perfect video, just what I wanted to see ! thank you. I have a big sheet of laminate, glue, and plywood cut to side to replace a MDF table top that is old and got wet and swelled over it's 57 years since it was made !
Silence lecturer, easy to understand, 'digest' and practice for DIY. Keep up the good and noble work. Please make more video on kitchen cabinets such as base, wall, tall and island unit as well as on drawers. Good job
Nice! I'm just wondering... If I wanted to laminate a bevelled edge piece like on the high gloss kitchen cabinate doors, would I still use this technique and fold it around or would I need a heat gun or is it completely different entirely?
Great video. One of the first things I was shown how to do in a workshop. How much extra thickness on top of the thickness of the laminate do you expect? Or does the contact adhesive stick it tight to the ply?
Depends on the thing you do,if it's the door,do the front first and then laminate the edges,if it's table top,you laminate the edges first and then the top
Depende po. May mas mura na ready made pero hindi ganun ka ok ang quality ng materials na ginamit. Pag diy naman alam mo po yung quality pero pag mali ang pagkakagawa ay nasasayang ang materials.
nakita ko pano gawin yung akin, parang meron tlga sya naka design na for edges naman.... naka rolyo sya tapos ididikit lang din tulad nung pandikit nya.
High Pressure Laminate po ang tawag sa material. Kasize po ng isang plywood. Pwede irolyo kaso kapag nasobrahan sa rolyo nabibiyak kaya alalay lang po. Around 400+ pesos ang white. Double price naman kapag may kulay or design.
Sa opinion ko po mas ok pa rin pag machine ang naglaminate dahil equally distributed ang pressure during lamination process compared sa manual. Pero for DIY purposes or small scale projects ok na rin ang manual as long as we follow the proper procedure of lamination.
Pwede naman po pero not recommended. Pero kung need po talaga ilaminate ang plywood na may paint na siguraduhin lang po na hindi loose ang paint at dapat rough surface kaya need muna iliha.
@@reeblaagan7310 M3700M po gamit ko sa video. Yan pa lang po nagamit ko na trimmer/router so wala akong ibang comparison. Pero so far maganda naman performance para sa akin since DIY lang naman ginagawa ko. Good quality and reasonable price. Pero we will see later on baka magtry ako ng ibang brand.
Wonderful but sorry, the video should have inclusion of edge banding tape. Why ? Accurate finish of laminate edge is a technique, however that may be a waste of time if the edge band which is the integral part of finishing is not attended simultaneously.
Folks... this was one of those videos you want to forget the minute you see it, Virtually every step in the process was incorrect. I'm a cabinet pro with 50 years in the trades, The person who posted this was probably well intentioned but sadly not qualified. Check out next level carpentry or other pros before you try this at home.
Best example I have seen of how to use the wooden spacers or dowels to introduce the laminate in a controlled way from the center. 10/10 well done!
It takes a certain kind of madness to do this job correctly. Nicely done.
perfect video, just what I wanted to see ! thank you. I have a big sheet of laminate, glue, and plywood cut to side to replace a MDF table top that is old and got wet and swelled over it's 57 years since it was made !
Silence lecturer, easy to understand, 'digest' and practice for DIY. Keep up the good and noble work. Please make more video on kitchen cabinets such as base, wall, tall and island unit as well as on drawers. Good job
Awesome! thank u bro for teaching me something new today...."a big love all the way from INDIA"
Thanks for this tutorial. I am planning to make a minimalist multifunctional cabinet for my bedroom..
Really appreciate the consideration for not having power tools
Great..tqvm for the superb video explanation..u safe the day..keep it up for more informative clip..
Pinoy! I’m half Filipino homie
Awesome video. What brand contact adhesive are you using and what type of file you use at the end to sand the edges? Thanks.
I've always used Semen brand... it's the stickiest.
@@frasertones8519 semen brand?
Wtf man
finally! been looking for diy tutorial for this laminated wood. need nmen macover ung diy nmen na tv rack. thank you!!
Ano tawag don sir laminated sticker ba tawag jan?
Thanks for the great tutorial!
Hey the glue that you use do we need to add something into it?
No need. Use as it is. Hope it helps.
Hi what brand of contact ur using thnks
Do we need to sand the plywood surface before applying contact cement? Tnx
Not really. But it should be free from loose objects, oil, and dust.
Thanks for the knowledge sharing
wow good video tips.
This is a really good video.
Tips naman po pano gawin yung pag laminate sa ceiling.
Can other glue like Stikwell be used also?
good work
Hi bos. Mana boleh sy beli laminate tu ye..seronok pulal tengok dan tearsa nak try buat.
sir baka pwede parecommend ng murang bilihan ng laminate or and vynil pang cabinet din. thanks. and More videos po sana.
Sorry di ko rin po alam sir saan bilihan ng mga murang laminate.haha dito lang ako nabili sa wilcon o cw home depot na malapit sa amin.
Nice!
I'm just wondering... If I wanted to laminate a bevelled edge piece like on the high gloss kitchen cabinate doors, would I still use this technique and fold it around or would I need a heat gun or is it completely different entirely?
No you would need a thinner film and a vacuum press. Which you can make your self under 50$
using spray paint method is better than laminate in beveled edges.
New subscriber tol .. thanks sa idea..
Can i re-use the paint roller for next panel?
Good day po, pwd ho ba laminated para dun sa ipang walling na plywood? Thanks
Great video. One of the first things I was shown how to do in a workshop. How much extra thickness on top of the thickness of the laminate do you expect? Or does the contact adhesive stick it tight to the ply?
can we spray paint over the laminated plywood ?
Hi! Yes, but you need proper surface preparation before painting over it or else the paint will just peel off.
@@AnvinArganosa Thanks for the reply buddy !
Nice. Anung mga brand pp ang maganda laminate?
If nagtitpid po pwede Unica. If may budget Formica po.
If you wanted to laminate the edges also which would you do first?
Depends on the thing you do,if it's the door,do the front first and then laminate the edges,if it's table top,you laminate the edges first and then the top
Thank you
Mahusay.. naging pala isipan sakin tlga yan pano ilalapat.😊 Tnx
Thank you!
Super demo
good
Nice video sir, pero ok din po ang gumamit ng adhesive sticker s plywood?
Hindi ko pa po natry. Pero based sa feedback ng iba hindi po durable ang adhesive sticker compared sa HPL. Pero advantage naman is easy installation.
Galing sir a..nag sama Tayo sa Aquagenie..
Thank you! Kmusta? 😀
@@AnvinArganosa ok Lang sir, bakasyon ako ngayon sir..ingat, congrats sir ngayon ko Lang nakita mga blogs mo..
@@foodislife6745 ingat rin. enjoy sa bakasyon.
Question. Saan po mas makakamura sa ready made na o sa diy?tnxtnx
Depende po. May mas mura na ready made pero hindi ganun ka ok ang quality ng materials na ginamit. Pag diy naman alam mo po yung quality pero pag mali ang pagkakagawa ay nasasayang ang materials.
Any idea how to wrap an edges?
nakita ko pano gawin yung akin, parang meron tlga sya naka design na for edges naman....
naka rolyo sya tapos ididikit lang din tulad nung pandikit nya.
Boss ano po panlinis dun sa scraper at roller? Nanuyu kac ung akin, baguhan lang kac ako 😅
Saan po maganda bumilo ng murang laminate?
Anong cause yong nalaminate pagkatapos lomobo parang may hangin at hindi dumikit sa brand ba ng rugby o mali ang pagpahid...thanks po
there are special tools to trim the edges perfectly.
u mean Router
Ano po tawag dyan yung pad na kinat mo?
Thanks buddy helpful 👍
You're welcome. Thanks for watching!
boss matanong kloplang po ano po tawag dyan sa parang sticker na makapal na dinidikit ?? at mga sa magkano po kayayan
HPL o high pressure laminate po. Around 400 pesos ang white. Double price ang ibang kulay or may design.
Thank you very helpful
Gud am bossing..newbie here.. pede po ba m screw ung kttpos lng n laminate? D po ba massire ung laminate..thanks po.. thanks po s video
Paano po na bibili ung vinyl naka rolyo po ba o naka flat na parang plywood? And nasa magkano po? Salamat po sana masagot
High Pressure Laminate po ang tawag sa material. Kasize po ng isang plywood. Pwede irolyo kaso kapag nasobrahan sa rolyo nabibiyak kaya alalay lang po. Around 400+ pesos ang white. Double price naman kapag may kulay or design.
san po nakakabili ng pang laminate na sheet.. ano po tamang tawag jan sa sheet ma yan
High Pressure Laminate po. Sa wilcon or mga home depots meron.
Hnd po b madaling matuklap pag handmade ang paglaminate s plywood.or mas ok gsmitin ung machine mismo ang naglaminate
Sa opinion ko po mas ok pa rin pag machine ang naglaminate dahil equally distributed ang pressure during lamination process compared sa manual. Pero for DIY purposes or small scale projects ok na rin ang manual as long as we follow the proper procedure of lamination.
Pano po ba gumawa ng whiteboard using formica
Meron po special type ng laminate ang Formica brand for whiteboard purposes. Hindi ko pa po yun natry.
Legend!
Where i can by the laminate
San mo nabili yung hpl boss? Naghahanap din kasi ako
Sa wilcon po.
what blade?
Ano pong ginamit nyong pang lamininate
HPL po or High Pressure Laminate. Brand name Unica.
pwede din po kaya gamitin ung roller pang dough kung walang jroller?
Pwede rin po siguro. Pero mas ok kung malambot yung lalapat sa laminate or else baka magasgas o masira.
@@AnvinArganosa salamat sa reply idol meron kase dito nakakalat lang. Babalutan ko nalang ng intirior.
Anu po tawag dun sa pang laminate na ilalagay sa plywood?
where do you usually buy HPL?
Hi! Usually from home depots.
Salamat Kabaro sa tutorial, saan kaya pwede makabili ng laminate online?
Welcome kabaro. Di ko lang alam saan meron online. Sa wilcon o kaya sa CW home depot lang ako bumibili ng laminate.
salamat boss amo master pinuno simple lang pero rock!
Pwed buh e laminate yong flywood na may pintura na?
Pwede naman po pero not recommended. Pero kung need po talaga ilaminate ang plywood na may paint na siguraduhin lang po na hindi loose ang paint at dapat rough surface kaya need muna iliha.
Sir ano ang brand ng plywood na gawin nyo at san kayo nakakakuha?
Agusan brand ginamit ko po. Sa local hardware lang na malapit sa bahay.
Where can i buy hpl
Any home depot (Wilcon, CW).
Sir saan po makakabili ng Hpl laminated sheet?
Sa mga home depots po katulad ng wilcon.
Ok po salamat
pano po ilaminate pag curve
ilalaminate din po ba yung gilid?
Opo. Check nyo po ito gamit pvc edge banding. th-cam.com/video/uNfFDZq0ZKw/w-d-xo.html
sir ano po size ng trim router bit nyo? at brand na din ng trimmer? thanks for the video..
Router bit sir bosch na 1/4" shank. Trimmer naman Makita MT M3700M.
facebook.com/105082790956274/photos/pcb.150237936440759/150237493107470/?type=3&theater
@@AnvinArganosa Fixed Base Trimmer 530W M3700M
SRP: P2,740
SALE CASH PRICE: P2,390
okie ba yan sir?
@@reeblaagan7310 M3700M po gamit ko sa video. Yan pa lang po nagamit ko na trimmer/router so wala akong ibang comparison. Pero so far maganda naman performance para sa akin since DIY lang naman ginagawa ko. Good quality and reasonable price. Pero we will see later on baka magtry ako ng ibang brand.
Boss nasa magkano presyo ng ganyang laminates
Nasa around PhP 400+ per piece po yung white (4 ft x 8 ft). Kapag may kulay or design naman double ang price.
Magkano po kaya ung ganyan lahat ganyan den po ung sukat
Hi! San po nakakabili ng hpl?
Sa mga home depots po like Wilcon at CW.
Pwede po ba mabili ito sa hardware?
Usually po walang HPL sa mga local hardware.
Hard to to find HPL in SA
magkano issng roll nyan lods
400+ yung white po. 800+ yung ibang kulay o may design. Unica brand.
Wonderful but sorry, the video should have inclusion of edge banding tape. Why ? Accurate finish of laminate edge is a technique, however that may be a waste of time if the edge band which is the integral part of finishing is not attended simultaneously.
Hi! Please check this other video ( th-cam.com/video/uNfFDZq0ZKw/w-d-xo.html ) about PVC edge band installation.
👍🙏
may i know that laminate
High Pressure Laminate (HPL). Brand is Unica.
Parang ang dami po ng contact cement
Opo medyo naparami nga. 😁 First time ko po mag laminate dyan. Hindi ko navideo yung sakto lang na contact cement. 😁
Good job pa rin sir hehe magpapantay pa rin ba pag napadami contact cement?
Pantay pa rin naman po. Basta evenly distributed lang ang contact cement at apply enough pressure pag inilagay na ang HPL.
San nakakabili HPL boss
Sa mga home depot po.
nasa magkano po ba at size?
magkano ba isang laminate sir.
The video is excellent, but would be better if you talked
I will take note of that. Thanks for your feedback. 👍
Paano maglaminate ng edge nya?
Same procedure po pero PVC edge banding ang gamit. Eto po link ng vid. th-cam.com/video/uNfFDZq0ZKw/w-d-xo.html
Folks... this was one of those videos you want to forget the minute you see it, Virtually every step in the process was incorrect. I'm a cabinet pro with 50 years in the trades, The person who posted this was probably well intentioned but sadly not qualified. Check out next level carpentry or other pros before you try this at home.
Any particular criticism?
Just gonna blindly trust you honestly. Thanks
Do you have a video showing your method, or can you recommend one for me? I would like to learn more!
@@KarlaJBarton same
Any links to better demonstration?
magkano poh ang HPL ang isang peraso
Unica brand na HPL sir 449 pesos sa CW home depot. Yung white lang. Pero ang ibang kulay at may design mas mahal.
Anvin Argañosa ano po size nung 449 php na hpl?
4ft x 8ft po.
Mejo alangan ako dun sa contact cement sa laminate. Ulbok ulbok dahil sobra sa rugby.
Napasobra nga po siguro pero wala naman pong umbok umbok. Medyo magastos lang po sa rugby pero flat naman po yung nalaminate.
Hm hpl?
449 pesos per piece ang white na unica brand.
no narration
Why not you use the same method on glossy laminate 😂 see what will happen
What do you mean ? Why wouldn’t this work on gloss ?
to much glue
What are u doing....
😂😂😂😂😂
no explination hazzle.
too much glue
Edges look pretty bad.
Yes, without an edge banding it really looks bad. You can check this video on how to install a PVC edge band. th-cam.com/video/uNfFDZq0ZKw/w-d-xo.html
Thank you
Thank you