How to Fix LED Hyperflashing
ฝัง
- เผยแพร่เมื่อ 20 ก.ย. 2020
- How to fix LED hyperflashing and other LED light bulb issues? This video will show you how to solve this common LED lighting problem.
The resistor I used is 50 watt and 10 ohms. You may use lower watt and ohm resistors such as 25 watts ans 6 ohms.
Products Used in this Video can be Found Here:
www.noahsgarage.com/mechanics...
Related Videos
How to Replace Halogen Bulbs:
• Paano Palitan ang Halo...
How to Replace All Rear Light Bulbs:
• Paano Palitan ng LED s...
How to Replace Interior Lights:
• Paano Palitan ng LED a...
Questions and Answers:
• Questions and Answers ...
Share this video:
• Paano Ayusin ang LED n...
Disclaimer:
Noah's Garage has no liability for any property damage or physical injury that resulted from incorrect use of any equipment or tools from any information contained in this video. You can use any information in this video at your own risk and discretion. Also, the information contained in this video doesn't guarantee a particular result.
As a DIY automotive channel, Noah's Garage highly encourages "safety" as its highest priority. Besides from the safe practices contained in this video, the users are responsible for following their own safety measures to avoid any unwanted accidents.
This video is supported by a monetization program called Google Adsense through TH-cam Partner Program. I also use affiliate links from various companies such as Shopee, Lazada, Amazon and many others to make money out of this channel.
Fair Use Notice:
Opinions and all information in this video are owned by Noah's Garage. Some images, music and products are owned by their respective owners/companies and are most likely a copyrighted materials.
Such materials are made available for entertainment, information, educational, teaching and research purposes only as stated by the US Copyright Law which refers to "fair use" policy (Title 17 U.S.C section 106A-117).
www.copyright.gov/title17/92chap1.html
th-cam.com/users/aboutcopyright/fair-...
www.law.cornell.edu/uscode/text/17 - ยานยนต์และพาหนะ
![ฉันจะ "แพรี่" ให้หมด - ผู้แข็งแกร่งที่สุดในโลกอยากจะเป็นนักผจญภัยให้ได้ - ตอนที่ 04 [ซับไทย]](http://i.ytimg.com/vi/PvmuP8y9IPk/mqdefault.jpg)
If you don't want to install resistors, then you only need to buy LED's that meet your car's wattage specifications. Good thing I also made adjustment for this DIY and installed exactly the best LED bulbs for my Montero. Watch here to learn more th-cam.com/video/GDUNnGyhlAQ/w-d-xo.html
For questions on where to purchase products featured in this video, please visit my website here:
www.noahsgarage.com/mechanics-tools/
For other concerns, drop a message at my Facebook page located at the "About Us" section of my channel.
Some of you may be hesitant on splicing wires on your car. Don't worry, the feeling is mutual. So if you still want LED's on your headlights and tail lights without the hassle of using resistors, then I suggest you buy a high-powered LED bulb that matches or exceed the stock specifications. I already bought some online. I will update you guys if these LED's are worth the money and truly doesn't need resistors.
By the way, the resistor I used is 50 watt and 10 ohms. You may use lower watt and ohm resistors such as 25 watts and 6 ohms
Thank you for watching ☺
Best Montero DYI videos. Keep it up.
Thank you po sir Christian 😊
Thank you again, Sir Noah!!
Welcome sir Nathan
Dont forget to subscribe
Bagong kaalaman na naman idol! Thank you thank you!
Salamat po sir Rommel.
Noah na lang po sir, wag idol
Nice! Thanks for the video.
Salamat sir Bullet.
Dont forget to Subscribe
Napapa-DIY tuloy ako ng di oras sa mga projects mo sir! Good job on your channel!
Salamat sir EJ.
If you are new to my channel, please consider subscribing
Good job 👍 kasi ma detalye...
Salamat po sir
❤❤❤❤❤
Dagdag ntin sir sa taping, use rubber tape kasi pagtagal bubuka yan sa init,electrical tape then rubber tape,but over all great diy sir!goodluck and God bless😊
Salamat sir
Dont forget to subscribe 🙂
Suggestion, It is better to include the specs of the resistor on the video. The resistant, wattage of it and
how it affect the blinking rate. Nice work, keep it up.
Opo nga pala. Hehe sory po nalimutan. Nagkamali mali po kasi. I-pin ko na lang po sa video at sa description. Salamat sir
Boss Noah's Garage wala po kaUng video DIY kung paano baklasin ang boung dashboard ng montero gen 2?
matagal kona pong inabangan yan, sana may gagawin kang ganoon alam kung daming naghihintay niyan.
Wala pa po sir, aalamin ko pa po. Naka focus po muna tayo sa overheating issue ng Monty ko sir. Darating din po tayo jan sir
Ayos sir..san mo nbili ung set mo ng connectors/Isolators..w16w at ng resistors mo sir? TIA
www.noahsgarage.com/mechanics-tools/
Just search "resistors"
Thanks sir
I resolved my Hyper Flashing on my LED in my old Toyota Corolla 1991 by simply replacing Flasher Relay to LED Flasher ... cheaper & simpler ...
Thanks for the tip mam.
Dont forget to subscribe 🙂
Goodmorning Sir Noah, tanong ko lang sana about sa AUTO ELECTRICAL at AUTO TECHNICIAN magkaparihas ba sila ng field? Thanks Godbless
Ang alam ko magkaiba po sir
Dont forget to subscribe
ayos! pag ganyan problema ko sa mga ilaw balik ko nalang sa dati yung ilaw kong stock:)) Hahahaha! ibang D.I.Y. Magagawa ko pag ganyan. masaya na ko sa standard na 5v na ilaw. :))
Oo nga po eh. Napasubo rin po ako sa LED. Maganda naman po talaga ang LED sir. Malayo po sa stock, un nga lang po, baka maghyper flash hehe
5 watts you mean?
@@NoahsGarage Sir, maiba lang po ako. Tungkol po sa RFID, kung alam lang po ninyo, sa San Fernando, Pampanga Exit po ba (customer service) nagkakabit sila? Mas malapit po kasi ako roon. Sa Shopee po kasi e out of stock na. Salamat po in advance.
@@solatom4267 most likely sir kung customer service. Anyway madali lang naman po sir ikabit, kayang kaya niyo na po un. Ang mahalaga makabili po kayu ng sticker.
Dont forget to subscribe 😉
@@solatom4267 ay tama sir😅 salamat sa pag tama. 12v 5w pala yun 😂
Oh....much better chajge the relay or fuse mod type....
Dont forget to subscribe 🙂
Sir saan niyo po nabili wire insulators and connectors niyo? Set na po ba yan?
Online sir Nelson
Dito po
www.noahsgarage.com/mechanics-tools/
Just search "wire cable connectors"
Dont forget to subscribe
Sir Noah, pa mention ng value ng resistor n ginamit mo...ilang ohms and ilang watts...tia
50W and 10 ohms sir. But you may use lower capacity resistors po
www.noahsgarage.com/mechanics-tools/
Just search resistors
Thank you sir
I wonder lang dun sa 3rd brake light located sa may rear window. Nakita ko kasi yung ininstall nyo na T10 bulb is yung medyo dim type. Meron kasi nabibili sa shopee na mga T10 bulbs na malalakas yung ilaw I'm not sure if nakakita na kayo ng mga gel type na T10 bulbs. Pag yun kaya ang kinabit ko may chance kaya na hindi mag loko tulad nung nakikita o yung inaayos nyo sa video? Thanks!
Nagkamali po ako jan sir initially (you can watch my previous video on rear light LED replacement) where I used T10 which is supposed to be W16W. That's why nag loko po. But it is now fixed. Just use W16W sir.
Dont forget to subscribe
Sir, parallel po ba or nakaseries yun connection ng resistor, thank you
Parallel sir. Only one resistor per bulb sir
Dont forget to subscribe 😉
Sir noah ask ko lang po bqkq mqy link po kayo ng led na hindi na kelangan ng resistor.. thank you sir.
wala po ako marecommend sir, lalo na kung di ko pa nagamit sir.
Good pm sir noah, ask ko lang if nag overheat yung mga resistors niyo na ininstall? And kung nalusaw ba yung tape na kinabit niyo? Thank you
Tinanggal ko rin sir kasi sobra init kaya bumili ako ng led na di na kelangan ng resistor.
Dont forget to subscribe 🙂
@@NoahsGarage sir noah last thing po, i just watched your vid about po dun sa led na ininstall niyo na hindi wala ng resistors. Kamusta po yun? Hindi na po ba siya nag hyperflash? Thank you po
sir nd po ba shorted mangyayari sa nilagay nyo na resistor kz sa positive at negative nyo sya itinap?ano po klase na resistor yan?
Di naman po sir nag short. Na idrive ko na rin po ng matagal ok naman po. Ang worry ko lang is yung heat, super init niya. Kaya totoo po yung mga ibang YT videos na nagsasabi na mainit yung resistor.
Sir gnwa ko un pag install nyo ok un signal light hindi hyperflas Kaya lng my problem bkit po humina ilaw ng hazard
Baka mahinang watts nabili mong led sir
Just wondering sir. Kasi all about heat ng resistor ang pinaguusapan. Kahit po ba hindi naka engage ang flasher or turn light umiinit na agad ang resistor ?
Kapag umiilaw lang sir ska siya umiinit. Dapat nakadikit ung resistor sa metal which acts as you heat sink.
Dont forget to subscribe
Sir Noah ganyan po ba talaga mangyayari pag pinalitan ng LED lahat kagaya nang sayo?
Kapag nag hyperflash lang po. Pero me mga jew vids ako na update para jan. Di na kailangan ng resistors kasi umiinit po iyan.
Dont forget to subscribe 🙂
May instance na po ba may nasunog na resistor? Kasi pag matagal po naka hazzard possible po masunog?
Possible sir lalo na kapag hindi nakaka escape ang heat, kaya dapat naka dikit siya sa metal. Tinanggal ko rin agad ung ganyan ko sir kasi nga umiinit. Pero talagang effective, mawala talaga ung hyperflashing.
Dont forget to subscribe
Ask ko lng po if pwede kahit isang pair lng po ng load resistor?
Pwede sir
Dont forget to subscribe 🙂
Tanong lang. Adding resistors produce heat. So mababali wala ba ang energy savings advantage ng LED kumpara sa regular? Magle-led sana ako para bawas load sa battery. Pero kung ganun din, eh hindi na lang.
Use led that doesnt require resistor sir.
Dont forget to subscribe 🙂
Ang dami nang tina tap mas ok parin ang standard na rear at break light at reverse.. Mahirap na kc masunog ang sasakyan.. But ok na ok ang mga led headlights..
Tama sir. Sayang mga LED ko kung di ko gamitin. Pero umorder na ako ng LED na mataas ang wattage. Update ko kayo gawa ako video jan mga sir
Sa akin sir brake and park light lang gusto ko i-LED. Nilagyan ko pa ng 6ohms diode. Ok naman na, kaso nagkakaproblema kapag nag flash na yung signal lights, medyo nah fflash din siya. Any inputs Sir? Salamat!
Check mo sir kung tamang bulb ang naikabit mo. Magflushing yan kapag mali ang bulb na nailagay.
Dont forget to subscribe 🙂
Specs ng resitor sir? Pwede po ba pa-share ng link kung saan available online..TIA
Hello Mam Susan
50 watts and 10ohms po but you may use lower capacity po
Ito po ang link
www.noahsgarage.com/mechanics-tools/
Just search "Resistors"
Dont forget to subscribe
Good day sir ok po ba hanggang nagyon yung resistor simula ng nilagay nio salamat po sana ma sagot.
Tinanggal ko na sir
Dont forget to subscribe 🙂
@@NoahsGarage salamat sir bakit may problema po bah sir?
Resistors ang solusyon kasi kakainin nya ang excess power so iinit talaga sya. Sana po automotive 3m double sided para kahit uminit pwede. Tsaka suggestion din po kapag nagsosolder e ilagay po sa heat sink/basang basahan para iabsorb ng sink/basahan yung heat at hindi masira resistor lalo kung matatagalan sa pagsolder kung hindi sanay. Pero good thing malaki heat sink ng resistor mo po. Tsaka sa paggamit ng t-tap e paghiwalayin po konti para magkatabi sila imbes na magkapatong at hindi maging bulky.
sir noah kung headlight low at high beam, fog light at park light lang sa unahan ang papalitan ko mg hyper flash ba?
Hindi po sir. As is na po un
Hello sir. Salamat sa mga tip. Sobra init nga po, di kaya masunog ang sockets ko sir? Di po talaga ako marunong mag solder, sinabi ko rin sa video.
Masusunog muna wires mo po bago makarating sa socket kung sobra init na ng heat sink ng resistors tapos hindi enough yung size ng heat sink sa amount ng heat. I suggest idikit mo resistor sa body ng montero para meron ka malaking heat sink. Pero to do that e need mo magdrill or half double sided lang lagyan mo tapos yung half e make sure nakadikit sa body ng montero. Paano mo po nadesisyunan ilang ohms ng resistor ang dapat bilhin?
@@markmarquez5431 Oh so ung heat sink is yung metal body ng montero. Kailangan talagang idikit sa metal body sir? Ayaw ko talagang mag drill eh. Pero sige sir gawin ko yan. Hintay ko muna ung LED na binili ko na bago, high wattage un at sabi walang hyperflash. Para tanggalin ko na mga resistors. Nabasa ko lang sir ung tungkol sa resistors. Ang sabi pwede naman 50 watts pero 25 watts ok na. Eh, mas gusto ko malaking watts para sure hehe. Maraming salamat sa inputs mo sir, big help
Sa isang sasakyan ba sir un bang 4 na led bulb ba ang lalagayan ng resistor ? Or pwede 2 lng na resistor pwede
4 resistor per bulb sir. I suggest bili kana lang ng led na hindi nag hhyperflush
Dont forget to subscribe 🙂
@@NoahsGarage my alam b kayo sir n brand ng led na wala hypey flash ?
Wala bang plug and play?
Wala po sir
Dont forget to subscribe
Sir lalagyan pa ba sa harap ng resistor sa signal light
Yes sir Jesus. All bulbs po, one resistor per bulb
Dont forget to subscribe
@@NoahsGarage t.y. sir
Sir pinalitan ko ng led bulb yong brake pumuputok nman yong fuse nya
@@jesusmaxion7260 Bka sobrang taas ng wattage sir ng LED na nilagay mo? Restore mo n lang ung dati then palita mo ung fuse sir.
@@NoahsGarage ok t.y.