@@wayland7150 Drivetribe have a brand partnership with Liqui Moly which is a competitor of Castrol so they don't want to look like they're promoting them
Cannot believe that is the same engine from the first video. Stunning work, Mr. Lenthall, just stunning! ^_^ Cannot wait to see where this beautiful little monster winds up! ^_^
I personally think twin-charging a engine is better than a supercharger or twin turbo and if youse do decide to twin-charger the engine mark sure to put a clutch on the supercharger so that it does drag on the engines power at high rpm
Bearing tangs are not there to keep them from spinning. Bearing crush is what holds them in place. The tang is simply to locate the bearing during installation.
Love the Jag 4.2 i6, we had an XJ 4.2 when I was in my teens, what a car. Ours needed paint but otherwise the body was dent/rust free and mechanically she ran like a top. Plenty of grunt and so smooth.
I watched this and should be marvelling over the engine, but all I can think about is how many people watching this know what a chanter is... You should've gone all in with a full set of bagpipes!.. ;-)
The Scottish population Myselef included, will know what the chanter is and from what part of the pipes it’s from but most of the English population wont
Cool video, enjoyed that!! Nice to see a bit of detail. Bottom end looks very strong, keen to see just how big the Garret is and what it ends up powering
We i used to build big HP engines, i would always select engines that had been sitting outside for years (302 & 351 Clevelands, Intech 6's, Buick V6, 250 Crossflow- Aussie engines). Would go out of my way to buy engines from down south (NSW, Tasmania etc) where it snows; these weathered engines once cleaned & built, never gave an issue as they had been "seasoned", never suffered cracked blocks or heads, never any leaking issues (even with 38psi+ of boost).
I have an XJR6, and they are an absolute BUGGER to work on. At least in the car, there is zero access. All the fiddly bits are under the intercooler so you have to access from underneath. But you do get 4.0L, more than your standard Japanese straight 6. And when its working it goes like a train.
Keep that cam cover well hidden or it may be ending up on the AJ16 in my Silk Cut purple XJS race car! Surprised this motor isn't bound for a racer with your ties to Swallows and now working with Tom too, surely you should keep it supercharged, plonk it in an X300 and join the party 🏁🏁🏁
Beautiful work! I hope Emma brings in a lot of money for charity. I'm curious though, how much would all that restoration/rebuilt work have cost a normal person coming in off the street?
Only thing to say. If use gasket selent. Let coure. One week before starting. If selent is hard. Will never be in the pickup in oil pan. God bless mate. Mick au. ) grand father from there. )
Turn Yuki into a high downforce time attack monster! It would be great to see it do grip driving! And then turn it into a drift car and then turn it into an off-roader I will watch all of it!
Why does Fernie keep advertising Redbull (sponsored athlete style) but they blur out Castrol from Tom? Is it just because the show is sponsored by Liqui-moly?
There will be a clause in their contract with Liqui-Molly that says they won't promote any other suppliers of products they make which will force them to blur things like Castrol
I wonder if you could turbo the thing instead of supercharger, like one of those 2JZ Turbochargers. All in All, I think you should put it in something interesting. Like a 350Z, or an E30.
I've got an X300 supercharged lying around. I bought it to put back on the road but now thinking about putting the engine in either my 66 E Type or my 69 420G
It's just beautiful but what should it go in, something crazy like a spitfire to get an absurd power to weight or something more sinister like a Mark II or later sedan?
Gotta love a shop who's primary electrical system is extension cords tied to socket boxes. Where I live, the nanny state forbids extension cords for this type of use.
Whack a big ol snail on it, and stuff it in Vauxhall Carlton estate and give it a purple Silk Cut Jag inspired livery. You know it would be good.
We can still tell tom is wearing a castroll logo on his shirt 😂 props for realizing it during filming.
yep 0:35 if it wasn't obvious before
It’s better advertising for Castrol them bluring it. It’s draws our attention to it and we all know what it is. 😂
The funny thing of bluring it is that it draws more attention to it.
I believe it's Castrol.
Castrol is what jlr recommend
I’m pretty sure Tom has always got a permanent smile on his face, he’s awesome.
I love how they blurred out the Castrol on Tom's jumper, right as he was standing next to an unblurred Castrol container at 3:38
They will edit this video the second they read this comment. Lol
What am I missing? What's wrong with Castrol?
@@wayland7150 Drivetribe have a brand partnership with Liqui Moly which is a competitor of Castrol so they don't want to look like they're promoting them
@@wayland7150it's because the build is sponsored by liqui moly a direct competitor
@@benllewelyn98 Yeah, I spotted that eventually, thanks.
Whoever did the blurring on Tom's jumper did a cracking job.
Just imagining AutoAlex impersonating Toms laugh 😂😂
😂
HHHHAAAAA..........HA.........HAHA.......HAAAHHHHAAAAAHHAHAHA 🤣
@AutoalexCars that's made my day 😂😂😂😂
@AutoalexCars alright tom?! No I'm fecking not..😆
Thank goodness there are still people like Tom around. An absolute legend.
Ah I thoroughly enjoyed that! Love the deep dives! Tom is such a legend, the depth of knowledge that man possesses is ridiculous.
Tom is an absolute legend.
Tom is such a joy to watch. Always remain humble👌
Cannot believe that is the same engine from the first video. Stunning work, Mr. Lenthall, just stunning! ^_^ Cannot wait to see where this beautiful little monster winds up! ^_^
Is it the same engine when 80% of it is new parts? Same block new everything else.
Next time you have Tom Lenthal on put him in the thumbnail! I would have watched this yesterday.
Hearing an English mechanic say "Job's done" is just a good feeling, there's no BS behind it.
Love the tom lenthall love, boys a diamond in the rough
Boost it to four digits and drop it into XJS with reworked suspension and brakes.
1000 lbs of boost?!! 😂😂
@@Crazy_Adventureseven better, 1000 bar of boost!
Put it up against an Aussie Barra 4.0L straight six
that engine is very much like the sohc, the cam drive looks identical lol
I have been wanting to see a built AJ16 take on the Japanese 6 cylinders, thank you!
I've got one of these AJ16 on my driveway and an AJ6 in front of it as well, great engines, easy to work with and pretty much indestructible.
i love this iteration of drivetribe. it is in great hands and mike is a proper petrolhead
I personally think twin-charging a engine is better than a supercharger or twin turbo and if youse do decide to twin-charger the engine mark sure to put a clutch on the supercharger so that it does drag on the engines power at high rpm
I just sold my 4.0 AJ16 XJ6 today, so this is a goodbye of sorts for me. It is a phenomenal engine. Powerful, smooth, and the sound is tremendous.
Gives me vibes of i have had the same broom for 20 years. "mind you the broom has had 17 new heads and 14 new handles"
Love it Tom. Your not getting taking over it’s your shop and your way. Go on man
Tom is the OG, top top top top bloke, fun friendly and insanely knowledgeable
Bearing tangs are not there to keep them from spinning. Bearing crush is what holds them in place. The tang is simply to locate the bearing during installation.
Love the Jag 4.2 i6, we had an XJ 4.2 when I was in my teens, what a car. Ours needed paint but otherwise the body was dent/rust free and mechanically she ran like a top. Plenty of grunt and so smooth.
It's a pleasure to watch you! Growing as a presenter! 💪
Tom is an absolute legend I’ve had the privilege of meeting him a few times mikes not bad either
Mike....... That engine deserves a nice Mk X or 420G home and a whole lot of titanium intake and exhaust for bling..... :-)
Jaguar XJS with a bonkers amount of power in would look amazing! Keeping it looking stock/oem+ but with new suspension and brakes to match the power!
I watched this and should be marvelling over the engine, but all I can think about is how many people watching this know what a chanter is... You should've gone all in with a full set of bagpipes!.. ;-)
The Scottish population Myselef included, will know what the chanter is and from what part of the pipes it’s from but most of the English population wont
@@damiantaylor7993Maybe replace "English" for rest of the world. That's from an Englishman😕
@@heilandgunner I'm an American Southerner, and I knew what it was....then again I'm a bit weird, I actually took bagpipe lessons for a while at uni!
Nice to have an actual subject on this video and not another piece to camera.
Cool video, enjoyed that!! Nice to see a bit of detail. Bottom end looks very strong, keen to see just how big the Garret is and what it ends up powering
21:05 those cam lobes are super pointy
The E type is going to look a million bucks in the sun ☀️ 💪🏻👌🏻🏁
We i used to build big HP engines, i would always select engines that had been sitting outside for years (302 & 351 Clevelands, Intech 6's, Buick V6, 250 Crossflow- Aussie engines).
Would go out of my way to buy engines from down south (NSW, Tasmania etc) where it snows; these weathered engines once cleaned & built, never gave an issue as they had been "seasoned", never suffered cracked blocks or heads, never any leaking issues (even with 38psi+ of boost).
Tom is awesome! Can't wait to see this engine going into a car.
Love it, this reminds me of my dad teaching me how to do this, and has inspired me to do this with my kids, it’s a handy skill to have😉❤️
Trigger's Broom 😂
Can’t wait to see what this engine will do with some real boost ! It’s going to be a torque monster 💪🏻🏁
It’s a shame Tom didn’t put a baffled sump on Tavarish’s XK 😂
I've always wanted to turbo a Jag engine!
The one pound block looks amazing
that's pretty light, isn't it?
Go nuts, gentlemen. Unleash the beast.
Awesome stuff! Keep up the great work. More restorations!!!
23:32 heads up. That transit is tailing you. Quick, call the rozzers
its the camera car
@briocheman21 yup that what I thought
How long did it take to move all of AutoAlex cars out before filming ?
I'm out of the loop, is there beef between this channel and AutoAlex? Is is this just a shop that works with both?
@@AccAkut1987 Tom does work with both , if you watch AutoAlex you would get it , Alex always seems to have a few of his cars going to him .
@@AccAkut1987 No beef. It's more a joke because AutoAlex always have atleast 1 car in his shop (usually Big Pete)
@@AccAkut1987 No issues/beef, Alex just use Tom's place as a 4th car park.
Big Pete is probably in the scrap by now 😂😂
Great episode thank you. Looking forward to seeing where that ends up.
Lenthall for the win!
Can't wait to see where this engine will land in 😊❤
Can't wait to see what you put it in
Definitely interested in seeing more on this engine it's my fav thing on drivetrive love engines and love tom
Absolutely love big Tom, awesome guy
Engine needs to be in an another Jag. May be a modified xk
Beautiful work gentlemen 👏🏻👏🏻👏🏻🇬🇧
I have an XJR6, and they are an absolute BUGGER to work on. At least in the car, there is zero access. All the fiddly bits are under the intercooler so you have to access from underneath. But you do get 4.0L, more than your standard Japanese straight 6. And when its working it goes like a train.
23:12 Toms got the Simon from inbetweeners trim.
Don’t cry Si
Tom is a legend
Stick it in a x-type diesel estate body 👍🏼
The sound will be phenomenal 👌
Keep that cam cover well hidden or it may be ending up on the AJ16 in my Silk Cut purple XJS race car! Surprised this motor isn't bound for a racer with your ties to Swallows and now working with Tom too, surely you should keep it supercharged, plonk it in an X300 and join the party 🏁🏁🏁
18:30 Tilly's Orifice. Respect to Miss Shilling.
Beautiful work! I hope Emma brings in a lot of money for charity.
I'm curious though, how much would all that restoration/rebuilt work have cost a normal person coming in off the street?
Maybe Hammond will want this engine for a race car for next season? He certainly seems to be learning racecraft fairly well.
Only thing to say. If use gasket selent. Let coure. One week before starting. If selent is hard. Will never be in the pickup in oil pan. God bless mate. Mick au. ) grand father from there. )
I need more updates on this!! I have a 95 XJS with the AJ16, and, I too, am trying to mod it!
Turn Yuki into a high downforce time attack monster! It would be great to see it do grip driving! And then turn it into a drift car and then turn it into an off-roader I will watch all of it!
Why does Fernie keep advertising Redbull (sponsored athlete style) but they blur out Castrol from Tom? Is it just because the show is sponsored by Liqui-moly?
Yes.
Because Liqui Moly is CLEARLY THE SUPERIOR PRODUCT AND NOBODY WANTS TO HEAR YOUR OPINION ANYWAY!. Have a nice evening :)
There will be a clause in their contract with Liqui-Molly that says they won't promote any other suppliers of products they make which will force them to blur things like Castrol
Should take a look at the Barras from Australia ;)
Lets go build a british barra!
I wonder if you could turbo the thing instead of supercharger, like one of those 2JZ Turbochargers. All in All, I think you should put it in something interesting. Like a 350Z, or an E30.
They are going to turbo it.....he mentioned Garrett at the end of the video, and Garrett don't make superchargers. Also, The 2JZ had 2 turbos.
@Mardy72 some people swap it for a single turbo and still make more power
I've got an X300 supercharged lying around. I bought it to put back on the road but now thinking about putting the engine in either my 66 E Type or my 69 420G
Love these style of videos!
Bang it in a ford Capri or a Jenson interceptor MK3 with a snail 5-600whp
Love this... rebuild all the sixes 🙌🙏👌
Go for it!
awesome! now install it in a Merc 190E or in a Ford Capri or something cant wait!
Emma is a beautiful car. I wish I could afford that. I love it
It's just beautiful but what should it go in, something crazy like a spitfire to get an absurd power to weight or something more sinister like a Mark II or later sedan?
Triumph GT6 would be good with this engine
Gorgeous E-type 👍
The musical part reminded me of the Mitchell and Webb Show.
I'd drink Castrol before I'd drink Red Bull.
Daves auto center watching this is like when we see a video of some Asia based workers doing an engine.
All they missing is the sandles
Trigger's brush springs to mind 🤔
Wheres the measuring? Have they matched the bearings to each journal? Did they check the oil clearance?
Might be interesting in a later model XJS
What a transformation. What chassis to stuff it in: Miata is always the answer. ;)
Gotta love a shop who's primary electrical system is extension cords tied to socket boxes. Where I live, the nanny state forbids extension cords for this type of use.
Shhh!
Why not twin charged like the lancia delta s4 rally car and put it in a tvr
Great episode
Tom legend
another fernie video, I'm done
Is it just me and that at 23 minutes and 58 seconds in that red jaguar blew out blue puffs of smoke?
Nice Jag!
Is there anything to be said for whacking it in the Smallest Cog's racing MG?
So by "saved an engine" you mean you kept a block and then purchased an entire engine to bolt to your 1 quid block?
Isn't the crank supported by bearings?
I don't think they 'purchased' anything other than the head.
I've been looking forward to this
PLEASE PLEASE put her in a full resto mod mk2 jag. Done in very similar way to Eagle and their stunning e type.
go for it!
Go nuts Fernie, Jimmy Jag wont be far behind you