AutocAD 2D Practice Drawing / Exercise 1 / Basic & Advance Tutorial
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- Welcome To A_CAD Tutorials
I am Anket Kamtekar
In this video I show the 2D basic Exercise Of Autocad for Beginners
AutocAD 2D Practice Drawing | Exercise 1 | Basic Tutorial
Download the Image file of Drawing
i.imgur.com/WU...
i.imgur.com/uE...
i.imgur.com/Ve...
i.imgur.com/Sr...
i.imgur.com/X4...
i.imgur.com/QR...
"Just Check Out this Video"
Give Me Any Suggestions About This Video & If You Have Any Problem About Autocad Plz Write in Comment Box of video As soon As Possible I will Response this.....
Don't Forget To Subscribe My Channel
/ anketkamtekar
Like & Share
Thank You ..
#AutocAD_2D_Practice_Drawing
#Exercise_1
#Basic_&_Advance_Tutorial
great video ,you did not say a word and explain everything.thank you very much..finally good teacher :)
Also I try to explain in speech ... Thanks for you valuable comment and suggestions...
Excellent
Great video. Became a fan. Best way to teach is by practical.
Thanks a lot Sir. I am a construction worker from Singapore . Nationality is Bangladeshi.
GREAT TUTORIAL__SUPERB
Tnq for this 2D Drowning, I learn many type of commands in this Drowning
Again tnq 😈
Wonderful, drawing...appreciated highly
thank you for the tutorial. i like the way you chose to use music than talking to avoid wasted time and just focus on the drawing
You are the first ...to comment and think like that..
Other Buddy say to add speech...
Thanks dear for suggest
Very good video
I like without explanation . Thank you sir.
Thank you very useful vedio
Mast
Sir i am lerner you are great job i am thankful to you
Very nice drawing draw.thank you.
This makes my finger to hit subscribe button...
Wonderful bro
thnks foe explaining properly
Excellent, good
everyone in this world must know this channel if they want practice Autocad
Thankyou so much 😊 , upload more videos like this , i will practice it ☺️
Nice
you are the best
Excellent sir
this changed my life ! :O
Thank you so much sir
I love your videos and your channel
Millions thanks
th-cam.com/video/_NWxXvO58ms/w-d-xo.html
Thank you for this drawing
thanks for the tutorial
thanks ........................great video
What a lovely method.thanks a lot sir.
Great.
Like the way you are drawing and the background music is so refreshing..love it
About the keyway ..... if u moved it from the center point of the rectangle to the circle, doesnt that make the keyway “8 x 2” instead of “8x4”. I honestly got stuck there a little.
Yes..just trim for finish
same observation. glad to found someone with the same comment. i thought i was analyzing it all wrong .
Exalent bro
yeah thank you..beneficial for practice -:)
Really Great Lesson..
Very good pro
Thank you, It helped me , I will prefer an explanation rather then the music in the background
Sure dear ..i aslo try this..
Thnks your valuable feedback..
great... happy learning
A Godsend! Superb tutorials, best I have seen in or out of class.
great video bro
excellent video...congrats
Last step,instead of trimming at every circle I think making the pattern first and using array was better.
Hello sir! If I small request ,we don't want music sir,we want to leasning your explanation words, this is my humble request, and your teaching is very well, thanking you sir!
Thrinetra Vickram
Yes dear ..i am workig on it...
Thanks for your suggestion ..
Just wow ❣️, loved it
Thank you. This explains could be slow. Thank you anyway. It helped me
I realized in the midst of making this that the circles in the beginning you were using the measurement for diameter but then it gets changed mid-way through. I had to go back. Figured it out though. Great sample.. took me a lot longer to do than I thought it would :(
thanks bro
tkanks a lot
Thanks pro
No need to study!
Just got watched your videos
FREE sheet metal, gears, curves and others
www.onlinecadtools.com/myindex_en.HTM
www.onlinecadtools.com/english/html/sheet_metal/index.HTM
www.onlinecadtools.com/english/html/index_gears.HTM
www.onlinecadtools.com/english/html/index_curves.HTM
www.onlinecadtools.com/english/html/index_st.HTM
th-cam.com/video/7W1_jJ1XWzo/w-d-xo.html
th-cam.com/video/T-irEOEON2w/w-d-xo.html
Thanks!
I need advertising and orders
Great video series; goood job.
Great tutorial. Looking forward to learn more in the future. Thank you so much for sharing your expertise.
My question is: In the frist excercise that you have shiown (Bicycle Drg.) where did you get the values? Was it already predetermined by you? Thanks.
FREE sheet metal, gears, curves and others
www.onlinecadtools.com/myindex_en.HTM
www.onlinecadtools.com/english/html/sheet_metal/index.HTM
www.onlinecadtools.com/english/html/index_gears.HTM
www.onlinecadtools.com/english/html/index_curves.HTM
www.onlinecadtools.com/english/html/index_st.HTM
th-cam.com/video/7W1_jJ1XWzo/w-d-xo.html
th-cam.com/video/T-irEOEON2w/w-d-xo.html
Thanks!
I need advertising and orders
👍👍👍👍👍👍
Thanks
Great tutorial, thanks! It's a much smarter way to draw a rectangle first and then just move it by the center than what I did which was offset 4 lines to form a rectangle and then trimmed them. But the dimension seems a bit off, as the center is used, shouldn't it be 8x8, then we can get a 8x4 keyway? Thanks again.
very helpful
pls let us know how to put dimensions
Videos on dimensioning comming very soon...
Sir nice video but please add speech also increase to understanding
Sure..i am working on it..
Thanks for advice..
Thx
6:14 "hold shit key" xD
yes I have a suggestion why you don't make this video in Spanish, loll. I was enjoying with this video. It is very helpful, thanks.
thks
I have problem in last step where we use TRIM command for making 18*R20 teeth on diameter 360.
Trim command is not working . Kindly guide
That's mean your array is associated..just explode the array and try to trim it
@@anketkamtekar Thank You Sir for your valuable and knowledge full comment.
5 minutes in and tNice tutorials is 10 tis harder than garageband on my phone
mrc beaucoup
Is there any method to save the time to trim at last of polar array using ... otherwise nice video...
i already change the line type to "center" and scale it for centre line but it still showing solid line. Help?
1) Change LTS of drawing..
Set minimum value for current drawing
2) change line scale from properties of individual entities..
Can u upload video of HOW TO BRING CUSTOM HATCH in AUTOCAD
Sure .. thnks for your valuable feedback..
What does The Letter: "D" in autocad when u do the circle?
D for diameter
hye, can i know what type of work switching you use? is it drafting & annotation? tq
In the status bar..
Right down corner..
There is icon like setting symbol..
Just click on it and switch the workspace
@@anketkamtekar means for these practice you use drafting & annotation?
@@sitimahfuzah4181
Doesn't matter which workspace you have to use...
You can manage & Customize workspace as per your need..and use this modified workspace ..
@@anketkamtekar ouh I see. Okay sir thank you so much 😊
Welcome
What are the drawing units? Why is the diameter so huge?
how much limits set of this drawing
I couldn't used limit command ..if you suitable to draw with limit command so you can manage as per overall drawing dimensions
I have no idea what he did with the polar lines for the angles there were no values or anything I'm trying to do the way he shows in the video and it's just not working out for me
In my laptop i put D 60 circle, the circle is too large and didn't show full circle. How to set size in AutoCAD bro
Type command Z
Enter
A
Enter
@@anketkamtekar inka size less cheyali bro
@@ManojKumar-fh2fr
Size less means what?????
..there is 1:1 scale...
You can manage with zooming as fit to screen...
Sir I have a similar drawing but little difficult.
Can I get the solution by you.?
sure..
@@anketkamtekar how could I send you drawing.
Please send your mail id
kamtekaranket@gmail.com
@@anketkamtekar sir please check your mail .
I sent to you.
And please try to provide a video on the drawing as soon as possible.
@@ajperfect8524
yes .. received
Hi sir when I am applying arrey on 360 diameter circle after that I am applying trime on 20 radius circle my trime is not coming properley my circle line is also getting trime.
Make sure your array is not associate..
Just explode the array and try to fillet with radius 20..
What's the name of the tune? I like it.
PLEASE UPLOAD THIS TYPE OF DRAWINGS MORE USE FULL . SO PLEASE REQUIRED ANY TOOL TESTING USAGE PROVIDE ME (MORE TOOLS HAVE TO USE (SPECIFIC)) THANK U FOR YOUR TUTORIAL (PAYMENT ALSO SUITABLE )
Ye software 2018 ka he kya plz reply ya 2017 ka he
2017...
@@anketkamtekar sir solid work par video banao
Sir it will be more easy to learn if you speak the steps .
th-cam.com/video/_NWxXvO58ms/w-d-xo.html
Nice...no music please, let us study!!
How we know its 24 in between(array). 7 circle, did it came automatically. Pls reply
Good Question ..
We don't need to calculate Angle between two circles..
its not 24° .. its 20°
because we have to place 7 circles in 120°
120/6 = 20
120/CT
How to draw polar lines..
Please send 2d diagram with background white only
am a fresher...couldn't catch abt polar tracing
Polor tracking is same as ortho mode..but in ortho mode you can draw, move object horizontally & vertically ..
In polor tracking you can draw , move object in Particular set Angle ..like
30°-60-90
45-90..
You can't use ortho mode (F8) & Polor tracking (F10) At same time..
Please do mention the name of the part we are drawing and also its details.
i am no drafter but, i guess the keyway was done not correctly.
Sir.can i know that how to put the dimensions like this: 4 holes D4
Hello Sir,
Sir hum log ko apki music ni chaiye apki listening chaiya
Kuch bhi kidhar se ky ky bna, re kuch pta hi ni chl ra bs views paane ke liye video bnaye ho 🤧
I don't care about views or subscribed bumbers ...
Now you have watching old videos
just check out another latest videos..
im not able to trim the polar array
because entities are in associate .. just explode it.. and try to trim
@@anketkamtekar thank you
Array used with new way, version?
How much limit set value
Its time waste command..
I am not recommended this ..
You can set zoom window as per you diagrams..
How to draw an angles through the line
How to show dimensions in diagram
Version of this autocad?
2017
Do you have some dwg file with these one?
Yaaah
@@anketkamtekar can u send it to my email?? Really need
@@anketkamtekar im stuck with linetype scale. My LTS is default in 1 not 10000 then when i follow the 10 it stays on solid line
Sure
@@anketkamtekar elizabethjpdg1@gmail.com
Key way explain me please
hold SHIT key :D :D :D, that was a funny mistake 6:13
Its tric dude..what funny mistake you see in this...
@@anketkamtekar you said shit instead of shift
@@narcoticchaloopaful yes its my mistake
@@anketkamtekar no worries my guy. Do you know the name of the song you used?
@@narcoticchaloopaful
I inform you latter...
i cant download the image
Angal kese nikala
يارب هندسه بترول🤲🙏😭