Nice Job.... I am in the process of converting an 8x16 v-nose cargo trailer into an RV and Mobile Sign Shop. I am just starting the walls and cabinets construction. I just sold a 15-passenger shuttle bus that I lived in for 3 years and traveled out west during the winters. I had to sell the shuttle bus because I purchased a large format color printer to make contour cut decals/stickers, koozies, t-shirts, magnetics, banners, mousepads, etc. The large format color printer would have taken up a lot of storage space so I needed to get something bigger. I did a complete conversion series on the shuttle bus from the ground up and now am doing a new series on the cargo trailer conversion. They are on my YT channel.
Great video Daniel thanks for sharing. Looks like the best toilet idea I have seen and will go with the same plan. Use something to protect your knees you will miss them when they are gone.
Thanks Daniel for the video, and time spent putting it together. Huge help. I bought a used 7x14 that already had a toilet and sink installed. The older I get the more I become my dad. (His theory is- “The things you know the least about are the first things to fail.”) All I knew before this video was there was a black and gray tank and a foot pedal to flush. Now with your video I have a better understanding how everything attaches, seal maintenance and what to look for when it leaks. Big help! Thanks!
Excellent job! Straight forward and to the point. I have a 14' x 7' cargo hauler and considering a conversion. This is definitely a go to video. Again, well done Daniel.
There are multiple reasons you run the vent pipe up the wall, and out the roof. 1. The gases escaping through the vent will stink like crazy. Especially in the heat. You won’t want the sewer gas (that’s what it is, of course] to be down, lower to you at nose level; 2. Up high, with the right vent cap design, even a slight breeze “sucks” the sewer gases out the vent better. Some actually act like a Venturi valve, increasing suction; some even rotate in the wind to optimize airflow.
It's definitely not the right set up for every camper, but so far no problems. Just copied the way Scamp has been building their campers for years. Thanks for the comment! Take care.
Super helpful video. I'm thinking of going this route rather then buying a holiday trailer since the toy haulers are just built better overall plus you get alot more options for loading and hauling, but the girlfriends one request is it needs a bathroom with a "flushy toilet" so this a step in the right direction for me 😂
Thank you for showing this!!! Very helpful. I love how the dogs look at it, realize it isn't ready for use yet and they go outside saying " man, I gotta poop outside again!" lol
Thanks for the info. You are doing exactly what I was thinking. Also live in Texas. Was going to try this before jumping in to a real toy haler to be sure I enjoy it.
I'm thinking you needed to trim the flange because you have hardly any gap between it and the grommet. In most instances, where the tank is installed several inches lower, there would be a pipe extending from the flange to the grommet, correct? So the opposite situation would occur.
Tap the blue circle with the B in it and watch the updated video of my conversion camper. I went the easy way ....5 gallon bucket and a 13 gallon trash bag with a nice wooden toilet seat. Most campsites have a bathroom and I decided not to spend a bunch of money or time on a toilet and besides I dont like messing with poop in a tank. But that was a nice job. Will be waiting to see the rest of the project.
Daniel, did you use a piece of 3” pipe between the grommet and the toilet flange or did the flange fit directly into the grommet? I know you did this quite awhile ago but I am just mounting my black and grey tanks and found your video.
I have the same trailer and black tank (both acquired after following your build). I'm considering putting it below deck in the next floor joist opening towards the rear. On the driver's side of the tongue. I confirmed fitment, just wondering if you gave any consideration to that location? Hopefully there's no evil surprise waiting for me. I figure this might allow me to center the toilet in the nose of the bathroom and with an elevated bath deck (could) probably just do 4") I can run the toilet drain with a nice pitch into the tank. Of course then it will have to be a roof vent...
pretty cool. So my question is, if you install a shower, which would require a P-trap also, would you have to build another little step up? Can you order these trailers in "tall" heights?
Tank working well still? Appreciate you posting this. If I understand the way you installed it is all the weight of the tank being supported by the lip going around the tank? No need for bottom support brackets?
Great video. I looked at the link for your holding tank. Was it really 9 inches deep? We’re you able to drop it so it fit the main beam? I’ve been looking at tanks with less then 6 in deep. Yours was 17 gal?
Beautiful & well done. But, the vibration due to the movement of the vehicle will cause your piping to wear out by friction because it is maintained by "metal straps" you would be better to fix them so that it does not rub.
Is it possible to install a few size bigger tires to give you a bit more ground clearance on these trailers? Most I've seen come with 15 inch tires . Or do you think this would be a waste of money and time?
Hello Daniel.. I am converting a shuttle bus and am interested in the technique you used to vent your black tank. Did you make a video for that install? And, how has that method worked for you regarding odor, etc.? Thanks again for your content.. you have been a tremendous help! -Cypress, Texas
hi. i didnt do a video for the vent install but its just flexible hosing run from the tank to a vent. just make sure the hose gradually goes upwards all the way towards the outside vent. no issues with smell or odors. this design is very similar to how scamp trailers vents their tanks.
gotcha.. the scamp reference helped. i looked at some blogs and some folks put a few pics on display. looks easier than going through the roof. thanks again.
Hi, I found this video while doing research for a trailer conversion, what black tank did you use? I would like to use a similar tank to that one, also what gallon capacity is it. Has it worked well for you?
Hi. I used a 17 gallon. Yes it is still working great, no problems. I believe I link to it in this video or another. Please get back to me if u can't find it and I'll see if I can help thanks
You want to use 4200 instead of 5200 for all above waterline installations. 5200 does not come off ever...at least not without a bunch of sanding and cussing..
Thanks I hope I don't either. Been using it for years on my boats. U can remove it with a heat gun. If I have problems I'll just throw that tank away and start fresh lol. Take it easy
Thanks for the videos. Your two black tank videos were by far the best on TH-cam! Question please: Did you have to move your Floor Flange up to accommodate for your flooring? Or is it fine being screwed to the sub floor and flooring on top. Thanks
I respect the skill involved here, but if I was building my own camper I think I'd prefer a standalone cartridge toilet. That way it could be kept tucked away in a cabinet to save space when camping at a place with decent toilets, used outside in one of those pop-up outhouse shaped tent things during nicer weather camping trips, and could be easily replaced if it ever malfunctions.
![fellow fellow - พรุ่งนี้ไม่มีใครรู้ feat. INK WARUNTORN [OFFICIAL MV]](http://i.ytimg.com/vi/QP6JyjYx_W0/mqdefault.jpg)
Nice Job.... I am in the process of converting an 8x16 v-nose cargo trailer into an RV and Mobile Sign Shop. I am just starting the walls and cabinets construction. I just sold a 15-passenger shuttle bus that I lived in for 3 years and traveled out west during the winters. I had to sell the shuttle bus because I purchased a large format color printer to make contour cut decals/stickers, koozies, t-shirts, magnetics, banners, mousepads, etc. The large format color printer would have taken up a lot of storage space so I needed to get something bigger. I did a complete conversion series on the shuttle bus from the ground up and now am doing a new series on the cargo trailer conversion. They are on my YT channel.
Nice! I'll check it out, thx!!
@@danielmid6022 thanks all are welcome to stop by
UNBELIEVABLE, First time seeing a actual install, EXCELLENT job
Great video Daniel thanks for sharing. Looks like the best toilet idea I have seen and will go with the same plan. Use something to protect your knees you will miss them when they are gone.
Thanks for sharing. Working on my build and had to vent my black tank on the side.
Very nicely done. Clear explanation. I have the same situation with an above floor tank.
Thanks Daniel for the video, and time spent putting it together. Huge help. I bought a used 7x14 that already had a toilet and sink installed. The older I get the more I become my dad. (His theory is- “The things you know the least about are the first things to fail.”) All I knew before this video was there was a black and gray tank and a foot pedal to flush. Now with your video I have a better understanding how everything attaches, seal maintenance and what to look for when it leaks. Big help! Thanks!
New Subscriber !
Thank you for the details!! So many bobblehead videos with "this is the finished product".
Excellent job! Straight forward and to the point. I have a 14' x 7' cargo hauler and considering a conversion. This is definitely a go to video. Again, well done Daniel.
Thanks!!! You won't regret converting your own camper.
Dan! That is great work!Thank you for taking the time to film and upload the install.
No problem, hope it is of some help!
Video explained in a simple and complete way. Thank you ....Beautiful project to do
There are multiple reasons you run the vent pipe up the wall, and out the roof. 1. The gases escaping through the vent will stink like crazy. Especially in the heat. You won’t want the sewer gas (that’s what it is, of course] to be down, lower to you at nose level; 2. Up high, with the right vent cap design, even a slight breeze “sucks” the sewer gases out the vent better. Some actually act like a Venturi valve, increasing suction; some even rotate in the wind to optimize airflow.
It's definitely not the right set up for every camper, but so far no problems. Just copied the way Scamp has been building their campers for years. Thanks for the comment! Take care.
Super helpful video. I'm thinking of going this route rather then buying a holiday trailer since the toy haulers are just built better overall plus you get alot more options for loading and hauling, but the girlfriends one request is it needs a bathroom with a "flushy toilet" so this a step in the right direction for me 😂
I needed this man! Thanks so much. Exactly the tutorial I had to have!
That's amazing man, really appreciate this video
Thank you for showing this!!! Very helpful. I love how the dogs look at it, realize it isn't ready for use yet and they go outside saying " man, I gotta poop outside again!" lol
Excellent job...great video
Good video thanks for the good instruction
Thanks for your detailed content.. I'm converting a shuttle bus and your information is fantastic! Thanks for taking the time.
Thanks for the info. You are doing exactly what I was thinking. Also live in Texas. Was going to try this before jumping in to a real toy haler to be sure I enjoy it.
Smart install - no worries about road debris damaging your tank.
At some time you may want to put a cut off valve right at the tank to the output. Just incase anything knocks loose after that at any time.
Can you show us how you vented with the black hose
How did you do you vent line and material did you use. Looking for the outside louvre and connection when you vented it out the wall
Nice work!
I'm thinking you needed to trim the flange because you have hardly any gap between it and the grommet. In most instances, where the tank is installed several inches lower, there would be a pipe extending from the flange to the grommet, correct? So the opposite situation would occur.
Did you have a problem with gasses coming into the inside without a p trap?
Great Job. Thanks for the video.
Very nice job
What toilet did you use don't see a link for that. Great video going To do this set up.
Engineering mixed with manufacturing:). I plan to build my own cargo trailer soon.
How did you attach the hard black plastic toilet ring to the floor it's too long to go flush with the subfloor and attach into the gasket
Hi it's been a long while but I think I had to trim the length so it would fit snug and flush
What parts did you use for your black tank vent? I need to do something similar for my toy hauler build. Awesome work by the way.
Tap the blue circle with the B in it and watch the updated video of my conversion camper. I went the easy way ....5 gallon bucket and a 13 gallon trash bag with a nice wooden toilet seat. Most campsites have a bathroom and I decided not to spend a bunch of money or time on a toilet and besides I dont like messing with poop in a tank. But that was a nice job. Will be waiting to see the rest of the project.
excellent work and vid . thanxs for doing this helps out a lot :) keep up the good work and following
Daniel, did you use a piece of 3” pipe between the grommet and the toilet flange or did the flange fit directly into the grommet? I know you did this quite awhile ago but I am just mounting my black and grey tanks and found your video.
I believe its a direct fit no pipe needed, but it has been a while
What toilet did you use?
I have the same trailer and black tank (both acquired after following your build). I'm considering putting it below deck in the next floor joist opening towards the rear. On the driver's side of the tongue. I confirmed fitment, just wondering if you gave any consideration to that location? Hopefully there's no evil surprise waiting for me. I figure this might allow me to center the toilet in the nose of the bathroom and with an elevated bath deck (could) probably just do 4") I can run the toilet drain with a nice pitch into the tank. Of course then it will have to be a roof vent...
pretty cool. So my question is, if you install a shower, which would require a P-trap also, would you have to build another little step up? Can you order these trailers in "tall" heights?
Tank working well still? Appreciate you posting this. If I understand the way you installed it is all the weight of the tank being supported by the lip going around the tank? No need for bottom support brackets?
Hi yes working great. I did run a plumbing strap under the middle. Don't run it too tight as the tank will expand as it is filled.
Great video. I looked at the link for your holding tank. Was it really 9 inches deep? We’re you able to drop it so it fit the main beam? I’ve been looking at tanks with less then 6 in deep.
Yours was 17 gal?
Beautiful & well done. But, the vibration due to the movement of the vehicle will cause your piping to wear out by friction because it is maintained by "metal straps" you would be better to fix them so that it does not rub.
Thanks
DM.. I used your technique for the black tank vent system. Where did you get the flexible hose? And what size is it?
Thanks and great work!
I believe it's 1.5" OD and I got it from our local hardware store u can find it on Amazon to
What kind of paneling do you have on that trailer(white walls)
Is it possible to install a few size bigger tires to give you a bit more ground clearance on these trailers? Most I've seen come with 15 inch tires . Or do you think this would be a waste of money and time?
definitely could if you wanted to. i did install a lift on this trailer for clearance.
Good job
Thanks! Been sitting on this footage for a while and wanted to post, just been so busy.
Hello Daniel.. I am converting a shuttle bus and am interested in the technique you used to vent your black tank. Did you make a video for that install? And, how has that method worked for you regarding odor, etc.? Thanks again for your content.. you have been a tremendous help! -Cypress, Texas
hi. i didnt do a video for the vent install but its just flexible hosing run from the tank to a vent. just make sure the hose gradually goes upwards all the way towards the outside vent. no issues with smell or odors. this design is very similar to how scamp trailers vents their tanks.
gotcha.. the scamp reference helped. i looked at some blogs and some folks put a few pics on display. looks easier than going through the roof. thanks again.
Hi, I found this video while doing research for a trailer conversion, what black tank did you use? I would like to use a similar tank to that one, also what gallon capacity is it. Has it worked well for you?
Hi. I used a 17 gallon. Yes it is still working great, no problems. I believe I link to it in this video or another. Please get back to me if u can't find it and I'll see if I can help thanks
So no level sensors?
No I didn't put a sensor on it. I do have a kit for it just never installed.
Am I the only one wondering where is the full view of the toilet
You want to use 4200 instead of 5200 for all above waterline installations. 5200 does not come off ever...at least not without a bunch of sanding and cussing..
What did you do about insulating the floor?
nothing as of yet, but plan to possibly spray foam everything underneath in the future. Just doesnt get crazy cold here so its not a priority.
3M 5200 is not a silicone. I hope you will never have to dismantle what you installed: 3M 5200 is a permanent bonding.
In addition, regular 3M 5200 totally cures within 5 to 7 days; they now produce a "Fast Cure" 3M 5200 that cures within 24 hours.
Thanks I hope I don't either. Been using it for years on my boats. U can remove it with a heat gun. If I have problems I'll just throw that tank away and start fresh lol. Take it easy
Thanks for the videos. Your two black tank videos were by far the best on TH-cam! Question please: Did you have to move your Floor Flange up to accommodate for your flooring? Or is it fine being screwed to the sub floor and flooring on top. Thanks
Thanks! It's been a while but I think I screwed the flange straight to the subfloor and cut the vinyl plank around it.
@@danielmid6022 awesome. Keep up the great work
I respect the skill involved here, but if I was building my own camper I think I'd prefer a standalone cartridge toilet. That way it could be kept tucked away in a cabinet to save space when camping at a place with decent toilets, used outside in one of those pop-up outhouse shaped tent things during nicer weather camping trips, and could be easily replaced if it ever malfunctions.
No.
@opossumgrylls3275 that's cute you think I care about your opinion.
@danp6897 thats cute. You thought we cared about your opinion and your crappy RV. Enjoy pooping in your over priced bucket.
35,615 views
What toilet did you use because my flange is just a flat metal bracket?
I can't remember the exact one. I thought it was listed in my description in one of my videos