ฝัง
- เผยแพร่เมื่อ 20 ก.ย. 2024
- #MacOS #Sequoia #Proxmox #VirtualMachine
Full steps can be found at i12bretro.gith...
💡 NOTE: MacOS higher than version 12 requires a CPU with AVX2 instruction support
01. Download a MacOS Sequoia .iso archive.org/se...[]=mediatype%3A%22software%22 OR create your own • Create Almost Any MacO...
02. Download KVM OpenCore bootloader github.com/the...
03. Extract the downloaded KVM OpenCore bootloader .gz file
04. Upload the Sequoia and KVM OpenCore .iso files to the Proxmox ISO library
05. Log into the ProxMox web UI
06. Right click the ProxMox node name ≫ Create VM
07. Type MacOSSequoia in the name field, set the VM ID to 1500 (unless 1500 is in use) ≫ Next
08. On the OS tab, set the Type field to Other and select the KVM OpenCore .iso in the ISO Image field ≫ Next
09. On the System tab, set the Graphic card field to VMware compatible, BIOS field to OVMF (UEFI), Uncheck the Pre-Enroll Keys checkbox, Check the Add EFI Disk checkbox, Machine field to q35 and the SCSI Controller to VirtIO SCSI ≫ Next
10. On the Hard Disk tab, set the Bus/Device field to VirtIO Block, Disk size field to 64, Cache field to Write back (unsafe) ≫ Next
11. On the CPU tab, set Cores field to 4, Type field to host ≫ Next
12. On the Memory tab, set the Memory to 8192 or more ≫ Next
13. On the Network tab, set the Model field to VMware vmxnet3 ≫ Next
14. Verify the summary and click Finish
15. Click the MacOSSequoia VM ≫ Select Hardware from the left sub-navigation menu
16. Click Add ≫ CD/DVD Drive
17. Select the MacOS Sequoia .iso downloaded earlier ≫ Click Add
18. Right click the Proxmox node name ≫ Console
19. Run the following commands in the terminal
edit the VM conf file, change 1500 to the VM ID for the MacOSSequoia VM
nano /etc/pve/qemu-server/1500.conf
20. If running on an Intel CPU, add the following line to the bottom of the .conf file:
FULL STEPS ON GITHUB LINK ABOVE
21. If running on an AMD CPU, add the following line to the bottom of the .conf file:
FULL STEPS ON GITHUB LINK ABOVE
22. Press CTRL+W and search for ,media=cdrom
23. Delete the ,media=cdrom from the two attached .iso files (KVM OpenCore and Sequoia) and add cache=unsafe
24. Press CTRL+O, Enter, CTRL+X to write the changes to the conf file
25. Back in the Proxmox web UI, right click the MacOSSequoia VM in the left navigation pane ≫ Start
26. Click console in the left sub-navigation menu
27. At the OpenCore menu press Enter to start the MacOS installer
28. If Install MacOS isn't an option select UEFI Shell ≫ Press Enter
29. Type the following in the UEFI shell:
change to the Sequoia.iso, the disk number may be different for you
fs0:
launch the MacOS installer
System\Library\CoreServices\boot.efi
30. After a long initialization sequence the MAC OS Setup should start
31. Select Disk Utility
32. Select the VIRTIO Block Media ≫ Click Erase
33. Name the drive MacOS ≫ Set the Format to APFS ≫ Click Erase
34. Click Done ≫ Close Disk Utility
35. Click Install macOS Sequoia
36. Click Continue ≫ Click Agree ≫ Click Agree again
37. Select the MacOS disk ≫ Click Install
38. Wait while Mac OS installs files, the VM will reboot several times
39. Select your Country or Region ≫ Click Continue
40. Confirm your languages and keyboard layout ≫ Click Continue
41. Click Not Now on the Accessibility screen
42. Click Continue on the Data & Privacy screen
43. Select Not Now on the Migration Assistant screen
44. Select Set Up Later and then Skip on the Apple ID screen
45. Click Agree on the Terms and Conditions screen ≫ Agree again
46. Enter a name, user name, password ≫ Click Continue
47. Click Continue ≫ Select Use or Don't Use for Location Services
48. Pick a timezone ≫ Click Continue
49. Uncheck Share Mac Analytics with Apple ≫ Click Continue
50. Click Set Up Later on the Screen Time screen
51. Pick a theme ≫ Click Continue
52. Welcome to MacOS 15 Sequoia
Configuring Booting Without OpenCore Mounted
01. Log into the MacOSSequoia VM
02. Launch a web browser and download the KVM OpenCore EFI folder github.com/the...
03. Download MountEFI from GitHub github.com/cor...
04. Start LaunchPad from the dock
05. Search terminal ≫ Click Terminal to launch it
06. Run the following commands in the terminal window
cd ~/Downloads/MountEFI-update
chmod +x MountEFI.command
./MountEFI.command
....Full steps can be found on GitHub [link at the top]
Connect with me and others ###
★ Discord: / discord
★ Reddit: / i12bretro
★ Twitter: / i12bretro
