MBS E-Mountain board after 1357 miles
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- Some advice on tires and batteries
MBS Comp95 Birds
Flysky GT2b remote w 3d master cho case mod
Momentum boards chain kit 62-12 #25 chain
Boardnamics 6374 basic Mounts x 2
6374 190kv 10mm x2
12 tooth 10mm x2
pelican 1040 mini case
Dual Fesc 6.6 flipsky
80mm computer fan
3d printed duct 85% infill pla
rear bike lights with 3d printed mounts x2
Amass anti spark 3d printed key case 50% infill pla
1800 Apache case
Graphene 6s 12ah x2
micro lipo monitors for each cell x2
Akaso 2500mah 700w headlights x2
I also put 4 ounces of green Slime in each tube.
Misc.
10 gauge wire
xt90 connectors
cable gland
cable covering
shrink wrap
soldering equipment
4mm bullet connectors
m3 captive nuts for battery box
misc amount m3 screws
current mode with sensors/ no reverse with brake
5.17 gearing
36 mph top speed
12-14 miles on road
8-10 miles off road
I turn it down to 60 amp each motor and like it better
80 amp per battery is fine
20 amp regen braking
12 amp regen coasting
most other setting are stock in the Vesc tool.
Great video! Cute dog he’s very persistent :) I’m building pretty much the same board except I’m using the blue 20 ah lipos 6s and a Foxbox plus. I too want a battery built out of the 21700 molicell but out of budget. I already had an otterbox casefor the batteries and a pelican case for the Focbox. I just ordered tat deck brand new. Was going to get the pro version but their sold out. Plus if think I will prefer the flexibility of the comp 95 deck anyway. Just bummed about the plastic top trucks that will have to be changed out for alloy. Plan on doing a little jumping etc. Where did you get your chain drive components from? And do you have a link for the new tires? Thanks another vid of your riding would be great:)
Thanks. Jack russell. Shes is nuts. Loves to play. I bought the chain drive from www.momentumboards.com/ not sure if he still makes them. If your handy scooterparts.com has the sprockets not drilled though.. and chains, Ace hardware spacers, longer hardware etc.. I bought the tires on Amazon. just search 200x50 scooter tires. you can buy packs of two with tubes for 22 bucks. My black 12amp graphenes finally died so I am battery less right now. Hopefully I will weld up the 48 Moilicels I have aquired for two 6s4p packs. I'm not liking my spot welder battery right now. I need a new car battery for it to work correctly.