MBS E- mountain board
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- Description on how I built the electric part of my Mountain Board Sports Birds 95 Comp
MBS Comp95 Birds
Flysky GT2b remote w 3d master cho case mod
Momentum boards chain kit 62-12 #25 chain
Boardnamics 6374 basic Mounts x 2
6374 170kv 10mm shaft 3250 watt motors x2
12 tooth 10mm x2
pelican 1040 mini case
Dual fesc 6.6 flipsky
80mm computer fan
3d printed duct 85% infill pla
rear bike lights with 3d printed mounts x2
Amass anti spark 3d printed key case 50% infill pla
1800 Apache case
Graphene 6s 12ah x2
micro lipo monitors for each cell x2
Akaso 2500mah 700w headlights x2
I also put 4 ounces of green Slime in each tube.
Misc.
10 gauge wire
xt90 connectors
cable gland
cable covering
shrink wrap
soldering equipment
4mm bullet connectors
m3 captive nuts for battery box
misc amount m3 screws
current mode with sensors/ no reverse with brake
5.17 gearing
36 mph top speed
12-14 miles on road
8-10 miles off road
I turn it down to 60 amp each motor and like it better
80 amp per battery is fine
20 amp regen braking
12 amp regen coasting
35khz from default 25khz to quiet down the harmonics at high speed.
most other setting are stock in the Vesc tool.
Nice build, I’m building one with the same board, same size batteries but I got the motor mounts and gears from Lacroix.
Nice. Good luck with your build. Thanks for watching. :)