@@NotEconomicallyViable Bullet proof engines for 504 diesels, if you maintain them properly are going well over past 1 million km.. Specially for harsh & remoted places from countries like Colombia, Argentina, Africa, Algeria, Morocco, Libya, Sudan, Niger know them very well
@@poplaurentiu4148aqui para o Brasil tambem vieram mas infelizmente a maioria virou sucata, tenho uma a 4 anos q já resgatei do lixo, não está perfeita mas aos poucos ficará ótima
The good thing about 504s and the old 404 pickups was that they were built on strong chassis’s so you can take the body off and weld or replace panels very easily -- that is why so many counties in Africa still have them on the roads -- you got a real gem there . Some where in France you will be able to get replacement panels or even Kenya where they were produced up to about ten years ago .
You could, but at that point this car would have eaten almost ten times the money you would need to buy a good one. In this case, with the steering wheel on the drinker side I would just check if any of drinkercar parts can be used, if so buy a good solid car from France and convert it. The tailgate from this one could make some Peugot freak to let go of some of his money to get himself a nice wall hanger.
I worked on a 504 car back in high school, but gave up on it when the springs came up through the rusted front shock towers. I wasn't much of a welder then (and my welding is getting rusty again now, no pun intended.)
Peugeot still make parts for all their cars models since 1920, it's expensive but we are so proud of our cars that passionate people in Sochaux can restore any Peugeot/Citroën ! Some 504 are still on the road today, like new !
@@Igzbl78 Agreed, PSA (now Stellantis) seem to inspire a proud loyalty in those who own them. Probably because they're damn loyal cars drivetrain-wise & folk have used/abused them long enough that they endear themselves to their owners. (Can't speak for Euro-3 upwards mind, but then what modern cars *are* reliable in the way they once were?) We're still running round in our Xantia 19D-auto (my forever car) & currently have a ZX 19TD being reassembled for summer giggles. I understand this truck was pretty far gone from the video so far, but it does make me sad to see it no longer shows on the DVLA database. It's one I would've got my welder out for (and I don't even like welding much!) and at least given it another chance. Would love to own a 504/505 one day
I have the same one, 1990 model, it takes me every day to my workshop. It is an indestructible war tank, excellent job bringing it back to life, Greetings from Argentina
The 504 (and the 404 and 403 before it) was a stunningly tough vehicle. The 505 was the last of the line and there's never really been a car to match since.
@@mikescudder4621 Half a million miles from one of these was not uncommon. Pug engineering was superb and steel-bumpered Pugs were the best. The great shame was that the bodies were so rust prone in the sixties and seventies.
@@mikescudder4621same in Argentina, you can see some from time to time, the car version was even more appreciated and there's still people that use them on the racetrack even.
I have 404 wagon(s) here in Oz. IMHO the best car ever made. I'd kill for this late 504 diesel ute. Well well worth repairing. Leaves the Japanese utes of the era and beyond, for dead. BTW lots of valuable and hard to get bits on this 504 ute.
I hate modern cars full of major problems computer this computer that no bloody good if you breakdown in the middle of nowhere .Retired old school mechanical engineer .👊
Visiting France for vacation a few years ago I saw the predecessor of the 504, a beautiful restored 403 pick-up truck, still working as a daily driver on a farm and in the wine yards! 😍
I see a 404 pickup with a wodden bed almost every day and I bet the driver is the original owner because I've seen him driving it for over 40 years now. 🙂
Grapes MUST be transported by a Peugeot to get the right taste. Port must be transported in wooden barrels by sea and baguettes taste best out of the back of a beaten Renault 4 Van.
I saw lots of these amazing vehicles in Tanzania and Kenya in the late 1980’s, they were incredibly rugged and managed the challenging terrain. Great video, love the old Peugout
These vehicles are considered legends here in kenya. Owning one (the saloon and station wagon) in the 70s and early 80s was a status symbol. The speed was legendary
I had a 504 at work, you can change gear when rolling without the clutch, up and down the box and they will cruse at 105mph all day long on motorway. There's a torque tube on the rear axle. Basically a great truck to have.
Takes me back. My Dad had an early 80's 7 seat 504 estate in red. It could take the whole family anywhere in comfort and at surprising speed. Good memories as a newly licensed teenager of taking to an indicated 100mph. He ended up selling it 25+ years ago for £500 and I think it was exported to Africa. It's probably still doing a job there!
Awesome. I drove a 504 GLD car for quite a few years with the same XD2 motor. The 504 is so robust as you've found out it's the body work that will always suffer in our climate. 504 was made until year 2000, not bad for a car released in 1968. The XD2 is an Indenor engine, and a 6 cylinder version was also produced by Volvo Penta for marine applications. The 504 saloon held together despite the bodies because the engine/gearbox had a solid torque tube bolted from the gearbox to the rear diff/axle, so you could lift the body off the engine/transmission assembly of all 4 wheels, even the Peugeot factory manual showed this procedure! 504 pickups command a fair few shillings these days, don't scrap it, many bits n pieces are still available as they were used in cars like the 205. I'd rather like an early 505GLD 2.3 if only I had space and spare cash, for now it's my 205 waving the Peugeot flag. Good luck!
😂 The Aussie role play bit was pretty entertaining. I love seeing all of the interesting messes that you manage to get into with these old vehicles. Keep up the great work mate!
Hi, I was working as a mechanic at a Peugeot main dealer back in 1989, I love the 504 pickup, its a great vehicle. If you decide to scrap it because of the extensive rot I would be interested in the engine, I put one in a series 2a land rover many years ago, big improvement on the rover diesel. The down fall of the 504 was rust just like the citroen c15 both good vehicles but rust buckets. The old duffer.
Hi, none of the body panels are available, even pattern one's now, so you're have to make them, which is no easy task. We manufacture the Land Rover rear tub panels, and I wouldn't want to make just one set of panels for this. The development work alone is hundreds of hours of work. It's a real shame that it's so far gone.
@@NotEconomicallyViableThere were lots of original body parts in Kenya upto a decade ago or so. Occasionally but very rarely they do crop up for sale as cheap old stock. disposal
I have sooooo missed your video's. The humour and your "everyday is a school day" attitude has to make this one of my favourite channels. The "will it start" videos are along the line of the 6DDiesels (professional mechanic) content, but are at the opposite end of the spectrum for competence which you yourself admit making the format a winner.
I had a 1975 504 Peugeot diesel car that I put over 200,000 miles on so I have had a lot of experience with this model. One of the problems was the engine was a wet cylinder engine and every 100,000 miles I had to have the engine repaired as the wet cylinders leaked water into the oil and I had to have it repaired. This was the main weakness of the model, except for the rust!
Good man, i recently picked up an '86 505 GRD estate that somehow avoided being exported to Africa to end up as bush taxi, you cannot beat the XD engine!
Like others I have missed your videos. I have had two 504 pick ups and done something like 400.000 miles between them towing heavy trailers and they lived on. I have used 504's in South Africa. Either the 2.0 or 2.3 are bomb proof, especially if non turbo. I had to stop myself running upstairs and messaging you when I saw the video. The sills on the trucks are not structural as there is a ladder chassis. If the buck is shot you could take it off and replace with a home made bed or even a tipper. In bleeding the brakes, it might be easier with the engine running as they are pump driven from the top belt. Indian Tata trucks had the same set up using peugeot diesels. The 5 speeds suffered from worn fifth gears but yours is 4 speed. The earlier oil bath air filters are the reason there are still thousands of 40 year old 504's in Africa. Thank you for posting, I would consider it myself!
You're more Hubnut than Hubnut himself and had me in stitches 🤣 as if you're Laurel and Hardy all rolled into one 😅. These pickups were available in Zimbabwe back in the days of Rhodesia but we never got them in South Africa. Somebody brought one to South Africa and I saw 👀 it with its Rhodesian registration plates.
I passed my driving test at the fist attempt in a 404 pickup, column gear change and handbrake up under the dash. The examiner had never seen one before. My father then purchased a 404 estate brand new in 1970, in the late 70s we moved on to a 504 1.9 diesel estate and also a diesel 504 2.3 saloon. The 504s were really good, but the 404s were even better, I sure wish I still owned both of those.
I drove 404 pickup when I was 12, loaded with hay, or at times firewood; those gears,running from bottom to up,😮😅, it was quite awesome,,,, unlike other half gears, from top to bottom,,,,,😀 like Toyotas, Nissan,,,,,
Hi,I've just found and subscribed to your channel, I'm loving the Peugeot pick up,well worth doing, fabricate inner and outer sills,floor repairs,when did you last see one, every french campsite seems to have one, for on site use,bins etc in various states of bodgery.
I once owned a Peugeot 505 Turbodiesel....loved it! They are tough old diesel engines. Until seeing this video, I had no idea Peugeot made a truck version of the 405. I'd love to have one.
fanatstic find,i used to work for Peugeot/Talbot back in the middle 80's & we had a 504 pickup as a workshop truck it went through hell & never let us down fanatstic pickup,i remember when they stopped making the 505 & owners esp the 505 Estate wrote letters to Peugeot begging them to carry on making them they were & still are a sort after motor,but great to see you got your 504 running again
You can re-connect to the original fuel tank now that its running. Check for a separate oil reservoir on the mechanical FI pump. A lawn and leaf blower would be my first choice to remove detritus from under the bonnet and interior spaces. Great job. Narragansett Bay.
Thank you for the video sir. Before start working/ diagnosing, It was great power washing or blow dirt's from the engine bay .That helps to visualize defective parts easily, like wire cut, leaks etc.. .
These old Indenor Diesels have brought 2 generations of my family home, loyal humble with that particular Indenor Diesel rattle. My dad had a 404 in the sixties that did an incredible 300000 kilometers and I got a 504 Station wagon as a company car visiting ships all over Europe as a service engineer, these cars are real epic and come from an era when Peugeot made super reliable no nonsense cars. My 504 L Estate had the same dashboard.
Those old Indenor lumps are pretty bomb-proof. The 504 is an absolute legend, but as you've found out, they are total rust traps. I had a 504D Familiale 7-seater. It was probably the best car I ever had.
In Europe parts are more available than here in South Africa. In Cape town there is a place where they rebuild rear classic cars and engines. My bakkies as we call them here (L.D.V.s ) I fixed them my self . To replace rusted metal plates with new ones is very time consuming. Good luck and don't sckrap its parts.
This is so cool! 😎 My old man had a removable Truckman fibreglass shell for the bed, and I remember he left it off in the garden with the window hatch open, I climbed in it, the glass hatch closed behind me and I was trapped inside it for about half an hour, felt like hours as a 6 year old 😂 I only got out because the neighbours heard me crying my eyes out trapped inside 😂 It was well hot 🥵 He said, the 504 was the best truck he ever had, proper solid workhorse 💪 It was a pale blue and is the first car I have memories of😊 Good luck getting her back on the road dude 🤘
My late farther had several of these great trucks just to let you know the cylinder heads crack between the swirl chambers and blow loads of greay smoke when the engine is hot on ildle very common. We had problems 25 years ago getting parts we ended getting several cylinder heads off the 2.3 liter diesel ford Sierra and had them rebuilt and kept in stock lol. If you want really rare Peugeot 504 pick up hunt for a 4wd one we had one it was brilliant it was the last vehicle I sold 8 yrs after my farther passed great memories great times wish I could go back lol.
I usually change the oil of my oil bath filter after I changed the engine oil. I put the old engine oil in there. No need for wasting new oil for the air filter if you ask me. I can't believe how good that thing ran after sitting for so long
That Peugeot has more holes than a golf course but it's not surprising it runs 😅 you Sir are a purveyor of tat at the moment but we wouldn't expect any less 😂 bonus points for getting the other half on board too!
I never knew these existed, it's actually quite a good looking truck and those old French diesels in my experience will just run forever. It's also in that era that you can run them on cooking oil
This truck is complete - a complete load of... potential lets say. 😃😃 Al from 6D Diesels would be proud of you 😎😎 Love the new homestead. Pleanty of room for all your potentials😂😂
Haha that brings back memories, we had our work experience at school, I was at a Peugeot garage and they had a 504 as the runabout, parts hauler, break down etc. it was brand new. Well done, good job
I remember my dad buying one. There was big hype around them in Zambia. Ever farmer had to have one! The other lingering memory was him having to strip the engine at our cottage on the shores of lake Malawi. He laid down some jute sacks and laid the engine Components on it!. It seized on my brother who was driving it down from the FARM. ( SECOND TIME.. THE FIRST COMING BACK FROM LUSAKA.. CAPITAL OF ZAMBIA) He was the most able mechanic I know. He was able to put it all together, get it started and have it driven back with a full load back home!
Still quite few running in Europe like France, Spain, Portugal and lot of them in 1000s all over Africa on daily use. The only problem is rust but you still can get all the parts and panels for it, plenty in scrap yards in France and neighbouring countries. Good workhorses they are. Even Citroëns 2cv made the pickup trucks. Very handy around farming communities and builders...ports also use them and lot of different businesses too...
No surprise at all when she fired up they are bomb proof and go on forever. I transplanted one of those into a series landrover in 2003 donated from a scrapper 504 estate with 500000 miles on the clock. Great upgrade on the rover 2.25 diesel. Love your content and your humble every days a school day attitude.
We had a 504 sedan, preceded by a 404, back in Zimbabwe. The pickups were popular with farmers. Miss the simplicity of maintaining these vehicles and they could go almost anywhere. Those things are tough - Dad hit a warthog once at 60mph, only caused a small ding on the bumper and cracked glass headlight lens.
We bought a 504 in Harare in 1995 because the Nissan dealer only had 3 "bakkies" and we needed 4. The 504 turned out to be the favourite ahead of the Mazdas the Nissans , Mazdas.
Reverse usually doesnt want to engage untill you let go of the clutch a little bit while keeping pressure on the shifter and it usually slides in as the gears move around , i know from my old citroen and now new peugeot does the same thing.. pretty normal but it shouldnt be too hard to get it in gear
Thanks for the video, as a fanatic of pujos and especially 504s you kept me hooked on and indeed earned my subscription, looking forward for other coming content. Gracias
Un des meilleurs moteurs peugeot. J'ai travaillé comme mécanicien chez peugeot et pour rien au monde je roulerai avec autre choses que mes 205. A cette époque c'était fait pour durer, aujourd'hui c'est du jetable. Merci pour cette chouette vidéo
What a luvely truck, considering it's been sat in a field it seems to be in pretty good condition? The different paint jobs might have saved some of the metal. Very jealous.
The 404 pick-up stayed in production after the 404 sedan was discontinued. Same happened with the 504. There was even a 4dr 505 pick-up on the South American market that Europe/UK never got. Interesting about this 504 is that it has beefed up 5 stud axels, and a live axel rear. It usually came with a canvas tent on the back. The engine was the famous Indenor diesel that was used in many Peugeot cars and vans like 403, 404, 504, 604, J5, J7 but also in Ford Granada, Sierra, Scorpio and Transit. They were also used as marine engines. Very reliable. And very popular in Africa!
these trucks were fairly common in the nineties but were sought after for export where they were dismantled and sent abroad but a good reliable truck back in the day,
Brilliant find, they were a bit more common in the uk than you think particularily in the 1980’s/ 90’s and even early 2000’s, but your right about trucks generally they tended be Toyota Hilux’s and Mazda B2500’s etc. A few Farmers around where I grew up had those Peugeot 504 pickups.
Remember the cabin smell of 504, very distinct. My father imported the first 505s into Tanzania/Zambia. We used to drive thousands of kilometres, hauling full loads, full passengers, full speed. The things were solid.
Great find. I have totally enjoyed your video. I really love Peugeots. Av never owned one but from the info that av gathered around and peoples experience it is a very special car. Never seen a diesel one only petrol in Kenya. The sound of the lion is everything. You are easy and i just love the way you did everything. Respect from Kenya. I will definitely follow you for more
I had a 405 pick up 25 years ago ... same colour but insurance companies said they could not find it on list i think it was chop car front with pick up back on ..been done right so still insured it had on good few job.😊 ent me good bit money back in day din.t have any rust on it😊ps ..love joy on TV had one😊
Dad had a 504 estate in 1970. Driving back up through France on the autoroute at 3am he pulls over on the hard shoulder and gets out, opens my door (sitting behind him) says ‘I’m tired out you drive’. So I did. All the way to Calais. 15 years old. Rest of the family snoring!
Just find your channel. The first video i found was when you had bought the mini Cooper, and i can say that this is one of the best channel out there. Greetings from Sweden 🇸🇪☕☀️
Great to see an old 504. The saloon version was my first car after I passed my test in 1986 - a W reg (1980) 1.8GR petrol in ‘Sahara Beige’ passed down to me by my father when he retired. It was a fantastically comfortable car but at only 6yrs old and having done only 54k miles it was rotten as a pear in the front wings and sills just like yours. Non-assisted steering needed arms like a gorilla to turn the wheel at standstill but the power brakes were awesome
Had one of these at the Peugeot dealer I used to work at (think it was 15-20 years old at the time). Cracking thing. Used to borrow it a bit. Think reverse is push down, push left, push right. Fuel wise the XU runs on anything, doesn’t even need to be diesel. Cooking oil will do. If you are interested in getting the injectors and pump redone there is a good place in Droitwich you can post them off too.
Just discovered the channel Nino and love the videos👏. Inspiring me to get adventurous and tackle a few jobs on my 2001 Boxster which I picked up in May this year👍
Had a few of these pickups as a work truck. It was nice to drive but not big enough, the boss eventually saw the light and got me /us a transit tipper. Good move i thought, didn’t have to worry about the weighbridge anymore.😊.
Great watch, enjoyed that, used to sell those old trucks when I worked at a Peugeot dealership in Sussex in late 80s, great old rigs. Thanks. Subscribed
Aah!! The Peugeot 504 pick up!! That was a great utilitarian vehicle back in the 80s and 90s here in Argentina. Unfortunately, you don't see them often nowadays.
This brings back memories, my late father had one of these in a bright orange colour, early 90s i think , it was a tank compared to my talbot horizon (first car lol) im sure it used to do donuts 😂😂 , all the best in your new unit 👍
Old Diesels never die, they sit and wait for the day to run again 😊
This should go on a t-shirt
Just imagine if it was an EV?
It would just be a degrading toxic mess
True that
@@NotEconomicallyViable Bullet proof engines for 504 diesels, if you maintain them properly are going well over past 1 million km..
Specially for harsh & remoted places from countries like Colombia, Argentina, Africa, Algeria, Morocco, Libya, Sudan, Niger know them very well
@@poplaurentiu4148aqui para o Brasil tambem vieram mas infelizmente a maioria virou sucata, tenho uma a 4 anos q já resgatei do lixo, não está perfeita mas aos poucos ficará ótima
The good thing about 504s and the old 404 pickups was that they were built on strong chassis’s so you can take the body off and weld or replace panels very easily -- that is why so many counties in Africa still have them on the roads -- you got a real gem there . Some where in France you will be able to get replacement panels or even Kenya where they were produced up to about ten years ago .
You could, but at that point this car would have eaten almost ten times the money you would need to buy a good one. In this case, with the steering wheel on the drinker side I would just check if any of drinkercar parts can be used, if so buy a good solid car from France and convert it. The tailgate from this one could make some Peugot freak to let go of some of his money to get himself a nice wall hanger.
I worked on a 504 car back in high school, but gave up on it when the springs came up through the rusted front shock towers. I wasn't much of a welder then (and my welding is getting rusty again now, no pun intended.)
Peugeot still make parts for all their cars models since 1920, it's expensive but we are so proud of our cars that passionate people in Sochaux can restore any Peugeot/Citroën !
Some 504 are still on the road today, like new !
@@Igzbl78 Agreed, PSA (now Stellantis) seem to inspire a proud loyalty in those who own them. Probably because they're damn loyal cars drivetrain-wise & folk have used/abused them long enough that they endear themselves to their owners. (Can't speak for Euro-3 upwards mind, but then what modern cars *are* reliable in the way they once were?)
We're still running round in our Xantia 19D-auto (my forever car) & currently have a ZX 19TD being reassembled for summer giggles. I understand this truck was pretty far gone from the video so far, but it does make me sad to see it no longer shows on the DVLA database. It's one I would've got my welder out for (and I don't even like welding much!) and at least given it another chance. Would love to own a 504/505 one day
Correct, we still have them on the road in 2024,
I have the same one, 1990 model, it takes me every day to my workshop. It is an indestructible war tank, excellent job bringing it back to life, Greetings from Argentina
Those peugeot engines were bullet proof cant say much for the rest of the car good luck with it
Indeed. Peugeot and Citroen were made out the shits of rust from the factory.
@@srfrg9707 b
The 504 (and the 404 and 403 before it) was a stunningly tough vehicle. The 505 was the last of the line and there's never really been a car to match since.
We've still got a few of these running around here in Brazil. Highly sought after because this diesel engine just keeps on going...
@@mikescudder4621 Half a million miles from one of these was not uncommon. Pug engineering was superb and steel-bumpered Pugs were the best. The great shame was that the bodies were so rust prone in the sixties and seventies.
@@mikescudder4621same in Argentina, you can see some from time to time, the car version was even more appreciated and there's still people that use them on the racetrack even.
I have 404 wagon(s) here in Oz. IMHO the best car ever made. I'd kill for this late 504 diesel ute. Well well worth repairing. Leaves the Japanese utes of the era and beyond, for dead. BTW lots of valuable and hard to get bits on this 504 ute.
@@lordofrims Cool!
that never dies! old engines with no sensors or electronics.
Very tough little engine
Run it on old cooking oil. It will !!!
No doubt about that!
How q
I hate modern cars full of major problems computer this computer that no bloody good if you breakdown in the middle of nowhere .Retired old school mechanical engineer .👊
Welcome back buddy!!!! That's a damn fine specimen you've found!
Thanks bud 👍
Visiting France for vacation a few years ago I saw the predecessor of the 504, a beautiful restored 403 pick-up truck, still working as a daily driver on a farm and in the wine yards! 😍
I see a 404 pickup with a wodden bed almost every day and I bet the driver is the original owner because I've seen him driving it for over 40 years now. 🙂
That’s very cool
Grapes MUST be transported by a Peugeot to get the right taste.
Port must be transported in wooden barrels by sea and baguettes taste best out of the back of a beaten Renault 4 Van.
I saw lots of these amazing vehicles in Tanzania and Kenya in the late 1980’s, they were incredibly rugged and managed the challenging terrain. Great video, love the old Peugout
These vehicles are considered legends here in kenya. Owning one (the saloon and station wagon) in the 70s and early 80s was a status symbol. The speed was legendary
In north Africa too
Really hope you have the stamina to see this through! A marvelous and timeless design - and the backbone of African mobility!
Thanks for your generosity once again! I’ll do my best shot to bring the old girl properly back to life!
I had a 504 at work, you can change gear when rolling without the clutch, up and down the box and they will cruse at 105mph all day long on motorway. There's a torque tube on the rear axle. Basically a great truck to have.
Takes me back. My Dad had an early 80's 7 seat 504 estate in red. It could take the whole family anywhere in comfort and at surprising speed. Good memories as a newly licensed teenager of taking to an indicated 100mph. He ended up selling it 25+ years ago for £500 and I think it was exported to Africa. It's probably still doing a job there!
That's cool. I wonder what it'd be like taking this truck to 100mph haha
Likewise for us... Mom, dad, granny and 3 kids tour Europe in a 504 family estate and caravan.
same, dad had a 505 with 750k kilometers, he sold it for 1900, it was in mint condition and now i am 100% it is still running somewhere in africa
They have lots of them still going strong in Egypt!
Awesome. I drove a 504 GLD car for quite a few years with the same XD2 motor. The 504 is so robust as you've found out it's the body work that will always suffer in our climate. 504 was made until year 2000, not bad for a car released in 1968. The XD2 is an Indenor engine, and a 6 cylinder version was also produced by Volvo Penta for marine applications. The 504 saloon held together despite the bodies because the engine/gearbox had a solid torque tube bolted from the gearbox to the rear diff/axle, so you could lift the body off the engine/transmission assembly of all 4 wheels, even the Peugeot factory manual showed this procedure! 504 pickups command a fair few shillings these days, don't scrap it, many bits n pieces are still available as they were used in cars like the 205. I'd rather like an early 505GLD 2.3 if only I had space and spare cash, for now it's my 205 waving the Peugeot flag. Good luck!
My Brother had a 1978 504 2ltr petrol for years here in Ireland....built like a Tank...great car for towing trailers ! 👍
Been there, done that with the drain plug when adding fresh oil!
😂 The Aussie role play bit was pretty entertaining. I love seeing all of the interesting messes that you manage to get into with these old vehicles. Keep up the great work mate!
Hi, I was working as a mechanic at a Peugeot main dealer back in 1989, I love the 504 pickup, its a great vehicle. If you decide to scrap it because of the extensive rot I would be interested in the engine, I put one in a series 2a land rover many years ago, big improvement on the rover diesel. The down fall of the 504 was rust just like the citroen c15 both good vehicles but rust buckets.
The old duffer.
It's a very cool truck. If I could do something about the bodywork it'd be great to have the truck stay around
Hi, none of the body panels are available, even pattern one's now, so you're have to make them, which is no easy task. We manufacture the Land Rover rear tub panels, and I wouldn't want to make just one set of panels for this. The development work alone is hundreds of hours of work. It's a real shame that it's so far gone.
@@NotEconomicallyViableThere were lots of original body parts in Kenya upto a decade ago or so. Occasionally but very rarely they do crop up for sale as cheap old stock. disposal
I have sooooo missed your video's. The humour and your "everyday is a school day" attitude has to make this one of my favourite channels. The "will it start" videos are along the line of the 6DDiesels (professional mechanic) content, but are at the opposite end of the spectrum for competence which you yourself admit making the format a winner.
Really appreciate that, Keith
"everyday is a school day"----
That phrase was born to be printed on a T-shirt!!!
@@RI-ns8wz to some of us, 'every day is a school day' sounds like hell
I had a 1975 504 Peugeot diesel car that I put over 200,000 miles on so I have had a lot of experience with this model. One of the problems was the engine was a wet cylinder engine and every 100,000 miles I had to have the engine repaired as the wet cylinders leaked water into the oil and I had to have it repaired. This was the main weakness of the model, except for the rust!
So it was a xd90 engine (first 504) but the xd2 engine hasn't this problem.
Good man, i recently picked up an '86 505 GRD estate that somehow avoided being exported to Africa to end up as bush taxi, you cannot beat the XD engine!
Tough old girl that engine
Like others I have missed your videos. I have had two 504 pick ups and done something like 400.000 miles between them towing heavy trailers and they lived on. I have used 504's in South Africa. Either the 2.0 or 2.3 are bomb proof, especially if non turbo. I had to stop myself running upstairs and messaging you when I saw the video. The sills on the trucks are not structural as there is a ladder chassis. If the buck is shot you could take it off and replace with a home made bed or even a tipper. In bleeding the brakes, it might be easier with the engine running as they are pump driven from the top belt. Indian Tata trucks had the same set up using peugeot diesels. The 5 speeds suffered from worn fifth gears but yours is 4 speed. The earlier oil bath air filters are the reason there are still thousands of 40 year old 504's in Africa. Thank you for posting, I would consider it myself!
That's pretty cool, Paul. Thanks for the advice 👍
Used to work on them when they were popular , never saw one with a seat that good !
I've also been guilty of leaving the sump plug out and plenty of others will have done it. You're definitely not alone!
Well that's good to know lol
Flipping heck, that's amazing. I suppose this is what happens when you don't have all them electronics. Your partner is an understanding woman 😅.
That I am 😂
Yeah she's great
You're more Hubnut than Hubnut himself and had me in stitches 🤣 as if you're Laurel and Hardy all rolled into one 😅. These pickups were available in Zimbabwe back in the days of Rhodesia but we never got them in South Africa. Somebody brought one to South Africa and I saw 👀 it with its Rhodesian registration plates.
I passed my driving test at the fist attempt in a 404 pickup, column gear change and handbrake up under the dash. The examiner had never seen one before. My father then purchased a 404 estate brand new in 1970, in the late 70s we moved on to a 504 1.9 diesel estate and also a diesel 504 2.3 saloon. The 504s were really good, but the 404s were even better, I sure wish I still owned both of those.
I drove 404 pickup when I was 12, loaded with hay, or at times firewood; those gears,running from bottom to up,😮😅, it was quite awesome,,,, unlike other half gears, from top to bottom,,,,,😀 like Toyotas, Nissan,,,,,
I almost died on a 404 which rolled and threw me out of the window ,
Hi,I've just found and subscribed to your channel, I'm loving the Peugeot pick up,well worth doing, fabricate inner and outer sills,floor repairs,when did you last see one, every french campsite seems to have one, for on site use,bins etc in various states of bodgery.
I once owned a Peugeot 505 Turbodiesel....loved it! They are tough old diesel engines. Until seeing this video, I had no idea Peugeot made a truck version of the 405. I'd love to have one.
They made 404 too, verry celeb in north Africa
What a car! Those old diesels will outlast us humans.
fanatstic find,i used to work for Peugeot/Talbot back in the middle 80's & we had a 504 pickup as a workshop truck it went through hell & never let us down fanatstic pickup,i remember when they stopped making the 505 & owners esp the 505 Estate wrote letters to Peugeot begging them to carry on making them they were & still are a sort after motor,but great to see you got your 504 running again
The 504 pick up and 7 seat estate were well thought of in their day.
By who?
@@angry9901by those who owned/drove them. I've rebuilt these engines in a former life
@@Interdimensional27 you poor thing, I am sorry.
The 504 is surprisingly the car I've always wanted more than anything
You can re-connect to the original fuel tank now that its running. Check for a separate oil reservoir on the mechanical FI pump. A lawn and leaf blower would be my first choice to remove detritus from under the bonnet and interior spaces. Great job. Narragansett Bay.
Thanks for the info
This guy could do this full time and be successful. Who else agrees?
Thanks for the kind words
diesel machines don't disappoint, well-done engineer
Thank you for the video sir. Before start working/ diagnosing, It was great power washing or blow dirt's from the engine bay .That helps to visualize defective parts easily, like wire cut, leaks etc.. .
I really enjoyed your video to the fullest. What separates you from other is the fact you are who you are and no pretending. 👍
Glad you and the Mrs are having fun with this. Great to see. You are picking some challenging stuff these days.
Cheers, Mitch
These old Indenor Diesels have brought 2 generations of my family home, loyal humble with that particular Indenor Diesel rattle. My dad had a 404 in the sixties that did an incredible 300000 kilometers and I got a 504 Station wagon as a company car visiting ships all over Europe as a service engineer, these cars are real epic and come from an era when Peugeot made super reliable no nonsense cars. My 504 L Estate had the same dashboard.
That's pretty cool
Those old Indenor lumps are pretty bomb-proof. The 504 is an absolute legend, but as you've found out, they are total rust traps. I had a 504D Familiale 7-seater. It was probably the best car I ever had.
We had one also. Just fantastic but rusty.
In Europe parts are more available than here in South Africa. In Cape town there is a place where they rebuild rear classic cars and engines. My bakkies as we call them here (L.D.V.s ) I fixed them my self . To replace rusted metal plates with new ones is very time consuming. Good luck and don't sckrap its parts.
My dear dad ran a 1974 504 GL for over 20 years. He sold it to a neighbour with over 418k on the original engine and gearbox. GES 314N.
This is so cool! 😎
My old man had a removable Truckman fibreglass shell for the bed, and I remember he left it off in the garden with the window hatch open, I climbed in it, the glass hatch closed behind me and I was trapped inside it for about half an hour, felt like hours as a 6 year old 😂
I only got out because the neighbours heard me crying my eyes out trapped inside 😂 It was well hot 🥵
He said, the 504 was the best truck he ever had, proper solid workhorse 💪
It was a pale blue and is the first car I have memories of😊
Good luck getting her back on the road dude 🤘
My late farther had several of these great trucks just to let you know the cylinder heads crack between the swirl chambers and blow loads of greay smoke when the engine is hot on ildle very common. We had problems 25 years ago getting parts we ended getting several cylinder heads off the 2.3 liter diesel ford Sierra and had them rebuilt and kept in stock lol. If you want really rare Peugeot 504 pick up hunt for a 4wd one we had one it was brilliant it was the last vehicle I sold 8 yrs after my farther passed great memories great times wish I could go back lol.
I love watching old cars come to loyfe so I just had to subscwibe!
incredible engine and find ! great work mate.
Thanks mate
Never seen someone on TH-cam actually pick one of these things up well done dude. 👍
One of the best van’s I’ve ever had
Had a 604 in the 1980's and pretty much rusted away...a fond memory of wonderful car.
Can't go wrong with an old N/A diesel. Purely mechanical.
Yeah lovely stuff
The sound of that little diesel engine, it just makes my day i'm still smiling 😄😄
It's a great sound
Magic these trucks never die .looking forward to the fun
I usually change the oil of my oil bath filter after I changed the engine oil. I put the old engine oil in there. No need for wasting new oil for the air filter if you ask me.
I can't believe how good that thing ran after sitting for so long
It ran so nicely. Very tough engine.
Love seeing old motors com back to life 😮🥰
I always wanted a 504 estate.
That Peugeot has more holes than a golf course but it's not surprising it runs 😅 you Sir are a purveyor of tat at the moment but we wouldn't expect any less 😂 bonus points for getting the other half on board too!
Purveyor of tat 😂 You are not wrong…we need that on the wall!!
I never knew these existed, it's actually quite a good looking truck and those old French diesels in my experience will just run forever. It's also in that era that you can run them on cooking oil
So, so reliable & well designed, the 504 diesel. The best motorcar they ever produced. I had one for a while when I lived in France
This truck is complete - a complete load of... potential lets say. 😃😃 Al from 6D Diesels would be proud of you 😎😎 Love the new homestead. Pleanty of room for all your potentials😂😂
Hahaha
Haha that brings back memories, we had our work experience at school, I was at a Peugeot garage and they had a 504 as the runabout, parts hauler, break down etc. it was brand new.
Well done, good job
Thank you
I remember my dad buying one. There was big hype around them in Zambia. Ever farmer had to have one!
The other lingering memory was him having to strip the engine at our cottage on the shores of lake Malawi. He laid down some jute sacks and laid the engine Components on it!.
It seized on my brother who was driving it down from the FARM. ( SECOND TIME.. THE FIRST COMING BACK FROM LUSAKA.. CAPITAL OF ZAMBIA)
He was the most able mechanic I know.
He was able to put it all together, get it started and have it driven back with a full load back home!
Them old Peugeots never die, great vehicles, would love to find one.
old engines with no sensors or electronics👍
Still quite few running in Europe like France, Spain, Portugal and lot of them in 1000s all over Africa on daily use. The only problem is rust but you still can get all the parts and panels for it, plenty in scrap yards in France and neighbouring countries. Good workhorses they are.
Even Citroëns 2cv made the pickup trucks.
Very handy around farming communities and builders...ports also use them and lot of different businesses too...
No surprise at all when she fired up they are bomb proof and go on forever. I transplanted one of those into a series landrover in 2003 donated from a scrapper 504 estate with 500000 miles on the clock. Great upgrade on the rover 2.25 diesel.
Love your content and your humble every days a school day attitude.
I learnt how to drive with this one...I remember I couldn't shift to third so I always just drove on second...and it allowed me...love it forever.
We had a 504 sedan, preceded by a 404, back in Zimbabwe. The pickups were popular with farmers. Miss the simplicity of maintaining these vehicles and they could go almost anywhere. Those things are tough - Dad hit a warthog once at 60mph, only caused a small ding on the bumper and cracked glass headlight lens.
We bought a 504 in Harare in 1995 because the Nissan dealer only had 3 "bakkies" and we needed 4.
The 504 turned out to be the favourite ahead of the Mazdas the Nissans , Mazdas.
Reverse usually doesnt want to engage untill you let go of the clutch a little bit while keeping pressure on the shifter and it usually slides in as the gears move around , i know from my old citroen and now new peugeot does the same thing.. pretty normal but it shouldnt be too hard to get it in gear
Thanks for the video, as a fanatic of pujos and especially 504s you kept me hooked on and indeed earned my subscription, looking forward for other coming content. Gracias
Great truck. I miss mine. Absolutely bulletproof.
Un des meilleurs moteurs peugeot. J'ai travaillé comme mécanicien chez peugeot et pour rien au monde je roulerai avec autre choses que mes 205. A cette époque c'était fait pour durer, aujourd'hui c'est du jetable. Merci pour cette chouette vidéo
Looks like it will sail through it’s MOT. 😂 Looking forward to this and all the future episodes of welding.
Advisory for light corrosion...
What a luvely truck, considering it's been sat in a field it seems to be in pretty good condition? The different paint jobs might have saved some of the metal. Very jealous.
Good find. I'd of found it hard not to buy also. Excellent vehicles in their day. Welding coming next, with that and the P6!
I really must start learning to weld!
The 404 pick-up stayed in production after the 404 sedan was discontinued. Same happened with the 504.
There was even a 4dr 505 pick-up on the South American market that Europe/UK never got.
Interesting about this 504 is that it has beefed up 5 stud axels, and a live axel rear. It usually came with a canvas tent on the back.
The engine was the famous Indenor diesel that was used in many Peugeot cars and vans like 403, 404, 504, 604, J5, J7 but also in Ford Granada, Sierra, Scorpio and Transit. They were also used as marine engines. Very reliable. And very popular in Africa!
I love how the cat jumping off the roof caused about a kilo of rust to fall off. 🐈⬛ Love this truck. Great video.
these trucks were fairly common in the nineties but were sought after for export where they were dismantled and sent abroad but a good reliable truck back in the day,
You need to finish the two projects you've got before you end up with a breakers yard outside your house lol
You’re not wrong there 😂🙄
I'm not gonna lie - breakers yard at my house sounds dreamy lol
Brilliant find, they were a bit more common in the uk than you think particularily in the 1980’s/ 90’s and even early 2000’s, but your right about trucks generally they tended be Toyota Hilux’s and Mazda B2500’s etc.
A few Farmers around where I grew up had those Peugeot 504 pickups.
Remember the cabin smell of 504, very distinct. My father imported the first 505s into Tanzania/Zambia. We used to drive thousands of kilometres, hauling full loads, full passengers, full speed. The things were solid.
Great find. I have totally enjoyed your video. I really love Peugeots. Av never owned one but from the info that av gathered around and peoples experience it is a very special car. Never seen a diesel one only petrol in Kenya. The sound of the lion is everything. You are easy and i just love the way you did everything. Respect from Kenya. I will definitely follow you for more
A pickup! Cool stuff. Looking forward to the episode🍵
That cat has the right attitude! :)
Way back in 1980 I owed a Simca 1100 which needed the "hammer treatment" in winter.
I had 3 new 504 pickups for work but they stopped making them,they never replaced them with anything.very popular with builders.I loved them.
Thanks
Thank you so much 🙏🏻
I had a 405 pick up 25 years ago ... same colour but insurance companies said they could not find it on list i think it was chop car front with pick up back on ..been done right so still insured it had on good few job.😊 ent me good bit money back in day din.t have any rust on it😊ps ..love joy on TV had one😊
I enjoyed this episode, I respect your positivity even when things are tricky
Dad had a 504 estate in 1970. Driving back up through France on the autoroute at 3am he pulls over on the hard shoulder and gets out, opens my door (sitting behind him) says ‘I’m tired out you drive’. So I did. All the way to Calais. 15 years old. Rest of the family snoring!
Haha brilliant
Just find your channel. The first video i found was when you had bought the mini Cooper, and i can say that this is one of the best channel out there. Greetings from Sweden 🇸🇪☕☀️
Thank you so much 👍
Great to see an old 504.
The saloon version was my first car after I passed my test in 1986 - a W reg (1980) 1.8GR petrol in ‘Sahara Beige’ passed down to me by my father when he retired. It was a fantastically comfortable car but at only 6yrs old and having done only 54k miles it was rotten as a pear in the front wings and sills just like yours. Non-assisted steering needed arms like a gorilla to turn the wheel at standstill but the power brakes were awesome
Very satisfying watching the 504 come back to life. New subbie! Cheers from Nairobi!
Glad to have you around 👍🏻
You are my favourite Bri'ish person :D Keep up with the good content!
High praise indeed 😀😀
Had one of these at the Peugeot dealer I used to work at (think it was 15-20 years old at the time). Cracking thing.
Used to borrow it a bit. Think reverse is push down, push left, push right.
Fuel wise the XU runs on anything, doesn’t even need to be diesel. Cooking oil will do.
If you are interested in getting the injectors and pump redone there is a good place in Droitwich you can post them off too.
Thanks for the advice. I'll try getting her into reverse again. If still no joy then maybe that's why she was parked up 🤷
Just discovered the channel Nino and love the videos👏. Inspiring me to get adventurous and tackle a few jobs on my 2001 Boxster which I picked up in May this year👍
i learned to drive on a 504 wagon. thanks for reminding me of the sound of it.
Check if the diesel pump is not leaking diesel into the engine oil I am restoring a Daf 400 ldv 400 with same engine xd3T
Maiden Voyage.
Your narration is furst class.
Following you from Kenya.
Danke!
Thank you so much. That's incredibly generous of you!
Had a few of these pickups as a work truck. It was nice to drive but not big enough, the boss eventually saw the light and got me /us a transit tipper. Good move i thought, didn’t have to worry about the weighbridge anymore.😊.
The look on your face when it started..... Priceless!!!!
Great watch, enjoyed that, used to sell those old trucks when I worked at a Peugeot dealership in Sussex in late 80s, great old rigs. Thanks. Subscribed
That's very cool. Thanks for the sub 👍🏻
Aah!! The Peugeot 504 pick up!! That was a great utilitarian vehicle back in the 80s and 90s here in Argentina. Unfortunately, you don't see them often nowadays.
This brings back memories, my late father had one of these in a bright orange colour, early 90s i think , it was a tank compared to my talbot horizon (first car lol) im sure it used to do donuts 😂😂 , all the best in your new unit 👍