HOW TO MAKE POWER BANK - DIY. I used 18650 Li- ion 2200 mAh Battery. You can buy Power Bank Module and Battery from Amazon.in. Please SUBSCRIBE my Channel to get more videos. Thank You.
Can we charge the powerdank and charge my phone at the same (Does it support passt through charging, two way charging) plz tell i want to buy this powerdank circut, and nice video
I had two of these modules and I lost them because they heat up so quickly during charging and even when they are connected to the battery. What is the reason for the problem
Sir here is one of my videoth-cam.com/video/w7I8tlZg6Oo/w-d-xo.html about a complete review of this module. You may find an answer to your question. Thank you.
Thanks for this video but you do not tall us What is the name of this piece and can it charge 3 lithium batteries connected in parallel.. ?? What is the charging current ..??
This is 6600 mh powerbank. After it full charged a smart phone can be charged one time. Then you should charge it. If you connect more cell in parallely the power wil be increased. Thanks for your valuable comments.
@@MrSM-ui4zj it doesnt work actually they go on and off when charging..unstable..do you know how i can connect them for example 4 pieces on 1 battery thank you
All batteries should be connected in paralel and you need a power bank module which is available in the local market. Otherwise a single usb will not work. Thanks.
Hello. My problem is that when I am charging the cell phone after 10 seconds the charge is cut off and you have to disconnect it and reconnect it. What is the cause of that? can this protection be bypassed? Thank you very much
Don't waste your money & time this module is suitable for charging keypad phones with connected one battery on module or you try like this shoen in video it is not working & module is damaged 😊😊
Sir here is one of my videoth-cam.com/video/w7I8tlZg6Oo/w-d-xo.html about a complete review of this module. You may find an answer to your question. Thank you.
The name of device is '3.7v lithium ion battery charging module.' Is available in the market. Please serch in amazon and flipkart. Thanks for your valuable comment. If any problem write in comment box.
Sir here is one of my videoth-cam.com/video/w7I8tlZg6Oo/w-d-xo.html about a complete review of this module. You may find an answer to your question. Thank you.
Ay va a amanecer cargando porque lo primero las baterias tienen que mantener la carga de 4.2 voltio lo segundó el modulo de carga tiene que alterar la corriente de 4.2 voltio a 5.1 o 5.2 o5.3 pero ay modulo que en ves de alterar a esa sifra se mantiene en 4.2 voltio yo fabrique uno con 5 baterias en paralelo y me da 2 carga de 0 a 100 y una de 0 a 25
@@Melfy.Junior fíjate hermano el que ise se lo di a un amigo pero conseguí un módulo reciclado igual la baterias recicladas pero en buen estado las cargué las pilas y durante un mes mantuvieron la carga en 4.2 voltio las agarre y las conecte en paralelo explicaba que ay modulos que en vez de subir la corriente de 4.2 a 5.2 algunos llegan a 4.4 no es suficiente el que arme fue reciclado todo y perfecto trabajaba pero lo regale hermanó
Disassembled a working powerbank then assemble it back but this time he video record it and upload it to TH-cam and call it DIY i see what you did mister😂😂
Sir here is one of my videoth-cam.com/video/w7I8tlZg6Oo/w-d-xo.html about a complete review of this module. You may find an answer to your question. Thank you.
Here the all cells are connected in parallel. So the voltage will be the same i.e. 3.7 volt. The powerbank module convert 3.7 volt to 5 volt for charging the phone. Without powerbank module we should not try to charge our phone. Thank you for your valuable comment.
Sir here is one of my videoth-cam.com/video/w7I8tlZg6Oo/w-d-xo.html about a complete review of this module. You may find an answer to your question. Thank you.
Perpect and great sharing
Can we charge the powerdank and charge my phone at the same (Does it support passt through charging, two way charging) plz tell i want to buy this powerdank circut, and nice video
Al preparar la batería¿Se pone directo a la la moto para el motor de arranque?
How many 18650 batteries can we connect like this for this board?
Buenas noches mira es que tengo un módulo TP4056 este me sirve para cargar 3 baterías igual como en el video, un saludo desde Bogotá Colombia Dairo
Can i use Lithium polymer batteries of 3.7 volts?
Can I add more batteries for the same board ? and what should be the maximum number of added batteries ?
Yes, sure. Any number. Then the powerbank charging time will be increased. Thanks.
Dear Sir, why green light turn off after few second battery connecting.
Nice n easy
Thanks.
انت حيل في شغلك 👌😂
Good hit 👍👍 🇮🇳 || Kuki
Fantastic job
Thanks.
Good luck my dear friend and family
How much volt does your battery release before being converted to 5v?
3.7 volt before convertion. Because all cells are connected in parallel. Thanks for your valuable comments.
Podré cargar 8 pilas así en paralelo con ese circuito tp4956 ??
excellent
whats the name of the wire please that are connected to the batteries
idontknow what its called
How may times use power bank bro
Hi can we use this for led lights if how meny cells required please gide me
At first we have to know what type of led light we shall use and what is the maximum wattage of led light.
@@MrSM-ui4zj I want 30 v are below 6 lights
Super bro..
Thanks.
Bravooooo
Voltage අසමාන battry 2k demmata kamak nadda
Hello! Can I use battery holders for this project? Sorry if I'm being ignorant but I really need ot for my research study. 😭
Yes and you can use any 3.7-4.2v battery
멋지네요
Connect B kit ki keemat kya hai.
Hlo plz reply can i use 4batteries of 2000MAH for this?
Yes.
How to make power benk with 12v solar charger??
Can I put batteries of different mah in a power bank?
It will work but lower amp cell may be heated.
Data sheet of 18650 cells ?
Good
I had two of these modules and I lost them because they heat up so quickly during charging and even when they are connected to the battery. What is the reason for the problem
May be the modules were supplied to you were defected or there are something wrong in your connection. Thanks for your valuable comments.
Sir here is one of my videoth-cam.com/video/w7I8tlZg6Oo/w-d-xo.html about a complete review of this module. You may find an answer to your question. Thank you.
Thanks for this video but you do not tall us What is the name of this piece and can it charge 3 lithium batteries connected in parallel.. ??
What is the charging current ..??
When few cells are connected in parallel the voltage will be the same but the ampere will increase. Module name: power bank module. Thanks.
Can a solar battery can be used
Battery should be 3.7 volt and rechargable.
Useful video..
Thanks.
How many battery is advisable to use on the board
Change the module with a better one and add more cell in parallel. It is for verry beginner. We should use BMS for each cell actually. Thanks.
its a power bank...but dose it charge? because if not then its a one time use
Yes it does charge. Thanks for comment.
I have a 2600mah battery in a 1 power bank that I modded changed the battery but now it charges way too hot??
You can replace the power bank module with a 2.1 A power bank module. I hope the problem will be solved. Thanks .
It gets very hot when charging the battery and mobile... Is it normal?
Battery will warm up. not verry hot but the module will get hot. Thats normal condition. Please check connection. Is it the same module?
@@MrSM-ui4zj yes... its the same module that you are using.
18mn for 2 wire and 3 battery 😱
Depends upon the load and charging current
اخي من اين اشتري شنبر تجميع البطاريات اللثيوم
Thank you
Welcome.
Bhi ye module kahan se le sakte hein
Local market me e milta hay avi. Boliyega dukanme iska nam powerbank module. With display vi milta hay. Thanks.
বোগদার ঘরের বোগদা এটা করতে এত সময় লাগনি?
Sir, how much time it charge mobile ?
This is 6600 mh powerbank. After it full charged a smart phone can be charged one time. Then you should charge it. If you connect more cell in parallely the power wil be increased. Thanks for your valuable comments.
Thank you so much sir.
Can we use 8000 mah battery for this
Yes, of course. Thanks for comments.
Bang untuk 1 modul powerbank bisa angkat berapa buah baterai trims! 🙏
Watts and amps of the modul?
6.6 Amp hour. watt=30.
@@MrSM-ui4zj Hallo. Ich habe folgendes Problem. Wenn ich diese Powerbank (vollgeladen) an das Handy stecke geht sie aus.
Hi sir, how do i know when the battery are full?
When the battery will be full charged the red light will be changed to green or blue. Thanks for comment.
@@MrSM-ui4zj I wen the Powerbank on the Smartphone the Powerbank get Out. My charging Module ist with a small black Button.
It do charge the battery but apms are too low around 100-400ma
What was the discharge amperage of the module
1 amp (max). Thanks for comments.
For example I used 3.5v battery, does it will be converted to 5v output using the power bank module?
Yes sure. This module can do this.
Bro isme battery protection hai
Battery protection module me hay.
charge kitna time is power bank ko
1 hour approx.
@@MrSM-ui4zj thnx bai
Sar is module Mein 3.7 volt 2 ampere ki battery Lagane se ya module kharab ho gaya what is the reason
Module is not genuine.
Charging bord kitane paisha mein atha hai bhai
Rs.80 /- in local market. Thanks.
How many hours can it charge before being lowbat? And how many hours should I charge this powerbank?
Please reply. I really need it for a project 😭
Red light will be changed to blue or green when it charged fully. Thank you.
Tnx
I made it
Thanks.
Agar isko lekar flight me jaye to koi
Dikkat to nahi hogi na
It is inner part of the Power Bank my friend. We should cover it with a nice enclosure . Thank you for your valuable comment.
12 volts je pense c Bcp pour un téléphone et le module aussi merci
Cai j2 nay con hok
الله ينور عليك
Iske is problem ka Hal hai to batao
Use solder paste for conucting bateri
Thanks for sugestion.
add more usb on same battery ?
Yes u can do that. Thanks.
@@MrSM-ui4zj it doesnt work actually they go on and off when charging..unstable..do you know how i can connect them for example 4 pieces on 1 battery thank you
@@MrSM-ui4zj want to make a 4 port diy powerbank
Can you charge and discharge simultaneously
Yes. But not recommended.
شكرا جزيلا
Please write in english. Thanks.
සියල්ලටම කලින් ඔයා හොඳ බවුත් එකක් ගන්න
ඔයා පාස්සන විදිහ දැක්කම එපා වෙනවා 😊
Nice video but horrible cold welds
Thanks for comments.
Up to how many mAh battery is this supported sir??
Any. But all batteries should be same. Thanks.
Температура микросхемы ht4928s достигает 65 градусов Цельсия - аккумулятору будет плохо.
Bhai maine 8 batter lgai mgar nhi bna Single usb thi please give me reason
All batteries should be connected in paralel and you need a power bank module which is available in the local market. Otherwise a single usb will not work. Thanks.
How can I know that the battery is full?
wait till the battery explodes
@@monipallavdutta🤣
how much houre we want to charge
3 to 4 hours. Thanks.
Hello. My problem is that when I am charging the cell phone after 10 seconds the charge is cut off and you have to disconnect it and reconnect it. What is the cause of that? can this protection be bypassed? Thank you very much
The module is weak and over heated. It may be defected. Try with other one.
Thanks for your answer. Cheers
what the name of ic?
The module is available in the market.
The Module Is Available On Flipkart & Amazon Too
पुरे दीन चार्ज मे लगाकर रखोगे तो
बैटरी फूल चार्ज नहीं होंगी
Don't waste your money & time this module is suitable for charging keypad phones with connected one battery on module or you try like this shoen in video it is not working & module is damaged 😊😊
How much time does this module take for charging 1battery
පැයකට ආසන්න කාලයක්
battery name
18650 battery 3.7 volt lithium ion Rechargable. Thanks for comments.
Hum maximum kitani battery use Kar sakate hai
In parallel connection any number of cell can be added. Thank you for your valuable comments.
Sir here is one of my videoth-cam.com/video/w7I8tlZg6Oo/w-d-xo.html about a complete review of this module. You may find an answer to your question. Thank you.
Mantaaaaaap salam dari BOGOR INDONESIA Mr
What is name of dvce I like it verygood keep it up
The name of device is '3.7v lithium ion battery charging module.' Is available in the market. Please serch in amazon and flipkart. Thanks for your valuable comment. If any problem write in comment box.
At Erode bustand I have buy like this module for 60ruppes
Then you can make it. Just few simple connection. Best of luck. Thanks.
Can I use this module for 4 batteries
You can increase any number of batteries. The connection will be kept the same. Thank you for your comment.
Sir here is one of my videoth-cam.com/video/w7I8tlZg6Oo/w-d-xo.html about a complete review of this module. You may find an answer to your question. Thank you.
Main ne module lia is k ooper or neeche donon side per battery ka positive or negetive hai main kis k sath battery attach karoon
Dono ek hi he
ভাই
Sir show the Blue Light Full Charging This Module ??
There is a single red light. That blinks during charge itself. When the powerbank charged fully the light will stop blinking.
@@MrSM-ui4zj Thanks
6600 mah 3,7v
Yes. But the module stepped up to 5.0 v for charging mobile phone in 1 amp current rating.
See the video in 2x playback speed
Ok sir no problem. Thanks for comments.
Tumhe soldring tak to karni aati nahi
Tumne kiya kya hai is video me
Ay va a amanecer cargando porque lo primero las baterias tienen que mantener la carga de 4.2 voltio lo segundó el modulo de carga tiene que alterar la corriente de 4.2 voltio a 5.1 o 5.2 o5.3 pero ay modulo que en ves de alterar a esa sifra se mantiene en 4.2 voltio yo fabrique uno con 5 baterias en paralelo y me da 2 carga de 0 a 100 y una de 0 a 25
English please.
Podría pasarme el que fabricaste?
@@Melfy.Junior fíjate hermano el que ise se lo di a un amigo pero conseguí un módulo reciclado igual la baterias recicladas pero en buen estado las cargué las pilas y durante un mes mantuvieron la carga en 4.2 voltio las agarre y las conecte en paralelo explicaba que ay modulos que en vez de subir la corriente de 4.2 a 5.2 algunos llegan a 4.4 no es suficiente el que arme fue reciclado todo y perfecto trabajaba pero lo regale hermanó
Disassembled a working powerbank then assemble it back but this time he video record it and upload it to TH-cam and call it DIY
i see what you did mister😂😂
Nope haha i can do that but first i will buy powerbank module
kirdyk to accumulators...overheating
इस मॉड्यूल से बैटरी को चार्ज करने में बहुत ज्यादा समय लगेगा क्योंकि ये मॉड्यूल बैटरी को चार्ज करने के लिए 0.8Amp ही सप्लाई देती है।
I use single 3.7v battery but did not charge my phone why
The smart phone requires 1 amp to 2 amp charger. So we should use multi cell for making Power bank.
Sir here is one of my videoth-cam.com/video/w7I8tlZg6Oo/w-d-xo.html about a complete review of this module. You may find an answer to your question. Thank you.
Why isn't it working for me?🙁
I did everything like you did though 😭
May be the module is damaged.
Aisee mat rakho circuit ko battery ke upor....... Bohot heat generate karta he...... Ye battery ko heat karke zala sakta he!
6600 mha.. 6.6 amp
Yes and you can increase by connecting more battery in parallel.
Sir if we use 3 batteries will it damage the phone....?
Here the all cells are connected in parallel. So the voltage will be the same i.e. 3.7 volt. The powerbank module convert 3.7 volt to 5 volt for charging the phone. Without powerbank module we should not try to charge our phone. Thank you for your valuable comment.
Sir here is one of my videoth-cam.com/video/w7I8tlZg6Oo/w-d-xo.html about a complete review of this module. You may find an answer to your question. Thank you.