I wish you guys had some of these seats in the showroom. I need to buy seats but I would like to try them out first. Maybe you could bring some out at the next Jeeps and Java.
Yes sir ! I checked your website and boom you got the proper brackets but I’m afraid of those duty taxes to Canada so now I’m looking into Canadian sites
As I was installing these in my 99' Tj I found that the previous owner had removed the seats to paint and left out a couple of bolts. This however did make the removal of the front seats quicker, now I just have to find new hardware.
It appears the electrical connectors are not sealed. Please let me know if I am wrong. If I am correct, this needs to be upgraded to sealed connectors.
Anybody have any thoughts on the safety of Corbeau seats? I can't find any dirt on them but wanted to get peoples opinion on whether or not aftermarket seats provide adequate safety mechanisms to OEM
When I was shorter in HS I ran a set of billet stainless seat riser blocks. Super sturdy and raised my seat so I could sit high. They’re offered from 1”-4” risers
Will the heat harness be compatible with the existing JK switch? (Though I imagine the Corbeau one is High/Low temp vs the stock High/Low heating position)
I don’t see why not, you would just need to do some creative wiring yourself with a multimeter and a connection tester to make sure everything checks out.
Glad to see that Quadratec is on top of things, especially when it comes down to pertinent product questions from potential customers... Yo 4WD Hardware!!! Here I come!!!!!
From the Corbeau Website. "With this bracket you will lose the tumble forward feature that the stock seats and brackets had." There is another way though. Corbeau offers an adapter plate that requires you to use the slider/tumble mechanism from your OEM Seats.. The trade off is they sit about an inch higher. (This applies to the TJ, I'm not sure about other models)
Of course! Corbeau has seat brackets for most Jeeps, you would just need the correct brackets. 95-01 XJ Driver Side - www.quadratec.com/products/24291_7000.htm 95-01 XJ Passenger Side - www.quadratec.com/products/24291_7001.htm
Nice.Will they fit in my XJ?
they sure will! Corbeau makes brackets for the XJ as well.
I’m happy you guys are doing things with TJs! It’s nice to not be forgotten about!! 👍
We'll never forget about the TJ!
@@Quadratec TJ is the soul of jeeps legacy . Please keep bringing new stuff to dressed out the TJ's
Gorgeous seats I might just get them for my new TJ 😊
I wish you guys had some of these seats in the showroom. I need to buy seats but I would like to try them out first. Maybe you could bring some out at the next Jeeps and Java.
great job, love that you include a link to where we can find these great products. sometimes some vids don't and finding shit ain't easy. thank you.
Oh very nice!! Now to see if I can mount these into my Xj ! Definitely like the heated option
You can for sure. Corbeau makes brackets for the XJ as well.
Yes sir ! I checked your website and boom you got the proper brackets but I’m afraid of those duty taxes to Canada so now I’m looking into Canadian sites
As I was installing these in my 99' Tj I found that the previous owner had removed the seats to paint and left out a couple of bolts. This however did make the removal of the front seats quicker, now I just have to find new hardware.
Were these new seats worth it?
@@calebbrown9171 100% they look better and hold you in place much better that the factory ones
Wow, GREAT looking seats! Maybe I’ll pick up a set for my YJ!
What about the roll bar? Does that prevent the recline? HOW COULD NOT NOT DISCUSS THAT? My guess is the recline function won't work.
Just installed these in a classic mustang I hate them. Blew a grand on them such a waist. Terribly uncomfortable.
did you connect both seats to a single fuse connector at the fuse panel? Is there a minimum fuse size?
I want the seats they pulled out of that '97 tj.
Awesome video....Corbeau should be paying you! Their chat was not very helpful on the seatbelt buckle....you were all over it! TY!
Nice install video, Badass looking seats too.
Okay but what the airbag and seatbelt light won’t go out and the ny state inspection will fail.
It appears the electrical connectors are not sealed. Please let me know if I am wrong. If I am correct, this needs to be upgraded to sealed connectors.
The seat Mount bracket in this video is not the same one in the website.
Do they actually tilt back or do they jam up against the roll bar?
Do you gain head room tho
I want. Christmas is so far away
Looks like you guys did not install the tumble hardware...hmmmm.....
Too bad they don’t have a color option that better matches the Sahara desert tan interior.
Yes they do, I just ordered some.
does this seat sit higher in the TJ than factory? and is it wider than the factory seat?
Anybody have any thoughts on the safety of Corbeau seats? I can't find any dirt on them but wanted to get peoples opinion on whether or not aftermarket seats provide adequate safety mechanisms to OEM
The brakets look lame. Plus you need a universal to install them. Not a good design, IMO>.
Are drivers' seats made by Corbeau enabled to be raised or lowered like OEM seats? I'm 5' 6" and like to sit high when offroading
When I was shorter in HS I ran a set of billet stainless seat riser blocks. Super sturdy and raised my seat so I could sit high. They’re offered from 1”-4” risers
Does it sit lower than the original seat?? Wondering if it would be position lower, that would help with my head clearance since I'm 6'6
This was years ago but I’m also 6’6 and was fitting in a tj a problem for you
They need seats like these for big boys😂
I don't see this seat design on the Quadratec website
www.quadratec.com/p/corbeau/hd-vinyl-trailcat-reclining-front-seat-pair?
Will the heat harness be compatible with the existing JK switch? (Though I imagine the Corbeau one is High/Low temp vs the stock High/Low heating position)
I was wondering the same thing
I don’t see why not, you would just need to do some creative wiring yourself with a multimeter and a connection tester to make sure everything checks out.
Does the passenger seat still slide and then tilt forward like the factory seat.?
Glad to see that Quadratec is on top of things, especially when it comes down to pertinent product questions from potential customers... Yo 4WD Hardware!!! Here I come!!!!!
From the Corbeau Website. "With this bracket you will lose the tumble forward feature that the stock seats and brackets had."
There is another way though. Corbeau offers an adapter plate that requires you to use the slider/tumble mechanism from your OEM Seats.. The trade off is they sit about an inch higher. (This applies to the TJ, I'm not sure about other models)
$$?
Entry level.
I will keep my power seats
Is a compatible for Jeep xj ?
Of course! Corbeau has seat brackets for most Jeeps, you would just need the correct brackets. 95-01 XJ Driver Side - www.quadratec.com/products/24291_7000.htm 95-01 XJ Passenger Side - www.quadratec.com/products/24291_7001.htm
38 to 40 inch waist? Got a ways to go for me. What options are out there for fat Americans?
Jardiance
Look at those shity welds I hope these things are like $29.95
So it's basically a grown-up carseat 🤣
waste of money.
Does anyone make an electric seat for a Jeep?