At the time I had a low end 60 gallon air compressor and wanted this gun but their was no way it would work, So I bought the GPI from spraygunsdirect and love it In the US all they will only sell you HVLP air cap, and they're garbage. I just added a used 2nd low end air compressor and combine both, now I have 80 gallon and 20 scfm @ 90 psi And now I want this gun, The gunnman's review on the GPI is spot on for the hobbyist, love it Thank you Gunnan 👍
Hi GunMan I’m literally contacting you from the other side of the world to let you in on the Sata Secret that not only will change your mind about the Sata but it may also change your mind on every spray gun that you have ever used! So it’s like this I noticed that you only get the Sata digital guns and you don’t use a regulator on the bottom of the gun. Then you set the pressure on the gun using the air adjuster on the gun that is the critical element and mistake that will always always always make Sata spray poorly. The maximum pressure entering the gun must be set at the recommended pressure. So it’s 29 psi for HVLP and 32 psi for the RP. The air adjustment on the gun should be fully open unless you want to lower the pressure by one or two psi I’d say 5 psi max. This is because the air adjustment on a Sata is a micro adjustment and if you close it down too much the air velocity at the air cap is too high. Sata guns are designed to spray with all the adjustments wide open air, fluid and fan but the correct size tip will make the difference between runs and mirrors. So 1.2 RP for the win but adjust the pressure entering the gun to a maximum of 32psi Bless
Gunman your technique and movement is so perfectly fluid like fine tuned robotics. Just sprayed wifeys 88 mustang GT last weekend with my Bellaria. The upol clear was 8rs old unopened. 10% reducer added to last coat to help it flow. The results were acceptable but I seem to do better with the GPI, that gun always delivers ! Cheers ! 😁
Gunman you personally raised the price on these . I bought mine 2 years after your review 2017ish for $170 USD. If you can even find the gun it's 500 now.
Very enjoyable Gunny it's great to see the Bellaria doing it's thing as you don't often see people using them these days. I have the 1.3 Bellaria and every time I use it I always have a smile on my face as it seems to have a very dense fan on it which helps you to see where you are going, the fan just looks different to other guns, I have the WS400 Series2 digital which costs 3 times the price but it's not 3 times better than the Bellaria which makes it good value for money👌🙏👍John UK.
Hey Gunman do you have any videos made on how to replicate different peels as it's easy to go for a flat finish but half these Chinese cars coming out are very peely just would love some insight on it. Cheers just returned to the industry after 6.5 years out.
Wassup Gunman, do you think a 26 gallon kobalt compressor can run this gun? I haven’t had time to look up the specs on cfm yet. Sorry if it’s a dumb question!
At the time I had a low end 60 gallon air compressor and wanted this gun but their was no way it would work, So I bought the GPI from spraygunsdirect and love it
In the US all they will only sell you HVLP air cap, and they're garbage. I just added a used 2nd low end air compressor and combine both, now I have 80 gallon and 20 scfm @ 90 psi
And now I want this gun, The gunnman's review on the GPI is spot on for the hobbyist, love it
Thank you Gunnan 👍
The GPI and Bellaria both use about 9.5 cfm @29 psi highly efficient
All iwatas have great atomisation, those fluid tips do work well
I have this gun and man it lays clear down excellent!! No painting slow with it that’s for sure!
Hi GunMan I’m literally contacting you from the other side of the world to let you in on the Sata Secret that not only will change your mind about the Sata but it may also change your mind on every spray gun that you have ever used!
So it’s like this I noticed that you only get the Sata digital guns and you don’t use a regulator on the bottom of the gun. Then you set the pressure on the gun using the air adjuster on the gun that is the critical element and mistake that will always always always make Sata spray poorly. The maximum pressure entering the gun must be set at the recommended pressure. So it’s 29 psi for HVLP and 32 psi for the RP. The air adjustment on the gun should be fully open unless you want to lower the pressure by one or two psi I’d say 5 psi max. This is because the air adjustment on a Sata is a micro adjustment and if you close it down too much the air velocity at the air cap is too high. Sata guns are designed to spray with all the adjustments wide open air, fluid and fan but the correct size tip will make the difference between runs and mirrors. So 1.2 RP for the win but adjust the pressure entering the gun to a maximum of 32psi Bless
Gunman your technique and movement is so perfectly fluid like fine tuned robotics. Just sprayed wifeys 88 mustang GT last weekend with my Bellaria. The upol clear was 8rs old unopened. 10% reducer added to last coat to help it flow. The results were acceptable but I seem to do better with the GPI, that gun always delivers ! Cheers ! 😁
Gunman you personally raised the price on these . I bought mine 2 years after your review 2017ish for $170 USD. If you can even find the gun it's 500 now.
Still waiting for you to do a review on the series 2 w400
Saw todays insta post its shit
Iwata a lovely job 👍🏼
Very enjoyable Gunny it's great to see the Bellaria doing it's thing as you don't often see people using them these days. I have the 1.3 Bellaria and every time I use it I always have a smile on my face as it seems to have a very dense fan on it which helps you to see where you are going, the fan just looks different to other guns, I have the WS400 Series2 digital which costs 3 times the price but it's not 3 times better than the Bellaria which makes it good value for money👌🙏👍John UK.
Hey Gunman do you have any videos made on how to replicate different peels as it's easy to go for a flat finish but half these Chinese cars coming out are very peely just would love some insight on it. Cheers just returned to the industry after 6.5 years out.
Class as always gunny 🤙
굿 건맨 Good Gunman 👍 👏
so good man !!
Hey Gunman,
It's always awesome watching you in action man.
Get out there and paint some shit.
✌️ Peace
Wow i love it
Merry Christmas and Happy Boxing day !
Too kralju
I love the Iwata guns all i ever use 1.2 & 1.6 brilliant finish
BUONA PASQUA E PASQUETTA 😂
What fluid tip are you using?
We need the kiwami 4 review gunny!
It's the same as the old bellairia, only thing that differs is the gun body and threads in the air cap
Brain at paint society did a review on this gun also.
Pete's hobbies has a video of the kiwami4 ba4j and the w400 bellairia in comparison to one another
Wassup Gunman, do you think a 26 gallon kobalt compressor can run this gun? I haven’t had time to look up the specs on cfm yet. Sorry if it’s a dumb question!
I believe a 20 gallon can run this if I remember correctly
I ran mine with a 28 gallon. I had 11cfm though. What’s your cfm? That is also an important factor
Thanks for the responses. I don’t know the cfm just yet. Looking to purchase the kobalt 26 gallon compressor.
Is the bellaira from Amazon actually legit ?
Probiere Anest Iwata Kiwami 4 BA4-2
👍👍😎😁
w400?
what clear are you using?
1.3/1.4?
You should wait between first and second coat at least 10min...
is that even legal?, you need to keep your 'guns' in a safe, and unloaded!!, or at least have the room locked.
Isn’t there a flash time dude , nice work 👍🏻
Depends on the clear