DJI Mavic Pro - Full Gimbal Repair - Found this very hard!!
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- Having never done this before I found this a very tricky repair. Not so much taking it apart but getting the flex cables back in. Took me the best part of an hour to complete the repair with no experience doing this.
All in all it was an enjoyable experience, and replacing two flex cables vs a whole gimble saved me a couple of hundred pounds. I would recommend having a go if you have the same issue.
Flex Cable: amzn.to/3ewcuiN
Video Cable: amzn.to/3KZZSwu
Enjoy the video, please like and sub if its been helpful.
Just come across your video, I replaced the ribbons and video cable on my Mavic Pro successfully, but as you found it's not an easy job, I found a step by step video which was 45/50 mins long and kept referring to it, I found the plugs on the ribbons and other ones you have to remove very tricky to get plugged back in correctly, I must say I was very surprised when it worked correctly, that was about 2 years ago and she's still flying,
Glad to hear you did it, agreed very fiddly this one
Thanks for sharing your process. I replaced my gimbal flex and video cables and found it extremely fiddly. Unfortunately when I finally got it all back together the DJI app says ‘camera sensor error’, and I get no movement or video feed from the drone. Not sure if I need to replace the lens or the circuit board the gimbal is attached to. Or maybe the connectors weren’t attached well enough. Any tips would be greatly appreciated. All the best.
Same Problem
thx for your video. Its good but out of focus
Yea quite a tricky one to film.