DIY 5 Gallon Pail Mosquito Trap Build
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- This is the build video for our homemade mosquito trap. Thanks!
LOTS of requests to see if the trap works - check that out here: • DIY 5 Gallon Pail Mosq...
We'd like to formally apologize for the audio/sound leveling. When we decided to share this project with the world we had little experience, everyone starts somewhere :)
Thank you for all the input!
Music: Beach
Musician: Jef
Music: Walk
Musician: @iksonmusic
Please consider subscribing!
Thank you!
Electrician here: I would like to introduce a small but very important detail to the lamp socket wiring. The lamp cord will have a narrow blade and a wide blade on its plug. The wide one is connected to the neutral, and the narrow blade to the hot, of the receptacle (if it is wired correctly), and is called a polarized plug. If you examine the lamp cord, it is composed of two wires running parallel and connected by a rubber or plastic section of the insulation. It will usually have small ridges or stripes on the side with the wide blade that is the neutral wire. This MUST be connected to the shell of the lamp socket (The part with the screw threads for the lamp), and the smooth side that is connected to the narrow blade which is the hot wire MUST be connected to the center contact in the middle of the lamp socket. This ensures that the section of the lamp socket most likely to come into contact with a human is connected to the neutral wire instead of the hot wire.
Would it be alright to cut the fan wire short, and connect it in parallel with the light socket terminals? This way, only one plug would be needed and also the voltage wouldn't drop across the circuit.
@@cilismoniker7322 Absolutely. This would be the correct way to wire the system.
One more thing, please. If an outdoor fixture lacks a ground it should generally have a fuse, right? Ballpark a 3 or 3.5 amp fuse I should add in-line for safety? The fan itself is 120v with a 2.5 amp fuse. I'm assuming the fan already has the 25% over minimum amp built into that 2.5 amp AGC fuse. For a ceiling light, 60w/120v for .5 amp, with that 25% extra = .625 amp. Total 3.1a. So 3a/3.5a fuse? Thanks!
@@cilismoniker7322 woah you guys must be pro electricians, im thinking of becominng one but i dont know the difference between an electrician and electrical engineer, which is harder to be? also talking about electricity stuff, looks very complicated, how many years of study did you have to take, also what type of jobs do you have to do as an electrician?
Toluca Mexico . An Electrical engineer is a person who went through many years of study at a university and is likely to find a job, or not, in a company, spending most of his days in an office and probably earn a little more than an electrician who will only require a government permit to join a professional electrician for many hours, pass a simple exam and be on its way to wire homes and make a ton of money if acting a bit intelligent. Clearly if your goal is to find an earning career go electrician, if you are passionate about science and physics and headaches go in electrical engineering . It's that simple.
I never leave comments but I had to say for someone who says he's uncomfortable in front of the camera you are excellent at tutorials. The instructions were clear, the pace was perfect, and of course the content was A+. Keep putting it out there!
Thanks Marcie , you said all I would have tried to say but way better than I could. Now I just like your comment and he gets the point .
@@TheChristonlineHe has an engaging personality & everything about his presentation was on point. Very clear instructions, complete demo of each step & the flow was as seamless as a professional production.
@@dnllmaurer1 yup
ByDingos - That was relatively my comment as well.
That latch you made out of the handle is one of the most ingenious things I've seen on YT.
Outstanding. Man, he is filming this without commercial in between. You have my respect.
The sharpie with arrows and measurements is so helpful visually. I would have loved you as a shop teacher in high school!!!
Thank you for not using any loud annoying music, very good idea here. I'll give it a try.
I would have preferred no music to what he selected.
It was both loud AND annoying. Did we watch different videos?
I built me one, using your directions and am amazed how good it works. We find 5 gal buckets on the roadside over and over. I cut the fan wire and wired it through the extra terminals of the light and used the left over cord for the unit. Now only one cord. Very good. Gonna make a couple more for my friends.
Makem and sellem ☀️😎
I was wondering why waist the money on a cord only to throw away the fan cord? Also leaves just one cord to plug in.
Cecil, How well has it worked at catching mosquitoes? I was not able to find a Black Light bulb, not even an LED type. I used a 20w incandescent bulb which I used a black marker to "paint" so there is less white light, not wanting to attract other insects. Have gotten some small black flies and a couple mosquitoes but not many. Maybe it is the wind that is keeping them out of it.
@@alanesterline2310 amazon has them
I almost never leave a comment. But your instructions are so clear and I love how others have commented on the wiring. The only thing I would add is spray painting the buckets somewhere in this process will extend the life of the plastic.
So true! Buckets do biodegrade! Thanks!
I built this 2 years ago to hang in the woods under my treehouse next to a bug zapper. It has run 24/7 and only stopped to clean out the mesh. I live near the coast in Mississippi, and I rarely ever see a single bug of any kind in the acre of woods around the treehouse. It works fantastic. Thanks for the video. P.S. No bugs means no spiders. :)
You are the best teacher i have ever seen,precise,easy to understand, and no bull or exessive talking.Congratulations
Suggestion: wrap the screen around the outside, make one cut where it overlaps, place the single fitted piece on the inside, and glue it.
Agreed
Placing it inside looks a lot neater!
@@belindafalgout1675 He did already have it on the inside, just in 3 separately cut and glued sections. This way is simpler and quicker.
@@belindafalgout1675 He said put it on the inside. What he was saying is only make one cut. There is no reason to make 3 separate sections when one would do the trick.
I complained about that when I was watching...lol
Thankyou, Thankyou, Thankyou!!!! I made one and it is slaughtering bugs! Put water & dawn in the bottom like someone suggested drowns them quickly. Making another for my son.
Is it slaughtering the good bugs? Not all bugs are bad. Is it slaughtering mosquitoes? I'm sure it is, but not many. My bet is that you still have a mosquito problem.
Hey buddy, don't feel awkward helping people. Nothing but love and respect for you and your family and animals from Brookfield Connecticut!!!
Nice idea that I would change a couple things on it. Safety wise make sure that your neutral and hot wires are placed correctly. Neutral goes to silver terminal and hot/line wire hooks up to brass colored terminal. Neutral wire on the extension cord has little rib/s on it the hot has smooth surface. The neutral terminal on the cord is the wider one. Might seem overkill but there is a possibility of exposure to the hot terminal on your bulb. You could also just take the insulation off a section on both wires without cutting them and just wrap them around the light terminals then you would be able to use the plug to power the fan.
We used a lamp base with an attached 3 prong outlet so doing away with an extra cable to plugin. Just cut the fan cable to about 7" long and attach a plug. The bulb we used was a Sunlite 80114-SU LED A19 Black Light Bulb 365nm Wavelength. attracts them like the plague!. Been out about an hour and its working fantastic. Way better than those $150+ over priced Dyno traps.
As for those who say UV light doesn't do anything, i beg to differ! Plus no use of smelly lure, just a fan and a UV light works.
Out of curiosity I just used a standard light bulb, and all that attracted and trapped were mostly moths and flying beetles. Switch to UV and the results were fantastic at trapping mosquitoes.
Some improvements can be made. 5 gallon buckets are made of hdpe (high density poly ethylene) same kind of plastic as milk jugs which does not like to hold glues very well. Because you used aluminum mesh instead of using glue I would suggest using a soldering iron or wood burner and melting the mesh into the bucket. Using hot glue works but it won’t really last if it gets moved around or bumped a lot.
Thanks for the great idea. I'm waiting for the 55 Gal drum version.
Also, I would slit and peel back the fan cord and join it to the light so I'd only have one cord coming out.
that handle latch system is something i'm gonna use for a swamp cooler build! very clean and clever!
You can run the fan plug up the inside of one of the pillars, cut it to length and wire it directly into the lamp. Hot to hot, neutral to neutral and then you only have one plug to worry about.
The greatest feeling in the world is getting an unexpected gift from your child. My bedroom is filled with their art and I love them all.
Nice work Brother you’re making your Daughter proud of you. God Bless you and your Family. ❤️🖖🏼🇺🇸
I would love to see the trap in action , like use it for a week or month and show the cleaning out of it and how many mosquitos got trapped and are dead.
Yeah, not much of an ending...
th-cam.com/video/LZYSPFPd4Ss/w-d-xo.html
Mosquittos aren't attracted to light, as im sure they realized after. @michaeltesla558
why cut 3 screens for windows vs just line entire inside with 1 cylinder of mesh
I finished building this just before dark. It's hanging on my porch and seems to be working great!
Love the animal introductions, great! Appreciate the blanket info and extra effort. Great video thank you.
That is a very nice and clean mosquito trap-build! Now, if you make 10,000 and sell them for $75/each, you will be in the money!
Brilliant...on moving to the US from the UK some time back, one thing you guys have are lots of mosquitoes. Thank you for the idea, top marks 👍🇺🇸🏴
I made it. 40 mosquitos in the first night just using a generic 75w LED lightbulb. Having to wait for a BLB to arrive in the mail. I added a glass quick blow safety fuse on the live wire so if the motor ever grinds to a halt on the fan, it wont catch the extension cord on fire. In-line holders and the fuses themselves are easily had on amazon. Just be sure to get 125v(120v) or 240v(245v) fuses and not the automotive 12v rated ones. 3.15a fuse for fan+light. Likewise, the fan and light are wired in parallel. Lastly, google green-light and mosquito. Turns out that some wavelength of green light is as effective as UV at drawing mosquitos if not more effective. Gonna give green-light a try whenever the BLB burns out.
Be careful about the heat of the bulb melting the plastic of the bucket.
So update. Green light is not more effective. The study concerning them was fairly old and they messed up. Their emitting light was one of those old arc lights that also emit a ton of UVC, B and A. It just so happened the green photo filter did the least absorbing of the UV light the lamp was also emitting. I tried a BLB and 365nm-only black light. The 365nm did catch more than the generic white bulb. It also caught almost exclusively mosquitos with few moths and no lightning bugs. The BLB bulb did technically catch more mosquitos, but it also caught basically everything else. Black flies, moths, mosquitos, preying mantis and june bugs. If you want to be kind to moths, I guess the 365nm bulb is the better choice. If you hate all flying insects, BLB it is.
I've never seen so much care and precision and time put into a mosquito trap!
Get bitten enough and very tired of having to buy spendy & hazardous bug sprays & other bug deterrent products only to find out they sold out!!!! It's McGuver time!!😊
Excellent DIY build. I followed your instructions and built one myself. I saw your other video with all the captured mosquitoes and insects from one night of running. I changed a couple things, like the light fixture and went with a very fine fiberglass screen, as I have noseeums and mosquitoes here in FL. I'll test it out tonight , but I'm very sure this is going to work just how you proved it could.
How did it work out?
@@gritchard no complaints, must mean it worked, 😂
Awesome. The latch is a touch of genius. Great video.
Excellent project. Gotta balance the audio between voice and music. It's touch to watch at might when it shifts from voice to audio, without waking the kids.
Great video! Monday morning QB here... Seems like over time the fan blade and motor will take a beating. (Including build-up of bugs sucked into the motor.) It struck me that because of the modularity that you built into the design the middle section could theoretically be moved to the bottom, sucking the bugs in instead of blowing them through the fan. The new middle bucket, the trap bucket would only need the bottom cut and screened; no need for windows on the sides. You'd want 100% of the fan suction transferred up to the lamp; you wouldn't want to suck air through the sides. Just a thought.
Either you have been doing this for a while and have developed a comfortability in front of the camera, or you are being overly modest. This was probably the most thorough and easy to follow DIY I have ever seen in my life! This is coming from someone who watches A LOT of DIY stuff. I immediately subscribed!
When making your extension cord connection to the lamp base, it’s important to ensure that the correct polarity is maintained, i. e., phase connects to the center lamp socket terminal and neutral to the outer ring. Incorrect phasing for incandescent lamp connection will not affect operation but can affect product safety.
What difference there is if you can plug it to wall socket both sides.
Thank you for being so concise regards to explaining things without being a blabbermouth
Great project. I live near a swampy area and the mosquitos are terrible. Your a great instructor did great with this video. Liked and saved and subscribed
Great idea, great tutorial, great big heart with your attention to your family and pets, and last but not least, great barber!
A couple of tips regarding the lamp base. When you cut and strip your cord, pay attention to the two wires after you split them -- one will have a groove texture along its entire length. This usually indicates the neutral wire. The plug blade that flares out (the wider one) is also the neutral -- so you can make sure you've identified the right wire. You ALWAYS want to connect the neutral wire to the silver screw and never to the brass one. The silver screw connects to the threaded part of the lamp base. If you get this wrong, then the exposed metal of the bulb will be live as you're screwing or unscrewing it and you might get a bit of a surprise.
Also, when using stranded wire with screw terminals like those on the base, if you twist the strands backwards (counter-clockwise) after you strip them, and then wrap the wire clockwise around the screw (as normal), the strands will not fray when you tighten the screw.
@swp466
Most excellently said! People get so excited that they accomplished something, they NEVER remember the details! Case in point the scenario you gave, with the right combo of conditions, which are easily met, that can be DEADLY!
Nice build. The only modification that I would make is to cut the plug end off of the fan, and use the lamp base as a junction box. That way you would only have one cord to plug in.
Really enjoyed watching this video and thank you for posting it ! We don't have many mosquitoes at my home in West Virginia but I am going to make one just because I like to make things. Thanks again, you are also an excellent communicator ~ I would think that you are a teacher.
Mosquitoes don't always need CO2 to get them attracted. They are also attracted to black and white patterns, heat (between 95 and 101F), sweat, cologne/perfume, lactic acid (found in urine).
I created my own mosquito catcher using old socks which I worn for working out (multiple times), then I sprayed them with my cologne, and urinated on the socks. Then I let them dry.
Inside my mosquito catcher, I created a section where I put the socks. The mosquitoes go in through an opening where I have the light bulb (I used a smaller bulb than the one in the above video.
When they go in to the opening, they never make it to the socks. There is a fan which sucks them in and pushes them through a trapper. They never get to leave and dry out in the lower section.
Another thing I learned is that mosquitoes have a difficult time travelling in a straight line. They tend to zig zag. So I place the trap down on the ground, sideways, so that I can catch more of them. The openings are smaller, this also increases the suction power of the fan. If you have too big of an opening, you lose the efficiency of the fan.
I also didn't use screws to attach anything. I sealed it all with epoxy. I didn't want any leakage from water on to the electrical.
Inspiring, clear, and informative enough. We've got our new weekend project!
I am soooo gonna build this. Every freaking night at 6 pm is the witching hour here. I'm outside trying to work on my car while simultaneously keeping an eye out for skeeters. Here, they are fast and nearly invisible. Often, you barely feel the bite. They bite me. I kill them. We are about 50/50 right now. I was winning, but one of them brought me back to even the other night. He bit the crap out of me, leaving multiple big, red welts that itched for days. I need an edge. We'll see how he likes my new trap. #cackles maniacally#
Awesome build! You replicated a 300 mosquito trap.
A few of thoughts. You could you tie the fan cord into the light fixture. That we be easy and one less cord to plug in. Will water get to your fan motor? Maybe cut the bottom of a sour cream container and cover the speed selection and motor. It could be wired to the cage. Lastly, the side screen could be left in one long piece and glued into place.
To make the sides one piece, you'd have to cut it like a rainbow, with less of a curve, because the bucket is tapered.
The Black light attracts mesquitos. Below that is a fan spinning down and this creates a suction that pulls the mesquitos into the fan killing them with the blades, right?
Phenomenal job with the video!!!
Mosquitoes are not killed with the blades but actually they are dried out by air and gets dehydrated and dies.
You can improve it's effectiveness with bait. Thankfully, bait is easy to make. You want to produce lactic acid and you want to produce Co2. In order to do this, just make watery flour with yeast added to it and place it nearby the trap. This'll produce Co2. The lactic acid can be made from a combination of live yogurt and milk. The SciShow youtube channel has a piece about studies done on what attracts mosquitos. Funny enough, the color of the buckets themselves has an impact. Black traps will attract 5 times as many mosquitos as white or yellow traps. Red and blue are also good options, but orange is not. I guess that you could also make a Co2 bait out of a bottle of wine, 1 tbps peroxide to neutralize the sulfates, dilute the wine with water and add apple cider vinegar mother to the mixture. The apple cider vinegar mother will convert the wine to vinegar, and release Co2 in the process.
Proper bait placement is important with this design. If it's in the lower part, the c02 will be blown away from the entrance of the fan. It will bring mosquitos to the area, but not all will make it inside, as they are not primarily attracted to light
Best short way to say it! Other people have to add the history and chemistry to CO2.
The Black paint trick is the first to be forgotten?
@@TheLawCoyoteTLC where would you put it?
its effectiveness. Its Its Its
This is the piece he was missing and I was waiting for. You have to bait in the mosquitos, they don't really care about the black light.
Great instructional video. Just STOP saying "Go Ahead"
Very enjoyable and informative! You seem like a great camera person and, just a protip, keep showing the animals. People LOVE to get to know the animals :) I love how precise the instructions were and also you didn't fall into the trap so many other video makers fall into which is using all the specialized tools in some super equipped workshop in the crafting. I know I don't have a lathe, CNC machine, or many other expensive tools so the drill+jigsaw was great to see.
You're brilliant....and if you have little critters interrupting you....then you must be a pretty great guy.
Great video, great idea and well done.
I gave a thumbs up when i saw the signs your girl made... 3 seconds in i was sold
So as I was planning on making this, I was wondering why not to use LEDs. Well doing some quick research I found out there are 2 main types of mosquitoes, day and night. It depends when they are active. Night mosquitoes are repelled by UV or blue light. Day mosquitoes are attracted to different colors of light depending on species. In my area I'm sure I have night mosquitoes, which are active at sunset. Since I have 1 gallon bucket, I'm going to make some test version to find out which color works best. Most research papers, about LED vs incandescent light states LEDs are more effective. Just need to find the right color for what you want to trap. Can also make a trap for both that would switch's which light is on during the day and at night.
from what i could find, green LEDs work best, like almost 2x better than the next closest, which was blue
You need to make sure neutral attaches to round socket liner. Otherwise you will have an exposed hot .
A nice simple build solution that anyone can do. I would love it if someone actually built this contraption and says it works, before actually engaging in this DIY project.
Thank you for sharing this amazing project. Plus the animals and pets story. Keep up the good work.
Yeah, it's good idea to get the polarity right when wiring the lamp.
I'd also suggest hooking up the fan in parallel with the light so that you have only one plug to plug in.
And also cutting out one continuous piece of screen to completely cover the side of the bucket.
Awesome DIY, love the care and precision you put into building this, thanks!
Is it rain proof, and how has it worked so far?
Excellent and ingenious design and video on how to build it. I particularly liked your closing comments. Pls keep doing these!
Excellent instruction to your construction!
You teach like a pro. I’ve subscribed. Looking forward to more.
This is not his first Rodeo in Making these Vids. This I like. Keep up the good work
Wow dude, if you thought of that all on your own I am impressed. I know you got the idea from preexisting mosquito traps that are similar but the creative choice and assembly of the various materials was ingenious. Great job and thanks for the content.
I’m glad you start your channel. I miss the king of random Grant Thompson. That channel used to film lots of useful projects. Then the kids took over and destroyed the channel.
Hi just a tip when wiring a lamp use the underwrighters lab knot. It prevents the short if some one knock over any unit .
Mosquitoes hunt two ways, long range (smelling CO2) and short range (infrared aka heat). Think of it like us smelling something good, following the scent then spotting it. Mosquitoes smell CO2, follow it, the spot the heat when they get close.
Light does also attract mosquitoes, in fact some research shows green light to be the most effective.
This trap has the light and heat elements and you could go to your local welding supplier and pick up a bottle of CO2, slam a regulator on it and run the hose to the top of the trap.
Use Octenol as well. Replace about every 2 weeks during the heavy season. I keep the old one in there too.
You just put it in the bottom on the bucket?
Good job. I have one of these. The exact same design, just about half the size. Bought it at Costco, on sale for $60. Only took 15 minutes to hang it on my porch. Catches a lot of flying bugs. I'm going to make one like yours and hang in the back yard on the outside shop wall.
Nice build. My only problem is the speaking volume is lower relative to the transition music volume so I constantly had to adjust the volume control to maintain a comfortable listening level.
I thought your presentation was great. It was very informative , light and professional. You could very easily make it into a profession. Good luck you have enjoyable videos with good ideas. Thanks For your time Gary
27 minutes video. You could have pushed 3 more minutes and show it in action.
th-cam.com/video/LZYSPFPd4Ss/w-d-xo.html
or could have made this simple task a 3 minute video
@@skinfusionz or you could stfu and make your own 3 minute video if you are so anal retentive about it
@@lordjaashin That made me laugh
Because it didn't work.
Pretty damn cool DIY project! Would've also loved it if you also showed it in the wild and its efficacy.
Can you do a follow up of how many mosquitoes you caught?
Exactly. He built a mosquito trap, but won't demonstrate if it even works.
I'm guessing mostly moth's a maybe a few errant mosquitos found their way in there. I had a bug zapper that required you to add a small container of some gel that supposedly attracted mosquitos because mosquitos were not attracted to the blue light of the zapper.
@@Packer1290 th-cam.com/video/LZYSPFPd4Ss/w-d-xo.html
just what I been looking for. I would add a 5 Gallon Paint Strainer with Elastic Top to the bottom for easy clean up.
Great idea and your other video showing how well it works it great also but one suggestion, write down all of the measurements and directions and include them in the description because while yes I think your video is great, I don't want to have to watch it eleventy billion times to build this and I don't want to run the risk of TH-cam pulling it for whatever reason.
Great idea. I did watch eleventy billion and then some to complete mine. Measuring took the longest.
Dude … you are amazing. Skillz above & beyond. Love watching you
Not a mosquito trap - it's a flying insect trap. Mosquitos are not attracted to black light, but you may occasionally catch one that flies by.
Good job but plastic buckets don’t hold up, they eventually get brittle and turn into crunchy little pieces. Also how do we know the thing works? And how good does it work? You didn’t demo it.
I was thinking the same thing. For mosquitoes you would need to put a pan of water in the bottom and drop in dry ice.
Mosquitoes are attracted to heat and scents so perhaps they could work well properly baited.
@@ReidWhitsettLLR CO2 and scents
this is the best build video i have seen ikea should hire you to make videos for assembling their products
Great video. Very informative. I'm gonna try it out. Sidenote, your background music keeps blasting everyone every time there's no audio. Not sure why that is. Very strange.
I'm liking this project so far, but as an electrician I would like to point out that you did not polarize the electric cord. It is possible that you crossed hot and neutral. Either use a meter or feel the edge of the cord--one side will have "ridges" on it to mark that side. Keep it straight, keep it clean.
I liked how you turned up the music and fast forward parts.
Well done!
I specifically disagree. I wish more creators would assure volumes would stay at similar levels so we don't have to constantly adjust. Especially if I have to turn up the volume just to hear the presenter.
Brilliant man. Funny, direct and easy to follow. Humorous and charismatic are truly a winning combination, great job man.
That's awesome! What do you think about wiring the fan into the lamp base so you only have one cord to plug in?
Yeah I came to the comments to say just this. Your lamp has a 2nd screw, just cut the plug on the end of the fan and wire to the lamp so you only need to use 1 plug instead of 2 in your outlet.
You can also use a lamp base that comes w an outlet or use a socket adapter w an outlet. However when I built this, I secured the lamp base to the fan, so that the bulb comes up instead of hangs down. It was easier for me to use tie wraps to secure the base to the fan motor casing and allowed me to have an open top for more air intake and light exposure. I can always just put the bucket lid back on if looks like it may rain.
@@dtruque is it harder to clean in that config?
@@sleevelessinsiam1285 In both cases you have to move the fan casing to clean it, so I don't think it makes much of a difference. On retrospect, I think the lightbulb hanging upside down towards the casing may be slightly more effective because it lures the mosquitoes to hang out closer to the casing, where they get sucked in. In my design, since they hang out at the top of the bulb (and the base of the bulb is on to the casing), then there's less suction where they are.
Up here there aren't many mosquitoes until the summer, so in a couple months I'll finally put it to the test!
@@TheNikitis you can buy pullchain light that has recpt build in. or cut off fan plug and wire into keyless.
This is the best way that you make the pail useful again, also it can be refitted as a pond filter.👍
Great video. I wish the volume was consistent throughout. I had to keep muting when the music would spike.
Yeah those music spikes are really hard on the ears. One minute you can't hear what he's saying and the next your ears are bleeding.
Agreed. I just muted the audio altogether as soon as the annoyingly loud music started. The visual alone is sufficient.
Nice job explaining how to put this together!
what about roughting the power line for the fan up to the light so there is only one cable to plug in ?
Yup, and while doing that, make sure the polarity for everything is right. you want to make sure the nuetral is what is exposed, but it would make this a much cleaner 1 cable system
@@ilovefunnyamv2nd Thank you both for saving me the typing time! Why WOULDN'T you wire the fan there?!?!
I enjoyed the video very much. Great idea and easy to follow instructions. One thing I need to nitpick is that the machine screws aren't 8/32" they're 8-32 meaning the screw is a #8(5/32") with 32 threads per inch. I know it's insignificant in the big picture and really not worth mentioning, but I work in a hardware store and it's one of those slip ups that make me cringe a little.
Can you please show us the results you are getting from the mosquito trap, give us an update on the project..Thank you!!
In addition to the comments regarding polarity of your lamp cord, another suggestion I would add, again, paying attention to the polarity, wire the fan to the lamp base, perhaps fixing the cord to the bucket sections with hot glue.
I wonder y u didn't just simply cut one long continuous piece of mesh, the exact length of the inner circumference of the bucket, and just secure the whole length inside the bucket, rather than taking the trouble and extra work to cut separate pieces. It doesn't appear to b necessary to cut the mesh into 3 separate pieces.
Good project. But aside from having to constantly adjust the volume from the lower vocals to louder music. Just a thought, constant audio levels are much more pleasant.
Well done.. thanks for sharing this.. Qs. Do you think a regular temperature bulb will attract the mosquitoes as much as the incandescent uv bulb you used?
I love it I am definertly building one but just an idea I would connect the fan to the light so there's only one plug .awesome job thanks for sharing
The most important part you left out, showing how effective it is at the end if say a week with dead bugs.
Found the other video that showed that after i posted this. It does work effectively
I don't know what your day job is, BUT you need to quit it yesterday!!
This was without a doubt the most well presented video I have seen in a long time!
Can you show us one nights haul of mosquitoes ?
My cousin built one and made me a believer. We live in skeeterville and they got about an inch deep of mosquitos in the bottom of the bucket in one night.
Yes. I would love to see the results of this.
This is the DIY build guide; if you go to this user's uploaded videos, he shows how many he caught in one night.
@@fxnepilogue chicken food or fish food? Both!
Nice device! It would be a good follow-up to see one filled with angry mosquitos!
Could’ve left the bottom in the bucket & filled that part w water & a teaspoon of oil to remove the surface tension of the water so the bugs drown.
Not oil. Dish soap
@@marcs3982 Dawn would make sure they die "grease free" and squeaky-clean. lol
Using water & dish soap will evaporate. Better to use any type of oil & will last longer.
That latch is genius and if you've got a mosquito problem that requires the use of a 55 gallon drum, it's time to move!
Instead of screen on the bottom, leave the bottom of the bucket whole and add water with soap. Mosquitos will drown, no chance of escape.
What's to keep them from flying right back out as soon as it's unplugged? With soap and water, they can check in, but their not going to check out. Plus, it would be easier and cheaper to build.
@@david0858too you need the screen to allow the airflow. otherwise the fan would blow the mosquitoes AWAY from the bucket...
@@orooneytoones I think the screen around the sides allows enough air flow, if the air flow is far enough away from the inlet so as not to push attracted mosquitos away from the inlet. The Water/soap is a nice idea but I also would not want to spill "mosquito-jam" on myself while taking it down and emptying it... and I think you leave it on for long periods of time and the force pressing the skeeters against the screen is probably enough to do them in... any expert replies on this?
@@landservicesandmore8691 I suspect that the mosquitoes are also going to be smacked by the fan blade as they get sucked through. ;)
It would be very easy to incorporate an electrocution circuit such as in a traditional "Bug Zapper" inside the screened area to actually kill the little bastards which will escape the minute it loses power (or you turn it off). Having them trapped is one thing, keeping them trapped is another. You could disassemble a commercially available (residential) Zapper and fit the killer unit, no problem. This takes you from a "trap" to a fan-forced, electrocution station. Then, if you want to get to the level of the several hundred dollar units, design a CO2 producing element which further attracts mosquitoes. People don't have black lights stuck in their noses but, we do produce CO2, which is how they find us and how the military and expensive civilian units work.
For about $100 you can have a unit that would cost $350 to buy. A couple of those would cover quite a large area. Good stuff!!
Fantastic idea and project! Really did a good job of presenting the tutorial. I do have one question. The fan has low, medium and high speed selections. Which speed do you find to work the best and not over work the fan motor? Should it be able to run high speed constantly?
Mosquitoes are slow. I use a similar fan on low to keep them off of me while I sleep; low should be perfect in this device.