I have a black ceramic coated car and use Gyeon's Foam for the prewash and Bathe+ for the contact wash that I do every week and am very satisfied with the results. Every 3rd wash I follow up with Gyeon's Ceramic Detailer to get super levels of gloss and slickness.
I don’t usually go for shampoos with protection but of the ones I have used this is probably the best. Makes me wonder what it’d be like if you just used it every week as your normal shampoo the car would probably be really well protected all the time with out the need for an actual LSP at all
This is a very good shout Nick! And even then, you can use it at every 3rd or wash or so. With that you can enjoy some of them sudsy shampoos, too. I can imagine myself using Bathe+ from a foam lance as a spray and seal protection, because I found it to be rather good. Appreciate you were watching and taking your time 🙌
Indeed, I like to use such products to put some protection at the end. Also, Gyeon Bathe+ is a very good product in this category, highly recommended 🙌
I can’t get enough of it. Just started using bathe+ for weekly maintenance wash and bathe+ twinned with wet coat produces a wonderful coating. Also. Next time you wash. Provided you use a gentle foam then wash with bathe+ again, it complements the finish rather than stripping it. Win win. Then layer up again with wet coat. Happy days. Yet to find an alternative that would lure me away.
One of the biggest “drawback” of Gyeon, is their price range in my opinion. Them products looks really good and quality though, but probably not for everyone. I haven’t use many of their products yet, but what I have tried so far were all quality stuff. So I sort of get the high price. Bathe+ is the one, that I wouldn’t look out just by reading product descriptions, however, I really like it and see its place on the market. If you will have a chance, grab one of their products and see how that goes. Thanks for watching Andy 🙌
I disagree. Here is the official “how to use” by Gyeon itself: “There are 3 ways of using Q²M Bathe+. Dilute it and use as a regular shampoo with hydrophobic properties, spray on the car with a foam lance or simply spread it on the wet, clean paintwork with a microfibre wash mitt. TIP: Always work on cool paint, never in direct sunlight. Work in sections and never let the product dry.” So, There are 3 ways to use this product, and I haven’t showed the one, where you can directly apply it to the mitt and wash. The measurements were might slightly off (Gyeon recommends 10-20ml of product) , which I stated at the beginning of the video. However, the product worked great, what you can see as well (if you have watched through). Everyone is entitled to express their opinions, if you are not happy with what you have seen, there are plenty other videos out there where you can roll on 🙌 I am 100% positive and still stand by my recommendation.
What are your thoughts about GYEON Bathe+ so far? ⬇️
I have a black ceramic coated car and use Gyeon's Foam for the prewash and Bathe+ for the contact wash that I do every week and am very satisfied with the results. Every 3rd wash I follow up with Gyeon's Ceramic Detailer to get super levels of gloss and slickness.
🙌👌🏻
I don’t usually go for shampoos with protection but of the ones I have used this is probably the best. Makes me wonder what it’d be like if you just used it every week as your normal shampoo the car would probably be really well protected all the time with out the need for an actual LSP at all
This is a very good shout Nick! And even then, you can use it at every 3rd or wash or so. With that you can enjoy some of them sudsy shampoos, too. I can imagine myself using Bathe+ from a foam lance as a spray and seal protection, because I found it to be rather good. Appreciate you were watching and taking your time 🙌
try labocosmetica revita, thank me later ;-)
@eliott0123 indeed! Revìtax is a great product, too 👍🏻
It makes sense to me as a spray and seal with foam cannon. I used it like that a few times and it’s very easy.
Indeed, I like to use such products to put some protection at the end. Also, Gyeon Bathe+ is a very good product in this category, highly recommended 🙌
I can’t get enough of it. Just started using bathe+ for weekly maintenance wash and bathe+ twinned with wet coat produces a wonderful coating. Also. Next time you wash. Provided you use a gentle foam then wash with bathe+ again, it complements the finish rather than stripping it. Win win. Then layer up again with wet coat. Happy days. Yet to find an alternative that would lure me away.
Very well said. Gyeon offers a great system in the industry. Thanks for sharing your experience 🙌🏻
Thanks, good review. I'm going to give it a try. Also, new subscriber.
Bathe+ is one of the best in its category of shampoos. 🔥 Welcome on board Mike ✌🏻
have you also try the soft99 kiwiami gloss shampoo?? is it like Gyeon Bath+
I haven’t yet. But Soft99 is a solid brand and make premium quality products, so probably that should be up to their standards 🙌
it's a company who's products I've never really tried. You hear so many good things yet I never seem to see them about so end up buying other brands.
One of the biggest “drawback” of Gyeon, is their price range in my opinion. Them products looks really good and quality though, but probably not for everyone. I haven’t use many of their products yet, but what I have tried so far were all quality stuff. So I sort of get the high price. Bathe+ is the one, that I wouldn’t look out just by reading product descriptions, however, I really like it and see its place on the market. If you will have a chance, grab one of their products and see how that goes. Thanks for watching Andy 🙌
It’s a bloody good product
It is indeed. I was surprised with its performance to be fair 👌🏻
I like this one a lot too
It’s good stuff indeed David 🙌
👍🏽🔥👌
🙌🙏
You used wrong in every way how can you give a recommendation?
I disagree.
Here is the official “how to use” by Gyeon itself:
“There are 3 ways of using Q²M Bathe+. Dilute it and use as a regular shampoo with hydrophobic properties, spray on the car with a foam lance or simply spread it on the wet, clean paintwork with a microfibre wash mitt.
TIP: Always work on cool paint, never in direct sunlight. Work in sections and never let the product dry.”
So, There are 3 ways to use this product, and I haven’t showed the one, where you can directly apply it to the mitt and wash. The measurements were might slightly off (Gyeon recommends 10-20ml of product) , which I stated at the beginning of the video.
However, the product worked great, what you can see as well (if you have watched through). Everyone is entitled to express their opinions, if you are not happy with what you have seen, there are plenty other videos out there where you can roll on 🙌
I am 100% positive and still stand by my recommendation.