1970 CHEVELLE! 6.0/4L80E! STAINLESS EXHAUST PLUS CUTOUTS!
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- In this video I’m giving an overview of a 1970 Chevelle that I did a stainless exhaust on! The car has an LY6 6.0/4L80E swap. I did a 3” 409 stainless exhaust with cutouts, x-pipe, Super 44 Flowmaster mufflers, and 3” tailpipes. These cars can be a little tricky doing 3” tailpipes on but you can make it happen!
Again, thanks for watching! Don't forget to like, subscribe, and share the video!
Also follow us on Instagram and Facebook!
Instagram: business page(@mccarty.speedandfab)
Facebook: business page (@mccartyspeedfab)
I once built an A-Body with "Pypes" stainless parts. The whole damned set-up rusted badly being only 304 series SS. That was a hard-learned lesson.
I really like your car.
That’s odd, I’d be curious if the box got labeled wrong. 304 SS doesn’t rust. It will turn a gold/bronze color once it has had some heat cycles but it won’t rust.
Thanks it’s a customers car!
@@mccartyspeedandfab Right. Looks like 409. I scrapped it and found really good SS from Vibrant.
@@mccartyspeedandfab I also learned the 'magnet test' after that.
Man that looks and great. I am doing the same set on my 70 Monte Carlo thanks for post this video I be try to get it as much like yours possible.
Thanks so much!
Incredible workmanship. Never seen better.
Thanks for the kind words Robert!
You did an amazing job on Chris’ car brother! Will be recommending you to many others!
Thanks Johnathan!! I sure do appreciate it!
Looks great like I knew it would. Thanks for taking care of them.
Thanks homie! Gotta take care of good folks!
Your exhaust work is first rate. That car sounds awesome. Are you related to Ronny McCarty? 👍🏽👍🏽👍🏽
Thanks for the kind words! Not to my knowledge but you can’t ever tell! Where is he from?
Hazel hurts, Ga. I’m 68 and he’s a good bit older than me. He had a salvage yard and speed shop.
That’s Hazelhurst Georgia.
@@robertjordan9075 I know who you are talking about but we aren’t related to that set of McCarty’s!
beautiful work
Thanks! 🤘🏻🤘🏻
I have a turbo 5.3 in my step side square body and I wanna put a 6.0 and 4l80 in my wife’s 70 chevelle. Only difference would be she has flowmaster 10 series mufflers right now. I was curious what it would sound like!! Nice job
Awesome! This would definitely be a pretty close setup to give you an idea!
This is my style. Great build 👍🏻
Mine too! He has done a great job! 😎
NICE WORK !!!!
@@donking7681 thanks 🤘🏻🤘🏻
Nice car and great job on the setup. How do I get my hands on the panhard rod setup?
I believe this was a hotchkis el Camino or impala bar that he made custom brackets for! Customer did a very good job on that setup!
Beautiful work on the exhaust! Sucks no one in Memphis can hold a candle to that.
Thank you so much 👍🏻👍🏻
beautiful work sir!
Thank you!
Sweet! Always loved that body style
Yessir! I always have too!
That's a gorgeous chevelle!! Love it!
Yessir it’s one of my favorites!
Man that thing mean. Simple. You definitely should have a way more views
Thanks James! It’s definitely a neat car. The channel has definitely been at slow grow
Looks good but did they have any issues with the mufflers hanging that low?
The mufflers really don’t hang that low to be honest. Definitely not the lowest point in the system so no issues!
Great video bro super clean setup
Appreciate it Ced!
Awesome sound!!!! What series of Flowmaster ?
Thanks Ed! They were Super 44s!
Nice job! I have a question on how to get terminator x to work with the factory guages. I have a LY6 and a 4L85e, thinking of using Terminator x as well
Thanks Andre! This actually has Dakota Digital RTX gauges that look factory as well as their BIM module to allow it to communicate with the Holley setup. However you can make original gauges work but you will end up spending half or more of what the Dakota setup costs
Thank You So Much
What crossmember did you use?
He used holley/hooker engine and trans mounts! 👍🏻
Where can I get the info on the wheel size and offset front and back?
Rocket brand attack wheels. 18x8 4.5” back space front. 18x10 5.5” back space rear
Definitely would psint
Would be a great car to paint! Patina definitely isn’t for everybody!
ff TO 7:00 for the exhaust sound. . . NIce work!
Thanks Gene! The sound is what everyone comes to hear 🤘🏻