
Thank you so much maam for the video, Could you please tell me how to add DHT11 library in tinkercad
My sensor is not detecting any smoke even when i bring the smoke near it. i also increased the resistance ..what should i do now
Thank you girl!
It's working 😊
can you please help regarding this project
thanks..it was so helpful for my project
i just modified it a bit
the link really helped me alot thanks sister
I want to add GSM for message alerts in this project, can u help me please?
What did you do?
in my case, no message print in the lcd display. How can I solve this problem? I Wrote the same code that you provide.
Awsome sister❤️
can you make a video of a wifi module with lcd in it tinkercad circuits
Thankyou.It worked well
What is the range of the Gas Sensor? How much mm?
Thank you sis.. Nice Work.. Keep going..🤍
Thank u so much 😘 u explained very well 🙏❤️
i know it's kind of off topic but does anybody know of a good place to watch new movies online ?
@Kevin Walker Flixportal xD
@Davion William Thanks, signed up and it seems like they got a lot of movies there :) I appreciate it !!
@Kevin Walker no problem :D
mam muje is project me relay or buzzer manually oontrol kana h. push battan se ki mein relay ko 1 se 10000 ppm tak set kar saku cut out ke liye mam same aese hi buzzer ko karna h.
mam fb par aap ka page kis name se h.
Do you have a schematic diagram for this?
what is sensorthresh use?
please reply fast
May God give you happiness of all the Universe
It worked thanks alot😊
can u plz say the above connections without breadboard
ohhh thank you it was really helpful am so happy for what you have done I was able to repeat but I got an issue when it's clear and safe it was supposed to blink the green light mine it didn't and when it is alert instead of the red color the green was blinking so what can you help me about this
can you give the code?
Change the code as green to high and red to low.
@@a_ly_sota5138 yes pls give code
Thank you for your demo, simulation and code . please post these type of experiments its very helpful to us
my LDC does turn on but i have no text on it.
i have no error in my code
Please make a video on earth quake detection using accelerometer and Arduino
Which software u uesd this circuit design
Thankyou For This... I am Just Facing One Problem Even After Changing The Resistance of The Resistor The Gas Sensor is Not able To tell Me That There is a gas leak
Mam, can you provide the block diagram for this project.
what was the error how to fix them
why it is showing 306 in the serial monitor?
how to add an ekzos fan?
I have a question, can uh tell me
How will we get the message on our phone when there is smoke alarm.
Like is there anything.. That the output will make a graph or send a message to the user... When the red light gets on
Yes u can but need server for it
How can I make this system in I2C?
There's one error D4 D5 D6 D7 of lcd is connected to 8,9,10,11 of Arduino.....and you've bymistakely said to connect it on 7,8,9,10 of Arduino
can you tell which browser you are using
Congratulations keep it up
Thanks a lot :)
like others stated, can you provide the code sir
thank a lot
Real time cost of this system ?
In my LCD it's not displaying anything
Thanks. Can you tell me what should I do to add any nearby fire station or ambulance to inform?
That might need a lot of additional code, add an IF loop and write a code that would connect to your phone to automatically give a call to the ambulance. You might need to add additional components in the schematic as well.
@@MindfulBytes If its not a problem, can you suggest me where and how I might get that code? Also the additional components to use.
gracias te amo mucho :33 sos la mejor
You are welcome!
Thanks madam
Thanks
Can u send me circuit diagram of this?
Didi garbage text is coming on lcd screen. How to correct?
someone can explain this line int sensorThresh = 400;?????
Man I have error in # include
thank you soo much
You're welcome!
I am facing a problem from your project. This project is running for a single time. After that, there are detecting the gas at gassensor automatically. Can you give me the solve?
Are you doing a hardware project or simulating it digitally on tinkercad? If you are facing a problem in tinkercad, try moving the smoke away from the gas sensor, then rerun the project and bring the smoke closer. You should be able to run the project once, and test it several times with smoke being closer or away from the sensor. Also make sure you have written the code in a loop, so that it can run continuously. I am not sure if I have understood your question correctly, so let me know if this works, else you may post a question detailing the exact problem you are facing.
can u please leave a drive for codeof circuit
THANks im using this as my project, hopefully i pass
You can do it!
@@MindfulBytes i passed
Tq mam
how did you bring smoke
by clicking on the gas sensor
thanks didi
Most welcome 😊
Pleasa sent me the code because this code have error and I don't know how to get the code in tinkercad
You can find the entire simulation along with the code here:
www.tinkercad.com/things/k0sSpdKPVEE
TE AMO BB ♥
can you please help for this same project as in our case , The message on LCD is not getting displayed?
please reply as soon as possible
So actually I want to tell that the one who wrote this comment is my mentor in this project
The main problem is that we seen ur video in which u thaught how to make an LPg leakage detector
But due to any circumstances there is no response on led and even on the mq 135 sensor can u pls connect to me through my email
Harshpathak629@gmail.com
And help me for this project
thanks
@@harshpathak2503 Are you making a hardware project or making it on tinkercad? Try this link www.tinkercad.com/things/k0sSpdKPVEE-gas-detectingalarmbrinda and click on simulate, as well as check your code with mine as given in the same link under code tab.
Try simulating this design as the message is being displayed on the LCD. www.tinkercad.com/things/k0sSpdKPVEE-gas-detectingalarmbrinda and if you have any problems, I would try helping out.
PPL WEARING HEADPHONES;
hope u enjoyed it XD
can you please reply me the code for this alarm system
you found the code?
I want the code too
Code is added in the description
gist.github.com/Brinda-elec/3109690bcaa896bcc9401a9a8b36487d
@@malaaak3428 gist.github.com/Brinda-elec/3109690bcaa896bcc9401a9a8b36487d
@@a_ly_sota5138 gist.github.com/Brinda-elec/3109690bcaa896bcc9401a9a8b36487d
Hello mam can you send me the project report
Hlooo i want your help in my project i will also pay please respond
Can u send me ppt for this
can you send the link plsss
gist.github.com/Brinda-elec/3109690bcaa896bcc9401a9a8b36487d
Can you send me the code for this please
you found the code?
gist.github.com/Brinda-elec/3109690bcaa896bcc9401a9a8b36487d
What is sensorTresh?
Please
can you send me the code
gist.github.com/Brinda-elec/3109690bcaa896bcc9401a9a8b36487d
my LCD is opening but not not displaying text. I followed their respective order in declaring the 6 numbers in connection :/
Use my simulation from tinkercad to check and correct your connections. Also compare your code with the one I have written. Both the code and circuit are available here:
www.tinkercad.com/things/k0sSpdKPVEE
@@MindfulBytes Actually I saw my mistake last night. I don't use the same connections as shown in your circuit since I'm working on different project. Then I realized that I connect one wire on the no. 1 slot (then I placed it on slot no. 5) on arduino board then it works. Thank you for the video and your reply
thank you for asking this question I was facing the same issue.
@@MindfulBytes thank you for replying I also had an error in connection, after seeing your circuit carefully I figured out the issue and resolved it.
Mam plz send me the code
gist.github.com/Brinda-elec/3109690bcaa896bcc9401a9a8b36487d
moro plz
Why is this girl in a rush??