[388] $59 Genuine Lishi vs $120 Original Lishi | Is The Cheaper One Worth It?
ฝัง
- เผยแพร่เมื่อ 6 พ.ค. 2020
- Comparing the Cheaper "Genuine" Lishi to the "Original" Lishi
Link To Subscribe➜ th-cam.com/users/helpfullock...
The residential Lishi tools in the Kwikset (KW1 and KW5) and Schlage (SC1 and SC4) are extremely powerful tools in the right hands. They are 2-in-1 pick and decoders. They can help the inexperienced picker make short work of Kwikset and Schlage locks. With these tools you can precisely pick the residential lock and then decode the keypins which will allow you to make the key. Being able to do this is both exciting and concerning at the same time.
Prior to this, the original creator of the tool “Original Lishi” was your only option at the high cost of $120 and you needed to show you were a locksmith to purchase it. Now, anyone can purchase the knockoff tool for less money (these were listed for $59). Lets check out first-hand how these tools look right out of the box and see if they are able to perform to the same standard as the $120 tool!
You Can Get Started With Your Lock Sport Journey On Amazon!
Get Started With Your Own Clear: Padlock, Dimple Lock, and Disc Detainer Lock! www.banggood.com/custlink/GKK...
Check Out My Progressive Lock List For An Easier Progression Towards More Difficult Locks.
1. Clear Acrylic Padlock: amzn.to/3qYGZ1z
2. Master Lock No 3: amzn.to/2IPvhV1
3. Master Lock 140: amzn.to/2LiKpbB
4. Brinks 40 mm Padlock: amzn.to/2LcjJcJ
5. Master Lock 570: amzn.to/2LiTQba
6. Master Lock 911: amzn.to/2KIXtpU
7. Commando Padlock: amzn.to/2rWx14W
8. American Lock 1100 Series: amzn.to/2rYGJ6g
9. Master Lock 410 LOTO: amzn.to/2KH0TsW
10. Abus Titalium 80TI/50: amzn.to/2LeI2qm
Check Out One Of The Best Cheap Generic Lock Pick Sets Sold At Banggood.com: www.banggood.com/custlink/Gm3...
Check Out A Beginner Dimple Lock Pick Set On GearBest.com www.gearbest.com/lock-picks-a...
Check Out The Panavise 350 On Amazon: amzn.to/2rV7OYI
It Is One Of The Best / Most Used Vises For Lock Sport!
If You Would Like To Check Out All The Equipment I Used To Film This Video You Can Easily Find It All On Amazon!
⭢ Canon EOS 90D: amzn.to/2DHcQh7
⭢ Sigma 18-35mm F1.8 amzn.to/2Pp166p
⭢ YoTilon 360°Horizontal Tripod: amzn.to/2S3rEMu
⭢ JOBY GorillaPod Cameras 3K (6.6lbs): amzn.to/2kdpOcB
⭢ AmazonBasics 60-Inch Lightweight Tripod: amzn.to/2Iy9H7X
⭢ Takstar SGC-598: amzn.to/2rYIbWg
⭢ Rode VideoMicPro+: amzn.to/2KxqFRO
⭢ BOYA BY-M1 3.5mm Electret Condenser Microphone: amzn.to/2x0T8MC
⭢ Fifine Metal Condenser Recording Microphone USB: amzn.to/2s4Y0e7
⭢ Bonlux 40w 5,500 Kelvin LED Bulbs: amzn.to/2mGyzNv
⭢ Neewer 176 Dimmable LED Pannel: amzn.to/2S0DB5q
DISCLAIMER: This video and description contains Amazon Affiliate links, which means that if you
click on one of the product links, my channel will receive a small commission at no extra cost to you.
Thank You For All Of The Continued Support By Subscribing, Liking, Sharing, Clicking The Bell!
If you enjoy my content and would like to help support my channel, please consider checking out: www.paypal.me/HelpfulLockPicker
Your fan-funded support will go directly to helping improve the quality of my content. Giving back to the lock sport community is at the heart of my channel, your support will directly help increase the frequency and value of my giveaways. If you would like to contribute items to my giveaways please contact me via email at: Contact.HelpfulLockPicker@gmail.com
Thank You For Again For All Of The Support!
Thank you for checking out this video! If you have any questions or suggestions please leave them in in the comments below.
If you liked this video and you would like to see more like it, please subscribe, and as always I hope you have a great day!
#Lishi #LockPicking #LockSport
They are both original/genuine tools. If you read up on the history of Lishi, you would find out that UAP created the first Lishi tools in collaboration with Mr. Li. They had a falling out and they split, but due to contracts UAP can use the Lishi name. So one way to distinguish them was "Original" that you see state side, and "Genuine" that you see in Europe. Both are same quality, only difference is finish.
Thanks for sharing
Love to know what the "falling out" was about.
@@pepelemoko01 my lock is bigger than yours? maybe
@@raymondpoh The older brother picked a fight with the younger.
Yeti
Good god man, you really said yes to that music? 😂
Man U just answered a question I haven’t heard from anyone else if the tension arm could be reversed. Thanks a bunch. No clue why others haven’t mentioned that also
I'm happy to help 😊
This is a great comparison. I think a lot of people have been wondering if the cheaper picks are good enough. I've read some opinions on the subject but this is the first real comparison I've seen. Well done.
Thanks for checking it out and I'm glad it helped :)
This is not a real comparison he is working on a practice lock which he probably already knows the pin code to. I want to see these things on a real lock.
@@youngkeazy2806 elas definitivamente funcionam sim,talvez voce não tenha nenhuma para poder entendê-la e praticar o uso dessa excelente ferramenta,são efetivas praticas e muito funcionais,são de otima qualidade,portabilidade e te permite demonstrar uma qualidade muitas vezes acima dos padrões profissionais de serralheiros comum,você evitara frustrar seus clientes furando suas fechaduras,e não precisara sair com muitos ganjos,acinhos e tensores de escolha variável so vai pegar um bom conjunto de lishi e sair fazendo grana 🤑
Wow! As MANY others have stated- thank you so much for the 1 to 1 comparison. I've been interested in getting a few of these but couldn't justify the price per unit. However, was worried about "knock off" given obvious reasons. Truly helpful my friend! Definitely subscribed.
Thanks for checking it out
Cheaper ones are fine. Lishi which means Mr. Lee in Chinese, he invented the tools off of German picks. German picks did not have the depth and spaces so Mr. Lee incorporated into the tool so that it's much easier to pick since you don't have to guess around, like converting violin into guitar if that makes easier to understand. At the early stage of tool developing, the English distribution company filed patent for the tool since Mr.Lee was not familiar with the patent process. So it became a big thing about the rights to produce the tools between Mr. Lee and them. So the English company came up with the name Genuine Lishi vs Lishi tool. At early stage locksmith tool distributors sold Genuine Lishi more than Lishi Tools not knowing the background story but lately most of them are carrying Lishi tools so I guess they sided with Mr. Lee than Genuine Lishi. I bought both of them at the beginning and both were pretty much identical in quality so if you buy Genuine Lishi products you should be fine. The plastic casings are actually the idea of Genuine lIshi because Lishi tools shipped out a case at the beginning. Don't know how they sorted out the patent issue but the quality again should be the same. My 2 cents.
Thanks for sharing some more background info!
I have a sc4 sc1 kw5 and kw1 in my collection so far. Covers almost every residential door I see. I want a masterlock one. Even tho I can hand pick them well. It's just a cool toy
The master lock one is awful in my opinion
Well done. I’d be interested to see some dimensional comparisons with a micrometer or caliper.
I don't think I will get that technical but that would be interesting
Thanks for the review, it's nice to know we have another choice now.
thanks for checking it out!
Hola
Disponible
Great. I already have an AM5 of the cheaper sort on order. Glad to know it's likely to work. Couldn't have justified $120...would have just gone without.
Thanks for sharing
Same!
Best video ever. Very informative!
Thanks for checking it out! I still rather give support to get the original Lishi because I would rather support the guy who designs them.
Both work great and are awesome tools to have :)
I really wanted a Lishi SC1, but couldn’t bring myself to pay $99 (cheapest I saw them). I thought, “there must be an inexpensive copy, but where”???
Then, I saw this. Thank you so much! Got a Genuine on the way, coming Wednesday!
Thanks for checking it out!
How's the Genuine Lishi treating you?
I have had lishi's not fit perfectly in key ways. Got a little overboard with the sc4 tried it on pne with various spring tension, when it got to #5, pick got stuck and now learning how to replace the pick on the sc4. Found a video on repairing a kwikset version, hope I do well
Thanks for sharing!
This video has answered part of my previous question
I wish you luck on your quest to find the right one :-)
Cool savings !!
Looks pretty good!!!!
Thank you for sharing this!!!
Stay safe my friend!!
🐈👍🐈🐾😷
Thanks! so far I'm pretty happy what time :-) say hi to Suki for me
HelpfulLockPicker the cats say Hi 🐈🐾👍😷
thank you for this, very well made video
Glad you enjoyed it!
Which model on Amazon fits padlocks? thanks!
Which would you recommend getting for common door lock picking kw5, am5 or sc4? Newbie getting started with the picking hobby and would like an easier method than guessing with a regular pick lol
I would get KW1 and SC1
Regarding SC1 vs SC$ and KW1 vs KW5, I thought the same and wanted to get only SC4 but some 5 pin cylinders do not let SC4 tools to enter all the way so depth and space could be off you still can work around the issue but what made me to buy separate sc1 is the tension aspect. If you use SC4 tool in 5 pin cylinder then the 90 bump where the blade ends(shoulder) does not go into the cylinder and you are putting the tension on the much weaker blade instead of the shoulder. You still can pick the lock but you have to be very careful not to twist the blade.
Thank you for sharing your experience!
Thanks
Amazing as usual
thanks for checking it out
So, I'm here after looking up original lishi tools, and saw that key ways have a sort of "family tree" that stems from one basic shape. Do the clone lishis come in that one base shape for the different lock brands, or do you have to get all of the specific shapes? I'd like to just get the base shapes for the most used locks, because I've been wanting to start up an emergency locksmith business for a while now. But I don't have the funds for the expensive stuff right off the mark.
You need to get each individual lishi. They are great tools and a good investment
Hi sir !! Wich lishi tool can pick the WR5 lock please 🙏
They Seem to Work pretty good with some small differences, Great video My Friend
Thanks for checking it out Nico!
Awesome video!!
Thanks!
Nice comparison, HLP. It looks like a great alternative to Original.
Thanks for checking it out. It's nice because it's cheaper and available :-)
@@HelpfulLockPicker Absolutely! I was given one for the AM3, I think, for the 1100s...I couldn't make heads or tails of it. But I couldn't believe the price tag. A nice novelty for an SPP guy like myself, but I can see how this can be a big deal for others. Take care!
How have these held up inn comparison since this video was posted? Still of equal quality or has one deteriorated over time more than the other? Thanks !
Mine have held up well
Lol the expensive one was binding upon entry. Damn. Looks like the cheaper one was better. Glad I got those
Thanks for checking it out
Hey HLP, can you do a video on how to cut a key, using Lishi hand cutting tool?
if I had the tool I could try to do it but unfortunately I do not own one
that was some good info and its better then carrying around picks and tension tools .. I looked on there web site jezz I couldn't make heads or tails out it .. interesting stuff ..
Thanks for checking it out! I purchased mine on eBay if that helps
Thank you very much
Thank you for checking it out
When I picked mine up, I just got the SC4 and KW5. These will work fine for SC1 and KW1. Nice evaluation.
thanks for sharing
Are you saying the SC4 and KW5 can replace the 1s?
@むぎわら is there a risk to doing this? I heard you could damage a KW5 lishi if you use it on a 5 pin lock (KW1)
Great video, really well explained! I’m a first timer and live in the UK. What would be my best purchase to fit the most common house door lock? From what I’ve researched so far, I’m assuming the SC4? Or maybe that won’t work on most front doors? Any help would be greatly appreciated :)
Thank you for the video!
I am not sure what the UK uses. I would say look at your keys, friends, family and see what is most common. Once you know see what versions are available. Just make sure you only pick locks you own or ones you have permission to pick.
@@HelpfulLockPicker that’s great thank you!!! I will ask UK lock smiths as well! I work in the emergency services and we have to break a lot of doors down so was hoping to give this a whirl if it’s possible!
Thank you again for the speedy reply! :)
They sell a kit with common door locks. Kwikset and Schlage are the most common keyways. But honestly if you need to get into a house right now, breaking down the door is the way to go. Picking a lock isn't something that is going to work well under stress.
I ordered all my lishi tools from my Locksmith suppliers where I order all my keys like UHS hardware, clk supplies & American Supply and mine always come in a little bag with the lishi QR code on the back I never get a box
I still think £60 is quite expensive for one single pick, £120 is just ridiculous
Good video though
Thank you for checking it out. For a lock smith it is worth it
Great find my friend.
Thanks for checking it out! You may have not seen my live stream and I certainly don't expect you to have watched it but I wanted to share i had some good luck with an ebay seller regarding the brass round American locks. Long story short, free of charge he donated me one to give to Peter Lewis :)
@@HelpfulLockPicker I missed that one my friend.
Looks like the main of only differences is the clarity of the print on the pinning chart/numbers. And the real one seems to have more of that anti-glare finish that the descriptions all state
Thanks for checking it out 😀
Any Lishi model for older Volvo 240? Late 80's, Early 90's?
I guess that's a very big saving. Two for the price of one. Does the weight feel the same seeing as you said the material they are made of seems to be different?
From my limited exposure to it it feels comprable and worth it. One of the most overlooked things might be the fact that these are available and you don't need to show your some type of locksmith to get them. That alone almost makes it worth it
@@HelpfulLockPicker great video. I am seeing some on Ebay. Where do you recommend we buy them? Also are these also for residential locks? Everything I am seeing portrays these as for automotive. If you can use them also for residential, which models should I buy? Sorry for all the questions.
@@mjmckool I bought mine on eBay. Get the model for the keyway you want
@@HelpfulLockPicker how do you identify the key way type? Are there any multi purpose for kwikset and schlage?
At least on camera (as it appeared on my notebook screen) the real Lishi was far easier to read that the genuine "knock off"
I think it is a bit easier too but for the price its not a big deal. I wish my Kwikset clip was in better focus so you could have seen that better
@@HelpfulLockPicker this is definitely what I was thinking- I can work around that for $ difference. Not that it's not a a good catch. Thanks for pointing it out @Ken Nixon
Is there a Mr lishitool for decoding the Yale type locks?
I am hoping one will come but I believe there's some difficulty making it because of how paracentric the keyway is
Do you have the link to purchase the Geniune Lishi lockpicks?
I bought mine on eBay
I have a kw1 I got for 79.99 absolutely love it I have zero experience I got through my front door in 20 seconds
Thank you for sharing your experience. These are some fun tools
When decoding for key cutting, if the depth is "in between" (2) gauge numbers
(ie) The pin is reading between depth #4 and #3.
Do you use the top depth gauge number (4) for key cutting?
If unsure I would go with the lower number because you can always cut deeper
@@HelpfulLockPicker Thanks buddy
Match ! this comparison is what i wait since long time ,thanks for it -Q
Thanks for checking it out and I'm glad it helps!
I want to buy the LISHI tool for English lock exactly for LASSA, KALE, ABUS and like that from you or can you tell me please where can I buy it?
I do not think they make them. I would go on the Lishi website and look for distributors
great tool
Thank you for checking it out
Great video my friend question what ones would make a good starter set ????😎
It depends on how much you want to spend. I still prefer the original Lishi but both work well
@@HelpfulLockPicker how many different Lishi's would you say you need to open the largest variety of locks? Thanks,,?
@@randommadness1021 it depends if you are working on Automotive a residential. There are a lot of Automotive ones but not many residential
@@HelpfulLockPicker yeah, that why I was asking. I'm just a beginner and am still doing single pin picking (tried a couple of disc practice locks, got in them easy but didn't really enjoy them) and looked these up and realised that it's mainly for cars, so looking to see what's best for pin locks. Was going to buy the first one i came across (£39) and thought that was good but then looked a bit more and realised that it isn't a case of one size fits all...
Thanks mate.
I wanted to buy an KW and SC for fun. You said the SC4 and KW5 is the same as the SC1 and KW1 except it has an extra chamber? Or am I interpreting it wrong?
It has the extra chamber but I find it harder to use on 5 pins locks
Hi, I am in Australia and have a Lockwood LW5 / C4, which Lishi Tools suits this lock? Thanks
I believe I got the Kwikset one to fit into one of the lockwoods however you really only want to get the Lishi fir the lock you are working on
How much tension do you apply to the tension bar?
Not much at all
Hello so your saying I can pick up the SC4 and KW5 since they work the same as the 1's versions, but can open more locks with the extra length. In the video you used them on a 6 cylinder lock as intended, but have you used the SC4/KW5 on 5 cylinder locks with success? The only reason I ask is since the SC4/KW5 6 pin tool is longer when it bottom out will the design not allow it to grab the number 5 pin without needing to pull out. I'm assuming by default the SC4/KW5 in the 5 pin lock will already be one slot outside the lock when it bottoms out but will it still be able to grab all 5 pins? Thanks
Look at one of my more recent videos. If you use a spacer it makes the 6 pin version work on 5 pin more easily
@@HelpfulLockPicker My bad new to the community of lock picking lol. OK cool I found a site that has those spacers so cool. Thanks again for your reply👍
@@HelpfulLockPicker where can i buy these genuine lishi toolS?
We need to get a US company to make knockoff versions of these cheaper. China does it to almost every US made product!We need to start doing it back.
Thank you for sharing
Seeing that the original tool has a matte surface I'd wager a guess: the "genuine" variant's surface will scratch up if used a lot and therefore become harder to read.
One question, though: is the text etched in on the original one? The "genuine" one?
Thanks for introducing us to the cheaper ones!
I will have to take a closer look later and get back to you
@@HelpfulLockPicker just a friendly reminder, I know you're busy
@@HelpfulLockPickerAny news here? Etching on lishi
Also wondering
I bought a MS1/MS2 Lishi on eBay to decode Master Locks. It displays Mr Lishi's face. A locksmith couldn't cut any useable keys from the cut numbers I provided. I read the numbers on the tool several times so I know I was correct. I only found one video showing a key being cut from Lishi numbers and demonstrating that the key fit. The locksmith discovered that he had to add 1 to each key cut number for it to work. Don't waste over $100 on a tool that can't decode correctly.
You likely were applying tension to the arm of the tool, which will deflect it and show the wrong depth. You have to let the arm simply lay down from gravity. I can assure you, these tools are not the problem, it's operator error. I ran into the same problem the first time using them.
How to buy that sir
Hello does that thing works in every lock like cars motorbike house locks ? And where do I get that I live in Africa and I really need that one
You need to get a specific Lishi for each specific lock. They do not have them for all locks. Most of them are for auto locks.
Isn't kw1 and kw5 different keyways? Why would it surprise you that it's a tight fit?
It's an observation worth noting
Excuse me but all those kw5 kw1 rhey all cost seperately this much? Or its whole package
I bought them all separately
Are there any Lishi tools for European locks? Like Assa, Keso or Ikon?
Not yet
mine has a picture of mr lishi and the blue emblem on the back. and it sells for $15.00
The Original looks like it has an industrial chrome finish the other absolutely does not. That may be why it feels different to you. I noticed that the original with the satin chrome is way easier to read.
Thanks for sharing
Hi and thank you. How do I know which version number for Skoda Octavia 2007?
You would need to run it through a database.
Sorry for the naivety but how do i do that?
Hi do they the cheaper lishi m1 and do you have a link to the cheaper lishi tools thanks for the video
I think lockpicks.com sells them. I could be wrong
@@HelpfulLockPicker thanks for your video content it will save me and many others alot of money,if you have any questions for me,as I am a locksmith in Canada I would be happy to answer them finest Regards;
Ronald Cochrane
@@Rocketlockopener what machine do you use? I have HPC Blitz and Silca Flash 009
@@HelpfulLockPicker hi I use the blitz and the wenexing key duplicator along with hpc punch great
For portability.
I got a question would it be better for me to go with the seven pin and used a 3-D printed spacer and that way I can remove it when I have a six pin lock.
KW5 6 pin AM5 7 pin by using the plastic 3-D printed spacer that will give me more options.
BE2 7 pin and simply just skip the 6 pound but use the same keyhole
Then I should only have to purchase two tools and just use the spacer or remove the spacer give me an answer.
Please do a new video for 2021 thank you.
Lishi Standoff Spacers (bag of 5)
Product Code: Lishi Standoff Spacers
Availability: In Stock
$5.00
Purchase from red team tools.
Does not seem to make a difference that I can see so far between the genuine and the aftermarket
Comparing the Cheaper "Genuine" Lishi to the "Original" Lishi
I can see if I was doing this as a business but I am doing it just for a hobby.
I have a spacer which I haven't tested yet. It does seem like a reasonable option. AM5 is not 7 pins though
Great video! Do you know if this tools works with European locks? Like Cisa, Abus, Tesa.. etc.?
Unfortunately, these tools only work for the specific keyway that they are built for. As far as I know, a version for those locks has not been made yet
I was watching one Video where they opened an Abus Lock with KW1. Have you tried it on europe Locks?
@@sommersdorthea636 link for that video?
@@nomercy7161 th-cam.com/video/v2K_WgL71Ro/w-d-xo.html
@@sommersdorthea636 Thank but i think it's different for padlocks and home locks😎👍
Where did you buy these? I couldn’t find the website or link to buy one on the lishi website. Also, I was looking at these locks earlier today and this video gets in my feed a few hours later, coincidence? haha
I bought mine on ebay
@@HelpfulLockPicker eBay used to be great but now they charge sales tax and the tax narrows the price gap between the Original and the "Genuine" because the Original can be purchased on some sites that don't charge sales tax. The Original sells for $100 when on sale and then there is no shipping and no sales tax. That makes the Genuine less tempting.
genuine lishi makes copies of original lishi made by the inventor of the tool, Mr Li. I personally will never buy the knockoffs. I support the inventor and want him to keep making new ones for the rest of these bums to copy
Thanks for sharing your support for Mr. Lishi!
HelpfulLockPicker thank you for the kind words
You are most certainly welcome. You recognition is not necessary but it is nice to see all the wonderful channels of lock sport continuing to spread their positivity. It is a really rewarding thing to see.
They’re ALL made by mr Lishi………do your research on why there are different names.
@@ZetaReticulian that isn’t correct. Genuine Lishi is not affiliated with mr Li at all.
Based on this video the Genuine KW1 and SC1 gave spot on readings, but the Genuine KW5 and SC4 gave readings that are half a step off. The Original KW1 and SC1 gave slightly off readings but the Original KW5 and SC4 gave spot on readings. So I'd get the Genuine KW1 and Genuine SC1 but would get the Original KW5 and Original SC4.
Thanks for sharing your observations!
That's because one is 6 pin and the others are for 5 pin
is this applicable on one key or more?
Only the profile it is made for
@@HelpfulLockPicker tnx,,
those are cool
Thanks for checking them out! So far I enjoy them a lot!
What would I need to pick a 1970s Ford f100
The corresponding lishi tool
What is the difference between sc1 sc4 kw1?
The keyway profile
Thanks for this. I bought the kw1 & sc1 for $129.00. Hope to be able to read the sc4 & kw5 by projecting out the depth lines.
thanks for sharing
I need to get a new one because some cxxts stole my work van with all my tool now it's goin to take me time to get everything I had back
That is unfortunate. Hopefully everything is looking better for you
Why do you not test them in the field comparing ware n tear?
That could be a reasonable comparison to make
I could get one, but.....I can do exactly what a lishi does with a tension wrench and a specific hook that most people don't use. As for decoding the lishi does that.
I would say at the decoding is really the only important part though
@@HelpfulLockPicker I can't dispute that it is very useful for that.
In a few weeks I am going to attempt an unorthodox decoding idea. It will take a little time to sort about but I'm interest to see what happens
Where do you purchase these
I bought mine on eBay
You said they match up perfectly. I took screen shots and placed the images over eachother, they weren't exactly the same when decoded. Granted the difference was small enough that a simple wiggle of the key would make up for the difference. I would assume that the fake brand would be the one requiring the extra wiggling on cut keys. Though a difference is there, like i said it is negligible. That said, thanks for the video it was great! 👍
Thanks for sharing
how would it make a difference on the key u cut if u decode a 2 cut on both tools??
Do you have the link to buy it
Which one?
I want to get the sc4 and Quickset one
Do you know if they make for m1 and m5
A Masterlock Original Lishi is coming out I don't know about the genuine version
genuine lishi copies everything original lishi makes. they dont invent anything. original lishi M1/M5 will be out soon. give it a few months and these bums will release knock offs
Where you get such crazy prices for them.
Which one?
Can you please tell us which eBay seller you purchase from? It would make things so much easier for everyone looking. Thanks much
I don't think he sells them anymore because eBay probably told him he can't sell them
Where can we buy a set of Genuine Lishi set??????
The internet
What is the lychee of the qualin number 050 UL
Thanks
@@HelpfulLockPicker
The question is, what's Li Chi's number for famous Italian sunderlands like U.L. 050?
@@HelpfulLockPicker
I need an answer, please.
Where is available..
www.originallishi.com/vendors/
i want this product
Thank you for sharing
how much cost this product tel me sir
$120 or $59
General rule of thumb is you get what you pay for! Same as pick sets you can buy junk that won't last or a quality set that will last forever if taken care of! The knock off version Lishi might not last the test of time or have some other defect not known yet or it could be the exception
In that case forever means about 1 year for me😂
This is a point I look forward to finding out. I plan to use this as my set that I'm a little bit rougher on so it will be good to truthfully see how long it lasts :-)
I will let you know how they hold up :)
Not bad at all. I didn't see the AM5.
I didn't buy one because the original one isn't worth having
I’ve been a locksmith for 15 years. Buy the original Lishi. Trust me.
Thanks for sharing
They are on Amazon also at the cheaper price.
Thanks for sharing
To my old eyes, it looked to me like the original markings were cleaner and easier to read. That would be the ones with the round body, not the flat-sided one.
Thank you for sharing
Show auto locks such as door, trunk, ignition.
I would check out boredlockpicker. He is all about those
I just spent over 700 dollars on all of the house/padlock lishi tools. If I were to buy all the lishi tools for automobiles I'd be down another 900 dollars. Guess I'll stick to using the air wedge and reaching rods to open locked cars. Lol
Thank you for sharing.
Aliexpress has them for around 25$
The original Lishi tool markings are far easier to read than those on the Genuinelishi tools.
Thanks for sharing!
The knock off genuine kind now also have Mr lishis face on them. Now u can only tell by the part the tension arm connects to. Original has a round look the genuine copys have a squared off connector collar
Thank you for sharing
Can you share a link? Having trouble finding these
I haven't looked in a while
Fejk sponced content!
Thanks for sharing